My sidekick had a water damage and now it doesn't charge and the wifi doesn't work it turns on and turns off after a minute or two. Since I live in Pakistan, I can't get it repaired. Does anybody know which phone's motherboard I can exchange it with, like which samsung phone's motheboard's parts will be compatible with it? Or where can I get the motherboard from if available online?
I don't think you're going to have much luck swapping the motherboard with another model. The SK4G is pretty unique as far as hardware goes.
If you want to attempt a repair, I think your best bet would be to buy a parts phone. I picked up a SK4G with a shattered screen on eBay for $30.
The only board that works in a Sidekick 4G is the Sidekick 4G. No others can be used.
Related
Hi guys,
My htc fell in water, but I have dried it up. Now when I press the power key, the screen does not turn on. Then, when I press it again to supposedly off the screen, the screen turns on and off in 1second. So I can catch a glimpse of the lockscreen. So I was wondering, does anyone know why this is happening?
Is this a problem I can fix myself or should I bring it to a repair shop?
Any recommendation on a repair shop besides HTC. HTC did not even bother to look at my phone, they just saw the water indicator and said it would be $300-$500, which in fact, I know that it would not be that much.
So if anyone could help me, thanks.
I'll upload a youtube video so you guys can get a better understanding.
http://www.youtube.com/watch?v=TBVeprvekgY
Had the same accident on my wifes last Nokia, couldnt repair it myself and brought it to a repair shop. They told me to throw it away because the water sensor inside the phone reported the accident audn a repair would be as expensive a an equal ne phone. sorry mate, dont hope too much ...
I guess I shall just get a new phone, like an evo 3d or something. Thanks anyway
Or they can replace the parts that's been damaged. But i'm not sure if the repair costs more than buying a new phone.
I believes LCD internal circuit detect short and turns of lcd to prevent damage.
LCD may still have water inside or main board may have been damaged.
It is impossible to guess so repair tech must use parts from good phone and swap one by one to bad phone until bad part is found.
Most repair shop will not have ability to do this so they will charge minimum $200 ( average cost for them to buy phone) or they will assume LCD is defective and quote about $150. ( their charge for LCD replacement)
HTC just charges you phone refurb charge ( for customer not their cost)
I recommend sell on eBay for $150 and buy new(used phone) on Craigslist($200-$250).
I assume since you are asking this question you don't do many or any repair...if this is true...I highly suggest you keep it that way to prevent accidental and uneccesary damage
PM me and I can assist with repair/replacement
Sent from my HTC Sensation using XDA App
I was kinda hoping to fix it, but I guess I should go to HTC and ask them for an exact amount of price needed to fix this phone.
I doubt there's anymore water in the phone cause I have dried it for 3days in rice and even hair dryed it.
About to replace my LCD and digitizer after an accident that has left my phone useless
I found a guide online and the items needed.
any heads up or pointers I should know about before doing this?
I hope you have insurance... First time I tried to open something electronic up, I cracked the screen! (ipod) be careful man
Sorry to hear man, but before you do anything you aren't really comfortable with I would suggest looking at some local cell phone repair shops. My brother cracked his LG G2x and the price for the digitizer was abour $75. We searched on yelp.com and called around and found a great shop that would repair it for $95 within two hours. Some places were charging well over $100 and would take at least 5 days to repair.
In the end though my brother was extremely happy with the experience and once he got his phone fixed he flashed a new ICS rom and it was literally a brand new phone! Good luck though my friend.
I cannot stress it enough, get an HTC digitizer! I bought a $30 one off of amazon and it gave up after a month. Get a cell phone tool kit and plenty of the two sided tape, just in case the screen needs to be redone. It's not hard to do, it just requires some time and a little patience. You'll do fine.
Sent from my HTC Glacier using Tapatalk
Phandemic said:
Sorry to hear man, but before you do anything you aren't really comfortable with I would suggest looking at some local cell phone repair shops. My brother cracked his LG G2x and the price for the digitizer was abour $75. We searched on yelp.com and called around and found a great shop that would repair it for $95 within two hours. Some places were charging well over $100 and would take at least 5 days to repair.
In the end though my brother was extremely happy with the experience and once he got his phone fixed he flashed a new ICS rom and it was literally a brand new phone! Good luck though my friend.
Click to expand...
Click to collapse
It's not that I don't feel comfortable with it, just never attempted it. I've done small electronics repair before though so i'm sure this will be fine.
Also thanks,
I'll let you guys know how it goes.
I'm replacing my wife's digitizer soon but I got a cheap one off eBay. Hopefully it doesn't have issues. It comes with a kit including the tools needed. Supposedly.
phone wont work after replacing the screen.
any ideas y it wont work,
The phone won't boot up at all? or is the touch screen not working?
Make sure all the ribbon cables are properly connected and are not broken. If not, you might have gotten a defective screen replacement.
RE:
Hi,
I replaced my digitizer.
To anybody who will do this in future, when you put the new digitizer in place, make sure that no dust or other things get under the glass.
Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?
I just tore one down, the LCD and digitizer in it was toast and so was the main part of the board but I should have the cable your talking about at home, I'll post a pic when I get home
Sent from my myTouch_4G_Slide using Tapatalk 2
chaostic_2k1 said:
Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?
Click to expand...
Click to collapse
eBay isn't as bad as people make it out to be...
