[Q] Help! v21e kdz file - LG Optimus 3D

hey guys
so i was trying to flash my phone into v21e so i could install cm10 and such roms . however, i cant find a working kdz file. some say fatal error when im flashing yet the other says "page error" and random letters , causing for "rpoblem with communication betweencell phone and pc. can someone upload a working kdz file please?

AW: [Q] Help! v21e kdz file
Why you dont flash only fls file if you want to change baseband. Watch in board there is a thred for basebands.
Sent from my LG-SU760 using xda app-developers app

Make sure you have installed all the necesarry drivers. If you have already tried a couple of different .kdz files than the problem must be elswhere.
Sent from my LG-P920 using xda app-developers app

the problem is i cant find a working file for v21e that can be flashed. as for basebands, ive been quite unsuccessful following that post, so i have given up on that

tang097 said:
the problem is i cant find a working file for v21e that can be flashed. as for basebands, ive been quite unsuccessful following that post, so i have given up on that
Click to expand...
Click to collapse
Check if is this you want.
https://www.dropbox.com/sh/4274amnhn9mjjuw/9IcE2bgs8O
If not thereĀ“s the file just waith because i start upload now.
Sorry my english i hope you undesrtand.

um...rar file. that means ill have to unzip it, and make it a zip file. WHICH means ill have to install via CWM. but would that allow me to use cm10 WITHOUT errors? cause my main goal was to install v21e BB

tang097 said:
um...rar file. that means ill have to unzip it, and make it a zip file. WHICH means ill have to install via CWM. but would that allow me to use cm10 WITHOUT errors? cause my main goal was to install v21e BB
Click to expand...
Click to collapse
No you dont.
This contains 2 files to install but not by CWM.:good:

Here you have a link with all of the official KDZ firmwares:
LG Phone Firmware

Related

Putting new baseband on froyo? Is it possible? Please help

Can anyone tell me how to put the new baseband on sinister series dark 1.3? I know its group but I have heard so many good things about the new baseband and wanted to put it on my phone. I hope someone can help me.
Sent from my LG-P999 using XDA Premium App
flash rooted stock rom
flash stock recovery
unroot using super one click
flash the recently leaked gb update using kdz or lg update tool.
reflash to cwm.
flash whatever rom you want.
instructions are really easy to find.
or have a little patience since the developer said he is working on an update to 2.3.3 for dark sinister
crazythunder said:
flash rooted stock rom
flash stock recovery
unroot using super one click
flash the recently leaked gb update using kdz or lg update tool.
reflash to cwm.
flash whatever rom you want.
instructions are really easy to find.
Click to expand...
Click to collapse
Hey ct,
so I just tried to update using LG tool.
Steps I did-
*flashed stock rom
*flashed stock recovery*
*didn't unroot***
*tried flashing update (1st time it said I could update and then it stopped and said to contact LG or restart)
(2nd try it said I had no update, that I was up to date)
So why did it try the 1st time and not the 2nd?
Should I unroot?
Not sure where to go from here!
Any help would be appreciated! Thanks!
htc2364 said:
Hey ct,
so I just tried to update using LG tool.
Steps I did-
*flashed stock rom
*flashed stock recovery*
*didn't unroot***
*tried flashing update (1st time it said I could update and then it stopped and said to contact LG or restart)
(2nd try it said I had no update, that I was up to date)
So why did it try the 1st time and not the 2nd?
Should I unroot?
Not sure where to go from here!
Any help would be appreciated! Thanks!
Click to expand...
Click to collapse
flash the kdz file using kdz flash tool
crazythunder said:
flash the kdz file using kdz flash tool
Click to expand...
Click to collapse
Where is the kdz file, and what is a kdz flash tool?
SaHiLzZ said:
Where is the kdz file, and what is a kdz flash tool?
Click to expand...
Click to collapse
i posted it like 5 times tonight. last time.....
here's the kdz file
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP999DW/ATMODW/V21e_00/V21E_00.kdz
and here's the kdz flasher
http://www.mediafire.com/?3hd4ao113lx8gq4
kdz flash tool is like ruu for windows mobile.
crazythunder said:
i posted it like 5 times tonight. last time.....
here's the kdz file
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP999DW/ATMODW/V21e_00/V21E_00.kdz
and here's the kdz flasher
http://www.mediafire.com/?3hd4ao113lx8gq4
kdz flash tool is like ruu for windows mobile.
Click to expand...
Click to collapse
what do I put in
TYPE - ?
Phone Mode - ?
htc2364 said:
what do I put in
TYPE - ?
Phone Mode - ?
Click to expand...
Click to collapse
nevermind, found it!
But now to figure out how to make it work on windows 7!
htc2364 said:
what do I put in
TYPE - ?
Phone Mode - ?
Click to expand...
Click to collapse
cdma and diag. leave it set to it's default. and make sure you do it from a 32 bit pc.
htc2364 said:
nevermind, found it!
But now to figure out how to make it work on windows 7!
Click to expand...
Click to collapse
a few people have done it on win7. but i think most had issues, especially on 64 bit win7.
xp mode
http://www.microsoft.com/windows/virtual-pc/download.aspx
crazythunder said:
xp mode
http://www.microsoft.com/windows/virtual-pc/download.aspx
Click to expand...
Click to collapse
Thanks, I tried that, but I cant download because I have W7 home premium and I guess I need professional! Grrrrrrrr!.
Its trying to update!
I just got a message that there was a miscommunication between the pc and phone and I just restarted so we will see!
*crossfingers**
htc2364 said:
Thanks, I tried that, but I cant download because I have W7 home premium and I guess I need professional! Grrrrrrrr!.
Its trying to update!
I just got a message that there was a miscommunication between the pc and phone and I just restarted so we will see!
*crossfingers**
Click to expand...
Click to collapse
i got that error a hundred times while trying on win7 64 bit. finally worked with kdz flash after i installed xp 32 bit to a spare partition.
does this just flash the baseband??

