Hello.
I just installed CM10 to my phone and i'm not getting any signal at all. I found out it was due to the baseband, and i want to flash a cm10 compatible baseband.
I found a tutorial on how to do it but i have a question:
If i flash the working baseband to my phone, will my rom or anything will be deleted? Or i'm going to be able to boot my phone normally and hopefully get signal?
Thanks!
U do not need to switch bb . u just need to update to bernis and wkparks boot loader.
This link is for v20p bb , but works for all.
http://forum.xda-developers.com/showthread.php?t=2093347
Sent from my LG-P920 using xda app-developers app
billy8362 said:
U do not need to switch bb . u just need to update to bernis and wkparks boot loader.
This link is for v20p bb , but works for all.
http://forum.xda-developers.com/showthread.php?t=2093347
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
If i'm not at CM10 at the moment can i just do everything on the tutorial and then just install cm10 like i would normally do?
Thanks
Yes should work.
Sent from my LG-P920 using xda app-developers app
Related
Hi all! I'm trying to update my Samsung Galaxy S (GT-I9003L). It's rooted.I get an OTA update but when I try to apply it, it says "Kernel verify fail. Update fail"
My current firmware version is 2.3.6, my baseband is I9003LUBKPD, my kernel version is is 2.6.35.7-CL765780 [email protected] #1 and my compilation number is GINGERBREAD.UBKPE
I think the problem has to do with the phone being rooted. I unrooted it using the clockwork mod recovery menu, but it didn't work either.
Is there anything I could do?
Thanks!!!
Its giving that error because u r rooted.
Rooting changes your kernel.
And even after unrooting ur device from recovery the kernel remains the same.
Sent from my GT-I9003 using xda app-developers app
crk1995 said:
Its giving that error because u r rooted.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
So, does it mean I'm out of luck?
No.
U may flash stock rom.
And later from settings u may update ur phone.
Sent from my GT-I9003 using xda app-developers app
Is there a way to just restore the recovery kernel without flashing the whole rom?
crk1995 said:
No.
U may flash stock rom.
And later from settings u may update ur phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
(I tried to find the answer before asking but I haven't been able to) Do I need to flash the full stock rom? Or is there a way to just restore the stock recovery kernel? I'm asking because when I rooted I just flashed the PDA file to the phone, but I'm still using the stock rom.
And... is there any guide or tutorial to do this?
-Removed for Personal Information-
I have one way to help.
Keep the stock fw file on sdcard and then by using mobileOdin, select kernel and choose the rom file.
And dont forget to uncheck the rooting options at bottom.
But be sure you have a backed up ur current rom.
As i m not sure if it will definitely work or not.
Sent from my GT-I9003 using xda app-developers app
just flash the entire stock firmware if you want to get OTA
Sent from my GT-I9300 using xda premium
All Done
This is repack of CM10 to work with new Wkparks bootloader it is for use with new partitions (ICS) and Wkpark bootloaders for everyone who doesnt want to downgrade to GB or has truble with it.
How to use:
1) You are on ICS
2) flash recovery
3) flash Wkparks bootloaders
Download zip and put it on sdcard, download gapps and put it on sdcard
Go to recovery wipe data, cache and system
Flash ROM and gapps.
Reboot
Bugs: CM10 bugs
And one most inportant: DO NOT ever from CM10 menu reboot to recovery.
You will be stuck in recovery bootloop.
Only way to fix that is to flash Xbsall bin.
Reboot to recovery by holding buttons.
Thanks to:
Cyanogenmod team
Ricardo Cerqueira
Wkpark
Xbsall
iBluemind
And all others on XDA!!
iodak said:
This is repack of CM10 to work with new Wkparks bootloader it is for use with new partitions (ICS) and Wkpark bootloaders for everyone who doesnt want to downgrade to GB or has truble with it.
How to use:
1) You are on ICS
2) flash recovery
3) flash Wkparks bootloaders
Download zip and put it on sdcard, download gapps and put it on sdcard
Go to recovery wipe data, cache and system
Flash ROM and gapps.
Reboot
Bugs: CM10 bugs
And one most inportant: DO NOT ever from CM10 menu reboot to recovery.
You will be stuck in recovery bootloop.
Only way to fix that is to flash Xbsall bin.
Reboot to recovery by holding buttons.
Thanks to:
Cyanogenmod team
Ricardo Cerqueira
Wkpark
Xbsall
iBluemind
And all others on XDA!!
Click to expand...
