Related
Yes, everyone knows by now
ICS for Rogers Skyrocket is available through Kies as an Update as of this morning!!!
Also ROOT works too!!!
Sorry guys for my writing style, hope this is the right place to post it.
Just wanted to pass some news and tips so you know 100% what works and what doesn't.
-----------------------------------------------------------------------
ROM UPDATE
-----------------------------------------------------------------------
Make sure your Kies is up to date and you have all Samsung Drivers correctly installed. If you update drivers and/or Kies software REBOOT YOUR COMPUTER.
It did not work for me when I was on another ISC leak ROM (ICS->ICS no no, GB->ICS yes! makes sense)
So went back and first flashed Rogers Radio/Modem (Radio_I727RUXKJ7.zip) and then ODIN Stock ROM (SGH-I727R-UCKJ2-k0nane.tar)
Thanks k0nane!
After doing that, Update through Kies went with no issues.
(it takes about 15 min so make sure your battery is fully charged and depending on your Internet connection it may be longer or faster)
Some screensots from Kies are attached below.
Pay attention to the messages, especially for the last NOTICE after update shows 100%.
The phone WILL REBOOT ON ITS OWN AFTER COUPLE MINUTES.
DO NOT PULL THE CABLE OUT!!!
-----------------------------------------------------------------------
ROOT
-----------------------------------------------------------------------
It works.
Just follow instructions from starskyrob in THIS Guide
Thanks starskyrob!
It actually ONLY works with this version (Superuser-3.0.7-efghi-signed.zip)
I know that because, of course I got too lazy and used SGSII Toolkit to do dirty work but it only ODINed proper CWM for me and then superuser.zip it tries to flash is 3.0.5 so this version does not work.
Just use Superuser-3.0.7-efghi-signed.zip and everything will be fine.
Hope it helps some of you.
We waited waaaaay too long for this!!!
Except you tripped your flash counter if you used k0nane's "stock" tar. You're better off using the stock tar from the Sammobile website. I can confirm first hand that k0nane's trips the counter, the stock tar from Sammobile does NOT.
pixelens said:
Except you tripped your flash counter if you used k0nane's "stock" tar. You're better off using the stock tar from the Sammobile website. I can confirm first hand that k0nane's trips the counter, the stock tar from Sammobile does NOT.
Click to expand...
Click to collapse
Correct sir! K0nane's trip counter every single time... Always use the sammobile tar. Just register and look for your device in my case "i727" downloading official tar does not trip counter, I really don't know why K0nane has not updated it yet.
Sent from my SAMSUNG-SGH-I727 using xda premium
r3dp0is0n2012 said:
Correct sir! K0nane's trip counter every single time... Always use the sammobile tar. Just register and look for your device in my case "i727" downloading official tar does not trip counter, I really don't know why K0nane has not updated it yet.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks guys, I had no idea the one from Samobile is better. Must check that out next time.
Honestly, it does not even matter to me because there is counter reset zip so it clears that easily and if phone ever breaks it will justify getting S3 LOL
wating for the ATT version
wilczy said:
Thanks guys, I had no idea the one from Samobile is better. Must check that out next time.
Honestly, it does not even matter to me because there is counter reset zip so it clears that easily and if phone ever breaks it will justify getting S3 LOL
Click to expand...
Click to collapse
Yeah, not as huge a deal now - but when I was doing it there was no counter reset.
As well, the two files are different in size, I can't recall which is larger though so something's not jiving.
not going to the stock official, going to wait for some devs to cook up some nice roms and kernels and flash the new stuff via CWM.
hope 4.0.4 stock is working well for all though. Good to see it is finally here with the new modem file !
What would happen if an att i727 is flashed with an odin tar of rogers ICS ? I heard that modem works fine on att i727
mahanddeem said:
What would happen if an att i727 is flashed with an odin tar of rogers ICS ? I heard that modem works fine on att i727
Click to expand...
Click to collapse
Proven to soft brick at the least
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
unibombz said:
not going to the stock official, going to wait for some devs to cook up some nice roms and kernels and flash the new stuff via CWM.
hope 4.0.4 stock is working well for all though. Good to see it is finally here with the new modem file !
Click to expand...
Click to collapse
i did flash rogers ics, too boring so went back to skyics to wait for new rom development
is nfc enabled/working on this?
