Related
http://www.droid-life.com/2013/04/1...galaxy-s4-devs-begin-to-salavate/#more-105631
This is exciting! Who here bets on full featured CM?
-.-.-.-.-.-.-.-.-
Sent from a dark and unknown place
Galaxy Tab 2 7.0 P3100
Sorry, but there's already a thread about this...
SammyDroidWiz said:
http://www.droid-life.com/2013/04/1...galaxy-s4-devs-begin-to-salavate/#more-105631
This is exciting! Who here bets on full featured CM?
-.-.-.-.-.-.-.-.-
Sent from a dark and unknown place
Galaxy Tab 2 7.0 P3100
Click to expand...
Click to collapse
Samsung and any other companies always give the android kernel source, it is a must as stated in the linux kernel license.
This is not what CM needs.
Sent from my GT-I9300
i9505 uses Qualcomm so CM devs won't have a problem with it.
The i9500 on the other hand will need sources for the Exynos Octa which Samsung will probably never release. Kernel source isn't enough.
Most CM maintainers are not interested in this device and ha e no plans on working on it. So while kernel source is great. People are better off picking up develolment themselves.
Wayne Tech S-III
late to the party man. old news
Good evening..
Will there be an official CyanogenMod 10.1.0 for the Samsung galaxy S2 plus [i9105p]?
Thanx
Hi geisha508,
I don't think CM will support the device yet. If the unofficial build is well tested and fulfills the requirements (read about them at http://wiki.cyanogenmod.org/w/Doc:_Submitting_A_Port) it may be possible.
thanks for the link ...
I hope that maybe it still works.
would be a shame because the phone is really good.
from samsung it will probably be no Android 5.0 if we are lucky maybe 4.2
Guys, today ciwrl form CyanogenMod has posted an weekly update, where you can read:
Intel SDP
Intel’s representatives sat with us for a quick chat at DroidCon and graciously gave us one of their Software Development Platforms! The special Galaxy Tab 3.0 went home with Shane and he will (hopefully) use it as a head-start on adding x86 support into CM. Watch this space for more in the future.
Click to expand...
Click to collapse
This is news only for Samsung Galaxy Tab 3 10.1 since only 10.1 version of GalaxyTab 3 is powered by Intel Atom chip (x86 architecture) (Tab 3 7.0 is Cortex A9 ARM, Tab 3 8.0 is Samsung Exynos 4 ARM).
Keep your fingers crossed!
Polarkreis said:
Guys, today ciwrl form CyanogenMod has posted an weekly update, where you can read:
This is news only for Samsung Galaxy Tab 3 10.1 since only 10.1 version of GalaxyTab 3 is powered by Intel Atom chip (x86 architecture) (Tab 3 7.0 is Cortex A9 ARM, Tab 3 8.0 is Samsung Exynos 4 ARM).
Keep your fingers crossed!
Click to expand...
Click to collapse
Any news from the front?
Yeah I'm looking for more info on this as well. Anything or links would help
no news since November 13.....i need cm on my tab3 10.1 !
greetz
Please bring CM to my gt 3 10.1, i know it has way more power than what it puts out with samsung bloatware
clpetty said:
Please bring CM to my gt 3 10.1, i know it has way more power than what it puts out with samsung bloatware
Click to expand...
Click to collapse
any news on this
I think we are out of luck. All focus will be on the new tab 4 series very soon. It's just a shame. Development hasn't went very well on this device because of the intel cpu, (I guess) I wish I had bought the tab 2 10.1.
Tquarter said:
I think we are out of luck. All focus will be on the new tab 4 series very soon. It's just a shame. Development hasn't went very well on this device because of the intel cpu, (I guess) I wish I had bought the tab 2 10.1.
Click to expand...
Click to collapse
Is it really a lost cause?
Tab pro(tab 4?) has exynos 5
I sold mine 2 months ago, then...my S4 -.- I'm still grieving
Shezed said:
Is it really a lost cause?
Tab pro(tab 4?) has exynos 5
Click to expand...
Click to collapse
Oh im sure the development community will be all over the tab 4 family. You can get jellybean on your home pc (dual boot with windows) but this device seems to be an orphan. At least samsung hasn't abandoned it yet. They say we will get kitkat.
Here is the link if you want jellybean on your pc. It really is pretty cool.
http://www.android-x86.org/releases/releasenote-4-4-rc1
Tquarter said:
Oh im sure the development community will be all over the tab 4 family. You can get jellybean on your home pc (dual boot with windows) but this device seems to be an orphan. At least samsung hasn't abandoned it yet. They say we will get kitkat.
