Database Info

Broken Screen: Million Dollars Question PLEASE READ!!!

I have recently broke my XDA screen.
Does anybody know if the screen of the IPAQ 3630 is the same as the XDA? Is there any hardware modification to be done or the connectors are ALL the same?
People at Microsoft told me the Wallaby was designed after the Ipaq 3630, so most of the parts, including the screen should be the same.
Please advise. It could be helpful for a lot of people fouled by O2 with CRAZY requests for fixing the screen.

The ipaq 3600 series screen is bigger.

I have no idea about what you asked, but I would really like to know how you broke your screen?

shtali said:
I have no idea about what you asked, but I would really like to know how you broke your screen?
Click to expand...
Click to collapse
it is very easy to make the screen break ... just drop your XDA, it happened to one of my XDAs
regards, monika

i drop mine about 5x a day...(scratches on case, looseing that wen vibrates, it rattles alot)...thats why im SERIOUSLY lookin for a dummy model, but everytime i try to check on ebay, the auctions are over...so i tried going to TMO stores, or where ever they carry them, always ask the sales ppl if they could just sell me the model, an they never want to :roll: i jus tell em to order an extra one, an say sumone stole the old one....but since theyr too stcuk up to get a few extra $$$$ in there pockets, ima just have to "take" one

Basically the screen has imploded. I was talking, the screen went on power saving mode, and when ended the call it was broken.
O2 asked me too much money to repair, but I am sure the screen of the IPAQ 3630 is the same size, already checked.
Has anyone tried to open up both devices and check it?
Just want to know if connectors are the same.
Thanks

yes, my friend did open the device .... not mine but the similar unit - MDA, seems like it is a sony make, but according to his words IPAQ screen will not fit
BTW I have the same problem - I have two machines - one MDA with broken but functioning screen and XDA I do operate on a daily basis, I can make calls from both units ... but hesitating between repair and sale as is
regards, monika

gabbaid said:
Basically the screen has imploded. I was talking, the screen went on power saving mode, and when ended the call it was broken.
O2 asked me too much money to repair, but I am sure the screen of the IPAQ 3630 is the same size, already checked.
Has anyone tried to open up both devices and check it?
Just want to know if connectors are the same.
Thanks
Click to expand...
Click to collapse
You must have the only ipaq 3630 that has a screen the same size as xda1, I have one in front of me and I will eat my shirt on camera if you manage to get it into the xda1.

although I am not going to eat my shirt :lol: but I agree that screen sizes are different
regards, monika

cruisin-thru said:
I will eat my shirt on camera if you manage to get it into the xda1.
Click to expand...
Click to collapse
will it be web casted?
:wink:

I broke my screen by dropping it face down on a stone 1 week after buying it. I was insured by O2 for £4.99 a month and the next day I recieved a brand new one with all the accessories and I only had to return the main unit. I now have 2 batteries, headphones, cradles etc.

Butler said:
I broke my screen by dropping it face down on a stone 1 week after buying it. I was insured by O2 for £4.99 a month and the next day I recieved a brand new one with all the accessories and I only had to return the main unit. I now have 2 batteries, headphones, cradles etc.
Click to expand...
Click to collapse
Do you fancy selling all those XDAII extra's

Sorry, I find them really usefull, I have the cradle next to my bed and one attatched to my desktop. The spare battery is allways usefull as the main batteries are not very goo. that leaves me with a headset and a dummy SD card which i am sure are not very usefull to you. If it happens again I will contact you. Adam

OEM Replacement Shell/Case?

I dropped mine the other day while in the slip case and just my luck, it landed right on the top where the only exposed part of the phone is.
Now I have a nice ding in the top near the headphone jack.
I called HTC and they didn't have an exact price quote but sounds like their minimum cost is $170.
That seems a little excessive to replace the shell/case.
On the the question, has anyone seen OEM replacement shells/cases for the N1 available?
Or maybe another solution to getting my phone fixed? I was planning to sell it off in the near future when the next best thing comes out but fear that this will seriously hinder my ability to sell it for a reasonable price.
Thanks!
- Fescen9

same problem here..
If you bought from HTC, I'd like to know the price please.

interesting solution would be to send in your phone to colorware, http://www.colorwarepc.com/p-216-nexus-one.aspx
, you can pick a color, its only 5 bucks more than 170$, and will probably make your phone cost more

Give it some time...eventually places like cnn.cn will carry every replacement part for the phone. They already have the digitizers and things like trackballs.

di2356 said:
interesting solution would be to send in your phone to colorware, http://www.colorwarepc.com/p-216-nexus-one.aspx
, you can pick a color, its only 5 bucks more than 170$, and will probably make your phone cost more
Click to expand...
Click to collapse
Damm wish they had this in the UK

Replacing LCD+digitizer

About to replace my LCD and digitizer after an accident that has left my phone useless
I found a guide online and the items needed.
any heads up or pointers I should know about before doing this?

