Database Info

[SOLVED] defy dead after installing 2nd init on cm7

Hi everyone.
I Had CM7 beta 6 installed on my defy, and I stupidly tried to update 2nd init, so now the cell phone is bricked.
actually I can enter on bootloader and on stock recovery, but I´m not able to flash any room.
I tried to make a factory reset and flash rooms in rsd 4.9 but the following error is shown: failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone conected.
My battery is full, I wiped, and tryed nordic rom, JRDNEM_U3_3.4.2_164, JRDNEM_U3_2.51.1_ I get the same mistake everytime.
some guy here had a problem when he installed 2nd init in cm7 just like me, but he was having other problem and solved flashing french rom. it didn´t worked for me.
any ideas??

First, you should post this on general section, ot developers forum. Just wipe all then reflash your favorite 2.2 SBF, and never try to update bootmenu in CM7 again, since it already have bootmenu.

eae cara!
sorry for posting at the wrong place.
I wiped all and tried to flash many 2.2 roms as I sayd, but Im unable to flash. Only get. failed flashing process

arthurlage said:
eae cara!
sorry for posting at the wrong place.
I wiped all and tried to flash many 2.2 roms as I sayd, but Im unable to flash. Only get. failed flashing process
Click to expand...
Click to collapse
OK, I solved my problem! I was not beeing able to flash another room because I was using RSD 4.6 instead RSD4.9.
But when I was flashing the ROM with RSD 4.9, my battery died. And I got code error.
So I Used Mcgyver showed here: http://forum.xda-developers.com/showthread.php?t=892026
to solve the baterry problem!
And my defy went back to life. almost perfect. now the touch screen is not working.

If you are from Brazil, just flash the apropriate 2.2 SBF (there's a SBF for VIVO, TIM, CLARO and a Retail version) and see if the problem persists. If yes, send it to warranty

I wiped all data and my touch it´s back to work!

[Q] Recover stuck Defy easy :)

OK first i must apologize. I have a bad spelling but u will manage to understand.
First i`ve installed CM7 update throught 2ndinit. All ok, but i`m just not geting a WOOOW. Is ok but it has a lot of glitches. I`ve managed to customize my 2.2.2 to get high performance whitout any force close and got 1000MHz throught MilestoneOverclock. After that disspointment (just for me, i`m sure that those smart guys do the best they can but 2.2.2 is just enought for me) i`ve flashed JRDNEM_U3_3.4.2_179-002...sbf directly whitout wipeing or anything that had to be done. After this it was stuck at android logo. Tried to hard reset was unable to do that. managed to enter clockworkmode but was unable 2 do anything. After searches on forum and other thing i`ve installed varios .sbf versions none worked. The last version i`ve instaled was JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF or JORDN_U3_97.21.51.sbf ofcourse the same thing happened, stucked at android logo after i`ve found a thread for recovery and i can`t remember which one but flashed Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf . After that it started ok. I`ve used CEE sbf because that is my original stock rom or the same version showned on my phone before CM7 update. I`ve googled and saw that a lot of defy users have the same problem. I sure helped me so i just wish it would help you to. If that was usefull to you please hit the thanks button. Defy is a really good small priced smartphone.
I`ve used RSD 5.3.1 in bootloader Power Defy holding power btn and volume up btn.
Dono if it can help but i think that if ur phone has a functional bootloader and a 09.10 version it will surely do the job the easyest way. Goodluck
Bine Nepoate. M-a rezolvat bine si o sa stiu pe viitor. Ms oricum de completare

If you didn't flashed a Full Gingebread SBF (2.3.4) then you shouldn't ever flash the JORDN_U3_97.21.51.sbf because this Eclair SBF has two CG with code 5. This Eclair SBF is used to go back to Froyo after flashing a full SBF of leaked GB (see more details here), therefore if you never flashed a FULL GB SBF the best approach to revive your Defy is to do a full wipe from stock recovery and then flash the official Froyo SBF for your country/region.