Click to collapse
Link not working for me
Sent from my LG-SU760 using xda app-developers app
Seems dev host is down.
Edit: Link is working again!
Sent from my LG-SU760 using xda app-developers app
Great work!
Finally I will test drive CM10 on my mobile, couldn't be arsed to reflash back to GB!
Do you think it's too much to ask if you could port nightlies with some periodicity, like twice a month or so?
I will update.
Sent from my LG-SU760 using xda app-developers app
iodak said:
I will update.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Ah ok so I guess I shouldn't update the nightly unless it comes from this thread?
By the way great work, loving it. Only had one little glitch when booting, funny looking twrp screen flashed up then it booted into CM10
Sent from my LG-P920 using xda app-developers app
Yes, if you use this one wait for my update. That funny looking screen at booting is known for CM10, it is the last screen that you see when you reboot. Remember not to press reboot to recovery you will brick it. Reboot normaly then use key combo to go to recovery.
And dont thank me, thank to acree hi did all the work. I only make it to work on new bootloader.
Sent from my LG-SU760 using xda app-developers app
Anyone else have issues with Wifi not turning on sometimes? Just stays at out of range (which it isn't)
Sent from my LG-P920 using xda app-developers app
I did not had that issue.
Sent from my LG-SU760 using xda app-developers app
iodak said:
I did not had that issue.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Great work iodak! But if I want return to my ROM (in this case the XBSALL V5) I can restore that from the backup or i'm gonna reflash ICS whit LG Flash Tool? Thanks for your work
Just reflash the zip and do the standard wipe process.
omgomg said:
Just reflash the zip and do the standard wipe process.
Click to expand...
Click to collapse
Works all fine!
So, this repack is only for use in phones that are alrready with ICS ported rom?
Terminator_94 said:
Great work iodak! But if I want return to my ROM (in this case the XBSALL V5) I can restore that from the backup or i'm gonna reflash ICS whit LG Flash Tool? Thanks for your work
Click to expand...
Click to collapse
Standard backup.
Sent from my LG-SU760 using xda app-developers app
dcoelho said:
So, this repack is only for use in phones that are alrready with ICS ported rom?
Click to expand...
Click to collapse
Only for ICS if you have GB use original one.
Sent from my LG-SU760 using xda app-developers app
iodak said:
Only for ICS if you have GB use original one.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
iodak i found one issue : The external sd result empty now i returned on xbsall v5 and works.
That is not issue. In CM sdcards are mounted sdcard0 sdcard1 in same folder.
Sent from my LG-SU760 using xda app-developers app
iodak said:
That is not issue. In CM sdcards are mounted sdcard0 sdcard1 in same folder.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Ah ok but where I can find the files of the external sd?
One of them is internal and other is external. Sdcard1 and sdcard2.
Sent from my LG-SU760 using xda app-developers app
iodak said:
One of them is internal and other is external. Sdcard1 and sdcard2.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Ok, but where i can find it? I find only sdcard 1 (the internal. Can u do a screen please? (sorry , too much questions )
So I just installed CM10 nightly ( jelly bean if I'm correct ) and I think something's wrong. When I try to boot it first thing that looks wierd is random colors (shouldnt be like that). After that it boots up after loading and I can use it. After using it for 2-3minutes it just turns itself off and I have to take my battery and put it back in to get it working again for 3minutes. How do I fix this, I am sure I did nothing wrong.
Edit: I installed it over CM7 nightly, I think it might be because I didn't wipe caches, but now I dont have rom manager.
http://forum.xda-developers.com/showthread.php?t=1491870
Try this thread to install recovery then wipe
Sent from my LG-P920 using xda app-developers app
capnmorgan80 said:
http://forum.xda-developers.com/showthread.php?t=1491870
Try this thread to install recovery then wipe
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I already said that I can't get on my phone for more than 3 minutes, I don't think that will help
Go back to original gingerbread, and start over againe,if you really want it ...
Sent from my LG-P920 using xda app-developers app
Sv: [Q] (Possibly) bricked optimus 3d
Are you on 21e baseband? If you are. That is your problem. Just change your baseband
Sent from my 3D phone.
lzzar said:
Are you on 21e baseband? If you are. That is your problem. Just change your baseband
Sent from my 3D phone.
Click to expand...
Click to collapse
I might sound like an idiot, but what's that?
