Hi every body,
I have a big problem with my phone.
I bought a brand new D2G yesterday and i flashed Fission 2.4.3 ROM . I really liked this rom.
Howerver now i want to unlock my phone but i can't find any where to enter the code.
And i tried to flash the rom D2_Global_OEM_RBDZ by using Fission ROM Manager (FRM).In this rom, i can enter my unlock code to unlock my phone.
But i can't do any thing in this rom,just can get the call.I can't obtain any program or setting in this rom.
So i turned back to Fission 2.4.3 ROM ....
BUT...In Fission 2.4.3 rom my phone was still locked...I tried come back D2 global OEM RBDZ again and saw that i didn't need to enter code because in this rom my phone was unlocked.........Finally i flashed to Fission 2.4.3 ROM again...
Nothing happens my phone is still locked.......
Strongly disappointed....
Pls help me solve this problem...Maybe i need to the original rom of this device...
Thanks you...
did you wipe data / cache on the phone?
Yes, i wiped data/cache on the phone.
In my case, i think that i need to restore by using the backup file which created before flashing Fission 2.4.3. But i don't have this file ,so if you have it pls sharing for me.
Your the only person that would have your phones backup file
Sent from my DROID2 using XDA App
SIM cards will not work on ROM, I thought it was on the thread post. Some sim card apps do not play nice without some blur resources. Those will be added in a next build or two ahead.
System version :
Version.34.177.3MB525.Retail.en.GB
APflex version :
GAS_EMEA_USAJRDNFRYORTGB_P019
Build number :
JOREM_U3_3.4.2_177-3
Android version
2.2.2
Full SBF :
http://www.mediafire.com/?op47dv8yo8iypj1
rachit2588 said:
ok uploading will update the links here
Here is the full official UK rom http://www.multiupload.com/GK4V4ICBIK
No problems with haptic feedback, all working fine.
Flash via rsd lite ...but before that do complete factory wipe / erase data /cache etc etc
Here is the nandroid and fixed sbf :: http://www.multiupload.com/YZTSVZ2OJ3
first restore the nandroid via Custom Recovery and flash the fixed sbf.. as usual procedures
Click to expand...
Click to collapse
Yay! Thanks.
Ah, magnificent. Thanks.
Sent from my GT-I9100 using XDA Premium App
Good job, thanks so much.
I was sick I let it through my fingers when I updated!
Thank you, I have been waiting for this ;0)
the file in the archive is dated 14.04.2011... it's genuine GB SBF?
anyway, thanks!
Downloaded this file by MSU
it's genuine GB SBF
Hi,
I have run Recuva over my file system. I could not recover the sbf, but the file name, modified time and size were found.
They match perfectly the file I downloaded from mpieq.
Cheers, as far as I'm concerned that is the real thing.
Olly
Works great! Thanks very much.
Now then... who is going to produce a theme so it looks like leaked / 2.3.3 that wouldnt work with the unfortunate green camera devices?
Andy
Was on early 2.2.1 - wanted to upgrade in case of warranty issues.
Flashed with RSD Lite. New Red Motorola logo with white rings when phone starts, but had to pull battery and re-boot manually.
Phone is upgraded with all contacts, settings etc as before.
Just had to root phone with superoneclick to get Titanium back-up and SetVSL running.
30 mins start to finish. Many thanks
NickAJ said:
30 mins start to finish. Many thanks
Click to expand...
Click to collapse
You're luck. After upgrade mine boot up but with all settings and apps restored, however it after rooting it wasn't stable. Got to do factory reset and... for a first time used TiBu to restore my apps - works flawlessly . The only issue was the lack of Polish Swype (got it with Eclair) but used the one from CEE ROM and it works flawlessly.
mine simply has lost his Haptic Feedback... it must be restarted to gain his capabilities restored. is losing also his WiFi (with error message in wifi and network settings) and the data connection...
any ideas? could be from the JuiceDefender wrong resources management?
I am on motorola defy with formware version 2.51.1. If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Does it have blur is without Blur, I ma looking for something without Blur.
With Blur or without Blur?
Sent from my Toilet using Motorola DEFY.
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
croxley said:
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Click to expand...
Click to collapse
This ROM is blurred. I flashed it over 2.2.1 (the UK 3.4.3-11 ROM), which I had previously successfully rooted via SOC (in fact, an older version, from months ago), but, as, at first, for strict test purposes, I decided not to wipe anything at all after flashing this ROM, the root condition (just like all my applications and settings) was kept as it was before. My Defy is in this very state ever since.
