Here's a flashable zip of the Telus JB base
Download:
http://www.androidfilehost.com/?fid=9390288116658473259 (591MB)
Notes:
This is completely stock and odexed
Nothing has been removed No changes other than kernel flashing being 1.14 hboot-friendly.
No hboot/radio/etc. updates.
No root. For root, flash SuperSU immediately after flashing the rom.
No support will be given
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Will this update my boot?
Sent from my VENOMized HoxL
area51avenger said:
Will this update my boot?
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
boot or hboot?
The boot.img will be updated. Hboot/radio/etc. won't be touched.
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Hboot I meant. Don't want it to update to 2.14 and lose the ability for aosp roms.
Oh. Just read the op again. Missed that line completely. Sorry Turge
Sent from my VENOMized HoxL
area51avenger said:
Hboot I meant. Don't want it to update to 2.14 and lose the ability for aosp roms.
Oh. Just read the op again. Missed that line completely. Sorry Turge
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
LOL.. I added it after I responded to you.
this is a stock base rom not a ruu or ota
DvineLord said:
this is a stock base rom not a ruu or ota
Click to expand...
Click to collapse
This is based on the Telus OTA.
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Anyone installed this yet?
I tried, but get a fail at set perm part in installer.
I'm on the road, in truck no pc to help with logs or anything but thought I'd mention it just same, restore to viper didn't work, installing it over a back up does.
WR
Injected from My ViperXL
ok to install on att one x?
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
raydm said:
ok to install on att one x?
Click to expand...
Click to collapse
Should be, they're the same phone
WarRaven said:
Anyone installed this yet?
I tried, but get a fail at set perm part in installer.
I'm on the road, in truck no pc to help with logs or anything but thought I'd mention it just same, restore to viper didn't work, installing it over a back up does.
WR
Injected from My ViperXL
Click to expand...
Click to collapse
Did you try booting it anyways?
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Sorry I wasn't clear, the Telus zip on flashing stalls and then fails in twrp.
My viper daily which was backed up an then restored after attempting this failed too,
it restored but would not go beyond htc boot up screen which did change to factory screen after trying stock rom.
Reinstalling viper over the back up with its system and data worked an away I went.
When I tried the stock rom, I wiped all but sd card an I am newest radio from Telus and have Hboot 1.11.
Md5 is correct and not sure why its failing for me.
WR
Injected from My ViperXL
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
WarRaven said:
Sorry I wasn't clear, the Telus zip on flashing stalls and then fails in twrp.
My viper daily which was backed up an then restored after attempting this failed too,
it restored but would not go beyond htc boot up screen which did change to factory screen after trying stock rom.
Reinstalling viper over the back up with its system and data worked an away I went.
When I tried the stock rom, I wiped all but sd card an I am newest radio from Telus and have Hboot 1.11.
Md5 is correct and not sure why its failing for me.
WR
Injected from My ViperXL
Click to expand...
Click to collapse
I'll upload the right one tomorrow...
Sent from my HTC EVARE_UL using Tapatalk 2
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Right on Turge!
I'm off work for a spell, so I can test etc.
WR
Injected from My ViperXL
WarRaven said:
Right on Turge!
I'm off work for a spell, so I can test etc.
WR
Injected from My ViperXL
Click to expand...
Click to collapse
Link updated with fixed version.
Re: Stock Odexed Telus 3.17.661.2 Jelly Bean
Works, all good as can be expected for stock with no loving tweaks.
WR
Branded off my HOXL
nice. just install on my att one x . have to flash boot.img in fastboot before rom for it to work.
Related
Is this possible? I've seen that the update is a .exe file. I'm already rooted and unlocked.
Sent from my HTC One X using Tapatalk 2
yungskeeme said:
Is this possible? I've seen that the update is a .exe file. I'm already rooted and unlocked.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
install a recovery. I recommend twrp. To get twrp install goo manager from the play store. After that if you want the pure stock experience without the headaches it can bring install the rooted 2.20 that scrosler posted in dev. http://forum.xda-developers.com/showthread.php?t=1812459
gunnyman said:
install a recovery. I recommend twrp. To get twrp install goo manager from the play store. After that if you want the pure stock experience without the headaches it can bring install the rooted 2.20 that scrosler posted in dev. http://forum.xda-developers.com/showthread.php?t=1812459
Click to expand...
Click to collapse
So the rom comes 2.20? Wanted to keep clean Rom...so I have to choice.....any benefits to 2.20?
Sent from my HTC One X using Tapatalk 2
Nope. If you are happy with clean rom stick with it. 4.5 incorporates the changes that come with 2.20 and android 4.04.
yungskeeme said:
So the rom comes 2.20? Wanted to keep clean Rom...so I have to choice.....any benefits to 2.20?
Click to expand...
Click to collapse
Actually, this is 2.23 with AT&T bits blended in. It also has much of the bloatware removed. Scott has said there is practically no difference between 2.20 and 2.23 except the AT&T Stuff.
If you are still on 1.xx, it would recommend upgrading to 2.xx. The new ones are based on 4.0.4 and an updated Sense 4.0. It it much smoother, better multitasking and I get better battery life.
