So now i have xoom mz 600 with 3.0.1 android! On it android i have special settings in my baseband(radio) , Will the settings still be on xoom after update to eos3 ?:
If you install the mz600 version.
Sent from my SAMSUNG-SGH-I747 using xda premium
1
d3athsd00r said:
If you install the mz600 version.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
which version i need for eos 3 ???
Try the MZ604. It's the 4G version but in theory should support the 3g only version. The worst that can happen is a boot loop and then your restore the backup you made prior to flashing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Related
I like to to ask if there's a way i can improve the signal of my Atrix 2? There are time I loss my signal and can't receive calls or txt message. If by changing Rom can improve this problem? Thanks
Sent from my MB865 using xda premium
Get and try a new sim card first.
Sent from my SAMSUNG-SGH-I997 using xda premium
ryuben2k said:
I like to to ask if there's a way i can improve the signal of my Atrix 2? There are time I loss my signal and can't receive calls or txt message. If by changing Rom can improve this problem? Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Are you coming from another phone, say, a 3G phone that the retailer may have taken the SIM card from and put into your A2?
The ATRIX 2 is a 4G phone, and if the SIM card from a 3G phone is used it will cause connectivity issues.
Sent from my MB865 using xda premium
Yes,i used my sim card on my nokia phone and also on my Samsung galaxy pro. I don't have any issue to both phone before.
Sent from my MB865 using xda premium
ryuben2k said:
Yes,i used my sim card on my nokia phone and also on my Samsung galaxy pro. I don't have any issue to both phone before.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Not familiar with those phones. Try going to your provider's retail store and have them swap the SIM, that's where I'd start. I always request a new SIM card with each new phone, as they do have a shelf life -especially when swapping between two or more devices.
Sent from my MB865 using xda premium
ryuben2k said:
I like to to ask if there's a way i can improve the signal of my Atrix 2? There are time I loss my signal and can't receive calls or txt message. If by changing Rom can improve this problem? Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Try my bullet rom. I have netspeed tweaks + supercharged. Which increases data connectivity.
*youll notice the difference on boot when u see how fast the data connects*
Hope it helps
Sent from my MB865 using xda premium
Are you in the US? Which atrix2 are you using?
What I noticed is that the at&t version is so tuned to at&t that it might have issues when you run it over other network because of some small frequency differences.
Previously I was using captivate which was also an at&t phone and I had similar problem but over time, there were several radio firmware that you could flash over and improve (or worsened ) the signal quality.
The atrix2 is not there yet..
Sent from my MB865 using XDA
The 4g label in atrix2 is actually 3g.
Sent from my MB865 using XDA
ari197 said:
The 4g label in atrix2 is actually 3g.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
I thought it was HSPA+ and/or 4G LTE "ready" when the LTE areas began to come into markets.
Sent from my MB865 using xda premium
rdavisct said:
Try my bullet rom. I have netspeed tweaks + supercharged. Which increases data connectivity.
*youll notice the difference on boot when u see how fast the data connects*
Hope it helps
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Actually,im planning to install bullet rom but i just want to clarify if i still need to install the j.y.daddy global or just proceed installing it thru bootstrap. Thanks
Sent from my MB865 using xda premium
ryuben2k said:
Actually,im planning to install bullet rom but i just want to clarify if i still need to install the j.y.daddy global or just proceed installing it thru bootstrap. Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Check your post titled, "Best ROM for atrix 2 losses signals"...
Sent from my MB865 using xda premium
ryuben2k said:
Actually,im planning to install bullet rom but i just want to clarify if i still need to install the j.y.daddy global or just proceed installing it thru bootstrap. Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Nop, you can proceed with the bootstrap but the thing of having CWM on boot it's that it something goes wrong when you install another rom (boot loop or something similar) is that you can reverse the damage by restoring a backup or flashing a another rom you have.
If you install the bullet rom keep in mind that it comes already with the CWM on boot feature so you don't need bootstrap anymore
jfrank1485 said:
Nop, you can proceed with the bootstrap but the thing of having CWM on boot it's that it something goes wrong when you install another rom (boot loop or something similar) is that you can reverse the damage by restoring a backup or flashing a another rom you have.
