[Q] xperia tipo not boot - Sony Xperia Miro, Tipo (Dual), J, E

hi all ihave an xperia tipo dual sim i installed boot.img throw flash tool then i cant open or boot to my system or to recovery any thing i cant open my tipo only 3 red light blinking and phone cant be open (boot) Please Help ME :crying::crying:
i tring to try repair my phone throw pc companion but it say you have modified softwire you cant to repair

Which boot.img did you use?
Get ftf for your phone and flash it with flashtool.
Sent from my ST27i

when that color light blink press (+)Volume key you will enter in recovery mod..... i think u have flash FXP boot image
remove battery again insert and hold (-)vol key and connect USB and flash TFT of tipo Dual
here the link http://forum.xda-developers.com/showthread.php?t=2001567

try to flash the boot.img again. to do that
start your phone and hold the power and volume button and connect your phone to your pc. [it will take too much time so keep trying] after 3-5 minutes you will see a violet/blue light then flash.
Click to expand...
Click to collapse
same thing happens to me 4 weeks ago.

help
if i have any proplems or issus i will post here please being in touch:angel::angel:

Related

experia tipo no fast boot or flash

hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me:angel:
Switch phone off, keep flashtool prepared to flash file ready on pc, then it will prompt to connect phone when files are ready, then press vol down and hold it and plug USB cable. After it is detected by flashtool, flashing begins.
You can use fastboot flashing only after bootloader unlocking.
Sent from my ST27i
no thing happens no led or no thing
satan89 said:
Switch phone off, keep flashtool prepared to flash file ready on pc, then it will prompt to connect phone when files are ready, then press vol down and hold it and plug USB cable. After it is detected by flashtool, flashing begins.
You can use fastboot flashing only after bootloader unlocking.
Sent from my ST27i
Click to expand...
Click to collapse
no thing happens no led or no thing i only if iprees power only 3 red led
please help me i cant repair my phon e i have unlock bootloader
three red LED blinks means low battery!!!
joehoor said:
no thing happens no led or no thing i only if iprees power only 3 red led
please help me i cant repair my phon e i have unlock bootloader
Click to expand...
Click to collapse
The three red LED blinks means that your phone is out of battery. but the instructions are perfect for flash mode. it worked on my Tipo single sim when i had to flash stock os yesterday.
its simple
joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me:angel:
Click to expand...
Click to collapse
check if red led flashes when u connect the charger
let it charg for 3 hrs
then hold lock button + volume down button
u will see a green light for a brief moment
get latest flashtool (google it)
and ftf firmware from http://forum.xda-developers.com/showthread.php?t=2001567
install it and drivers from it install them all
open flashtool
get your ftf file in C/flashtool/firmware
then again get green led as mentioned above but this time connect your phone to pc
flastool will indicate that ur phone is connected
then click the lightning icon select flashmode
select ftf file that you downloded
after flash save the log if somerthing wrong is there like header missing
reflash it or redownload it
reboot the phone
voila

Help please !! Big problem

I unlocked my Xperia L bootloader , but after that it started to bootloop...I went to flash this : http://forum.xda-developers.com/showthread.php?t=2356876
but whenever i connect my phone to flash mode it gives me a green light then the light goes !! And I dont know what to do
Notice : I have flashtool 0.9.10 and not 0.9.11 ,, I dont think it matters..but i will give it a try to update
Sparksys said:
I unlocked my Xperia L bootloader , but after that it started to bootloop...I went to flash this : http://forum.xda-developers.com/showthread.php?t=2356876
but whenever i connect my phone to flash mode it gives me a green light then the light goes !! And I dont know what to do
Notice : I have flashtool 0.9.10 and not 0.9.11 ,, I dont think it matters..but i will give it a try to update
Click to expand...
Click to collapse
Firstly, after unlocking, it will 100% bootloop, so we must flash a stock rom.
Secondly, how to use flashtool to flash a stock is click the thunder first in flashtool, choose flashmode, choose the firmware you want, then wait for some seconds the flashtool is preparing the files, when prompted to connect via flashmode, turn off your phone and connect while hold vol down button, it will blink red then green, the green light is not holding, but wait for at least 3 seconds till the flashtool detected your phone, then it will flashing.
Thirdly, didn't you ever flashing via flashmode in Xperia L before?
Sent from my C2105 using xda app-developers app
karkand said:
Firstly, after unlocking, it will 100% bootloop, so we must flash a stock rom.
Secondly, how to use flashtool to flash a stock is click the thunder first in flashtool, choose flashmode, choose the firmware you want, then wait for some seconds the flashtool is preparing the files, when prompted to connect via flashmode, turn off your phone and connect while hold vol down button, it will blink red then green, the green light is not holding, but wait for at least 3 seconds till the flashtool detected your phone, then it will flashing.
Thirdly, didn't you ever flashing via flashmode in Xperia L before?
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
Yes , I used flashtool on my old phone Sony Ericsson Live With Walkman ..
Why I Panic : Thats because I didnt see my xperia L hold the green light so i thought that its not being able to go to flash mode .. On my old phone it used to hold the green light.... Problem Solved ..
I just thought my phone wasnt getting to flash mode because it didnt hold the green light.. Anyway I flashed a stock ROM .. Everything is working
don't just see your phone,,but see the flashtool which read accurately your phone is connected to