In fact it's the sellers that are at more of a disadvantage than the buyer. Paypal will almost always side with the buyer, even if they're telling blatant lies. Sold a fully working item to the buyer, and the buyer claimed it did not work. Paypal forced me to give him a refund and accept a return no matter what I said. And when I got the item back, "surprise, surprise" item worked fine.
As long as you do your homework and ask the appropriate questions before buying, you should be fine. Try some parts ebay lots. They have some great deals
-Experienced eBayer
I've had a fair bit of success on eBay with parts for a number of phones. I've replaced a whole frame for a MT3GS, a full back with buttons and battery for a iPhone 3G, a MT4GS speaker, and several digiziters for iPhones (3G / 3GS), MT3GS, MT4G and MT4GS.
I try to use US based shippers for quicker shipping times and better odds on communicating if there is an issue.
No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Good part atleast, I found a old razor v3 that i had planned on unlocking almost 2 years ago, charged it and got the unlocking done in a few minutes. A working phone for now, makes replacement or parts a little less urgent.
chaostic_2k1 said:
No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Click to expand...
Click to collapse
Well I totally understand that sentiment. I've been there as well. The MT3GS I have was an eBay pick that was advertised as a 4G Slide. It was my first HTC phone so I didn't notice the picture didn't match. The price was a STEAL for a 4G Slide but only decent for a 3G Slide. I ended up giving the seller a neutral feedback. Since then I've been a bit anal about calling sellers out when they list a 3G Slide or 4G as a 4G Slide. Most have fixed the listings.
Having said that, I've been on the other side of the coin too. I picked up a 4G for my daughter that supposedly was soft bricked with a bad digitizer and volume buttons. I found that the button issue was just a matter of cleaning everything. From there I was able to reflash the latest stock ROM and the phone was good.
I normally just search google with specific part names that I need. Yes a lot take you to ebay, but that's normally ok, good prices!
I don't really like ebay - been burnt a lot through there. Pretty much only use it for carebears for my lady. Great place for that.
No one suggested checking craigslist for local deals?
If I don't get it through the forums here - that's where i've bought my other phones from and it's worked out well.
I bought my spare parts here
http://www.etradesupply.com/catalogsearch/result/?q=mytouch+4g+slide
Although it's still shipping.
Ok, ive given up hope of un bricking my tf300, and probably will never buy another asus product after this. My question is, should i replace the motherboard in mine, or put my screen and digitizer in another tab that i can buy for about the same price as a motherboard? Which would be the easier swap, and can someone like me without any special skills even accomplish this kind of thing? Oh yea thank u all for ur help in the past!!
Either is an easy fix, but I stole the digi/lcd combo and the TS board from my TWRP bricked 16GB to replace the cracked digi on a recently acquired 32GB model. I should be able to recoup some more from the non-logic board parts remaining, enough to more than make sense over buying a logic board alone. The battery, TS board, and good LCD alone might take care of it. If not, then maybe including all the little parts and cables inside will. Even if it is more effort to post and sell all that stuff, it should add up to more than selling a parts tablet with a broken digi and bricked logic board.
But then, I've had many tablets apart, and I'm decent at repairing them. Someone who has never had one apart might find either path daunting.
If doing the repairs yourself isn't a good option, you could always take the tablets to a cell phone repair shop, assuming there's one near you. Replacing the screen on a tablet is similar enough to a smartphone that they shouldn't have any problems. There's also a chance that they fix tablets anyway since they're kind of like big smartphones in the way they're assembled. And since you have your own parts, the repairs shouldn't be too expensive.
Putting the ILLA in KILLA since 1985
My device recently survived quite the impact, the screen got shattered, top right edge got deformed a little and then the ON/screenlock button stopped working the next day, but otherwise the phone was fully functional. So I sent it back to LG for repairs and the next week I get it back in the same condition, with a note saying it's not repairable/board cracked. I called them up, and got an image of the motherboard showing no cracks whatsoever, yet they still didn't want to re evaluate their conclusion when I created a new RA. When I got the phone back the battery was dead and even though I charge it I cant turn it on, until the button is replaced. LG suggested I contact Google for repairs, Google said I should contact LG. These people are helpless, they don't know anything. I could do the repairs myself, but I can find all the required parts online. Can I get some suggestions on my next step?
"Thank you for contacting LG Customer Service.
We are sorry to hear about the problem you are experiencing with your LG device, however, your phone has already been inspected by our technitians at our repair facility and, unfortunately it has been determined that it is not repairable.
We recommend you contact your carrier for any replacement possibnility."
not much to do but to repair it yourself if you want then, or maybe look for one on swappa?
for parts http://www.etradesupply.com/lg/android-models/lg-nexus-5.html or ebay
btw it looks like you need this http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html
Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?
Maybe its best to sell it for parts and buy a new one, that phone looks allmost like a total-loss. Maybe some of the internals are damaged also and total repair would be too expensive.
ImAShark said:
Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?
Click to expand...
Click to collapse
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/
Kresshy said:
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/
Click to expand...
Click to collapse
I've done the repair on a Galaxy S3 using the part from Ebay. Let me tell you now that it is a pain in the ass if you don't have good micro-soldering skills. I don't, lol, but my father does and he got it done for me. Be warned, you will mess up the board if you don't know what you're doing, but it can be done. Maybe find someone local who can do the swap for you.
buy a new one, cause this one is a dissaster! keep it for repairing parts...