Related
Hey guys.. I droped my touch pro about a week ago onto concrete and need a few replacement parts.. I haven't dropped a phone for years when I have had much cheaper phones and now I get a decent one this happens!
The phone actually still works 100% but is in a horrible state.. the digitzer has smashed but somehow still works, theres a key missing from the keyboard and the case is a bit munted, I will attach photos if I can.
I called 3 places in australia;
#1 HTC direct who said send it to us for a quote and we may be able to fix it ($38.50 for the quote and $11 to courier it back)
#2 A htc approved repair centre who said $170 for the screen and $110 for the keyboard.. I got into an argument with their receptionist saying the lcd is fine I just need the digitzer but she was adament they are one and the same.
#3 The vendor where I got the phone, who said their repair centre could fix it but I would have to send it to there for a quote ($35 for quote and $15 postage back)
So from what I can see I'm looking at around $300 from one place or pay $50 to another place for just the quote and they may not come back any cheaper..
I am confident enough to pull the phone apart and repair it myself.. don't have much to lose.. (I actually replaced the phone with a touch HD the next day.. sort of like drown your sorrows by replacing it with something better) As the touch pro wouldn't turn on and I figured it was completely dead..
On closer inspection a few days later I found the battery terminals had bent and wern't contacting, I bent them back and it turns on and works now)
I just want to replace the broken parts because it's a horrible mess!
I found a store on ebay selling the digitzer for $60 which is around what I would expect to pay, waiting to hear back from them if they can source a keyboard and the internal case parts, I thought someone on here might know where I can source these parts outside of Australia?
pics are below.. hope they work (warning: not for those with a weak stomach! )
Here you go
http://mobile.brando.com.hk/prod_list.php?dept_id=039&cat_id=1149
It would be easier to just buy the lcd with digitizer already installed
http://mobile.brando.com.hk/prod_detail.php?prod_id=03799&dept_id=039&cat_id=1149
US$88.00
Here's the complete housing with keyboard.
http://mobile.brando.com.hk/prod_detail.php?prod_id=03811&dept_id=039&cat_id=1149
US$85.00
Thanks, you're a lifesaver! the only trouble is that keyboard is different to mine I think the keys would probably all line up and work but you would have to know which one was which (the symbols and punctuation ones would be hard) if I can't get the right one I'll probably order from there but if anyone knows where I can get the correct keyboard that'd be even better
Happy to help
Let me see if I can find you the touch pro keypad.
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
If you were here I would hug you, I have no idea how you found that so fast, maybe I was looking in the wrong places (scouring ebay and google australia) but I've been looking for hours! can now order all the parts I need to turn it into a brand new phone
Out of interest, when you say it's easier to get the screen with the digitzer already installed, is there a reason for that? I see digitizers advertised everywhere seperately, and thought they were an entirely seperate part to the LCD, or are they connected via a bunch of fragile edge connectors? I'm happy to pay the extra $44 to get the lcd / digitzer combo if theres a risk of screwing up seperating them but if it's not a hugely risks job then I wouldn't mind saving the cash..
Thanks so much d3th metal
Hey mate, i got a big f'ing scratch down my brand new fuze. Would love to know how this goes, if you get the digitizer or full screen. As im going to try and polish it out, but i dont hold much hope. So i think this is going to be the only way.
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
sanche13 said:
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
Click to expand...
Click to collapse
Yeh the way to do it is to use a razor blade. It will definitely take some time though and a lot of patients.
This would be awesome for a sticky. It would provide anyone who needs help with getting parts for their touchpro/raphael/fuze if they decide they need it.
D3TH METAL said:
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
Click to expand...
Click to collapse
Would be I able to replace this keyboard with the one on my Fuze, I know i would have to figure out how to map all the buttons right, but would it fit correctly
Please pm me, Thanks
HELP
Did any1 buy anything from the mobile.brando.hk? If so pls tell me if I should get the replacement touch screen from them. My touch pro is full of anoying rainbow scratches
Antenna
Does anyone know where I can find a replacement internal bluetooth antenna wire?
I have a boot up Touch pro from HTC not AT&T, but just not go to the operation mode! Screen is prefect condition no starch, will come with screen protector. The outside case is prefect condition, Anyone want it? I will like to sell it for 120 dollar including OEM box, everything ALSO come with the SEIDIO case with clip. Please PM me for any question. Thanks
Hello all,
For the past 2 months, I have been facing various problems with my VOX. First, the display was not working properly. Then, the spring between the two halves started sticking out. Next, suddenly, after I restarted the phone, I saw that the display was blank. I thought that there might be some problem in the cable connection between the two halves. On closer inspection, I saw that a plastic like cable(presumably, the connection between the two PCBs) had got cut. Also, due to an earlier mishap, my receive call button had broken.
I would like to know if my phone is salvageable, and if yes, at what cost.
Presumable repairs needed:
1: keypad replacement
2: possible display replacement
3: maybe the connector between the two halves needs to be replaced.
4: connector between the two halves needs to be replaced.
I would like to get a rough idea as to how much will it cost to effect these repairs from the authorized service centre and if it will be worth going through at all.
I like this phone for its versatility and do not want to replace it without giving it a benefit of doubt.
Hoping to hear from you all as soon as possible.
Akshay
The authorised service center will charge approx 1000 for serving as labour and fitting charges. and rates for genuine spares if u buy them from service centres are
keypad - Rs. 600
display - Rs. 3200
connector - dont know
but still, after so much expenditure, they still wont guarantee for it to work though!
so, dyu think its time for me to let go of the phone??
If yes, then i have been looking at a few models, what do you think about the new samsung marine or star 3G??
Or suggest me a phone below Rs.10k and having maximum features... touchscreen is optional
If you are really affectionate to your VOX, then i'll suggest you to buy another VOx because i would have done the same.
else you can look for more mobile phones at poorvika.com, indiagsm.com, compareindia.com or gsmarena.com. but do tell me the one you buy.
try ordering online at ebay. i ordered mine for 42 US dollars just arrived 2 weks ago. Its an orginal housing front and back and including front and back keyboard. Il look again for the buyer and post his name here. Too bad fpc keypad is not included. But the housing is original.
Just get the service manual from winmodaco for htc vox
ditch it....
I went to the service centre. the guy there sed that the whole thing will cost a minimum Rs.3000 upto 70% of the phone cost ie. Rs.7000.
I think its time for me to move on [sob][sob]...
ah well, the phone served me well during its time....
goodbye HTC....
will post my new phone selection when i get it.
akshayc1111 said:
I went to the service centre. the guy there sed that the whole thing will cost a minimum Rs.3000 upto 70% of the phone cost ie. Rs.7000.
I think its time for me to move on [sob][sob]...
ah well, the phone served me well during its time....
goodbye HTC....
will post my new phone selection when i get it.
Click to expand...
Click to collapse
I would suggest you to go for Gene, its a really good phone for just 9 K
Addicted2xda said:
I would suggest you to go for Gene, its a really good phone for just 9 K
Click to expand...
Click to collapse
I think after using vox u can never be satisfied with Gene.
Vox is far much better, specially for those who love to watch video and movies on their phones since the video quality in GENE is far more inferior than VOX. but one thing is for sure that GENE in cheaper than vox but price hardly matters if u want satisfaction.
SAHILISTHEBEST said:
I think after using vox u can never be satisfied with Gene.
Vox is far much better, specially for those who love to watch video and movies on their phones since the video quality in GENE is far more inferior than VOX. but one thing is for sure that GENE in cheaper than vox but price hardly matters if u want satisfaction.
Click to expand...
Click to collapse
watching tv on smartphone is jus like bikking in home ))
no... It is much better than a home theatre if u have good subwoofers and a 'htc to 3.5 mm' jack.
akshayc1111 said:
I went to the service centre. the guy there sed that the whole thing will cost a minimum Rs.3000 upto 70% of the phone cost ie. Rs.7000.
I think its time for me to move on [sob][sob]...
ah well, the phone served me well during its time....
goodbye HTC....
will post my new phone selection when i get it.
Click to expand...
Click to collapse
Well I like Asus handsets very much after HTC .You can look for asus.
yogusmilu said:
Well I like Asus handsets very much after HTC .You can look for asus.
Click to expand...
Click to collapse
is there any asus mobile within 10K. if yes, i would love to buy. I too like them. they are good!
SAHILISTHEBEST said:
is there any asus mobile within 10K. if yes, i would love to buy. I too like them. they are good!
Click to expand...
Click to collapse
Yes there is one PDA Asus P320 which comes around 9k.But I like its Asus P527 most .Its looks as well as its features are far better than Vox.It will cost you around 12-13k..I am also planning to buy the same.
Good Luck !
Yogusmilu
Update
Sorry for reviving the thread, but I need your opinion on the topic again.
The service center guy told me that there was a complete hardware failure( too obvious, cos the torn cable between the two halves were clearly visible)
He said that it would take Rs.10k($200 approx) for complete repair. This mindblowing charge made me gulp and i took the cellphone back. Coming back to home, I saw that the guy was just citing the obvious as he had most definitely not at all opened the phone and tested it for any other faults. So, i took up matters in my own hands and opened my phone(finally). Well, I had nothing to lose and hence, went ahead. After opening the phone, I saw that one the springs in the sliding apparatus had loosened, and come in the way of the cable. The flimsy cable had gotten caught and hence, had got torn due to sliding of the two halves.