Here is the link if you want jellybean on your pc. It really is pretty cool.
http://www.android-x86.org/releases/releasenote-4-4-rc1
Click to expand...
Click to collapse
I just tried this. I installed android alongside windows fine but when I got to the android welcome screen it was super laggy and rebooted once. Any ideas? I have two AMD 77770's running maybe I should just run a single GPU and see if that works.
i'm looking forward onto this, because i dont want the stock on my tab 3 10.1 its very laggy.
Hope this ain't no fake.. Really looking forward on running CM on our family phone.
jdawg2485 said:
I just tried this. I installed android alongside windows fine but when I got to the android welcome screen it was super laggy and rebooted once. Any ideas? I have two AMD 77770's running maybe I should just run a single GPU and see if that works.
Click to expand...
Click to collapse
Hmmm I have a dell optiplex core 2 duo 3 ghz with stock intel graphics, and its usable. Some folks say they loaded it on their old pc's with 478 intel cpu's and say it made them faster than xp was. I have no proof of that, but that's what they said in some comments I found. It doesn't run that fast on my old pc. I wonder if there is anything in it that would help angel666 in the CM project.
jdawg2485 said:
I just tried this. I installed android alongside windows fine but when I got to the android welcome screen it was super laggy and rebooted once. Any ideas? I have two AMD 77770's running maybe I should just run a single GPU and see if that works.
Click to expand...
Click to collapse
Also changes the date and time on windows after I try to run Android. It would be pretty cool if it wasn`t so damn laggy. Maybe someone can look into it if I post my rig`s specs. **** I don`t know I`m just trying to help Here`s my specs:
------------------
System Information
------------------
Time of this report: 4/3/2014, 22:29:42
Machine name: JDAWG-PC
Operating System: Windows 8.1 Pro 64-bit (6.3, Build 9600) (9600.winblue_gdr.131030-1505)
Language: English (Regional Setting: English)
System Manufacturer: To be filled by O.E.M.
System Model: To be filled by O.E.M.
BIOS: BIOS Date: 10/20/10 09:47:36 Ver: 08.00.10
Processor: AMD FX(tm)-6200 Six-Core Processor (6 CPUs), ~4.4GHz
Memory: 8192MB RAM
Available OS Memory: 8138MB RAM
Page File: 3319MB used, 13011MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode
Polarkreis said:
Guys, today ciwrl form CyanogenMod has posted an weekly update, where you can read:
This is news only for Samsung Galaxy Tab 3 10.1 since only 10.1 version of GalaxyTab 3 is powered by Intel Atom chip (x86 architecture) (Tab 3 7.0 is Cortex A9 ARM, Tab 3 8.0 is Samsung Exynos 4 ARM).
Keep your fingers crossed!
Click to expand...
Click to collapse
i know the original is from sep of 2013 but has anyone else heard anything about CM for Tab 3 (10.1)
Some Threads under this there is one:
http://forum.xda-developers.com/showthread.php?t=2792872
There is a current alpha from CM11 for the P5200 (3G + WiFi) with some Small Bugs, no Sound and No Kamera.
xTear said:
Some Threads under this there is one:
http://forum.xda-developers.com/showthread.php?t=2792872
There is a current alpha from CM11 for the P5200 (3G + WiFi) with some Small Bugs, no Sound and No Kamera.
Click to expand...
Click to collapse
Can you please give me a direct link to post about WiFi variant? I'm reading this thread since it opened and couldn't find any working builds for p5210. There's a P5210 boot.img and mine build.prop but after flashing it ends in Samsung Galaxy Tab 3 for me ...
If anyone could compile a build for P5210 it would be great.
Regards
Gesendet von meinem SM-N910F mit Tapatalk
LegendSmoker said:
Can you please give me a direct link to post about WiFi variant? I'm reading this thread since it opened and couldn't find any working builds for p5210. There's a P5210 boot.img and mine build.prop but after flashing it ends in Samsung Galaxy Tab 3 for me ...
If anyone could compile a build for P5210 it would be great.
Regards
Gesendet von meinem SM-N910F mit Tapatalk
Click to expand...
Click to collapse
i think there is no current build for the P5210, but could u post the logcat log? it could help to port..
xTear said:
i think there is no current build for the P5210, but could u post the logcat log? it could help to port..
Click to expand...
Click to collapse
Is there a way to get logcat of from system wich is not booting?