I hope you have insurance... First time I tried to open something electronic up, I cracked the screen! (ipod) be careful man

Sorry to hear man, but before you do anything you aren't really comfortable with I would suggest looking at some local cell phone repair shops. My brother cracked his LG G2x and the price for the digitizer was abour $75. We searched on yelp.com and called around and found a great shop that would repair it for $95 within two hours. Some places were charging well over $100 and would take at least 5 days to repair.
In the end though my brother was extremely happy with the experience and once he got his phone fixed he flashed a new ICS rom and it was literally a brand new phone! Good luck though my friend.

I cannot stress it enough, get an HTC digitizer! I bought a $30 one off of amazon and it gave up after a month. Get a cell phone tool kit and plenty of the two sided tape, just in case the screen needs to be redone. It's not hard to do, it just requires some time and a little patience. You'll do fine.
Sent from my HTC Glacier using Tapatalk

Phandemic said:
Sorry to hear man, but before you do anything you aren't really comfortable with I would suggest looking at some local cell phone repair shops. My brother cracked his LG G2x and the price for the digitizer was abour $75. We searched on yelp.com and called around and found a great shop that would repair it for $95 within two hours. Some places were charging well over $100 and would take at least 5 days to repair.
In the end though my brother was extremely happy with the experience and once he got his phone fixed he flashed a new ICS rom and it was literally a brand new phone! Good luck though my friend.
Click to expand...
Click to collapse
It's not that I don't feel comfortable with it, just never attempted it. I've done small electronics repair before though so i'm sure this will be fine.
Also thanks,
I'll let you guys know how it goes.

I'm replacing my wife's digitizer soon but I got a cheap one off eBay. Hopefully it doesn't have issues. It comes with a kit including the tools needed. Supposedly.

phone wont work after replacing the screen.
any ideas y it wont work,

The phone won't boot up at all? or is the touch screen not working?
Make sure all the ribbon cables are properly connected and are not broken. If not, you might have gotten a defective screen replacement.

RE:
Hi,
I replaced my digitizer.
To anybody who will do this in future, when you put the new digitizer in place, make sure that no dust or other things get under the glass.

MT4gS parts? Where to find?

Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?

I just tore one down, the LCD and digitizer in it was toast and so was the main part of the board but I should have the cable your talking about at home, I'll post a pic when I get home
Sent from my myTouch_4G_Slide using Tapatalk 2

chaostic_2k1 said:
Since the marketplace is closed, where is anyone finding replacement parts (aside from ripoffbay)? The digitizer in my mom's phone died, no response at all, and the stupid ass design of the phone won't even let you answer a incoming call without moving the ring. To make it worse, while I opened it to check for damage on the inside, I broke the front center button ribbon, and the right hand side front button pcb. The whole setup of supergluing every single part of the lcd is insane ARG.
So I need pretty much the entire upper lcd assembly, and with the market gone, does anyone know where to find one? Or just MT4GS parts in general?
Click to expand...
Click to collapse
eBay isn't as bad as people make it out to be...
In fact it's the sellers that are at more of a disadvantage than the buyer. Paypal will almost always side with the buyer, even if they're telling blatant lies. Sold a fully working item to the buyer, and the buyer claimed it did not work. Paypal forced me to give him a refund and accept a return no matter what I said. And when I got the item back, "surprise, surprise" item worked fine.
As long as you do your homework and ask the appropriate questions before buying, you should be fine. Try some parts ebay lots. They have some great deals
-Experienced eBayer

I've had a fair bit of success on eBay with parts for a number of phones. I've replaced a whole frame for a MT3GS, a full back with buttons and battery for a iPhone 3G, a MT4GS speaker, and several digiziters for iPhones (3G / 3GS), MT3GS, MT4G and MT4GS.
I try to use US based shippers for quicker shipping times and better odds on communicating if there is an issue.

