Database Info

[Q] xperia tipo not boot

hi all ihave an xperia tipo dual sim i installed boot.img throw flash tool then i cant open or boot to my system or to recovery any thing i cant open my tipo only 3 red light blinking and phone cant be open (boot) Please Help ME :crying::crying:
i tring to try repair my phone throw pc companion but it say you have modified softwire you cant to repair

Which boot.img did you use?
Get ftf for your phone and flash it with flashtool.
Sent from my ST27i

when that color light blink press (+)Volume key you will enter in recovery mod..... i think u have flash FXP boot image
remove battery again insert and hold (-)vol key and connect USB and flash TFT of tipo Dual
here the link http://forum.xda-developers.com/showthread.php?t=2001567

try to flash the boot.img again. to do that
start your phone and hold the power and volume button and connect your phone to your pc. [it will take too much time so keep trying] after 3-5 minutes you will see a violet/blue light then flash.
Click to expand...
Click to collapse
same thing happens to me 4 weeks ago.

help
if i have any proplems or issus i will post here please being in touch:angel::angel:

Help please !! Big problem

I unlocked my Xperia L bootloader , but after that it started to bootloop...I went to flash this : http://forum.xda-developers.com/showthread.php?t=2356876
but whenever i connect my phone to flash mode it gives me a green light then the light goes !! And I dont know what to do
Notice : I have flashtool 0.9.10 and not 0.9.11 ,, I dont think it matters..but i will give it a try to update

Sparksys said:
I unlocked my Xperia L bootloader , but after that it started to bootloop...I went to flash this : http://forum.xda-developers.com/showthread.php?t=2356876
but whenever i connect my phone to flash mode it gives me a green light then the light goes !! And I dont know what to do
Notice : I have flashtool 0.9.10 and not 0.9.11 ,, I dont think it matters..but i will give it a try to update
Click to expand...
Click to collapse
Firstly, after unlocking, it will 100% bootloop, so we must flash a stock rom.
Secondly, how to use flashtool to flash a stock is click the thunder first in flashtool, choose flashmode, choose the firmware you want, then wait for some seconds the flashtool is preparing the files, when prompted to connect via flashmode, turn off your phone and connect while hold vol down button, it will blink red then green, the green light is not holding, but wait for at least 3 seconds till the flashtool detected your phone, then it will flashing.
Thirdly, didn't you ever flashing via flashmode in Xperia L before?
Sent from my C2105 using xda app-developers app

karkand said:
Firstly, after unlocking, it will 100% bootloop, so we must flash a stock rom.
Secondly, how to use flashtool to flash a stock is click the thunder first in flashtool, choose flashmode, choose the firmware you want, then wait for some seconds the flashtool is preparing the files, when prompted to connect via flashmode, turn off your phone and connect while hold vol down button, it will blink red then green, the green light is not holding, but wait for at least 3 seconds till the flashtool detected your phone, then it will flashing.
Thirdly, didn't you ever flashing via flashmode in Xperia L before?
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
Yes , I used flashtool on my old phone Sony Ericsson Live With Walkman ..
Why I Panic : Thats because I didnt see my xperia L hold the green light so i thought that its not being able to go to flash mode .. On my old phone it used to hold the green light.... Problem Solved ..
I just thought my phone wasnt getting to flash mode because it didnt hold the green light.. Anyway I flashed a stock ROM .. Everything is working

don't just see your phone,,but see the flashtool which read accurately your phone is connected to

[Q] Restoring stock ROM & entering flashmode

Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?

1st you have to read document about flashing properly. Read twice. You must not start phone after switch off it. Just start flashtool on PC. And you have to press volume down button and insert USB cable simultaneously. Don't switch on your phone. It will led your phone into flash mode. Green light will blink once in notification light area.
Sent from my C2104 using XDA Free mobile app

zaxrider said:
Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?
Click to expand...
Click to collapse
You dont need to press power button
Just press the volume down
And plug ur data cable.thats it
Its doesnt boot(i guess you press power button)

Stuck on flalshmode
Hi,
I want to falsh stock rom on my Xperia L (Unlocked bootloader)
But while using flashtool I am stuck on flashmode. I tried removing phone holding vol down button and then connected to PC but flashtool is still showing the same window of connecting in flashmode
I have installed the ADB drivers correctly. dont know what to do next

When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.

szomjas said:
When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.
Click to expand...
Click to collapse
Tried that LED is flashing green and red but flashtool is not reading the phone

bassil.alzoubi said:
its a drivers issue u dont need the adb drivers but you need flashtool drivers so navigate to flashtool folder (c:/flashtool)
> open drives folder and install all drivers in case you want to flash another device .
if after installing the drivers still the same problem try another usb cable/port
press thanks if helped :good:
Click to expand...
Click to collapse
Tried that also still no luck....Installed drivers from C:/flashtool/drivers/.exe..... both flashboot and flashmode (both at a time and single at time also) tried to change the port and cable also(used htc cable btw) and tried in different pc also
but still no luck

Miro bricked after flashing wrong bootloader

Hi,
I don't know what can I do now, perhaps noting. I accidentialy flashed wrong bootloader (from other xperia, not Miro). Now phone seems to be completly bricked, I can't turn it on and my PC does not see any new device after connecting phone to usb. I also tried to remove and insert battery, after this when trying to power on, there is short vibration and nothing more.
Do you have any ideas? Or I simply should to use it as brick, not as phone or put it to my toilet and wash? Thanks.

Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303

Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool for Xperia devices
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck :good:

Dzepar said:
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Click to expand...
Click to collapse
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.

giaur said:
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
Click to expand...
Click to collapse
You should see green light. Try this :
Pull out battery, hold power button for 10 seconds without battery. Reinstall battery, hold volume button - and connect to usb. Then follow steps that prateek.invasion gave you.
The point is you can flash ftf and restore your phone.
Good luck.
Sent from Xperia M2 D2303

Thanks, I will try. Batteery is not charging, so I need to do this quick, it was not fully charged.

Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?

giaur said:
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
Click to expand...
Click to collapse
I had the same issue with my xperia e after I unlocked the bootloader and installed CWM, the phone just rebooted itself at boot up. If you have installed CWM I suggest you to install a custom rom and a new kernel. That worked for me . Or ofc, if you have warranty you can send it to them. They won't be able to tell if you installed another rom since the pc doesn't recognize the phone.

I don't have cwm... trying to connect to computer with volume down pressed. After this led starts flashing red and computer can't see any device connected
Seems there is no any recovery or I can't put it to recovery mode.

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone

You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this

solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.

Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck

Please tell me D6603 testpoint

bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54

john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??

mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.

Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???

mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.

i m not even able to fastboot a recovery ...tried twrp and cwm both of them...

Me too

in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|

I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?

ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck