I have a MyPhone A888 Duo with mizwa rom v2. Now problem is that i done a factory reset and than it goes to CWM recovery and asked Rom may flash recovery stock recovery on on i press Yes than my phone is robot since phone start recovery mode screen shows and than factory reset animation show and again phone restart now my phone stuck into this loop and i am not able to start phone normally and unable to enter recovery mode please help help help (Sorry for my English)
mujahidislam said:
I have a MyPhone A888 Duo with mizwa rom v2. Now problem is that i done a factory reset and than it goes to CWM recovery and asked Rom may flash recovery stock recovery on on i press Yes than my phone is robot since phone start recovery mode screen shows and than factory reset animation show and again phone restart now my phone stuck into this loop and i am not able to start phone normally and unable to enter recovery mode please help help help (Sorry for my English)
Click to expand...
Click to collapse
Flash your phone with stock rom
flash it with your device's flashing tool
Any problem you can reply
I am always there to help you
Hit THANKS if I helped you
MyPhone A888 Dyo
pandian8552 said:
Flash your phone with stock rom
flash it with your device's flashing tool
Any problem you can reply
I am always there to help you
Hit THANKS if I helped you
Click to expand...
Click to collapse
Thanks i followed your instructions and wow problem solved thanks man!
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
While powering on press the Vol Up + Vol Down + Power Button
Then scroll down to Fastboot Protocol ( Scroll with vol keys)
Then Press the lock button once and then vol up key
Then At First There will be Bootloader then just once press lock key and you are in. :good: :fingers-crossed:
help
Plz specify,I need detailed steps,
arunbiju969 said:
Plz specify,I need detailed steps,
Click to expand...
Click to collapse
What you wanna do basically??
danielsmith177 said:
What you wanna do basically??
Click to expand...
Click to collapse
It does not work with me
Xolo play tab 7.0 stock recovery.img needed!
Hey man!
I flashed a wrong cwm recovery and my recovery has been lost. I screwed up my tab as well and now its just stuck on XOLO boot loop and not booting in.
So the only thing I can do now is I have fastboot. No recovery and no boot.
I need your help!
Can you get the recovery.img of Xolo play tab 7.0 through flashify app or any other application in play store and send me the file 'recovery.img' to my mail?
So I can flash the recovery.img through fastboot and hopefully get the stock recovery back and from there I can flash the original stock ROM of this device and probably get my tablet back online.
Could you help please? Waiting for your reply.
Hey shrihari,
I need to install cwm recovery, pls let me know if you have right version of it as ROM manager says your device(play tab 7.0) is not in the list. Also let me know if I can backup my stock recovery? So that I can give it to you.
Regards
Raghav
There is no custom recovery for our tab i tried to complie one but failed..;[
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
XDA Visitor said:
Hi,
I have rooted my device using framaroot and the using Mobile uncle too in updated the Recovery to Carliv and installed Mt657xRepartition_EN and changed partition to 3 GB. and when I tired booting into recovery mode its stuck at boot logo and not going into recovery. I see three option when i press volup + power.
recovery, fastboot and normal. When I click recovery I will get my boot logo back. When I select Fastboot nothing happens. If I select normal. its again boot logo.
I have taken NVRAM, IMEI backups. Now I am stuck as I cannot boot into recovery. Can anyone help me get thru this problem?
Click to expand...
Click to collapse
Ok ... seems that you bricked your device by repartitioning it.
Changing the partitions is always very risky.
I recommend to read this thread: [AUXUS Nuclea N2] All Things Root Thread.
Maybe you can flash back a stock firmware on fastboot.
For further questions, please register on xda and ask in the Q&A thread about your device.
Good luck !
Thread closed. Thanks you!
I have a lenovo a6000 which i have rooted recently when i tried to flash miui rom it successfully completed but it did not reboot when i press the power button it vibrates again and again in small interval.And if i tey to boot into recovery by pressing power button and volume up button it just vibrates again cant get into the recovery also can u guys help me
Thanks in advance.............................................................
Abhiraman1998 said:
I have a lenovo a6000 which i have rooted recently when i tried to flash miui rom it successfully completed but it did not reboot when i press the power button it vibrates again and again in small interval.And if i tey to boot into recovery by pressing power button and volume up button it just vibrates again cant get into the recovery also can u guys help me.
Click to expand...
Click to collapse
Do you have access to bootloader (fastboot mode)?
If no, then you have no other choice than flashing the stock ROM from a flash tool specific to your chipset.
Ask someone here for further help: http://forum.xda-developers.com/chef-central/android/lenovo-a6000-stock-rom-t3053436
cant get into the recovery or fastboot mode
Your phone is bricked.... no recovery and fastboot will end up nothing...get your phone to service centre...
Take the battery out and try to enter recovery or bootloader.hope you find sucess
Sent from my HM 1S using XDA Free mobile app
how to do this
Take the battery out and try,,,lol
my phone is detected in the pc as qualcomm HS_USB QD loader 9008
how can i unbrick it
google this:
boycracked unbrick-lenovo-a6000
good luck
Is your lenovo A6000 is still bricked? I can help you! I found a solution that really works. My A6000 won't boot or turn on or even go to recovery/bootload, it just vibrates but I managed to unbrick it.
Help to unbrick
xda_borj said:
Is your lenovo A6000 is still bricked? I can help you! I found a solution that really works. My A6000 won't boot or turn on or even go to recovery/bootload, it just vibrates but I managed to unbrick it.
Click to expand...
Click to collapse
Please sent the procedure to unbrick Lenovo 6000.
My device only vibrate cannot enter recovery or any display.
Thanks in advance sha.
Lenova said:
Please sent the procedure to unbrick Lenovo 6000.
My device only vibrate cannot enter recovery or any display.
Thanks in advance sha.
Click to expand...
Click to collapse
Visit the website given below. Use google chrome to translate the page to EN.
Code:
https://www.belajardroid.com/mengatasi-masalah-lenovo-a6000-yang-matot-tidak-ke-detek-di-pc/