In the end, after complete disassembly, I saw that the only visibly damaged part was the cable between the two halves. I cannot see any reason to charge 10k for that. So i am planning to go to the repair center and show him the damaged part only and ask him to replace it. Searching the net, I found that the replacement part for the rigid flex board( I believe that's what it is) is $89( mebbe totally $100 approx after shipping charges, etc..).
So, do I go ahead and order the replacement from the net and reassemble the whole thing on my own, or do I not risk it?
I am gonna buy a new phone anyway, mostly the samsung marine. It looks good, albeit the small screen.
what i think is, you should post some pics to show us. someone might be know what wrong with your phone.
also we not know what exact problem hardware you are facing. if you have extra money why not to take a risk. same to me when im trying to replace a ribbon cable in my hermes. the shop said it will be cost 80usd/280myr. so i decide to not repair it and let it be...
now im happy with my vox and kaiser...
I am in a catch 22 situation. I have to take a photo of my damaged vox, but my vox is the only decent camera in my house. Neways, to give you a rough idea of what is broken, I will attempt to photoshop a stock image of the component.
The site from where i obtained the image( http://mobile.brando.com.uk ) was selling the same for $38+$3(shipping). I want to know if this site can be trusted and also, what are the chances for me to fix the vox at home without any further damage.
When I opened the phone, I saw that the connection was pretty delicate, So, I am a bit cautious of a home repair.
PS: here is the link of the product: http://mobile.brando.com/htc-s710-rigid-flex-board_p03852c1023d088.html
@RxenDrav: If the site is good, you too can check for your item there.
Plz help...
K ppl nebody hv ne idea what shud i do now? shud i risk 35$ or go for a new phone?
akshay, unfortunately im not profesional and dont have any experience in dissamble or repairing htc vox. but i'd done before on my hermes..
Someone here should help akshay fixing their vox...Anyone out there? we need help here!
also akshay you also can buy a used vox from your indian friend check here http://forum.xda-developers.com/showthread.php?t=554896
ask him
hi akshay,
instead of wasting your Rs. 2000 (approx), you can buy a second hand vox for Rs. 3000 (approx) at gaffar market in new delhi. Since i saw many of them being sold there yesterday. You can get a 'never disassembled' phone instead of disassembling your phone and then reassembling your phone.
I have faced this many times, that each time my vox has been disassembled, everytime a new problem arises. So dont be so sure even after buying that abovementioned part. I think you can look for a used vox in pune also. u can easily find a cheap and gud one.
regards
sahilisthebest
Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?
I just tore one down, the LCD and digitizer in it was toast and so was the main part of the board but I should have the cable your talking about at home, I'll post a pic when I get home
Sent from my myTouch_4G_Slide using Tapatalk 2
chaostic_2k1 said:
Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?
Click to expand...
Click to collapse
eBay isn't as bad as people make it out to be...
In fact it's the sellers that are at more of a disadvantage than the buyer. Paypal will almost always side with the buyer, even if they're telling blatant lies. Sold a fully working item to the buyer, and the buyer claimed it did not work. Paypal forced me to give him a refund and accept a return no matter what I said. And when I got the item back, "surprise, surprise" item worked fine.
As long as you do your homework and ask the appropriate questions before buying, you should be fine. Try some parts ebay lots. They have some great deals
-Experienced eBayer
I've had a fair bit of success on eBay with parts for a number of phones. I've replaced a whole frame for a MT3GS, a full back with buttons and battery for a iPhone 3G, a MT4GS speaker, and several digiziters for iPhones (3G / 3GS), MT3GS, MT4G and MT4GS.
I try to use US based shippers for quicker shipping times and better odds on communicating if there is an issue.
No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Good part atleast, I found a old razor v3 that i had planned on unlocking almost 2 years ago, charged it and got the unlocking done in a few minutes. A working phone for now, makes replacement or parts a little less urgent.
chaostic_2k1 said:
No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Click to expand...
Click to collapse
Well I totally understand that sentiment. I've been there as well. The MT3GS I have was an eBay pick that was advertised as a 4G Slide. It was my first HTC phone so I didn't notice the picture didn't match. The price was a STEAL for a 4G Slide but only decent for a 3G Slide. I ended up giving the seller a neutral feedback. Since then I've been a bit anal about calling sellers out when they list a 3G Slide or 4G as a 4G Slide. Most have fixed the listings.
