[Q] Cannot get Verizon update to work - Verizon Samsung Galaxy S III

Over the past month or so I have tried several times to update my S3 with the Jelly Bean update from Verizon. Each time I try it I get a message that the software failed to install.
O I need to unroot the phone and lock the bootloader in order to update? Anyone else had this problem? Right now I am on Android version 4.0.4 and I think the update is 4.1.2.

I believe for the official update you have to be unrooted and have a locked bootloader unless you do it from kies where it can revert it complete to stock and unroot it.
Sent from my SCH-I535 using xda app-developers app

djteotancolis said:
I believe for the official update you have to be unrooted and have a locked bootloader unless you do it from kies where it can revert it complete to stock and unroot it.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You are 100% correct. Update will fail due to custom recovery. OP, why not download one of the many JB ROMS from the development section and flash it? Not only will it update your phone, it will be much better than stock as well as easier to install.

HHF2 said:
You are 100% correct. Update will fail due to custom recovery. OP, why not download one of the many JB ROMS from the development section and flash it? Not only will it update your phone, it will be much better than stock as well as easier to install.
Click to expand...
Click to collapse
I have not yet ventured into flashing other ROMS but am certainly willing to give it a try. I know there are many available but can you suggest one or two that i can try.

Really tough to suggest a ROM, there are a lot of different options depending on what you are looking for. Clean ROM is pretty much stock that has been optimized, I would probably start there since you have only done stock. You can then make a nandroid and flash other ROMS and see which one you like the best.
Just remember, read all of the stickies so that you have everything backed up in case something goes wrong. It takes less time to read and learn it before you have a problem and then don't have what you need to fix it nor the know-how.

Okay, so I download a ROM zip file. I copy it to me microSD card. I have TWRP on my phone. I assume I just go into recovery mode, wipe the cache and Dalvik cache and then just install the zip via TWRP. Is that all I need to do?

Never mind. I just flashed the Jelly_Beans10 ROM and it works fine.

Related

[Q] Samsung Update stopped by ClockworkMod

Hello Everyone,
I'm fairly new to rooting phones and ROMs so if this question dosn't make sense please destroy my inner child I have a rooted sgs3 using odin and factory verizon build but the problem I am having is with ClockwordMod I think. The samsung update restarts the phone but ClockworkMod starts up right away and won't let the update go through. Is there a setting I need to change to allow all updates to bypass ClockworkMod or is there another way for me to get the update?
Any help is much appreciated.
Justin
Sounds to me like cwm just saved you from an auto ota update.
I use twrp so i dont know the answer to your question but if you're rooted, why would you want an ota?
Update
maniac2k said:
Sounds to me like cwm just saved you from an auto ota update.
I use twrp so i dont know the answer to your question but if you're rooted, why would you want an ota?
Click to expand...
Click to collapse
Hello and thank you for the reply. I'm not sure that I need/want it though it continues to ask me to update so it's either keep saying defer or just let it update.
Of you download and flash one of the latest and greatest roms, you wont get asked to update. There is a way you can stop the ota but i dont remember off the top of my head. Im sure google knows. I would just flash a newer rom that includes the update.
hmmmm
maniac2k said:
Of you download and flash one of the latest and greatest roms, you wont get asked to update. There is a way you can stop the ota but i dont remember off the top of my head. Im sure google knows. I would just flash a newer rom that includes the update.
Click to expand...
Click to collapse
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
ndjustin20 said:
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
Click to expand...
Click to collapse
Well I have beans 12 and woke up and my phone also was booted into recovery and stopped the update.
Sent from my SCH-I535 using Tapatalk 2
ndjustin20 said:
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
Click to expand...
Click to collapse
It is going to keep rebooting into CWM if you don't tell it to until you tell it to stop rebooting to recovery, which is an option in the menu system after flashing. If the OTA update installation is being intercepted by CWM's presence on your phone, then I'm not sure if there is a way around it other than flashing a ROM. Someone with more experience will have to chime in.
With that said, should you choose to install a new ROM, there are a plethora of ROM options on XDA, at least some of which have OTA updates disabled. See the following link for a guide (I'm assuming you are on Verizon):
http://forum.xda-developers.com/showthread.php?p=32079760#post32079760
You can flash the stock, rooted ROM back on with ODIN, and then download EZ-Recovery (which has CWM) and load a custom ROM that way.
I use aokp but jellywiz is a nice stock like rom. Just download a rom and flash in cwm.
ndjustin20 said:
Hello Everyone,
I'm fairly new to rooting phones and ROMs so if this question dosn't make sense please destroy my inner child I have a rooted sgs3 using odin and factory verizon build but the problem I am having is with ClockwordMod I think. The samsung update restarts the phone but ClockworkMod starts up right away and won't let the update go through. Is there a setting I need to change to allow all updates to bypass ClockworkMod or is there another way for me to get the update?
Any help is much appreciated.
Justin
Click to expand...
Click to collapse
If you want the update you should flash back to stock and restore the stock recovery. You can reroot and unlock the boot loader after you update.
Im having same issue. Verizion trying to force my phone to have less features. I was able to ignore it 2 weeks ago but now it keeps trying to force the update and I can keep delaying it. Any good tools you all know of to just block ota updates all together? Pretty happy with stock rom as is no need to fix it minus the copy and paste bug.
You can use Titanium Backup to freeze SDM 1.0 and the update will quit downloading. I'm not sure if freezing apps is supported in the free version but the paid version is well worth it of you plan on switching ROMs.
You could also flash Scotts stock rooted Rom with the latest update, then your phone status will say up to date. I flashed the zip right on my phone through cwm but I'm sure you can use Odin too
Sent from my SCH-I535 using xda app-developers app
I was in the exact same situation as you. The phone will not update with Clockwork Recovery installed. I simply flashed back to the stock ROM via ODIN (stock.vzw_root66 which a quick search should locate), accepted the OTA update, and then used the beginner's guide in the Android Development forum to get back root.
I use Titanium Backup to freeze SDM 1.0. Like JBO1018 wrote, the PRO version is well worth the price, if only to freeze bloatware. Everything else it offers is gravy.
Questions go in Q&A
Thread moved
Thanks