I would also suggest CleanROM 4.5 SE, since you will still have the stock experience and keep your unlocked bootloader and root.
You can do this without having to use the RUU, so it will be much easier.
nerk69 said:
Actually, this is 2.23 with AT&T bits blended in. It also has much of the bloatware removed. Scott has said there is practically no difference between 2.20 and 2.23 except the AT&T Stuff.
If you are still on 1.xx, it would recommend upgrading to 2.xx. The new ones are based on 4.0.4 and an updated Sense 4.0. It it much smoother, better multitasking and I get better battery life.
I would also suggest CleanROM 4.5 SE, since you will still have the stock experience and keep your unlocked bootloader and root.
You can do this without having to use the RUU, so it will be much easier.
Click to expand...
Click to collapse
I'm running clean rom 4.5 se...I'm on 1.85...flashed the 1.89 radio
Sent from my HTC One X using Tapatalk 2
My dad asked me to root his HTC Sensation after seeing my HTC Sensation and all its rooted glory... Well his phone had a different HBOOT. Mine was 1.27.0000 and his was 1.28.something maybe 0000? Well anyways so my HTC Sensation was left S-ON and I just Enabled SmartFlash using 4Ext and mine booted fine. His however I did S-OFF and both our bootloaders are unlocked and both are rooted.
I tried installing a custom ROM (same on mine) and now his Sensation is in a bootloop... The custom ROM in question is Elegancia - Sense 4.1 v3.1.0
I feel like it might be because he was running Gingerbread (I believe) and I was running ICS. However he loved the custom ROM I was using so is there any way?
Duulicious said:
My dad asked me to root his HTC Sensation after seeing my HTC Sensation and all its rooted glory... Well his phone had a different HBOOT. Mine was 1.27.0000 and his was 1.28.something maybe 0000? Well anyways so my HTC Sensation was left S-ON and I just Enabled SmartFlash using 4Ext and mine booted fine. His however I did S-OFF and both our bootloaders are unlocked and both are rooted.
I tried installing a custom ROM (same on mine) and now his Sensation is in a bootloop... The custom ROM in question is Elegancia - Sense 4.1 v3.1.0
I feel like it might be because he was running Gingerbread (I believe) and I was running ICS. However he loved the custom ROM I was using so is there any way?
Click to expand...
Click to collapse
Since the previous ROM was Gingerbread, the firmware would have been the older one. Just update the firmware to the latest 3.33 and the bootloops should be gone (if not try reflashing ROM after firmware update). There is a guide as well for updating the firmware.
Check the thread of the custom ROM you tried to install, it should state which firmware needs to be installed for this ROM.
nmaxim said:
Check the thread of the custom ROM you tried to install, it should state which firmware needs to be installed for this ROM.
Click to expand...
Click to collapse
Elegancia needs 3.33 firmware.
Sent from my HTC Sensation Elegancia 3.1.0 Sense 4.1 using xda premium
Duulicious said:
My dad asked me to root his HTC Sensation after seeing my HTC Sensation and all its rooted glory... Well his phone had a different HBOOT. Mine was 1.27.0000 and his was 1.28.something maybe 0000? Well anyways so my HTC Sensation was left S-ON and I just Enabled SmartFlash using 4Ext and mine booted fine. His however I did S-OFF and both our bootloaders are unlocked and both are rooted.
I tried installing a custom ROM (same on mine) and now his Sensation is in a bootloop... The custom ROM in question is Elegancia - Sense 4.1 v3.1.0
I feel like it might be because he was running Gingerbread (I believe) and I was running ICS. However he loved the custom ROM I was using so is there any way?
Click to expand...
Click to collapse
Hi,
If you want help,then, it is important that you post CORRECT information.
Otherwise you could be given wrong information which could lead to brick.
If he was running GB,then, his hboot would have been 1.18
If this is correct,then, post the COMPLETE hboot page,so that you can receive the correct guidance...
EDIT:
I notice you also have questions in the Help Thread.
Please keep your questions in ONE place.
Hello,
i try to find guide step by step install : ViperS 1.6.0 but i couldn't. I am running HTC sensation ICS with revolution HD till now but for ViperS must be different Kernel,Firmware,Radio,Ril.
Does anyone make guide because i did find useful?
Thanks a lot
ludutu said:
Hello,
i try to find guide step by step install : ViperS 1.6.0 but i couldn't. I am running HTC sensation ICS with revolution HD till now but for ViperS must be different Kernel,Firmware,Radio,Rial.
Does anyone make guide because i did find useful?
Thanks a lot
Click to expand...
Click to collapse
put the rom zip in the root of the sdcard and flash it from recovery
if you are S-ON i suggest you to install 4ext recovery(if you don't have it yet) and enable smartflash berfore flashing
also it works only with 3.32fw and 3.33fw version
but before everything do a nandroid backup first
rzr86 said:
put the rom zip in the root of the sdcard and flash it from recovery
if you are S-ON i suggest you to install 4ext recovery(if you don't have it yet) and enable smartflash berfore flashing
also it works only with 3.32fw and 3.33fw version
but before everything do a nandroid backup first
Click to expand...
