Alright so i am trying to root my phone, after i tried rooting it the phone turned off and a red triangle popped up with a !, than i went on youtube to try to fix it, so it said to hboot it, well i pressed the home button and volume button, white screen came up than its says, update has failed, older version, what should i do? Factory reset it?
please help
Thanks
Justin1717 said:
Alright so i am trying to root my phone, after i tried rooting it the phone turned off and a red triangle popped up with a !, than i went on youtube to try to fix it, so it said to hboot it, well i pressed the home button and volume button, white screen came up than its says, update has failed, older version, what should i do? Factory reset it?
please help
Thanks
Click to expand...
Click to collapse
To help, we really need more information. What state was your phone in before you tried rooting it? Did you use AAHK or HTCDEV? IF AAHK, what did the AAHK session say in the terminal on your computer? If AAHK, did you read the manual? What does the hboot menu say?
Hmm I got my phone from wisconsin, it's AT&T and I don't know amything besides that it says main version is older, update has failed while holding down power button and down volume buton, did a factory reset nothing happened..
Justin1717 said:
Hmm I got my phone from wisconsin, it's AT&T and I don't know amything besides that it says main version is older, update has failed while holding down power button and down volume buton, did a factory reset nothing happened..
Click to expand...
Click to collapse
...then how did you try to root? What method? And why on earth did you do a factory reset?
I used ace hack kit, and idk thought it would help, didn't do anything bad?
Justin1717 said:
I used ace hack kit, and idk thought it would help, didn't do anything bad?
Click to expand...
Click to collapse
I asked you a laundry list of questions in my earlier post that you haven't answered. For example, what did AAHK say? And can you boot into the phone (not the bootloader or recovery)?
okay heres the video i followed on youtube, HTC INSPIREG 4G 2.3.5 and its the first video by jonathan collins date sept 19 2012, and everything worked exactly at the point up until 7:17, its doesnt go to that screen, it shows a black screen, with red traingle on it. And how could i check the boot?
Thanks
Justin1717 said:
okay heres the video i followed on youtube, HTC INSPIREG 4G 2.3.5 and its the first video by jonathan collins date sept 19 2012, and everything worked exactly at the point up until 7:17, its doesnt go to that screen, it shows a black screen, with red traingle on it. And how could i check the boot?
Thanks
Click to expand...
Click to collapse
Um, I am not going to go looking through YouTube for link to this video and then watch it to figure out what you did. I am asking you to tell me here what state your phone was in before you started and exactly what steps you took to get it in its current state.
To boot into the bootloader turn off the phone (battery pull if you have to) and hold down volume-down and power.
OKay fine than, and what state, what do you mean what state, speak English please!
What did i just tell you? I said when i press the volume down and power, its says main version is older, update has failed.
Good luck.
Justin1717 said:
OKay fine than, and what state, what do you mean what state, speak English please!
What did i just tell you? I said when i press the volume down and power, its says main version is older, update has failed.
Click to expand...
Click to collapse
Have you read the Hack Kit site and the effen manual? that is why you missed to follow half of the process (maybe you can read this, that is in plain english: http://tau.shadowchild.nl/attn1/?p=88). Red triangle, is stock recovery as stated in the instructions on screen while running the Hack Kit.
If you are willing to hack your device, make sure that you read and are able follow instructions first. Video tutorial are useless because they skip most of the important things, such as preparing your PC to run the Kit and NEVER FACTORY RESETTING because you delete usb debugging drivers from the phone that way.
You should take advantage of the irc channel mentioned in the Effen Manual, but only if you're willing to do your homework. They're doing excellent work there, and they're ready and willing to donate their time to help you. But they're also experts at detecting who hasn't done the due diligence they request, and they won't help you if you don't do your part.