[Q] Help with upgrading from GB to ICS via Kies

So I had downloaded Kies and it was ready to upgrade my blaze to ICS, but I read that the phone should be unrooted first. So I did this:
http://forum.xda-developers.com/showthread.php?t=1591601
Apparently that was a mistake. Now I get the following error in Kies:
"Your device does not support software upgrading via Kies" "Current firmware version: PDA:LB7 / PHONE:LF4 / CSC:LB7 (TMB)"
Should I have just upgraded without unrooting? Why is it telling me this? I thought this was the stock ROM? If I keep flashing me Blaze with different ROMs without completely reformatting, will that slow it down?
You gotta go back to the OG rom before the first update.... If u look there is a thread about it on here somewhere
Sent from my SGH-T769 using xda app-developers app
WhaleWithWings said:
So I had downloaded Kies and it was ready to upgrade my blaze to ICS, but I read that the phone should be unrooted first. So I did this:
http://forum.xda-developers.com/showthread.php?t=1591601
Apparently that was a mistake. Now I get the following error in Kies:
"Your device does not support software upgrading via Kies" "Current firmware version: PDA:LB7 / PHONE:LF4 / CSC:LB7 (TMB)"
Should I have just upgraded without unrooting? Why is it telling me this? I thought this was the stock ROM? If I keep flashing me Blaze with different ROMs without completely reformatting, will that slow it down?
Click to expand...
Click to collapse
use the file from here http://forum.xda-developers.com/showthread.php?p=32313738
i used this and it worked
woodzx67 said:
use the file from here http://forum.xda-developers.com/showthread.php?p=32313738
i used this and it worked
Click to expand...
Click to collapse
I used this and now Kies is timing out trying to upgrade to ICS when it gets to the 100% downloading firmware part. Apparently reading the thread this tar isn't good for upgrading to ICS. But you did somehow?
Yup it took me a couple tries but it worked
Sent from my SGH-T769 using xda premium
WhaleWithWings said:
I used this and now Kies is timing out trying to upgrade to ICS when it gets to the 100% downloading firmware part. Apparently reading the thread this tar isn't good for upgrading to ICS. But you did somehow?
Click to expand...
Click to collapse
that's a kies issue. lets face it, it sucks. but that's the only tar I've been able to find that puts it back to Samsung Official and allows you to upgrade via kies. If you dont trust the links I have, you can find the tar at sammobile.com but you'll have to register to download
WhaleWithWings said:
I used this and now Kies is timing out trying to upgrade to ICS when it gets to the 100% downloading firmware part. Apparently reading the thread this tar isn't good for upgrading to ICS. But you did somehow?
Click to expand...
Click to collapse
The tar from http://forum.xda-developers.com/showthread.php?t=1917570
[FIX] "Your device does not support software upgrading via kies" is fine and 100% working. I can personally confirm this ;]
Sent from my SAMSUNG-SGH-T769 using xda premium
I never understood why people choose to use Kies... I personally hate it. It is much faster and easier to do it the XDA way and root/CWM and then flash whatever rom you want. If you want I'll post the quicker way to do this. No one has hard bricked from this method and its quite simple.
Root your device (you already have I see)
Install CWM HERE. (make sure not to check re-partition)
Boot into CWM by holding Volume UP and Volume DOWN and pressing POWER. USB must be unplugged. (could take up to 20 seconds to load CWM)
Flash your new ICS modem HERE in CWM
Now you can install any ROM you wish. You can install the stock ICS rom or a modified ROM. It is best to always have CWM just in case something messes up you have options to fix. If you install through Kies you have to install CWM over again anyways. This is faster. Now to install a ROM, there is a common process that will help out....
To install a ROM:
Boot into CWM
Perform a factory/reset
Wipe cache
Wipe Dalvik cache (under advanced)
Install zip (ROM)
Reboot and let your phone sit for at least 5 minutes, 10 is preferred.
Newbie Guide for Modding
You can read the above link for a small rundown on CWM and its available options. If you are here on XDA you probably should have CWM.
I had unrooted my device before installing CWM and didn't see the part that says to root it before hand. I installed it, seems to work fine. Will I have any problems.
Also, I just learned you're instructions are missing a step, I have flash the actual ICS ROM here:
http://forum.xda-developers.com/showthread.php?t=1918608
Before the radio mod you listed. Other than that, thanks!
P.S. What do you mean by "modem"?