Having said that, I've been on the other side of the coin too. I picked up a 4G for my daughter that supposedly was soft bricked with a bad digitizer and volume buttons. I found that the button issue was just a matter of cleaning everything. From there I was able to reflash the latest stock ROM and the phone was good.
I normally just search google with specific part names that I need. Yes a lot take you to ebay, but that's normally ok, good prices!
I don't really like ebay - been burnt a lot through there. Pretty much only use it for carebears for my lady. Great place for that.
No one suggested checking craigslist for local deals?
If I don't get it through the forums here - that's where i've bought my other phones from and it's worked out well.
I bought my spare parts here
http://www.etradesupply.com/catalogsearch/result/?q=mytouch+4g+slide
Although it's still shipping.
My device recently survived quite the impact, the screen got shattered, top right edge got deformed a little and then the ON/screenlock button stopped working the next day, but otherwise the phone was fully functional. So I sent it back to LG for repairs and the next week I get it back in the same condition, with a note saying it's not repairable/board cracked. I called them up, and got an image of the motherboard showing no cracks whatsoever, yet they still didn't want to re evaluate their conclusion when I created a new RA. When I got the phone back the battery was dead and even though I charge it I cant turn it on, until the button is replaced. LG suggested I contact Google for repairs, Google said I should contact LG. These people are helpless, they don't know anything. I could do the repairs myself, but I can find all the required parts online. Can I get some suggestions on my next step?
"Thank you for contacting LG Customer Service.
We are sorry to hear about the problem you are experiencing with your LG device, however, your phone has already been inspected by our technitians at our repair facility and, unfortunately it has been determined that it is not repairable.
We recommend you contact your carrier for any replacement possibnility."
not much to do but to repair it yourself if you want then, or maybe look for one on swappa?
for parts http://www.etradesupply.com/lg/android-models/lg-nexus-5.html or ebay
btw it looks like you need this http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html
Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?
Maybe its best to sell it for parts and buy a new one, that phone looks allmost like a total-loss. Maybe some of the internals are damaged also and total repair would be too expensive.
ImAShark said:
Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?
Click to expand...
Click to collapse
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/
Kresshy said:
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/
Click to expand...
Click to collapse
I've done the repair on a Galaxy S3 using the part from Ebay. Let me tell you now that it is a pain in the ass if you don't have good micro-soldering skills. I don't, lol, but my father does and he got it done for me. Be warned, you will mess up the board if you don't know what you're doing, but it can be done. Maybe find someone local who can do the swap for you.
buy a new one, cause this one is a dissaster! keep it for repairing parts...
Hello fellow Nexus 4 users.
http://imgur.com/a/mDmv2
I replaced my N4 screen after an unfortunate drop with a replacement assembly available on eBay for approx £35 including frame, digitizer and LCD.
The colours of the screen were appalling. See images in the link. There are counterfeit screens circulating.
May our N4s live on forever more!
cookiem0nster said:
Hello fellow Nexus 4 users.
http://imgur.com/a/mDmv2
I replaced my N4 screen after an unfortunate drop with a replacement assembly available on eBay for approx £35 including frame, digitizer and LCD.
The colours of the screen were appalling. See images in the link. There are counterfeit screens circulating.
May our N4s live on forever more!
Click to expand...
Click to collapse
Sorry to hear that. Today you can get anything fake from ebay.
Though, it wouldn't be bad if you put link to that buyer or item
The seller has dealt with the issue well so far, I'm not sure they knew they were selling a fake screen. I will post further details if I am not compensated/refunded.
Are you certain it's a counterfeit and not a re-sold piece that had actually failed QA/QC?
I don't think it's possible for an authentic screen to be of such poor quality. You could be right - I dont know much about LCD manufacture
Wondering if it is even worth replacing these parts on a phone that's over 2 years old. Not sure about pricing in UK but here in the US you can pick up a mint or refurbished one for close to the price you paid. If I busted my N4 I think I would prob have to move on and get a newer phone although I would miss perhaps the most perfect phone ever made.
I'm actually debating what to do with a N5 I have with a cracked screen sell it as is or try and find a replacement. The problem I'm Runing into is finding a stock LCD that is not cracked and makes sense price wise. If only I had a screen seperator the stupid glass can be had for $5.
kgiri247 said:
Wondering if it is even worth replacing these parts on a phone that's over 2 years old. Not sure about pricing in UK but here in the US you can pick up a mint or refurbished one for close to the price you paid. If I busted my N4 I think I would prob have to move on and get a newer phone although I would miss perhaps the most perfect phone ever made.
