I Tried installing Jelly Bean on my phone through recovery mode, an error occured, now it doesn't get past the boot animation. Recovery mode starts then closes and restarts normally into its bricked state. I have read the forums and tried to follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=1056847
I do exactly as it follows but the phone still tries to boot Jelly Bean.
My phone is LG P999, was Android 2.3.3 (Gingerbread). And it has a backed up rom on it. Please any help will be really appreciated .
EDIT: Solved! Thanks given to Yuvin and sagar sriram
Did you have any errors during the NVFlash steps? The G2X is pretty much unbrickable, so don't worry too much. Try the NVFlash method again and see if you can get it to work.
try this link
try this link :
http://forum.xda-developers.com/showthread.php?t=1248644
JoeArbiter said:
I Tried installing Jelly Bean on my phone through recovery mode, an error occured, now it doesn't get past the boot animation. Recovery mode starts then closes and restarts normally into its bricked state. I have read the forums and tried to follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=1056847
I do exactly as it follows but the phone still tries to boot Jelly Bean.
My phone is LG P999, was Android 2.3.3 (Gingerbread). And it has a backed up rom on it. Please any help will be really appreciated .
Click to expand...
Click to collapse
aevyrda was
sagar_sriram said:
try this link :
http://forum.xda-developers.com/showthread.php?t=1248644
Click to expand...
Click to collapse
This worked Perfectly!! Thank you!
Related
I have a sidekick 4g and I rooted it. It had firmware 2.2.1 and I tryed installing a rom and now it boots up and sits there at the bootup screen vibrating like every 4 seconds then resets and does this process over agian. I used rom manager. I am scared I just screwed my phone up... ): can someone please help me I think i bricked it. What it does is when I boot it up it stays at the first logo of the boot screen. Then restarts after a min and does it agian
hi
okay what you have to do is odin!
this will get you back to stock
reroot
then install the recovery
then reflash
make sure to chack mounts
thanks bro it fixed it!!
http://forum.xda-developers.com/showthread.php?t=1186954 - You can download the stock ROM image from here, and it has the basic steps to install it using Odin. Let us know if you need more details.
Lproxide said:
thanks bro it fixed it!!
Click to expand...
Click to collapse
no problem!
Hey guys,
Soo a friend of mine gave me his Optimus 3D cause I said I would try to fix it.
He said he did a system update and afterwards it would just boot in recovery.
So he has Clockworkmod installed so I just tried loading a new rom and flashing it via. recovery, but it does not work, still only boots in recovery.
Any Idea on how to fix this? I just have a HD2 but no Optimus 3D.
Would be very thankful for any answers.
Regards
why not try factory reset and wipe system and cache...etc from the recovery menu?
Did he update while having CMW installed? If he did he might be screwed.
You can always try to follow all steps in this thread to do an emergency flash: http://forum.xda-developers.com/showthread.php?t=1244490
bioweb said:
Did he update while having CMW installed? If he did he might be screwed.
You can always try to follow all steps in this thread to do an emergency flash: http://forum.xda-developers.com/showthread.php?t=1244490
Click to expand...
Click to collapse
I think that he did, yes.
He's one of those guys that just do stuff but dont inform themselves about it before.
bioweb said:
Did he update while having CMW installed? If he did he might be screwed.
You can always try to follow all steps in this thread to do an emergency flash: http://forum.xda-developers.com/showthread.php?t=1244490
Click to expand...
Click to collapse
Is it risky to update while CWM is installed?then how to update?
damn, the same problem again and again, everywhere!!!
Guys i m from india using atrix 2.
was trying to flash liquid kitkat rom using cwm.
it was succesfull..i rebooted and all i get is error msg
fast boot ( boot faliure)
its getting detected using rsd lite but i dnt know the exact sw version of phone for stock rom..
can u guys please suggest me what should i do
thanks
Alteredge said:
Guys i m from india using atrix 2.
was trying to flash liquid kitkat rom using cwm.
it was succesfull..i rebooted and all i get is error msg
fast boot ( boot faliure)
its getting detected using rsd lite but i dnt know the exact sw version of phone for stock rom..
can u guys please suggest me what should i do
thanks
Click to expand...