Tutorial: Fix Xperia C softbrick with red led and no Sony logo

Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
Xperia C with red light softbrick
MicroUSB Cable
Sony Update Service
Click to expand...
Click to collapse
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
I flashed a faulty recovery using mobileuncles and there was no signs of life other than a red led liggt, and holding power + volume up works just fine and it went into flashmode.
I have the same issue.
I organized xperia light rom for our xperia c, I flashed it from custom recovery. Phone is completely dead now.
There is a just red light, phone does not go into download or fastboot mode. Pc Companion, Sony Update Center, Wmshua Flashtool do not recognize the phone.
Any suggestion with that?
I don't have warranty, my last option is to pay money for technical service.
this worked for me but instead of POWER+VOL UP i used POWER+VOL DOWN
thanks
thank, i like this forum
worth to try... (hope it won't happen to me :laugh: )
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
seiferfury said:
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
Click to expand...
Click to collapse
How did it
How Catch 4 buttons simultaneously
Please reply to the importance of
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
zergmac023 said:
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
Click to expand...
Click to collapse
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
(
TacoNikky said:
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
Click to expand...
Click to collapse
Which probably crying::crying::crying:
yeubeo168 said:
Which probably crying::crying::crying:
Click to expand...
Click to collapse
I have bought motherboard from china http://www.yoybuy.com/en/show/37431065583/ from this seller.
It took 20 days to arrive to Turkey. I have changed my motherboard and my phone is back right now :victory:
It works like a charm. Model number changed, it shows s39h but phone works like old days :good:
A detailed guide :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
It worked!!!!!
GethPrime said:
Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Click to expand...
Click to collapse
It worked for my Xperia M (rooted on JB 4.3) with a locked bootloader which was STUCK on bootloop screen and when I did the whole thing with holding the power and volume up button (after I let the battery die after so many bootloops it did), FINALLY I was able to take it to flashmode, while I had selected from Sony PC Companion to repair my phone, and after 3-4 tries, I DID IT!!! Thank you so much for this thread ( I DEFINITELY pressed the "thanks" button), it really SAVED ME time and money (because I was planning to send it to Sony to fix it and you ALL know how bastards Sony is)!!!! And to all those of you who are DESPERATE to fix their phone (I hope you read this thread), DON'T PANIC, and DON'T GIVE UP!!! It took me 2 days of searching the web, and FINALLY I MADE IT!!! There are ALWAYS solutions to these kinds of problems!!!!
red light
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Need help
same here only red light is blinking,,,i tried doing Power+vol up and Power+vol down and by inserting cable also...it just show a red light when plugged in
i'm also having the same problem....somebody please help!!!!really need to use it
kamran.kerim said:
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Click to expand...
Click to collapse
i'm also having the same problem....somebody please help!!!!really need to use it
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
Does that mean phone is dead?
choxx said:
Does that mean phone is dead?
Click to expand...
Click to collapse
no all you need stock kernel
you can either google it or download ftf and check all except kernel
done

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

Stuck in bootloop after a failed flash

I already had a Cyanogen ROM on my Xperia Z5 and was browsing the forum here and saw a Paranoid android ROM so I wanted to try that. I had CWM recovery on it, went into recovery and wiped the necessary parts. Then flashed the rom zip and the gapps. After that I rebooted but the phone kept shutting down and only blinking a red light.
So I connected it to my computer and put it in Flash mode, used Flashtool to put it back to stock. While stock was being flashed on it and halfway it gave an error (which I don't remember) and the phone booted. I assumed it was correct, it gave the white screen with the 'Sony'. After that came a black screen with the 'update failed, please connect to a computer'.
This screen is on for half a second. Then the screen turns off and the same process begins with the sony and then error. This keeps looping when charging or connected to a computer. The Xperia Companion doesn't help and I can't get it in flash mode of fastboot. It is hardbricked and what should I do?
If you need more information I'd be happy to provide it asap.
Edit: It's the same problem with as this thread only the solutions provided won't work
Baltiweed said:
I already had a Cyanogen ROM on my Xperia Z5 and was browsing the forum here and saw a Paranoid android ROM so I wanted to try that. I had CWM recovery on it, went into recovery and wiped the necessary parts. Then flashed the rom zip and the gapps. After that I rebooted but the phone kept shutting down and only blinking a red light.
So I connected it to my computer and put it in Flash mode, used Flashtool to put it back to stock. While stock was being flashed on it and halfway it gave an error (which I don't remember) and the phone booted. I assumed it was correct, it gave the white screen with the 'Sony'. After that came a black screen with the 'update failed, please connect to a computer'.
This screen is on for half a second. Then the screen turns off and the same process begins with the sony and then error. This keeps looping when charging or connected to a computer. The Xperia Companion doesn't help and I can't get it in flash mode of fastboot. It is hardbricked and what should I do?
If you need more information I'd be happy to provide it asap.
Edit: It's the same problem with as this thread only the solutions provided won't work
Click to expand...
Click to collapse
Did you try to turn off phone and press and hold power and volume up butto to see is the phond vibrate 4 times after few seconds.
Second,try older version of Flashtool and unpack the firmware via Flashtool to see if exist file named fw.info If exist delete him and creste Ftf sgain.Flashing via flashtool would not succed if this file exist ,so i repeat to delete him and try again.
Sent from Xperia Z5
Allek84 said:
Did you try to turn off phone and press and hold power and volume up butto to see is the phond vibrate 4 times after few seconds.
Second,try older version of Flashtool and unpack the firmware via Flashtool to see if exist file named fw.info If exist delete him and creste Ftf sgain.Flashing via flashtool would not succed if this file exist ,so i repeat to delete him and try again.
Sent from Xperia Z5
Click to expand...
Click to collapse
Thanks for the reply and helping me find a way out!
However, when the phone is off and I hold the power button and volume up noting happens at all. This combination only works if I want to shut the phone down.
And I don't think the problem is within the firmware but within the device, because you have to enter flash mode to use Flashtool and the phone won't enter flash mode (or fastboot) anymore. I can't flash anything atm.
No luck here on xda or anywhere on the internet. So I'm sending it to sony hoping they can fix it....

Categories

Resources