You'll need to give them what banangranola was asking you about. His point was that you're telling us that in the state your phone is in now, when you do X you see Y on the screen. That's important, but also meaningless if you can't explain exactly what you did to get your phone from its original state to where it is now. With computers especially the past is the key to the present, and doubly so when we're rooting phones and doing things that the manufacturer didn't intend general users to do. Something apparently went wrong in your execution of the AAHK script, and you need to help the experts determine exactly what went wrong so they can tell you how to get from the present state to the desired state. If you're getting the stock recovery screen I doubt you've bricked it; but you need some expert help from here because AAHK is predicated on the phone being in a certain state.
And by "state" all we mean is what has been installed/configured on the phone. When you get it from the manufacturer, it is in that original state. When you execute steps1 thru n of some procedure from Youtube or the Effen Manual or whatever, you're changing the state of the phone each time. So you need to be able to state exactly what you did and what you observed when you did it. If you don't remember parts of it or are unsure, then just say so.
glevitan said:
Have you read the Hack Kit site and the effen manual? that is why you missed to follow half of the process (maybe you can read this, that is in plain english: http://tau.shadowchild.nl/attn1/?p=88). Red triangle, is stock recovery as stated in the instructions on screen while running the Hack Kit.
If you are willing to hack your device, make sure that you read and are able follow instructions first. Video tutorial are useless because they skip most of the important things, such as preparing your PC to run the Kit and NEVER FACTORY RESETTING because you delete usb debugging drivers from the phone that way.
Click to expand...
Click to collapse
I have no idea if he is actually on that build, only that he looked at a video with that build number in the title. He hasn't yet given any information on what state his phone was/is in, even after I asked him repeatedly (in English). Therefore, I'm going to wish him luck and go on my merry way.
bananagranola said:
I have no idea if he is actually on that build, only that he looked at a video with that build number in the title. He hasn't yet given any information on what state his phone was/is in, even after I asked him repeatedly (in English). Therefore, I'm going to wish him luck and go on my merry way.
Click to expand...
Click to collapse
Yeah, that kind of behavior is annoying....now he is not answering at all. Maybe he should have read better before starting.
glevitan said:
Yeah, that kind of behavior is annoying....now he is not answering at all. Maybe he should have read better before starting.
Click to expand...
Click to collapse
Maybe he figured it out himself. If so good for him.
MidnightJava said:
You should take advantage of the irc channel mentioned in the Effen Manual, but only if you're willing to do your homework. They're doing excellent work there, and they're ready and willing to donate their time to help you. But they're also experts at detecting who hasn't done the due diligence they request, and they won't help you if you don't do your part.
You'll need to give them what banangranola was asking you about. His point was that you're telling us that in the state your phone is in now, when you do X you see Y on the screen. That's important, but also meaningless if you can't explain exactly what you did to get your phone from its original state to where it is now. With computers especially the past is the key to the present, and doubly so when we're rooting phones and doing things that the manufacturer didn't intend general users to do. Something apparently went wrong in your execution of the AAHK script, and you need to help the experts determine exactly what went wrong so they can tell you how to get from the present state to the desired state. If you're getting the stock recovery screen I doubt you've bricked it; but you need some expert help from here because AAHK is predicated on the phone being in a certain state.
And by "state" all we mean is what has been installed/configured on the phone. When you get it from the manufacturer, it is in that original state. When you execute steps1 thru n of some procedure from Youtube or the Effen Manual or whatever, you're changing the state of the phone each time. So you need to be able to state exactly what you did and what you observed when you did it. If you don't remember parts of it or are unsure, then just say so.
Click to expand...
Click to collapse
Hack Kit has been retired and so is the IRC channel....
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
bananagranola said:
Maybe he figured it out himself. If so good for him.
Click to expand...
Click to collapse
Now it is late...Hack Kit is out of service!!
Related
My father in law bought a new phone SGS on O2 and I offered to unlock it as I have unlocked my husbands last week (he's was on O2 as well but in 2.1 or 2.2.1 version I think-froyo?)