Gesendet von meinem SM-N910F mit Tapatalk
The 4.3 upgrade just started rolling out for the S3 and now we also have the kernel sources : http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=I9300
The “update12″ file is the one you’re looking for, with version XXUGMJ9.
What does this mean to the average user? Will this be integrated into something like CM or would I need to flash this separately? Sorry if this is a dumb question.
Roseysdaddy said:
What does this mean to the average user? Will this be integrated into something like CM or would I need to flash this separately? Sorry if this is a dumb question.
Click to expand...
Click to collapse
This is only for i9300 - this source has no bearing on i747 other than to confirm that it may eventually be released to i747
i9300 is the international version and has a different chipset than the i747 (or other US variants).
Latest rumor mill points to 11/13 as official release date for AT&T 4.3 btw
lgstoian said:
The 4.3 upgrade just started rolling out for the S3 and now we also have the kernel sources : http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=I9300
The “update12″ file is the one you’re looking for, with version XXUGMJ9.
Click to expand...
Click to collapse
how about i9305?
czechpunk said:
This is only for i9300 - this source has no bearing on i747 other than to confirm that it may eventually be released to i747
i9300 is the international version and has a different chipset than the i747 (or other US variants).
Latest rumor mill points to 11/13 as official release date for AT&T 4.3 btw
Click to expand...
Click to collapse
This forum is the for international Exynos based S3 and Note2.
d2att is a completely different device and story.
The S3 kernel source applies to I9300, I9305, N7100, N7105 and all t0lte.
Not 100% but about 98%
victorator said:
This forum is the for international Exynos based S3 and Note2.
d2att is a completely different device and story.
The S3 kernel source applies to I9300, I9305, N7100, N7105 and all t0lte.
Not 100% but about 98%
Click to expand...
Click to collapse
This forum is for qcom and exynos Samsung S3 + Note 2 actually.
And he's clearly saying that it doesn't apply to the I747.
Help PL
victorator said:
This forum is the for international Exynos based S3 and Note2.
d2att is a completely different device and story.
The S3 kernel source applies to I9300, I9305, N7100, N7105 and all t0lte.
Not 100% but about 98%
Click to expand...
Click to collapse
so can this kernel be used with my s3 i9305?
lgstoian said:
The 4.3 upgrade just started rolling out for the S3 and now we also have the kernel sources : http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=I9300
The “update12″ file is the one you’re looking for, with version XXUGMJ9.
Click to expand...
Click to collapse
Hi , does it mean we will have custome kernels for our devices ??
mervingeo said:
so can this kernel be used with my s3 i9305?
Click to expand...
Click to collapse
Which kernel. The discussion was about sources.
If one takes the source and compiles it for the lte variant of the s3, it works.
keemo.rom said:
Hi , does it mean we will have custome kernels for our devices ??
Click to expand...
Click to collapse
If your device was already having custom kernels of older sources... Yes.
Gesendet von meinem GT-N7105 mit Tapatalk 2
Good afternoon
@manojkumar8552, @gody420, @mahir kukreja, @weritos,
Folks
I would like just a little times by u and look for this, I was analyzing and comparing the Core 2 Duos with our Win Duos. This link below is a homepage here from Brazil where we can compare devices and their similarities.
The core 2 like the old Core is very similar with win , its armv7 and Quadrcore processor. On lasted release by Samsung this device was update to 4..4..2 Kitkat version and i think so this build can be help us to fix RIL to CM11 project
What u think ? Would like ur opinion
MJ
http://www.tudocelular.com/compare/2636-2445.html
http://www.devicespecifications.com/en/model-cpu/c7bd2c38
Lasted realese
http://www.sammobile.com/2015/02/24...alaxy-alpha-galaxy-s5-galaxy-core-2-and-more/
mjraogr said:
Good afternoon
@manojkumar8552, @gody420, @mahir kukreja, @weritos,
Folks
I would like just a little times by u and look for this, I was analyzing and comparing the Core 2 Duos with our Win Duos. This link below is a homepage here from Brazil where we can compare devices and their similarities.
The core 2 like the old Core is very similar with win , its armv7 and Quadrcore processor. On lasted release by Samsung this device was update to 4..4..2 Kitkat version and i think so this build can be help us to fix RIL to CM11 project
What u think ? Would like ur opinion
MJ
http://www.tudocelular.com/compare/2636-2445.html
http://www.devicespecifications.com/en/model-cpu/c7bd2c38
Lasted realese
http://www.sammobile.com/2015/02/24...alaxy-alpha-galaxy-s5-galaxy-core-2-and-more/
Click to expand...
Click to collapse
device code name
SM-G3556D