AW: [Q] (Possibly) bricked optimus 3d
You have to read a little before you flash your phone... you need your baseband for right communication eith phone. If you want to flash baseband you need flashtool. The files you need are fls files. I consider you to go back to cm7 for now and to read few tutorials, so you have enough expierience to flash cm10. Cm10 had a lot of bugs because its the nighly version. And for most people they need to flash bernis files and wkparks bootloader to get cm10 working.
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
You have to read a little before you flash your phone... you need your baseband for right communication eith phone. If you want to flash baseband you need flashtool. The files you need are fls files. I consider you to go back to cm7 for now and to read few tutorials, so you have enough expierience to flash cm10. Cm10 had a lot of bugs because its the nighly version. And for most people they need to flash bernis files and wkparks bootloader to get cm10 working.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
How do I get back to cm7 then, that's my question
AW: [Q] (Possibly) bricked optimus 3d
Can you get in recovery? Or when you get in recovery your phone freeze?
Sent from my LG-SU760 using xda app-developers app
hey xda users, i found in the official lg updatetool an emergency recovery, can i use this to restore my phone when it is dead?
im now on defcoms light ics, can i use the emergency recovery to get back to gb or ics ?
thanks in advance
Sent from my LG-P920 using xda app-developers app
Itaka06 said:
hey xda users, i found in the official lg updatetool an emergency recovery, can i use this to restore my phone when it is dead?
im now on defcoms light ics, can i use the emergency recovery to get back to gb or ics ?
thanks in advance
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Yes, that works.
It will download and flash the latest official rom for your country and provider.
thank you very much, i will try it out tomorrow and if something gies wring i will post. thanks for answer
Sent from my LG-P920 using xda app-developers app
Hey guys after using P500 for 2+ years, i shifted to a Nexus 4
Now i want to flash stock ROM and recovery in my P500 because i plan on selling it...these guides seem too old now...
So can somebody help me??
Or provide a link for a working, updated guide
Thanx alot in advance
EDIT: After all researches finally KDZ updater worked!
People say its very risky but to be honest everytime only KDZ updater worked for me after trying other methods
Sent from my Nexus 4 using xda app-developers app
IKnowIRock! said:
Hey guys after using P500 for 2+ years, i shifted to a Nexus 4
Now i want to flash stock ROM and recovery in my P500 because i plan on selling it...these guides seem too old now...
So can somebody help me??
Or provide a link for a working, updated guide
Thanx alot in advance
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Flash Stock rom and recovery
Post here if you want the link
Sent from my LG-P500 using xda premium
Flash ICS by Hephappy, will make it sell better. Also, try flashing Pure Performance Zero to speed things
akiratoriyama said:
Flash Stock rom and recovery
Post here if you want the link
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes i need the link...its great if you can provide it plus it will turn this to full stock right??
No root and blah blah
Sent from my Nexus 4 using xda app-developers app
IKnowIRock! said:
Yes i need the link...its great if you can provide it plus it will turn this to full stock right??
No root and blah blah
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Stock ROM
http://forum.xda-developers.com/showthread.php?t=1824618
Sent from my LG-P500 using xda premium
akiratoriyama said:
Stock ROM
http://forum.xda-developers.com/showthread.php?t=1824618
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Ok thanks
I got it done using the KDZ updater
Sent from my Nexus 4 using xda app-developers app
Even i used kdz updater some days back
Just thought not to tell you about it as some said it was risky
Sent from my LG-P500 using xda premium
akiratoriyama said:
Even i used kdz updater some days back
Just thought not to tell you about it as some said it was risky
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yeah ive read about it but its the only method which works for me everytime once got it bricked though, was lucky to get back to life
This time also got a bootloop but after removing the battery and putting it back made it work
Sent from my Nexus 4 using xda app-developers app
flash oldest custom rom that you find and update after with LG Suport Tool to stock 2.2.2 , that will make your phone stock withaout custom recovery or anything else, download from LG site that tool, and 2.2 or 2.2.1 roms you can find in development, something really old
or downgrade to old bb and upgrade with same LG Suport Tool
I think is safest way
grigtm said:
flash oldest custom rom that you find and update after with LG Suport Tool to stock 2.2.2 , that will make your phone stock withaout custom recovery or anything else, download from LG site that tool, and 2.2 or 2.2.1 roms you can find in development, something really old
or downgrade to old bb and upgrade with same LG Suport Tool
I think is safest way
Click to expand...
Click to collapse
Thanx for your support! I got it done using KDZ :good:
Sent from my Nexus 4 using xda app-developers app