Before I continue may I say I know you guys out there know so much more than me and I really need your help. I really tried to help unlocking this phone and for hours I searched and read things like reboot, download mode, recovery mode, flashing, JKV and so many other words and letter that I could not understand. Very few I understood in the end but may have messed up badly (?).
Please, I need help and please treat me as if I were your mum or even grandma. Step by step in simple normal English please.
My father in law's version is 2.3.3
I tried unlocking it the way I unlocked my husband's but didn't work after looking for hours I thought that the best way to do it would be to downgrade from 2.3.3 (gingerbread (?)) to 2.2.1 (froyo (?)) and then unlock it.
I found this:
http://forum.xda-developers.com/showthread.php?t=1089989
and tried to follow it.
I downloaded EZRom and EZboot-Froyo-1.0.tar.md5 from the same post.
I followed:
•Download the right version from section above
•Reboot your phone into Download mode
•Connect your phone to computer
•Run EZOdin
•Select EZboot-Froyo-1.0.tar.md5 or EZboot-GingerBread-1.0.tar.md5as a PDA file in EZOdin
•Check the "Phone Bootloader Update" checkbox
•Click Start
I waited for the phone to turn off and feel the little vibration but didn't. Instead it just froze at the first screen when you turn on the phone. The black background with white letters: Samsung Galaxy...
I waited and waited and as nothing was happening I then I took the battery out. Put it back in and tried turning it on. I wouldn't it would just stop and that same screen, the black and white one.
I reread
•Wait until phone reboots and make it reboot into Recovery
SO then I remembered in the many threads I read about the recovery mode so 3 clicked vol up + button at them bottom and turn on bottom.
It gives me a few options. When I click on reboot all it does is show me the black and white screen again and nothing else. ah!!!
I took the battery off and put it back on may times, also selected the fatory reset option and tried different buttons but nothing. Please help me.
I'm happy to phone any of you guys to help me and guide me even if it's just to put the phone back to what it was before, turning on normally, etc. (I can't even turn it on!) I'm feeling really sad and a bit stressed as these days are supposed to be a nice time to spend with my little ones and family.
Anyway, please ask me anything.
Thank you so much in advance. I really hope I didn't do anything wrong and I'm just stuck because I'm ignorant in this matter. Thank you
Well, I have no skill in this area. But I wish you good luck, and this post is acting as a bump! Double goal!
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. I'll check.
From http://forum.xda-developers.com/showthread.php?t=723596 :
Darkstriker said:
(E) Recovery:
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
Most likely: YES! In almost any case, you should still be able to turn off the device (if necessary by removing the battery) and start into download-mode (VolumeDown+Home+Power) or recovery-mode (VolumeUp+Home+Power). After (for example) an unsuccessful flash, you can retry the flash in download-mode (same steps as when flashing a functioning device). If a flash to a functioning f/w (without applying any update.zip) doesn't help or you cannot get your PC to flash at all, you can ask for help here.
If you see a symbol asking you to connect to the PC, depending on how you arrived at this point, it may be sufficient to connect to the PC and run Odin (i.e. press "start" when the phone is recognized) without adding any files. This may, however, leave some residual issues if (for example) had an incorrect/incomplete flash so you may want to do a normal flash after this!
If you do not have download mode and for some ludicrous reason felt the need to go ahead and modify your firmware regardless of this lacking, there is now a guide on creating a home-made JIG which will force your device into download mode without the actual button combo here.
Click to expand...
Click to collapse
If you need any extra help, I'll try.
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
[/QUOTE]
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. [/QUOTE]
Thank u so much for your reply. O don't know what re stocking is, but i will look into it. Thank u!
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
anaki11 said:
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
Click to expand...
Click to collapse
Well, no problem, I guess. I don't think it needs to come to voice support, to be honest. I think text is enough for the issue in matter. I'll look a bit into this, I'll have to go soon from my computer. I'm sorry if I can't be of any greater help.
moses992 said:
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
Click to expand...