If you install the bullet rom keep in mind that it comes already with the CWM on boot feature so you don't need bootstrap anymore
Click to expand...
Click to collapse
Yup,that's what im thinking,i don't need to install CWM to run custom rom. But just like you said incase that i encounter problem i can't reverse the damage. I followed the instruction to put both the bootstrap and the CWM on the root of my SD card. I installed the bootsrap first and boot, and when im about to install the zip file of CWM, i can't find it. I tried many times to copy and paste and still the same,i can't find the CWM zip. What do you think is the problem?
Sent from my MB865 using xda premium
ryuben2k said:
Yup,that's what im thinking,i don't need to install CWM to run custom rom. But just like you said incase that i encounter problem i can't reverse the damage. I followed the instruction to put both the bootstrap and the CWM on the root of my SD card. I installed the bootsrap first and boot, and when im about to install the zip file of CWM, i can't find it. I tried many times to copy and paste and still the same,i can't find the CWM zip. What do you think is the problem?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You copied straight to the sdcard and not INTO a folder already on the sdcard, right?
Sent from my MB865 using xda premium
Apex_Strider said:
You copied straight to the sdcard and not INTO a folder already on the sdcard, right?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I copied and paste it on my sdcard.
Sent from my MB865 using xda premium
ryuben2k said:
Actually,im planning to install bullet rom but i just want to clarify if i still need to install the j.y.daddy global or just proceed installing it thru bootstrap. Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
No,no need for that as my rom comes with cwm on boot.
Sent from my MB865 using xda premium
rdavisct said:
No,no need for that as my rom comes with cwm on boot.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
And there ya have it. Seriously, rdavisct makes some kick A$$ roms!
Sent from my MB865 using xda premium
Phone's signal is depended on hardware and its related firmware (baseband), so do not try many Roms to find the best for better signal (now we can't try to flash new baseband due to locked bootloader).
I searched the threads for an answer but could not find one.
I keep getting an error (error 7) while trying to flash on my Xoom. I tried to fix permissions. That did not work.
Sent from my Xoom using xda premium
ocdrummer2011 said:
I searched the threads for an answer but could not find one.
I keep getting an error (error 7) while trying to flash on my Xoom. I tried to fix permissions. That did not work.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
have you try with twrp recoVery ?
I would try but I can't seem to flash any other recovery than clockwork mod. I downloaded the other recovery but can't get it on my SD card to flash.
Sent from my Xoom using xda premium
I flashed twrp and it still gives me the same error.
symlink: some symlinks failed
Error in /sdcard/download/ (name of file)
Status 7
I've searched Google for 2 days and have not found an answer.
Sent from my Xoom using xda premium
ocdrummer2011 said:
I flashed twrp and it still gives me the same error.
symlink: some symlinks failed
Error in /sdcard/download/ (name of file)
Status 7
I've searched Google for 2 days and have not found an answer.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
You must flash gapp CNA before install cna rom, then flash gapp again
Sent from my MZ601
Awesome. Thanks.
I've got another problem with the rom. I have a wifi connection but no 3g. I choose the 3g Xoom version when downloading straight from CNA's site. Not sure why this is happening.
Sent from my Xoom using xda premium
ocdrummer2011 said:
Awesome. Thanks.
I've got another problem with the rom. I have a wifi connection but no 3g. I choose the 3g Xoom version when downloading straight from CNA's site. Not sure why this is happening.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
what type of your xoom? if your xoom type MZ601 choose CNA XOOM-EURO
Sent from my MZ601
My model is mz602.
Sent from my Xoom using xda premium
ocdrummer2011 said:
My model is mz602.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
i think its call XOOM 4G http://developer.motorola.com/products/xoom/
u should download this:
http://goo.im/devs/codenamedroid/stable/XOOM-4G
It worked. Thanks my man.