Sent from my SAMSUNG-SGH-I727 using xda premium
waiters said:
is nfc enabled/working on this?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Yes it is, but I have no way to check if it works.
There is few more NFC apps in the system folder comparing to other roms.
pixelens said:
Except you tripped your flash counter if you used k0nane's "stock" tar. You're better off using the stock tar from the Sammobile website. I can confirm first hand that k0nane's trips the counter, the stock tar from Sammobile does NOT.
Click to expand...
Click to collapse
you know you can reset counter. i totally forgot that u have to wipe data and cache and i odined my tar 5 times use the reset cwm zip and bam offical and zero count again
heere is the thread
http://forum.xda-developers.com/showthread.php?t=1575712
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
boring rom tho nothing exciting back to cm9 or skyics
intenseone said:
you know you can reset counter. i totally forgot that u have to wipe data and cache and i odined my tar 5 times use the reset cwm zip and bam offical and zero count again
heere is the thread
http://forum.xda-developers.com/showthread.php?t=1575712
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
boring rom tho nothing exciting back to cm9 or skyics
Click to expand...
Click to collapse
As mentioned previously, yes you can reset the counter. As also mentioned, I noticed there's a size difference between the two so added to the fact that k0nane's "stock" tar trips the counter and is a different size than the Sammobile one, I'd be inclined to use the Sammobile one. Also, why add extra steps like having to clear the flash counter? Might be worthwhile adding a note about that in the OP for those that don't read the whole thread and are unaware of the flash counter tripping situation.
WiFi problems after rooting official Rogers ICS 4.0.4
Hey everyone,
I just updated from stock Rogers GB to the official ICS - no problems there; however right after I rooted it using the file/method suggested above (again, without any issues), I started having issues with WiFi - it seems to be random but say, about 4/5 times, the WiFi would fail to connect after the phone gets restarted - although the WiFi service is running (the WiFi button is green). Sometimes there is also a system flash showing the message "?WiFi available" with a question mark before the message. If I manually stop/restart the WiFi, it eventually recognizes the hotspot and it connects. I have the Superuser & Busybox Pro PROPERLY installed, furthermore, no other program that requires root permissions seems to be having any problems whatsoever (Titanium Backup, Rom Manager, Superuser, Tasker, CallRecorder, etc).
Although I didn't spent much time playing around BEFORE applying the root, it seems obvious to me that this only occurs after rooting - personally I suspect that ICS 4.0.4 doesn't go along very well with this rooting method (mismatching binaries). I am also aware about a known bug in ICS 4.0.4, causing the WiFi to frequently drop - could it be one and the same?
FYI: I tried installing/reinstalling ICS several times: initially I have updated through Kies, than I flashed the ROM from Sammobile through Odin, and then another couple of time I just reformatted the system in CWM and reinstalled everything again.. At first I used some backups from TB (no system files, only 3rd party), but then, suspecting that backups made in GB might conflict with ICS structure, I didn't use any backups at all - just fresh installations - no difference, same problem.
UPDATE: I have flashed & done some tests with SKY-ICS by seanzscreams. Unfortunately, since it's based on the same Rogers' ROM, it comes with the same problem. I guess this only confirms my observation.
Anybody else having this issue?
Super user 3.0.7 does not flash in recovery, gives an error
It works with this Recovery
http://forum.xda-developers.com/showthread.php?t=1566613
odeccacccp said:
Super user 3.0.7 does not flash in recovery, gives an error
It works with this Recovery
http://forum.xda-developers.com/showthread.php?t=1566613
Click to expand...
Click to collapse
Well, actually it DOES work while YES, it does give an error - all you have to do is ignore the error and keep trying; the 3rd or the 4th attempt shall be successful and it'll confirm the process successfully completed.
HOWEVER
Super User 3.0.7 and CWM are two completely different things. The Super User 3.0.7 combined with the binaries (as it comes zipped) is intended to root the phone, while the CWM is a set of tools - having nothing to do with rooting.
My concern is that even the developer of the package Super User 3.0.7.zip admits that the binaries were intended for all Android versions up to 4.0.3 - while, like many others, I was hoping to also work with 4.0.4 - which it does...but it doesn't.
A direct reference can be found here.
Has anyone heard whether or not Chainfire, as come up with a non Odin one click, with CWM Touch & root?
I get the feeling that can do all this in his sleep!
Sent from, The Eclectic Chair.
Ok, I've got a couple of probably very dumb questions. So sorry!
I updated my phone to the rogers ICS using kies. Everything is great, but I no longer have Root.
In reading Copperheads instructions this is what I don't get.
I already have
The the superuser zip on my external sd card, as well as Rom Manager, CWM Recovery and titanium etc. They're all present in my app drawer & as short cuts on the phone. What is missing is the root access, why is the message I get when trying to open any of them Is there no way to flash what's already on my phone? Or do I basically have to start from scratch with Odin So I apologize again for the question, it's just hard for me to figure out why, if everything is actually on the phone now?
Sent from, The Eclectic Chair.
quick question
Okay so quick question,
If it's better to use the stock odin tar from sammobile to flash back to stock.
Would it be better to flash the I727RUXLF3(ICS) from sammobile right away or go back to stock gingerbread and upgrade through kies.
First of all I apologize if this has been brought up before in other posts. I am in a mixture of frustration and panic right now because I tried upgrading to ICS on my Rogers SGS2 LTE, and it failed.
Using Kies, I followed the prompts, and for whatever reason it didn't finish. Now when I boot up the phone, it keeps telling me to use the recovery mode option in Kies. However, if I do try to use recovery mode, it always times out and tells me I may need to contact a Samsung service center. The computer has no problem communicating with the phone, AFAIK.
Basically, I'm here to ask what options I have. Currently, i'm trying to do this: http://forum.xda-developers.com/showthread.php?t=1342348 , but because the stock TAR is taking a long time to download, I'm asking if I have any other options. I would like to keep the data on my phone, but if I have to wipe it to return it to normal I'm willing to do that.
Please help.
Reboot and try again
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium
I've tried rebooting the computer I was using, and I've also tried another computer with no luck. I got the latest Kies on the other computer, connected the phone with no problem, and tried recovery mode on THAT 2nd computer, but it didn't work because it didn't recognize my recovery code that the first computer gave me.
garydv2002 said:
Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I *think* I was rooted. I remember doing something a long time ago involving odin. I never installed Cyanogenmod or any other 3rd party roms.
I had Superuser under my apps, if that helps.
I wish I could reply sooner but this board is making me wait 5 mins between posts. Sorry. It's like I'm in the emergency room with a gunshot wound and I'm waiting for the doctor to finish his smoke break, then his coffee break, then washroom break, jesus
by CWM, I think you're asking about Clockwordmod? If so, yes, I had that on my phone. Does this mean I can't use the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1342348 to fix my phone now? Or can I still proceed.
If you have superuser then most likely you are rooted and since you have clockworkmod especially then kies is not gonna update your phone. Your on Rodgers so you need to find the stock firmware and flash it. I'm on att or I could link you to one that would work. I got my stock firmware from Samsung website. Try going to sammobile and see if you can find the stock firmware for your phone. I'm sure since its Samsung they should have Rodgers firmware to. Download the stock firmware and flash it in Odin onto to your phone and then kies should work. If you can't find the stock firmware at sammobile then look for the stock firmware here on xda I'm sure someone on Rodgers has it....
Edit. The link up there to Odin back to stock should work. Just download the file and follow the steps in order and don't leave one out. There are no shortcuts when it comes to flashing a phone or it could be rendered useless for anything more than a paperweight. Konane is real good and would not lead anyone wrong....
Sent from my SAMSUNG-SGH-I727 using xda premium
Just flashed it via Kies, had to use ODIN by flashing stock, Odin wouldn't work till I rebooted my computer, then once Kies updated, I had had a error ( com.Android.phone stopped) but I cleared data and cache in 3e, then everything worked.
Sent from my SGH-I727R using xda premium
I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.
bobbastard said:
I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.
Click to expand...
Click to collapse
If you're back to stock and on Rogers, you should be able to update using Kies.
The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.
bobbastard said:
The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.
Click to expand...
Click to collapse
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium
denenatse said:
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium
Click to expand...
Click to collapse
I haven't used the stock 3e that much always just flash cwm but I would suggest that you do a factory data reset to from the recovery if 3e gives that option I've never used it so I'm not sure. But if you are still on cwm recovery kies will not ever update your phone until you put everything back stock. You must have just flashed the kernel only. Flashing just the kernel does not wipe anything you need to flash the stock firmware from sammobile in Odin and that will do a full wipe and restore everything to stock
Sent from my SAMSUNG-SGH-I727 using xda premium
Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.
bobbastard said:
Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.
Click to expand...
Click to collapse
Turn the phone off. Hold both volume up and volume down and hold the power button do not release the volume buttons yet. Pressing all 3 buttons when you first see the screen come on mine shows an att logo then release the power button only. The phone will then boot into either 3e stock recovery or cwm recovery
Sent from my SAMSUNG-SGH-I727 using xda premium
OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?
bobbastard said:
OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?
Click to expand...
Click to collapse
Yes. And if you don't it might not wipe everything. I suggest you do it before you flash it and again after...
Sent from my SAMSUNG-SGH-I727 using xda premium
read this to return to stock http://forum.xda-developers.com/showthread.php?t=1652398
this post is just a copy paste from another post i wrote to a n00b
read, read more, read the stickies, i read alot b4 i even attempted to flash, at least a few hundred posts and using the search button.
all problems and solutions have been posted, as u r a n00b all u have todo is invest time into reading alot of posts, because of ur post we all know u havent even bothered to read the stickies, espicially read the one w/n00b's in the title, thats y they r there. .
once u know what ur r doing and r stumped at a certain problem, believe me we can tell by how u post a question, post in the q&a forum
Im trying to figure all this out and do it safely. I guess I bricked my 1st phone blue light only no power? I'm hoping to NOT do it again :good: ... Not very easy to get help around these forums since most ppl think you should already know. Im on ff18 and root per Qbkings vid, agat 0.2.1. Im timid on flashing now due to the brick. I have flshed about 10 roms when i was on el29 and never had any problems until i tried to flash an ICS rom.
So if im on ff18 root agat can I just use the format all and flash safely. And also how do you know when your going between roms that you are doing it safe? I want to try a few out?
Gtalk or emial [email protected] for any help offered.
Thank you in advance
Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium
gilbydakid said:
Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever
I used this
http://forum.xda-developers.com/showthread.php?t=1525495
jpeclf said:
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever
Click to expand...
Click to collapse
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium
Odin v1.81 will not see phone in download mode
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
gilbydakid said:
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
Click to expand...
Click to collapse
http://hotfile.com/dl/145140482/1e58...Stock.zip.html el29 file
http://forums.acsyndicate.net/showthread.php? 2685-Odin-1-85-download-for-the-Epic-Touch-4G odin 1.85
http://www.youtube.com/watch? v=_vmEmheJnyg
Btw download mode is power and volume DOWN then once your there you press the up button you get into download mode before plugging in.
If odin doesnt recognize phone with yellow com ..try a different cable
hope it helps
Sent from my SPH-D710 using Tapatalk 2
doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan[/QUOTE
Glad you got it fixed ... when you roll back you will probably start getting an OTA update that will annoy the S--T out of you as it did me! Use this method it easy and make sure to hit thanks for him ...this was a life saver!!!! http://forum.xda-developers.com/showthread.php?t=
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
treyserits said:
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
Click to expand...
Click to collapse
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
thanks
qkster said:
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
Click to expand...
Click to collapse
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
treyserits said:
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
Click to expand...
Click to collapse
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Kies?
psal217050 said:
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Click to expand...
Click to collapse
Would it be best to use kies to update to GB? I'm a little concerned as to what would happen to my Infuse all around.. What will need backed up?
I have titanium backup but if the app gets wiped wont i lose all my back-ups? For some reason it wont sync to my dropbox app force closes every time I try. Sorry about all the questions I'm just short on the amount of time I am able to browse threads at the moment but I do have use of a computer for awhile so that kinda helps.
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Ok well here goes nothing.
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Well I'm going to install and give it a try with Heimdall. I'll let you know how it goes. Thanks everyone for all your help. I'm sure I'll have more questions before long. XD
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
treyserits said:
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
Click to expand...
Click to collapse
It doesn't matter if your phone is unregistered and locked. You cannot use SuperOneClick on Gingerbread. What you should do is (this is the Heimdall version):
Flash this rooted version of stock GB:
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
You do that and you already have root.
If you want to then graduate on to Jelly Bean you must:
Flash ICS (follow directions carefully!):
http://forum.xda-developers.com/showpost.php?p=24901014&postcount=1
Once you've done that, flash any of the JB ROMs you like, but make sure to read the directions carefully. I strongly recommend that you consult the Super Everything Thread for links to the ROMs and tweaks you need, particularly if you are interested in unlocking your phone.
http://forum.xda-developers.com/showthread.php?t=1610374
I'm feeling kinda stupid..
Can somebody give me the right link for downloading Heimdall One-click w/root? For some reason I'm not able to get any to work on this computer.. I downloaded the ink provided labeled UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL on
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
but am unsure if that actually is the one containing Heimdall or just the rom i'm flashing or both.. I'm extremely sorry about my noobishness of just posting all these already answered questions. I've gone and confused myself and have like ten tabs with different threads open please don't hate me. I have a bad habit of asking questions..
Oh and what apps do i need on my phone in order to flash? And I mean absolutely need. I've also noticed that most threads say to format my mounted sd card But i really dont want to do that if i dont need to.
It should all be bundled together. Heimdall is a java based interface so it should just open up. Sorry, it's been a long time and I'm an Odin person!
You don't need any apps on your phone. When you flash, everything on the small partition will be wiped (apps, app data, etc). Flashing will not usually wipe your pictures, videos etc. but it's always a good idea to back up. For now, don't worry about formatting anything. When you get to ICS, you'll need to format as it says in the instructions. Otherwise, if it works, don't fix it!
When you flash ICS and JB, all you need to do is to put the zip files on to your internal SD card (not the one you can take out). You can then flash from CWM (which will already be on your phone - don't download Rom Manager).
Once again thank you all. I'm running GB and loving it. My fiance is shocked at how much help I needed though usually I'm the person everyone comes to with their tech issues LOL. But I absolutely did not want to mess my infuse up. I thought I did but the issue was such a noob mistake that I had to smack myself in the face at my stupidity. Forgot to unzip the cwm ect folder I downloaded. XD not sure I'm ready to try ICS or JB yet though.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
The odd thing is you could have updated to GB through AT&T and used mini kies. But at least you are now rooted and able to go to ICS and JB.
Read the instructions on the next step before moving on.
Sent from my SGH-I997 using xda premium
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
treyserits said:
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
Click to expand...
Click to collapse
Which ROM did you flash and which CWM recovery can you see (which version)?
I used the http://forum.xda-developers.com/show...43&postcount=2 thread to get the rooted rom UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL.
Saved I think.
So I finally Got it to connect to my comp and re-flashed the rom can i get a link to an ICS heimdall one click package to flash before restoring anything and this happening again?
You should be able to find it on the ISET page.
http://forum.xda-developers.com/showthread.php?p=32876425
Sent from my SGH-I997 using xda premium
Over the past month or so I have tried several times to update my S3 with the Jelly Bean update from Verizon. Each time I try it I get a message that the software failed to install.
O I need to unroot the phone and lock the bootloader in order to update? Anyone else had this problem? Right now I am on Android version 4.0.4 and I think the update is 4.1.2.
I believe for the official update you have to be unrooted and have a locked bootloader unless you do it from kies where it can revert it complete to stock and unroot it.
Sent from my SCH-I535 using xda app-developers app
djteotancolis said:
I believe for the official update you have to be unrooted and have a locked bootloader unless you do it from kies where it can revert it complete to stock and unroot it.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You are 100% correct. Update will fail due to custom recovery. OP, why not download one of the many JB ROMS from the development section and flash it? Not only will it update your phone, it will be much better than stock as well as easier to install.
HHF2 said:
You are 100% correct. Update will fail due to custom recovery. OP, why not download one of the many JB ROMS from the development section and flash it? Not only will it update your phone, it will be much better than stock as well as easier to install.
Click to expand...
Click to collapse
I have not yet ventured into flashing other ROMS but am certainly willing to give it a try. I know there are many available but can you suggest one or two that i can try.
Really tough to suggest a ROM, there are a lot of different options depending on what you are looking for. Clean ROM is pretty much stock that has been optimized, I would probably start there since you have only done stock. You can then make a nandroid and flash other ROMS and see which one you like the best.
Just remember, read all of the stickies so that you have everything backed up in case something goes wrong. It takes less time to read and learn it before you have a problem and then don't have what you need to fix it nor the know-how.
Okay, so I download a ROM zip file. I copy it to me microSD card. I have TWRP on my phone. I assume I just go into recovery mode, wipe the cache and Dalvik cache and then just install the zip via TWRP. Is that all I need to do?
Never mind. I just flashed the Jelly_Beans10 ROM and it works fine.