Click to collapse
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
anaki11 said:
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
Click to expand...
Click to collapse
In my thoughts, I believe that should be what you need. You can try, if that doesn't solve the issue, it's because you need something else as well.
And the think you should make the file a PDA file, I believe. Don't take my answer too direct. I'm almost unknown with Samsung devices on that matter, but I can say a couple of things, like, that, I'm pretty sure it is on PDA files.
And no problem, always pleasing to help someone in trouble. I was/am a rookie too Ignore the Senior Member thingie. Still a noob in pretty much everything. And don't panic, no need for that.
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
anaki11 said:
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
Click to expand...
Click to collapse
Haha. I doubt it. 99,99% of actions are reversible, really. And I have severe doubts that this is one of the remaining 0,01%.
Well, I wish you good luck. If you ever need any more help, you can post here. I'll look into here time to time.
BTW. Just wait a second. You know that link you give on the first post? There's also a Gingerbread file. You can *try* flashing that one, to see if it reverses the problem. Sounds legit to me.
Youtube.com/qbking77
He has tons of tutorials
Sent from my SPH-D700 using Tapatalk
I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app
lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.
I will have a package probably tomorrow that will provide as detailed instructions as I can.
getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.
Please, for the love of god, someone help me!!
I have spent the past 2 days trying to root my brand new Tab 2 (verizon) p3100 (android 4.1.2). I've tried every tutorial that I can find. I've tried various versions of Odin, various versions of heimdall, various versions of CWM and other rooting files. I get error after error. The device still works fine but it WILL NOT ROOT!!
I am currently trying to use Odin3 and CF Auto Root (my 100th attempt probably). Every time I use Odin, any version, any tar file, it fails with a "Fail! (Auth)" error. The message in download mode says "SECURE CHECK FAIL: recovery".
I've done a factory reset of the Tab. I've cleared cache. I've tried running Odin is an admin. I've tried different usb ports on my PC (Windows 7, 64bit).
It doesn't matter what I try, it always results in an error. This thing just WILL NOT ROOT!
Can anybody tell me what the problem is? Or another way to root? Please. This is driving me crazy!!
Thank you!!
Try this.
Huge problem
I found these instructions:
droidviews.com/how-to-root-and-install-cwm-twrp-recovery-verizon-galaxy-tab-2-sch-i705-on-ics-jelly-bean/
And finally got it to root. Then I got to the part where I installed the terminal emulator, granted it root access, and followed the instructions to install aboot.img. Then the Tab shut down, I thought it was going to reboot but it never started back up. Now I can't get it to turn on or go into recovery or download mode. Nothing. Everything was fine up to that point. Now nothing at all. How do I fix this??
ninasmith said:
I found these instructions:
droidviews.com/how-to-root-and-install-cwm-twrp-recovery-verizon-galaxy-tab-2-sch-i705-on-ics-jelly-bean/
And finally got it to root. Then I got to the part where I installed the terminal emulator, granted it root access, and followed the instructions to install aboot.img. Then the Tab shut down, I thought it was going to reboot but it never started back up. Now I can't get it to turn on or go into recovery or download mode. Nothing. Everything was fine up to that point. Now nothing at all. How do I fix this??
Click to expand...
Click to collapse
<facepalm>
Oh boy... WHY the heck did you flash a bootloader (totally unnecessary step to begin with) from a completely different device?!?! There is so much info on rooting P31xx here on XDA, describing several different methods in details, and yet you managed not only to find a way that is not even intended for your device, but to proceed with no understanding of the process whatsoever...
I would suggest to take a deep breath, and try again (and again) to get your tab started in download mode (hold Volume DOWN + Power until you see a warning screen). If you can do that, flash the proper ROM with Odin -- whatever version you can find, but the one for your device. Then promise yourself to NEVER do anything without at least a basic understanding of what you are doing.
If you can't get the download mode working, then look up the service centre. You have an option to play dumb and just say it suddenly died on you -- maybe, you get lucky and could claim the warranty.