[Q] Whats the best way to...

Ok so Ive decided to head back to stock. While all this is flashing and what not is fun and maybe invigorating to some, its gotten me worried that my phone is going to explode in my hand or something. I just dont want to cause any problems with my new shiny phone. Can you tell my noob-ness level? lol So Im running CR 2.5 and LiquidSmooth before that. While there is nothing wrong with CR im just too nervous every time I see something unusual.
I have a nandroid BU of Stock with root and unlocked BL and CWM flashed. If I format system, Format data, Format cache and restore that nandroid. Im back to stock ROM and everything with root, correct?
If I choose to unroot, do I have to use ODIN, or is there another way? I pretty much want to go back to getting OTAs but dont want to loose all my Apps. Can I stay rooted, then lock the bootloader and accept OTAs?
Now I also have BUs in TB and MYBackup. If I choose to unroot how do I get my backups restored if Im not rooted?
What are my best options? Suggestions, links are greatly appreciated?
Anybody?
Sent from my SCH-I535 using xda app-developers app
travis.bridges10 said:
Anybody?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes me! So first of all there are the OTA's in the development section I believe. And you can just flash the OTA to your rooted device description is in the forum. Second If you would want to get back to stock non rooted the best way would be to ODIN also don't forget to reset the flash counter if you needed to return the device to verizon or anything.
Also you can find the latest stock rooted in the development section with all OTA's included. I wouldn't un-root if I were you just because of all the good stuff that is possible with root.
And I just want to tell you that your pretty safe your phone won't explode or anything like that. :laugh: just make sure you follow the instruction correctly and your phone shouldn't over-heat or drain the battery so on. And even if something drain's the battery check the section where you downloaded the ROM from and you will find the solution easy as 1-2-3.
Use the little search button upper corner on the right hand side if you have any questions in the verizon GS3 section of course and you will find everything you need.
If I have a little time later today, I will link you the OTA's and the latest stock-rooted ROM if you can't find it.