I'm actually debating what to do with a N5 I have with a cracked screen sell it as is or try and find a replacement. The problem I'm Runing into is finding a stock LCD that is not cracked and makes sense price wise. If only I had a screen seperator the stupid glass can be had for $5.
Click to expand...
Click to collapse
This is the sad truth I've just discovered. I dropped my phone a few months back and now have an unresponsive stripe across my screen...I went looking for a screen replacement to find out I'd only save about $30 as opposed to buying a used mint condition N4. It's not worth the aggravation of doing all that work just to save a couple bucks, IMHO.
Yes I agree. I'm now debating getting a LCD separation machine and try to salvage the digitizer and LCD. Anyone ever attempt such a job?
kgiri247 I know this isn't the place to talk about selling phones but if you do want to sell it I'll more than happily take it off your hands, inbox me if you want to talk numbers! What I do know about separating the LCD and Digitizer is that it's very risky, they're two very delicate pieces of hardware and any mistakes could lead to having an expensive paperweight until you could find a replacement screen for it!
Yeah, it's getting to be a tough decision for a home who has something go wrong on these. I love this phone though as well as the development community for it. I might keep this phone just because the development community is excellent.
However if I had to get a new phone, I saw Amazon is selling the Kindle Fire phone unlocked for $199
Sent from my Nexus 4 using XDA Free mobile app
as far i can see on your images, your screen is original and coming from LG, how many months do you have it? do you have any other synthom than yellowish colours??
Have you double a check for how many fingers you can press? The N4 is 10 right, but some of the really cheap screens only support 5. You'll know very quickly whether it's fake or not.
bought a replacement screen for the n4 and the screen is horrible. has 2 dead pixels and the viewing angles are the worst ive ever seen on a cellphone.
gaboempyrean said:
bought a replacement screen for the n4 and the screen is horrible. has 2 dead pixels and the viewing angles are the worst ive ever seen on a cellphone.
Click to expand...
Click to collapse
If it's too good to be true, it usually is I'm afraid. The most expensive parts of a mobile phone are usually the screen and the battery, seeing as both are advanced pieces of technology. Processors, RAM, motherboards etc are cheap in reality, that's why you can buy a pretty powerful Android TV stick for cheap. No battery, no screen.
Nexus 4's are cheap nowadays, smash a screen, it probably isn't worth buying another screen unless you can be guaranteed of OEM'ness. It isn't all that hard to replace a digitizer though, so if your LCD panel is good, it might be worth giving it a try.
Where would you be able to buy a genuine part then?
Is this something you should bite the bullet and send to LG for repair to atleast be guaranteed a genuine part?
Edit
Sorry for bumping an old thread.
I just had mine replaced by LG for a defective ribbon cable which left the touch screen complete unresponsive. I went this route due to all the complaints about bad screens. $160 later, my N4 looks and works great! Pretty expensive though.
I had ordered a replacement from a seller within the US on eBay. I can't seem to find the sale anymore, but it was the real deal.
I had purchased a Nexus 4 and it came with a crappy replacement display, so I ordered a new one and did the swap myself.
It looks like a whole new phone.
Thanks for the info guys!
I'm from the UK like op and I was considering getting the replacement screen myself from ebay but I don't know if the seller replaced the part he gave to op and if it was genuine because they do have some good fakes on ebay.
I might just bite the bullet and do it myself I don't know the price for repair here Reeves360 but I'm sure it'll be similar to what you paid.
These phone manufacturers still charging extortionate prices on a nearly 3 year old phone.
I've long wondered about the legitimacy of the replacement screen I got off eBay. I bought from a seller that had sold a ton of them and had excellent feedback. But the screen always seemed like it was dim (had to crank it all the way up to be as bright as my other devices at 2/3-3/4 max brightness, plus the color is very cool/bluish. But it was always responsive and never had any ghost touches.
However, a couple days ago, it has started to freak out. Occasionally, after touching it, the bottom half or so flashes black. Somtimes it's one flash, sometimes it's a few flashes. It still responds perfectly while doing this, but it's obviously not normal. I disassembled it, gave the connectors a whack of Deoxit and ProGold, and reassembled it, but the glitching still remains, so it's not the connector. I need to try flashing something different (or maybe just dirty flashing LS again) to see if it's ROM or kernel related. I made some changes to Hellscore settings and I finally figured out why my battery life was so atrocious the last few months (it somehow got set minimum 2 cores online), so it's possible I screwed something else up.
If the problem is that it's a fake screen, I doubt the seller was aware.
It was the kernel (settings). Not sure what caused it, but I reflashed the kernel, reinstalled HK manager, and the screen hasn't glitched out since.