EDIT: OK, I am really confused now... You specifically said you have a P3100, but you also mentioned Verizon. So, which one is it that you have -- GT-P3100, or SGH-i705??? These are very different devices! If you indeed have an i705, disregard what I said above (it's relevant to P3110), and start with this thread. It may not be as bad after all...
kt-Froggy said:
<facepalm>
Oh boy... WHY the heck did you flash a bootloader (totally unnecessary step to begin with) from a completely different device?!?! There is so much info on rooting P31xx here on XDA, describing several different methods in details, and yet you managed not only to find a way that is not even intended for your device, but to proceed with no understanding of the process whatsoever...
I would suggest to take a deep breath, and try again (and again) to get your tab started in download mode (hold Volume DOWN + Power until you see a warning screen. If you can do that, flash the proper ROM -- whatever version you can find, but the one for your device. Then promise yourself to NEVER do anything without at least a basic understanding of what you are doing.
If you can't get the download mode working, then look up the service centre. You have an option to play dumb and just say it suddenly died on you -- maybe, you get lucky and could claim the warranty.
Click to expand...
Click to collapse
It's not a different device. I have the Tab 2 from Verizon, which is the i705. I thought it was the same as a p3100 but I guess it's not because verizon locks it down more. The model number, listed in settings, is the i705. So I found these instructions and actually rooted it just fine using odin (finally). When it rebooted, I had super user and all was good. Until the part where it told me to do the aboot.img with the terminal emulator.
I have been trying for the past half hour and cannot get it to do ANYTHING. I've held down every combination of buttons and nothing at all. It will not turn on. It will not go into recovery. It will not go into download mode. Nothing. I plug it into the computer and it's not recognized by the PC (because it's not on). I've plugged it into the wall. Nothing. It will not do anything! I don't know what will happen if I try to take this back to Verizon.
ninasmith said:
It's not a different device. I have the Tab 2 from Verizon, which is the i705. I thought it was the same as a p3100 but I guess it's not because verizon locks it down more.
Click to expand...
Click to collapse
It's more clear now, thanks! I updated my post above, before I read your reply. i705 and P3100 are very different, not just because of customizations by VZW, but technically -- different CPU, chipset, radio module, everything.
One thing I can think of is to just leave it plugged in to the wall charger overnight, and try again. You might also want to ask your question in the respective thread that I linked above. But if you really can't get your tab to show any signs of life, you are out of luck, I guess...
BTW, here is another thread for you, related to unlocking the bootloader on i705.
kt-Froggy said:
It's more clear now, thanks! I updated my post above, before I read your reply. i705 and P3100 are very different, not just because of customizations by VZW, but technically -- different CPU, chipset, radio module, everything.
One thing I can think of is to just leave it plugged in to the wall charger overnight, and try again. You might also want to ask your question in the respective thread that I linked above. But if you really can't get your tab to show any signs of life, you are out of luck, I guess...
BTW, here is another thread for you, related to unlocking the bootloader on i705.
Click to expand...
Click to collapse
Thanks. Yeah I tried for about an hour. I had it plugged into the wall. It would not do ANYTHING at all. I took it back to Verizon and exchanged it. Now I just cross my fingers and hope they don't figure it out.
ninasmith said:
Thanks. Yeah I tried for about an hour. I had it plugged into the wall. It would not do ANYTHING at all. I took it back to Verizon and exchanged it. Now I just cross my fingers and hope they don't figure it out.
Click to expand...
Click to collapse
Good that they exchanged it for you. Better luck next time! Read those two threads I linked, it should give you enough info.
BTW, my apologies if I sounded like an a$$. To be fair, you said you had a P3100, and I didn't realize it was actually a different device until I noticed that you also mentioned Verizon. Looks like you tried to do the right thing, but somehow it went sideways. Well, sh!t happens...