Click to collapse
Fall of Enosis said:
This happens because the flashing failed when you tried to flash the wrong firmware. When the phone boots, it runs certain system checks, and if it fails those checks, as a safe mode, it throws itself into Fastboot. It will do this because it is unsure if the phone is safe to boot.
You can boot it normally from fastboot by hitting power, (screen shuts off) hold down both volume rockers, and hit the power button. Then select boot normally.
Click to expand...
Click to collapse
If you want to get back to stock, FXZ back to one of the stock AsianRetail firmware which can be found here.
If you don't know what FXZ is, read here.
Root from here.
If for some one reason this firmware does not work for you (it didn't for me, it got stuck at lockscreen everytime the phone booted and I couldn't unlock the phone) you could use this firmware.
Root from here.
Hope it helps!
Cheers.
Thank you so much buddy
it worked!!!!
Flashed with stock rom and its working fine now
thanks so muchh!!!
I am very new to xda and this is my first post so I am not sure where I should post this.
Ok so was trying to flash TWRP(sprout) on my Cherry Mobile ONE using the instructions stated on their website but things didn't go well as planned. My phone boots straight to recovery mode but all that happens is that the TeamWin logo flashes over and over again.
I am slightly freaking out right now beacause I am afraid I may have permanently bricked my phone but I haven't lost all hope yet.:crying:
Please help me. Any reply would be greatly appreciated. Thank you
JecoG said:
I am very new to xda and this is my first post so I am not sure where I should post this.
Ok so was trying to flash TWRP(sprout) on my Cherry Mobile ONE using the instructions stated on their website but things didn't go well as planned. My phone boots straight to recovery mode but all that happens is that the TeamWin logo flashes over and over again.
I am slightly freaking out right now beacause I am afraid I may have permanently bricked my phone but I haven't lost all hope yet.:crying:
Please help me. Any reply would be greatly appreciated. Thank you
Click to expand...
Click to collapse
simple way is flash stock recovery.img and wipe user data and make a factory reset in stock recovery it will be boot fine ...
you can also refer here to bring back your device into stock factory condition
http://forum.xda-developers.com/android/general/how-to-install-stock-rom-bricked-t3126834
Adi Shakthi said:
simple way is flash stock recovery.img and wipe user data and make a factory reset in stock recovery it will be boot fine ...
you can also refer here to bring back your device into stock factory condition
http://forum.xda-developers.com/android/general/how-to-install-stock-rom-bricked-t3126834
Click to expand...
Click to collapse
Thank you very much.
I managed to intsall PhilZ in my phone and it's working fine now.
Hi everyobody:
i was trying to install a new ROM in my old and unused Infuse but a I had to stop soon for the following reason.
As described here [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included by jscott30 i succesfully returned to stock 2.3.6 Gingerbread UCLB3 but but now i have the "rainbow distortion" while rebooting that makes me impossible to use the CWM menu to install the 4.3 ROM.
As suggested I also tryied to install the GB bootloader but Odin always gives me a FAIL feedback.
Can you please help me get out of this?
Thank you
freznet said:
Can you please help me get out of this?
Thank you
Click to expand...
Click to collapse
Hi, i decided to try again. I have recovered the rainbow distortion and now i have a 2.3.6 working.
Can you please help me with a link to the next step? How can i now install red CWM to load a new ROM (4.4.2 or 4.4)?
Thanks
freznet said:
Hi, i decided to try again. I have recovered the rainbow distortion and now i have a 2.3.6 working.
Can you please help me with a link to the next step? How can i now install red CWM to load a new ROM (4.4.2 or 4.4)?
Thanks
Click to expand...
Click to collapse
You got the GB bootloader working? That would be required to use CWM, or else you will be stuck back in post one.
If sorted out, Option C would be the way to go:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
freznet said:
Hi, i decided to try again. I have recovered the rainbow distortion and now i have a 2.3.6 working.
Can you please help me with a link to the next step? How can i now install red CWM to load a new ROM (4.4.2 or 4.4)?
Thanks
Click to expand...
Click to collapse
How do you recovered the rainbow distortion? Thanks!