By the way, I haven't noticed differences between the two ROMs.
Just my 2 cents...
Regards,
Carlos
i have installed the full sbf
no problems with haptic feedback.
all looks fine and smooth..blur is also working nice ..even you can skip the setup.
just the 3g gets stucks up when the phone is idle..(the "H" is shown but the arrows ↑↓ are greyed out ..i have to reconfigure the apn and set it again to get it working.
Guys ne thoughts on this 3g problem..?? i have used defy baseband to switch my baseband for india.
EDIT :: solved the problems....i think this is problem free blur rom so far ...!! kudos to motorola uk..!!
note :: i didnt download from any links given here..i had some other source.
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
If I wanted to go from the Korean 177 base sbf with cm7 rc1 installed to this what would be the procedure? Is it as simple as doing it through rsdlite or through the 2nd init recovery?
Thanks
Sent from my MB525 using XDA App
ifu said:
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
Click to expand...
Click to collapse
Should i upload nandroid / full sbf for you..??
OK first i must apologize. I have a bad spelling but u will manage to understand.
First i`ve installed CM7 update throught 2ndinit. All ok, but i`m just not geting a WOOOW. Is ok but it has a lot of glitches. I`ve managed to customize my 2.2.2 to get high performance whitout any force close and got 1000MHz throught MilestoneOverclock. After that disspointment (just for me, i`m sure that those smart guys do the best they can but 2.2.2 is just enought for me) i`ve flashed JRDNEM_U3_3.4.2_179-002...sbf directly whitout wipeing or anything that had to be done. After this it was stuck at android logo. Tried to hard reset was unable to do that. managed to enter clockworkmode but was unable 2 do anything. After searches on forum and other thing i`ve installed varios .sbf versions none worked. The last version i`ve instaled was JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF or JORDN_U3_97.21.51.sbf ofcourse the same thing happened, stucked at android logo after i`ve found a thread for recovery and i can`t remember which one but flashed Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf . After that it started ok. I`ve used CEE sbf because that is my original stock rom or the same version showned on my phone before CM7 update. I`ve googled and saw that a lot of defy users have the same problem. I sure helped me so i just wish it would help you to. If that was usefull to you please hit the thanks button. Defy is a really good small priced smartphone.
I`ve used RSD 5.3.1 in bootloader Power Defy holding power btn and volume up btn.
Dono if it can help but i think that if ur phone has a functional bootloader and a 09.10 version it will surely do the job the easyest way. Goodluck
Bine Nepoate. M-a rezolvat bine si o sa stiu pe viitor. Ms oricum de completare
If you didn't flashed a Full Gingebread SBF (2.3.4) then you shouldn't ever flash the JORDN_U3_97.21.51.sbf because this Eclair SBF has two CG with code 5. This Eclair SBF is used to go back to Froyo after flashing a full SBF of leaked GB (see more details here), therefore if you never flashed a FULL GB SBF the best approach to revive your Defy is to do a full wipe from stock recovery and then flash the official Froyo SBF for your country/region.
+1 for nepotu...i just wanted to say that i had a scare like that to the first time i reverted back to the original firmware
just wipe the phone in stock recovery (data/cache) by holding vol down and power the little android guy will show up and then press both vol up and down at the same time
and then u can flash the sbf cee for romania
remember that first boot will take longer...but i guess u know that
Hi,
So I've tried reading to solve my problem, but didn't find quite the direct answer yet.
I've been working on installing Steel Droid v5.6 on my Droid 3. I got it rooted, and then installed the modified safestrap by Rick#2. I feel like I shoulda stuck to the original.
My questions are:
What is the exact different between safe and unsafe mode in the safestrap. Which one should the custom ROM go on?
How can I be sure I have my original files saved, incase I decide to abandon a custom ROM.
Thanks
Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?
SOLVED
Hi All,
Seems I have found an answer to this
If anyone is seeing this issue and breaking their head over this, please try again with SIM INSERTED.
Yes that was the EFFING problem
anooparavindp said:
Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?
Click to expand...
Click to collapse
Dude, you should have been on ICS to flash ROMs not JB leak.
brokenaxe said:
Dude, you should have been on ICS to flash ROMs not JB leak.
Click to expand...
Click to collapse
Kexec ROMs can run on ICS as well as JB Leak Kernels.