+1 for nepotu...i just wanted to say that i had a scare like that to the first time i reverted back to the original firmware
just wipe the phone in stock recovery (data/cache) by holding vol down and power the little android guy will show up and then press both vol up and down at the same time
and then u can flash the sbf cee for romania
remember that first boot will take longer...but i guess u know that

[Q] Atrix 2 restore problem

I use Motorola Atrix 2.I got the phone's backup through an application.I installed Costum rom to the phone but the phone is not working now.I can't restore the backup back to the original rom.It has the original rom and the backup but i can't install it in flashboot mode with RSD lite.Please help me.
{
AT&T Atrix 2
last rom orjinal 4.0.4
installed http://forum.xda-developers.com/showthread.php?t=2256194
}

ismail4040 said:
I use Motorola Atrix 2.I got the phone's backup through an application.I installed Costum rom to the phone but the phone is not working now.I can't restore the backup back to the original rom.It has the original rom and the backup but i can't install it in flashboot mode with RSD lite.Please help me.
{
AT&T Atrix 2
last rom orjinal 4.0.4
installed http://forum.xda-developers.com/showthread.php?t=2256194
}
Click to expand...
Click to collapse
If I understand well, You tried to install your backup with RSD Lite... that's not possible!. RSD Lite only works with officials firmwares, like this, That firmware works for you, only if you have the AT&T version.
PD: I f you're not sure how to use RSD Lite, please let me know XD.

ismail4040 said:
I use Motorola Atrix 2.I got the phone's backup through an application.I installed Costum rom to the phone but the phone is not working now.I can't restore the backup back to the original rom.It has the original rom and the backup but i can't install it in flashboot mode with RSD lite.Please help me.
{
AT&T Atrix 2
last rom orjinal 4.0.4
installed http://forum.xda-developers.com/showthread.php?t=2256194
}
Click to expand...
Click to collapse
Here's an explanation on how to use RSD lite:
http://forum.xda-developers.com/showthread.php?t=1909319
To be perfectly honest though, of you're attempting to restore a CWM backup with RSD lite then you have a LOT of reading to do before you permanently brick your phone. Search before posting is the number 1 rule on XDA, and for a good reason. Had you have followed that rule you would have found multiple threads detailing all the information that you need (some were even posted earlier today). Please, do yourself a favor and do your research before doing anything else to your phone.
Brought to you but time and relative dimensions in space.

[Q] Boot loop

Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!

First install ICS V30A baseband use this video (you may need to go in to the stock recovery after flashing and do a factory reset is a problem arises during flashing)
https://www.youtube.com/watch?v=FqC5qw6WRaY&feature=youtube_gdata_player
secound install WKparts bootloader and TWRP you can use a tool om this forum named simple tool can be found here everything you need is in the tool
https://www.dropbox.com/sh/p959msww1ol04s4/BUlrkRLEs7
and then load a rom on to the external SD card and flash it in TWRP or CWM touch i recomend
http://forum.xda-developers.com/showthread.php?t=2164367
if you want the newest CM although it's a bit more hassle with this 4.2.2 pacman rom as you need to delete the first line in updater script for it to work properly on ICS

@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.

@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
This what I have flashed:
Kernel-versie
3.0.21-CM+
CyanogenMod versie
10-20130908-NIGHTLY-p920
Build datum
Sun Sep 8 11:42:08 PDT 2013
Buil-nummer
cm-920-userdebug 4.1.2 JZO54K eng.
jenkins.20130908.114141 test-keys

i don't know where you can flash only the base band but the V30A haves baseband in it and it makes to that you have to flash the custom bootloader which works really good (can boot anything)

You can flash baseband with LG Flash Tool.

drastic00 said:
You can flash baseband with LG Flash Tool.
Click to expand...
Click to collapse
Can you please tell me how, step-by-step. I've read some tutorials here but they are so not easy to read because they always use so many different colors and fonts it becomes hard for me to understand what they are saying.

Mine is about as clear and detailed as you will find
http://forum.xda-developers.com/showthread.php?t=2195753

CyanogenMod NIGHTLY-p920 unstable
Gilbertvanhaasen said:
Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
Click to expand...
Click to collapse
CyanogenMod NIGHTLY-p920 unstable .
look & flash this rom http://forum.xda-developers.com/showthread.php?t=2337545

[SOLVED][Q] [HELP NEEDED] :Phone won't go past lock screen (Cannot unlock the screen)

Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?

SOLVED
Hi All,
Seems I have found an answer to this
If anyone is seeing this issue and breaking their head over this, please try again with SIM INSERTED.
Yes that was the EFFING problem

anooparavindp said:
Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?
Click to expand...
Click to collapse
Dude, you should have been on ICS to flash ROMs not JB leak.

brokenaxe said:
Dude, you should have been on ICS to flash ROMs not JB leak.
Click to expand...
Click to collapse
Kexec ROMs can run on ICS as well as JB Leak Kernels.