Help, problems with booting LG P920

Hello, I have a LG P920. When I was going to root it and install an ICS rom I tried to install the u-boot and x-loader from wkpark. But for som reason the phone wouldn't boot, so it got stuck in a bootloop. After trying to fix it several ways i ended up with it boot directly into recovery and when I try to flash a boot.img it says that it doesn't excist any boot partiton. I have really no idea what to do to fix it. Please help. In advance thank you.
Did you try flash *.bin or *.kdz ??
And what you mean with "when I try to flash boot.img ..." the recovery can not flash a *.img
Just *.zip which contain :- boot.img and META-INF .
Here is the link :-
http://forum.xda-developers.com/showthread.php?t=1629307
Yeah, try flashing with lg flashtool
Sent from my P920 using ICS 4.0.4 by XBSA
When I said flash boot.img I meant trough fastboot, followed this tutorial. And for some reason I cannot access recovery, it is highly possible that I am doing that the wrong way.
I have tried to use LG Flasht tools, but I think I'm doing something wrong. And when thats said, I'm not completly sure in which mode I should be in, meaning fastboot, recovery, download mode. The problem is that when I try using flash tools, it seems when I set it to use port 1 in flash tools nothing happends. When comparing to other screenshots, I can also see that in flash tools it doesn't recognise, or at least not telling me (at the top info bar) what model, or S/W just the file name.
I kind of tried smart flash from the link, but I ended up with a complete wipe, and it seemed like it hadn't been flashed any new rom.
About the mode just remove sim , sd card and the battery press and hold vol up and then connect it to the computer .
About the port , first you should change the port from windows device manager to port 1 .
I'm sorry about the boot.img ...etc . So I see many people in XDA extract the *.zip and flash it with CWM . In XDA I saw every thing
Sent from my LG-P920
Hey this happened to me yesterday
If u can boot to recover then just do a restore if u have a backup this worked for me
Sent from my LG-SU760 using xda app-developers app
I have the same problem. I tried all ways to solve but they didn't work.
I flashed ICS Rom for my P920 from xbsall, but I had some problems about signal. The calls are always disconnected while Wifi 3G work normally.
I decided to flash v21.e ROM ( GB) again but the phone just stuck at Logo LG (I tried both kdz or bin file). Seems to be hopeless :crying:. I also realize that the Emergency mode disappeared ( The screen just flashed fast and off ).
The problem is solved if I flash ICS ROM back, but I don't want to.
Need help from you guys !
dandavid3000 said:
I have the same problem. I tried all ways to solve but they didn't work.
I flashed ICS Rom for my P920 from xbsall, but I had some problems about signal. The calls are always disconnected while Wifi 3G work normally.
I decided to flash v21.e ROM ( GB) again but the phone just stuck at Logo LG (I tried both kdz or bin file). Seems to be hopeless :crying:. I also realize that the Emergency mode disappeared ( The screen just flashed fast and off ).
The problem is solved if I flash ICS ROM back, but I don't want to.
Need help from you guys !
Click to expand...
Click to collapse
What bin have you flashed? I guess you havent used the one from xbsalls guide..
Sent from my P920 using ICS 4.0.4 by XBSA
TMProduct1onZ said:
What bin have you flashed? I guess you havent used the one from xbsalls guide..
Sent from my P920 using ICS 4.0.4 by XBSA
Click to expand...
Click to collapse
I used it but it didn't work
Link here http://forum.xda-developers.com/showthread.php?t=2001953
and http://forum.xda-developers.com/showthread.php?t=1942836
dandavid3000 said:
I used it but it didn't work
Link here http://forum.xda-developers.com/showthread.php?t=2001953
and http://forum.xda-developers.com/showthread.php?t=1942836
Click to expand...
Click to collapse
just use xbsall repair method
I have fixed the phone. After doing a lot of what I don't know what I do. I finally realised that one of my biggest problems was that I used a 64 bit windows 7 computer. The way I fixed mine was trough setting it in normal download mode and you smart flash to get it to an original rom. If anybody need to try what I did and need help from me, if I can provide it. You should send a PM because I am never in the LG P920 thread beacuse I was fixing a friends phone. So as for me this thread can be closed moderators.