[Q] Updating to Jelly Bean w/ TWRP

Every time I try to do the over the air update from ICS to JB on my AT&T Skyrocket when the phone restarts I get stuck at the TWRP bootloader (from when I rooted it). When I tell it to restart and the phone boots it tells me the update was unsuccessful. What am I doing wrong? More importantly, will I have to restore the original bootloader to update? If that's the case where can I find it? Will I have to backup everything and then just restore it to factory defaults?
If you're updating stock roms over the air, you have to be on stock, unrooted, with the stock recovery. However, that being said, there is no official JB rom for the skyrocket either through ota or through Kies. It's likely that it is reading that there is a minor update for ICS available. If you really want it, there is a thread for it somewhere around here. I believe that there may even be a flashable zip there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
bps119 said:
If you're updating stock roms over the air, you have to be on stock, unrooted, with the stock recovery. However, that being said, there is no official JB rom for the skyrocket either through ota or through Kies. It's likely that it is reading that there is a minor update for ICS available. If you really want it, there is a thread for it somewhere around here. I believe that there may even be a flashable zip there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
That's what I was afraid of. I can't find the original, and to be honest I forgot how to do it it's been so long since I've messed with it. On the other hand, if it's not JB then I'm not too worried about it and will let it ride until it is available. For my edification, do you know where I could find the proper stock recovery?
Check out the stickies. A member by the username of Vincom has a few with some really good info contained within them. In one of them, there is a link for Samsungs downloads page where you can find all the stock Odin flashable tars. Those will bring you back to 100% stock with recovery.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

If you want to update, but you're rooted/custom recovery/custom kernel...