Yep so I tried to install CM11
and the last thing was to:
fastboot flash boot boot.img
and that was it. Cannot restore my Nandroid backup - it doesn't boot back up.
Just gets stuck at the HTC page with "This build is for development purposes".
I think I need the stock boot.img but it is no where to be found.
Any help??
Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.
Who did you find to restore your phone?
808phone said:
Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.
Click to expand...
Click to collapse
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
so basically you paid a guy to google the right RUU???
all you had to do is check your CID (its written on fastboot) and search for that, they really arent that hard to find!!
http://forum.xda-developers.com/showthread.php?t=2140967
also if you're going to keep flashing different roms its also a good idea to keep that RUU on your pc somewhere!!
There was no matching ruu. What no one told me was that you could use a newer ruu than the one you have. Another thing, before you judge, there were no replies to help me so I had no choice. Since then look how many times I have helped others.
chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.
In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app
zubeedubs said:
In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.
808phone said:
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.
Click to expand...
Click to collapse
dude theres no need to get fassy about anything... unless your one s is knock off means that there is a RUU for your device and that you simply couldnt find one in the small amount of time that you searched for one...
and just to gnaw a little more at your flawed logic and sour attitude RUU means "ROM UPDATE UTILITY" so i guess your right in not being able to use a newer one... :good:
AND BTW.. i dont have a jtag but i do run a business and in my line of work we see folk like you everyday, ever so quick to get pi**ed at someone for THEIR OWN mistakes!!!
and maybe if youre that impatient and wound up for your own calamities it serves you right to have paid for a simple task..
---------- Post added at 08:21 PM ---------- Previous post was at 08:14 PM ----------
chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
have a peek at the RUU thread in the dev section and follow the instructions... it really isnt that difficult!!!
? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.
808phone said:
? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.
Click to expand...
Click to collapse
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!
808phone said:
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.
Click to expand...
Click to collapse
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.
same problem
zubeedubs said:
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!
Click to expand...
Click to collapse
Just to say that I
chrons6 said:
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.
Click to expand...
Click to collapse
Thankfully I finally figured out how to consistently get my phone to enter into Fastboot; however, no the trouble I'm having is finding the proper RUU. I've tried the 3 T-mobile varients available in the RUU depository found here
http://forum.xda-developers.com/showthread.php?t=2094414
But alas, while I am able to run the RUU program, which enters my phone into a mode where the screen is all black expect for the HTC logo in the middle, I keep on getting error codes. Are there more than 3 RUU varients identified in the depository?
Oh, I should note that I was also able to get into recovery, but my SD was unable to mount so I can't find my Nandroid
Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app
zubeedubs said:
Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.
chrons6 said:
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.
Click to expand...
Click to collapse
That won't help. You can fix the sdcrad bug by flashing stock recovery via fastbot and preform "factory reset + clear storage"
Ok so I am unsure if someone is filtering out OLD topics but i keep coming across FORUM posts from people and it seems like they are getting no help or being referred to NON existent topics.
I just recently bought a HTC ONE M8 H/K from sprint. I have had android for a decade and am seriously tired of the ROOT it people. so I figured why not no down falls and everyone says it is easy. Well I am Murphy last name law and you people have not seen or know the things I am about to post
I recently spent over 32 hours watching video and preparing for ROOTING. I unlocked phone got Pilz touch recovery and everything worked fine. I even got CWM and SUPERSU and Busy box. all of which needed OTHER files to work properly. Again a few forced quits everything was fine.
I wanted to Switch to TWRP and the install didnt go through. however now I have BOOTloop. trust me this is the tip of the berg at this point.
Just short of finding NO help after another 24hrs binge session on the CPU and just shy of RUNNING MY PHONE OVER WITH A DAMN CAR>
I get oh so simple easy fix and the only posts I see are FIXED IT!!! so that helps me approximately as much as my phone helps me make phone calls currently.