[Q] error flashing baseband lg su760

hi i am using lg o3d su760 last week suddenly my phone disappear imei so i try to flash bin & fls using smart flash tool & lg flash tool it did not success...before i flashed successfully tried different version of android version it working but now i cant able to flash any android version.using any flashing method including kdz format. the thing is i can able to successfully flash bin file only so i can install any android version it worked phone booted but there is no imei if i select any fls file using smart-flash tool and lg flash tool always getting error at 55% Req StartA error please any one help me...is there any other-way to flash base-band????????
bond905 said:
hi i am using lg o3d su760 last week suddenly my phone disappear imei so i try to flash bin & fls using smart flash tool & lg flash tool it did not success...before i flashed successfully tried different version of android version it working but now i cant able to flash any android version.using any flashing method including kdz format. the thing is i can able to successfully flash bin file only so i can install any android version it worked phone booted but there is no imei if i select any fls file using smart-flash tool and lg flash tool always getting error at 55% Req StartA error please any one help me...is there any other-way to flash base-band????????
Click to expand...
Click to collapse
which version are you trying? ics or gb?
Try with KDZ Flashing Software >> http://forum.xda-developers.com/showthread.php?t=2191698
If you want to write imei on phone just try this guide >> http://forum.xda-developers.com/showthread.php?t=1734330
kdz also not working..
Unique Boy said:
which version are you trying? ics or gb?
Try with KDZ Flashing Software >> http://forum.xda-developers.com/showthread.php?t=2191698
If you want to write imei on phone just try this guide >> http://forum.xda-developers.com/showthread.php?t=1734330
Click to expand...
Click to collapse
i already mention kdz method also not working always getting error in 16%......
Baseband flashing does not complete to 100% like a .bin. It normally 'fails' after 80 seconds or so in FT, around 55%. After attempting flashing, check your baseband in Settings About Phone and see what it says.
drastic00 said:
Baseband flashing does not complete to 100% like a .bin. It normally 'fails' after 80 seconds or so in FT, around 55%. After attempting flashing, check your baseband in Settings About Phone and see what it says.
Click to expand...
Click to collapse
in about phone it says xm6222 ics baseband it will not change if i flash any baseband...
You might need to fix imei first but I am not sure. It has never happened to me.