...and you DON'T want to perform a Factory Reset.
Figured this out while returning to the stock kernel after poor performance on a custom one...
THIS WILL LIKELY NOT WORK IF YOU ARE ON A CUSTOM ROM
If you are still on the Stock ROM you can do this to get new updates from your carrier (I have only tried AT&T):
1. Unfreeze AT&T updater (if you have it frozen)
2. Use ODIN to return to stock WITHOUT performing a factory reset. AdamOutler has a thread HERE with the stock firmware download in the Android Development section
3. Boot up and check for updates
4. After you have updated, root it, apply your custom recovery, and/or kernel again
5. Hit the THANKS button below
All your apps and settings will remain. You may have to re-sign-in to some, but you should be good to go.
joeybear23 said:
Figured this out while returning to the stock kernel after poor performance on a custom one...
THIS WILL LIKELY NOT WORK IF YOU ARE ON A CUSTOM ROM
If you are still on the Stock ROM you can do this to get new updates from your carrier (I have only tried AT&T):
1. Unfreeze AT&T updater (if you have it frozen)
2. Use ODIN to return to stock WITHOUT performing a factory reset. AdamOutler has a thread with the stock firmware download in the Android Development section
3. Boot up and check for updates
4. After you have updated, root it, apply your custom recovery, and/or kernel again
5. Hit the THANKS button below
All your apps and settings will remain. You may have to re-sign-in to some, but you should be good to go.
Click to expand...
Click to collapse
Where can you find out when carrier updates are released?
This will always work no matter what Rom your on...even if your on aosp...Odin is created so that you can return to stock. Once your on stock you can receive any update available...
Sent from my HTC PH39100 using Tapatalk 2
mg2195 said:
This will always work no matter what Rom your on...even if your on aosp...Odin is created so that you can return to stock. Once your on stock you can receive any update available...
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Yes, however if you are on a custom ROM you must perform a factory reset prior to or after ODIN, which will make you lose your apps, settings, etc.
If you are still on the stock ROM, you don't have to factory reset... which is kind of the point for people who want the update but don't want to factory reset.
blyndfyre said:
Where can you find out when carrier updates are released?
Click to expand...
Click to collapse
Just follow the forum. When an update is released, I guarantee you there will be no less than 50 new threads in here.
joeybear23 said:
Just follow the forum. When an update is released, I guarantee you there will be no less than 50 new threads in here.
Click to expand...
Click to collapse
Assumed as much, but wanted to be sure. I'm on this forum exclusively and hourly anyways lol. So much reading to be done!
Will updates be specific to carrier? For instance I'm on Telus in Canada so I'll need to wait for my specific update, download and flash via ODIN? (Since I'm 'custom' status and won't be able to OTA. Root only, stock recovery, kernel and ROM.)
And thanks btw!
blyndfyre said:
Assumed as much, but wanted to be sure. I'm on this forum exclusively and hourly anyways lol. So much reading to be done!
Will updates be specific to carrier? For instance I'm on Telus in Canada so I'll need to wait for my specific update, download and flash via ODIN? (Since I'm 'custom' status and won't be able to OTA. Root only, stock recovery, kernel and ROM.)
And thanks btw!
Click to expand...
Click to collapse
Unfortunately I can't speak for anything other than AT&T since I don't have the ability to test any other carrier's devices... however the update will likely be pushed by your carrier with their proprietary update mechanism.
If you want to use something other than OTA, you can wait for a flashable zip when it comes available, which will likely be pretty quick after initial release.
joeybear23 said:
Unfortunately I can't speak for anything other than AT&T since I don't have the ability to test any other carrier's devices... however the update will likely be pushed by your carrier with their proprietary update mechanism.
If you want to use something other than OTA, you can wait for a flashable zip when it comes available, which will likely be pretty quick after initial release.
Click to expand...
Click to collapse
Thanks man. One last question, would this flashable zip flash via ODIN or Custom Recovery (TWRP/CWM) or either method?
blyndfyre said:
Thanks man. One last question, would this flashable zip flash via ODIN or Custom Recovery (TWRP/CWM) or either method?
Click to expand...
Click to collapse
Depends on the Developer... most likely a flashable zip for TWRP/CWM
joeybear23 said:
Depends on the Developer... most likely a flashable zip for TWRP/CWM
Click to expand...
Click to collapse
Maybe a tad off topic, but if one were to follow the directions in the OP, wouldn't it still not work? You'd still have the custom unlock button with stock firmware, which would prevent it to look for any OTA update.
Maybe I'm wrong?
MattMJB0188 said:
Maybe a tad off topic, but if one were to follow the directions in the OP, wouldn't it still not work? You'd still have the custom unlock button with stock firmware, which would prevent it to look for any OTA update.
Maybe I'm wrong?
Click to expand...
Click to collapse
I thought the same thing, until I tried it and the OTA came over just fine. That's one of the reason I started this thread, so others would know they can do it.
The ODIN gives you back the stock recovery so you can pull the OTA.
joeybear23 said:
I thought the same thing, until I tried it and the OTA came over just fine. That's one of the reason I started this thread, so others would know they can do it.
The ODIN gives you back the stock recovery so you can pull the OTA.
Click to expand...
Click to collapse
Do you know if doing so removes the custom unlock icon?
If I'm running custom rom s and kernels would the att update even be beneficial?
MattMJB0188 said:
Do you know if doing so removes the custom unlock icon?
Click to expand...
Click to collapse
It will not.
Sent from my SAMSUNG-SGH-I337 using xda premium
Bigtjmc said:
If I'm running custom rom s and kernels would the att update even be beneficial?
Click to expand...
Click to collapse
ROMs? No
Kernels only? Yes imho
Sent from my SAMSUNG-SGH-I337 using xda premium
joeybear23 said:
It will not.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Ok, how about if one follows your method and then updates via AT&T OTA. Would it then get rid of the custom unlock status? How does one remove this if they're not rooted with 100% stock? I don't get why it still shows it.
MattMJB0188 said:
Ok, how about if one follows your method and then updates via AT&T OTA. Would it then get rid of the custom unlock status? How does one remove this if they're not rooted with 100% stock? I don't get why it still shows it.
Click to expand...
Click to collapse
I am not 100% certain what all gets looked at when the firmware runs its "custom status" check. I do know that there are a wide variety of fixes/solutions that work for some and not for others... I have the custom icon, but it doesn't bother me, so I haven't done too much research into it.
joeybear23 said:
I am not 100% certain what all gets looked at when the firmware runs its "custom status" check. I do know that there are a wide variety of fixes/solutions that work for some and not for others... I have the custom icon, but it doesn't bother me, so I haven't done too much research into it.
Click to expand...
Click to collapse
+1
Doesn't bother me one bit, although my bootloader is unlocked so I don't get the unlock icon boot screen.
Maybe a stupid question, but could one flash SGH-I337 UCUAMDL firmware instead since its the latest, or would it better to flash the original firmware then update?
MattMJB0188 said:
Maybe a stupid question, but could one flash SGH-I337 UCUAMDL firmware instead since its the latest, or would it better to flash the original firmware then update?
Click to expand...
Click to collapse
Not a stupid question at all. Yes you can do that. When I started this thread there was not one available.
Sent from my SAMSUNG-SGH-I337 using xda premium

Categories

Resources