After the boot loop SEVERAL friends versed in this so called ROOTING (which I still find to be a hoax and not actually possible by any means at this point and time.) and no one has any clue. Tried flashing ROMS RUU's everything comes back to NO will not work.
Then it brings me to the STOCK RUU config for the HK M8 which seemed like it was going to work through ADB flash but guess what. 2 hrs idle NOTHING. after that The recovery program dropped out and boot loader only stated RUU in the menu. (something never before logged in a forum or post as I can tell) after many attempts to do GOD KNOWS WHAT WITHOUT ANSWERS as i was about to smash my beautiful gold phone into a dozen tiny peices and claim accident the Recovery came back to...... You guessed it NOTHING. All directories are UNMOUNTED and cannot be mounted.
I am stuck. Seriously you all fix my phone or help i am willing to send gifts because I am out 700$ now on this nice paperweight but everything and everyone tells me. OH SO SIMPLE you have recovery it aint no thang.
Well guess what it is and I am tired of being so PISSED OFF for something that was so automated.
Again I am Murphy and what you attempt to get me to follow will come up with some REALLY weird repercussions I will post back.
Please oh mighty gods of ruining my life. Spare me this one thing I will never ask for another again.
How do I get my phone to just WORK, Simple. Right?
Hi there! I think I found a thread that can get you back on track. Please read every word carefully and follow every step. If you have further trouble or want to clarify anything, please ask in the thread. They know the device best and can help you I'm sure.
http://forum.xda-developers.com/showthread.php?t=2503646
I'm afraid that is the extent of what we do in the XDA Assist Section. We are guides...pointing people in the right direction when they can't find what they are looking for. Unfortunately we don't do hands on support in this section, so as I said....if you need a further hand, I am sure someone in the thread I linked can help.
And make sure anything you download and flash is for your model. And as always, do a Nandroid backup in recovery... before flashing anything new....it can be a lifesaver to help restore you when you hit trouble.
Good luck!
Details
Let me re iterate.
All guides are demanding S-Off (cannot as I cannot acess phone apps to do so)
All guides need HOME access for apps to modify certain things
I cannot:
Push packet through adb as they are unreadable
Get past boot screen
Recovery is only 40% operational with visibilty of phone only working sometime.
Cannot flash
Cannot push
Cannot fastboot
Cannot see device on CPU as it is stuck in recovery
ALL DIRECTORIES in /SDCARD have been removed
No Firmware
No RUU
No img
As far as I can tell.....Phone is empty and cannot be populated with anythin. I did manage to get SuperSu pushed through and installed. But how do I open it?
No ROOT access as well in the recovery.
I followed ALL STEPS of EASY guides even downloaded one button app that runs it all for me. Can't talk to phone does not see it in ADB.
The other guide I went to was helpful but I have already attempted all of those things.
With an empty phone NO DATA and no ability to get ADB to even run data over cable I am baffled.
I did exactly like the 500 guides i read said.
1) bootlock unlock
2)instal recovery (Philzmod)
3) get CWM (retrieved from playstore) Need a .zip to run in ADB
Phone worked fine until I changed from Philz mod to TWRP which never took place. Philz mod still runs but TWRP said it installed.
Now I have a completely worthless empty phone and I have cried about a tub worth of tears over the 700 i will be dropping over the next year for a piece of metal.
Oh and 99.9% of time if ADB DOES do something either no directory once pushed, cannot read or cannot FIND/Open directory stating BAD installation aborted I NEED a better recovery
I understand your frustration. Not a fun situation at all.
As I said, XDA Assist is here to help navigate the website. Not to troubleshoot I'm afraid.
The purpose of XDA Assist... http://forum.xda-developers.com/showthread.php?t=2764768
The very best place to ask for help in your situation is right here, in the Q&A section for your device... http://forum.xda-developers.com/showthread.php?t=2764768
The people there know your device best. Start a thread that's to the point, polite and accurate....what is exactly wrong, and the exact steps you took to get there. And hopefully help will follow.
Hope it can be solved for you!