No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Good part atleast, I found a old razor v3 that i had planned on unlocking almost 2 years ago, charged it and got the unlocking done in a few minutes. A working phone for now, makes replacement or parts a little less urgent.

chaostic_2k1 said:
No, I know that, i've sold on ebay as well, its A) this phone is frustrating as hell, and B- the thing with private sellers, you get a bit better experience with as-is phones for parts, for a decent price. Like if someone on here had said, oh, I bricked the phone, no physical damage, I can expect to get a working lcd/digitizer/camera/etc. On ebay, it's a gamble on as-is and I've been burnt before on it.
Click to expand...
Click to collapse
Well I totally understand that sentiment. I've been there as well. The MT3GS I have was an eBay pick that was advertised as a 4G Slide. It was my first HTC phone so I didn't notice the picture didn't match. The price was a STEAL for a 4G Slide but only decent for a 3G Slide. I ended up giving the seller a neutral feedback. Since then I've been a bit anal about calling sellers out when they list a 3G Slide or 4G as a 4G Slide. Most have fixed the listings.
Having said that, I've been on the other side of the coin too. I picked up a 4G for my daughter that supposedly was soft bricked with a bad digitizer and volume buttons. I found that the button issue was just a matter of cleaning everything. From there I was able to reflash the latest stock ROM and the phone was good.

I normally just search google with specific part names that I need. Yes a lot take you to ebay, but that's normally ok, good prices!

I don't really like ebay - been burnt a lot through there. Pretty much only use it for carebears for my lady. Great place for that.
No one suggested checking craigslist for local deals?
If I don't get it through the forums here - that's where i've bought my other phones from and it's worked out well.

I bought my spare parts here
http://www.etradesupply.com/catalogsearch/result/?q=mytouch+4g+slide
Although it's still shipping.

[Q] LG refuses to repair; what should I do?

My device recently survived quite the impact, the screen got shattered, top right edge got deformed a little and then the ON/screenlock button stopped working the next day, but otherwise the phone was fully functional. So I sent it back to LG for repairs and the next week I get it back in the same condition, with a note saying it's not repairable/board cracked. I called them up, and got an image of the motherboard showing no cracks whatsoever, yet they still didn't want to re evaluate their conclusion when I created a new RA. When I got the phone back the battery was dead and even though I charge it I cant turn it on, until the button is replaced. LG suggested I contact Google for repairs, Google said I should contact LG. These people are helpless, they don't know anything. I could do the repairs myself, but I can find all the required parts online. Can I get some suggestions on my next step?
"Thank you for contacting LG Customer Service.
We are sorry to hear about the problem you are experiencing with your LG device, however, your phone has already been inspected by our technitians at our repair facility and, unfortunately it has been determined that it is not repairable.
We recommend you contact your carrier for any replacement possibnility."

not much to do but to repair it yourself if you want then, or maybe look for one on swappa?
for parts http://www.etradesupply.com/lg/android-models/lg-nexus-5.html or ebay
btw it looks like you need this http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html

Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?

Maybe its best to sell it for parts and buy a new one, that phone looks allmost like a total-loss. Maybe some of the internals are damaged also and total repair would be too expensive.

ImAShark said:
Screen and battery are no problem, i could replace them any day. The power button (blue circle in the pic) doesn't work, if that's the issue, I would need to replace it, but I can't find any replacements. I actually spotted a tiny crack on the board (red circles). Ugh. Would i have to replace the whole thing?
Click to expand...
Click to collapse
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/

Kresshy said:
I have issues with the power button too because mine get stuck lot of times and it's verry annoying. I've contacted LG service center but they said that because it is soldered to the mainboard the only option to repair is to change to mainboard. I'm shocked . I haven't got warranty here because I bought it on Play Store in Canada and I'm living in Europe.
Btw I've started to research this issue and the parts and it seems these switches are the same as Samsung uses in their new galaxy phones. There are tons of pieces on ebay from it. But changing it is hard. You need a good heat gun which is able to point the heat to a small area and you have to heat the switch only. If you heat any other parts, then you phone is dead...
http://www.youtube.com/watch?v=F0xMMn1DRWs
But I'm not hundred percent sure that these are good switches for us, they just look the same :/
Click to expand...
Click to collapse
I've done the repair on a Galaxy S3 using the part from Ebay. Let me tell you now that it is a pain in the ass if you don't have good micro-soldering skills. I don't, lol, but my father does and he got it done for me. Be warned, you will mess up the board if you don't know what you're doing, but it can be done. Maybe find someone local who can do the swap for you.

buy a new one, cause this one is a dissaster! keep it for repairing parts...