Sent from my Xoom using xda premium
I had the non us version of the nexus s. It was stuck on 2.3.3. I dont recall where i got the update( I downloaded one from one of the threads on xda as there was no update available whenever I checked for ota) but I flashed it with 2.3.6. After that I received notifications for ics 4.0 then after applying that ota I got one for 4.0.4 I believe then one for jelly bean 4.1.2. Though all the updates went fine now I dont get signal on any network. When I look for manual network search it shows unknown network found and I cant connect. Could this be because I might have flashed a cdma version? If so how can i go back to stock 4.1.2 for the gsm model?
Start with this flash factory for the device http://forum.xda-developers.com/showthread.php?p=33956691
Sent from my Nexus S 4G using xda app-developers app
n2d551 said:
Start with this flash factory for the device http://forum.xda-developers.com/showthread.php?p=33956691
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse
I will try it in a a few days as my cuz took the phone to a different city. Just a quick question should I go back to 2.3.3 stock? Or 4.1.2?
Sent from my HTC_Amaze_4G using xda app-developers app
It's a preferred thing. I personally would go with ics, while a few swear that gb is faster & stable
Sent from my Nexus S 4G using xda app-developers app
Hi all I was wondering if there are any unbrick/bootloop rescue for JB yet? I've searched all over and cant find anything. Any info would be appreciated.
Sent from my GT-P3113 using xda app-developers app
If you can enter download mode I think the common fix would be odin or kies
Sent from my GT-P3110 using xda app-developers app
Yeah I know of an unbrick for ICS but read nothing about one for JB.
Sent from my DROID RAZR using xda app-developers app
mikelikesbikes said:
Yeah I know of an unbrick for ICS but read nothing about one for JB.
Click to expand...
Click to collapse
It's the same fix. Download the stock JB rom image from samfirmware.com and install it using Odin.
Awesome news! I have been waiting to root and dig into my tab since the JB ota cause I hadn't heard of a way out if I goof, or the inevitable boot loop. Flash using Odin 1.85 like ICS?
Sent from my DROID RAZR using xda app-developers app
I want to go back to ICS but would that harm it like will it brick
Sent from my Amazon Kindle Fire2 using xda app-developers app
supersonic023 said:
I want to go back to ICS but would that harm it like will it brick
Sent from my Amazon Kindle Fire2 using xda app-developers app
Click to expand...
Click to collapse
To go back to (ics) you have to go all the way back to gingerbread 2.3.6 here is what you need http://forum.xda-developers.com/showthread.php?t=1613523 when you finish you can flash the ics rom you want.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Well can you flash ICS and be done with it because when I use odin it freezes up and it does not respond :/ and then again I am using USB 1.0
Well I. Just saying can I just flash back down to ICS because y do I have to use odin
Sent from my Amazon Kindle Fire2 using xda app-developers app
No the partitions are differents if you are on jellybean and you flash an ics rom you will brick your phone.
Sent from my SGH-I997 using XDA Premium 4 mobile app
OK :/ well can I flash another jb ROM then because the ROM I have witch is carbon because I need good battery life and it needs to be fast
Sent from my Amazon Kindle Fire2 using xda app-developers app
supersonic023 said:
OK :/ well can I flash another jb ROM then because the ROM I have witch is carbon because I need good battery life and it needs to be fast
Sent from my Amazon Kindle Fire2 using xda app-developers app
Click to expand...
Click to collapse
Yes you can, there are many jellybean roms pick the one you like.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Also like if I flash a 4.1.2 ROM would that brick because that's jb BTW I have 4.2.2
Sent from my Amazon Kindle Fire2 using xda app-developers app
Use Odin back to stock with root from Scott, then find a cwm
You must first install kies on your pc to get the drivers foot download mode
If you succeeded, then here is your first step to flash a
ROM.
This is a thread for a working CWM on infuse.I used the
04.30 1.2GHz version and you can install it without
going into recovery mode using SGS Kernel Flasher in
play store for free:
forum.xda-developers.com/showthread.php?p=25724638
Next flash a cm9 rom.I suggest Enthropy CM9.
Many thanks to Enthropy,scott.hart.bi,qkster,connor baker and all people supporting the old, but revitalised Infuse 4g