Click to collapse
I got 4ext N S-off, i mean viper is use JB and works better, for kernel and ril etc every rom has recommended. I search here and i think this are :
Device: HTC Sensation Z710e
Bootloader: HBoot 1.27.1100 - Revolutionary S-OFF - Root - Super CID
ROM: ViperS 1.6.0 | Android 4.0.4 ICS | Sense 4.1
Kernel: Bricked-3.0-v1.36-ics
Firmware: 3.33.401.6
Radio: 11.76A.3504.00P_11.24A.3504.31_M
Ril: HTC-RIL_4.0.0037HMQ
Recovery: 4ext Recovery Touch 1.0.0.5 RC8
not the best but most of these i got just not sure for Radio and ril. That way i looking for guide .
indiferenc said:
viperS doesnt use JB. its on ICS 4.0.4, and if you are on ARHD aalready, you should be fine. you just nandroid, wipe, and flash. what exactly are you asking?
Click to expand...
Click to collapse
Ok but we make long story here :
First fully workable Sense 4.1 Rom
Android 4.0.4 ICS + Sense 4.1
HTC Ville C2 RUU (1.11.401.110 + 2.15.401.100)
Click to expand...
Click to collapse
Android 4.1, Jelly Bean, is the fastest and smoothest version of Android yet.
Ok . I ask do manual do all things i mean update 4.0 to 4.1 (i prefer 4.1 ) install radio, ril ..etc or all is in the pack.
Sorry but to move from one to other rom i must be sure for all that.
P.S. @indiferenc you are right for ICS but i really want to try JB
ludutu said:
Ok but we make long story here :
Android 4.1, Jelly Bean, is the fastest and smoothest version of Android yet.
Ok . I ask do manual do all things i mean update 4.0 to 4.1 (i prefer 4.1 ) install radio, ril ..etc or all is in the pack.
Sorry but to move from one to other rom i must be sure for all that.
P.S. @indiferenc you are right for ICS but i really want to try JB
Click to expand...
Click to collapse
if in the thread where you downloaded the rom requires to install radio and ril then you have to do it
ludutu said:
Ok but we make long story here :
Android 4.1, Jelly Bean, is the fastest and smoothest version of Android yet.
Ok . I ask do manual do all things i mean update 4.0 to 4.1 (i prefer 4.1 ) install radio, ril ..etc or all is in the pack.
Sorry but to move from one to other rom i must be sure for all that.
P.S. @indiferenc you are right for ICS but i really want to try JB
Click to expand...
Click to collapse
It is ics, not jb. Just install the Rom as usual.
Sent from my HTC6435LVW using xda app-developers app
ludutu said:
Hello,
i try to find guide step by step install : ViperS 1.6.0 but i couldn't. I am running HTC sensation ICS with revolution HD till now but for ViperS must be different Kernel,Firmware,Radio,Ril.
Does anyone make guide because i did find useful?
Thanks a lot
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=2082978
hello,
I have CM9 but I wanna to try viper 1.6.0, will I going to have any problem for that?
of course i will do wipe data, cache and dalvik...
anything else???
edit: i just see the link thanks... i'm going to flash now ...
All you need to do is make sure you have an unlocked bootloader, s-off, it's, 4ext recovery. Once you have all that just drop the rom on ur sd, go into recovery and install the rom from zip. If u need instructions on how to s-off, unlock ur bootloader or anything else just ask.
Sent from my HTC Sensation 4G using xda premium
When to transplant ONE S3 4.1ROM?
When to transplant ONE S3 4.1ROM?
Hello I want update my android version from 4.0.1 to latest my phone is att one x and firmware is 2.20 rooted.I don't want to install or flash any ROM just want to update android version. Additional info. My CID is SUPER CID because I changed it while root process. Another question do I get auto update? Thanks.
From what I understand there is great risk flashing the OTA when you're Cid is changed. You can try manually changing the Cid back and flashing.. I have not done this myself. May or may not work. I would wait for your rom of choice to incorporate the latest update changes..
Sent from my One X using xda app-developers app
exad said:
From what I understand there is great risk flashing the OTA when you're Cid is changed. You can try manually changing the Cid back and flashing.. I have not done this myself. May or may not work. I would wait for your rom of choice to incorporate the latest update changes..
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
The problem is that i have never flashed a ROM. Because I like sense interface. As far as I know due to the discussions on forum there is no
substitute for sense in aspect of camera. And there is always bugs on ROMs.
A majority of our roms are sense jb with no bugs at all ..go. check out viper xl or clean Rom jb or hatka or the other great roms we have
I'm using UrDroid JellyBean, which is as close to a stock JellyBean ROM as it gets. I'm not even sure he modified anything, to be honest.
Link: http://forum.xda-developers.com/showthread.php?t=2066023
as title.
Thanks
mrjayviper said:
as title.
Thanks
Click to expand...
Click to collapse
As long as the rom and the radio are compatable, you do not need to flash the radio.
AT&T HTC OneX
Android 4.1.1
ViperXL