[Q] Binary Failed (Flashing Rom)

Hi guys, I'm actually trying to get the pacman rom 4.2.2 But there's no way to get it, I've tryed with CyanogenMod and it doest work... I just get this image and i dont know what thell do because im noobie at this android thing! Just got 3 days with the phone,Its an htc one s, If someone can help me ill appreciate it and sorry for the english,Years without practice it
Its an odd one dude, try getting a fresh copy of the ROM, then shutting down your phone and repeat the wiping process and reflash ?
Sent from my One S using xda premium
I have had similar issues when a rom zip is corrupted. Like blackcell said you should try redownloading the rom or trying another rom just to check if that zip is the issue.
inXavier said:
Hi guys, I'm actually trying to get the pacman rom 4.2.2 But there's no way to get it, I've tryed with CyanogenMod and it doest work... I just get this image and i dont know what thell do because im noobie at this android thing! Just got 3 days with the phone,Its an htc one s, If someone can help me ill appreciate it and sorry for the english,Years without practice it
Click to expand...
Click to collapse
Use twrp 2.4.0.0 recovery. Rest of them have many bugs.
2.3.3.0 is best
Sent from my HTC One S using xda premium
vatsaman said:
Use twrp 2.4.0.0 recovery. Rest of them have many bugs.
Click to expand...
Click to collapse
It says the same thing, Failed with twrp 2.4.0.0 with that file that u says came a .MD5 file do i need to do something with that file? I think thats the problem but i was looking at google and i couldnt find anything about it..
inXavier said:
It says the same thing, Failed with twrp 2.4.0.0 with that file that u says came a .MD5 file do i need to do something with that file? I think thats the problem but i was looking at google and i couldnt find anything about it..
Click to expand...
Click to collapse
No need of MD5 files, what version of recovery are you on ?

Problem in flashing any roms-Status 6 error

I've wiped my galaxy s4 completely only to find that no matter what rom try to flash, an error occurs saying something like:
Status 6 error, Unable to open package
I also tried flashing a different kernel and recovery but no use...it gives same error with all the kernels.
Please tell me what am i doing wrong here
kushal_neov said:
I've wiped my galaxy s4 completely only to find that no matter what rom try to flash, an error occurs saying something like:
Status 6 error, Unable to open package
I also tried flashing a different kernel and recovery but no use...it gives same error with all the kernels.
Please tell me what am i doing wrong here
Click to expand...
Click to collapse
You trying to flash trough ODIN?
And what Model phone, I9505, I9500 or any other variant...
If you're trying to flash with ODIN, make sure that Kies is completely shut down or, better yet, uninstalled.. This can cause problems.
When you select the rom to install are you trying to flash zip files or .tar files. ODIN on the PC flashes .tar/tar.md5 files only... If you have a stock rom in zip format, extract to the .tar file.
Same with root and recovery. You need to have .tar files... Don't extract any further than that...
Try a different cable or usb port if problems persist. If you still get no love try a different PC\laptop.
All the above instructions are for windows PC...
If you have an I9505 I like to root the phone then flash all other things using Mobile ODIN(I purchased it) there is a free version floating around the forum but it is worth the few $ to get the pro version...
kushal_neov said:
I've wiped my galaxy s4 completely only to find that no matter what rom try to flash, an error occurs saying something like:
Status 6 error, Unable to open package
I also tried flashing a different kernel and recovery but no use...it gives same error with all the kernels.
Please tell me what am i doing wrong here
Click to expand...
Click to collapse
Which firmware are u on??? If its on the new mf3 then u are screwed
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Demented22 said:
Which firmware are u on??? If its on the new mf3 then u are screwed
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Idk much about Build number...it ended with MG1.
ultramag69 said:
You trying to flash trough ODIN?
And what Model phone, I9505, I9500 or any other variant...
If you're trying to flash with ODIN, make sure that Kies is completely shut down or, better yet, uninstalled.. This can cause problems.
When you select the rom to install are you trying to flash zip files or .tar files. ODIN on the PC flashes .tar/tar.md5 files only... If you have a stock rom in zip format, extract to the .tar file.
Same with root and recovery. You need to have .tar files... Don't extract any further than that...
Try a different cable or usb port if problems persist. If you still get no love try a different PC\laptop.
All the above instructions are for windows PC...
If you have an I9505 I like to root the phone then flash all other things using Mobile ODIN(I purchased it) there is a free version floating around the forum but it is worth the few $ to get the pro version...
Click to expand...
Click to collapse
I've I9500 and I am trying to flash the roms via cwm recovery.
Ooh ok, I dint know that version of the s4
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

Categories

Resources