Related
Have any of you gotten QPST to connect to this phone?
I can get the phone to show as a modem in my device manager, but I can't get QPST to connect successfully.
If you got it to work, and can read from and write to the phone what did you do exactly?
eagercrow said:
Have any of you gotten QPST to connect to this phone?
I can get the phone to show as a modem in my device manager, but I can't get QPST to connect successfully.
If you got it to work, and can read from and write to the phone what did you do exactly?
Click to expand...
Click to collapse
QPST is for CDMA phones. It lets you provision the phone. Its the main tool i used to flash verizon and sprint phones to MetroPCS back in the day.
I was wondering if it was CDMA only. I searched google but couldn't really find an answer.
eagercrow said:
I was wondering if it was CDMA only. I searched google but couldn't really find an answer.
Click to expand...
Click to collapse
yes its CDMA only.
I want to unlock LTE bands on My new G920V and try operations like I did on HTC M8 VZW. When I dial ##366633# to enable DM MODE and plug the cable a tip floated showing 'Unknown Device'. I have install newest Samsung mobile driver but I doesn't work. Does any one know how to connect G920V to QPST?
Help
I've the same problem with my Galaxy S6, android 5.0.2
http://forum.xda-developers.com/showthread.php?t=3109579
Here you go try looking around first.
wwonka69 said:
http://forum.xda-developers.com/showthread.php?t=3109579
Here you go try looking around first.
Click to expand...
Click to collapse
Thanks for you advice. I will try.
no help yet
wwonka69 said:
http://forum.xda-developers.com/showthread.php?t=3109579
Here you go try looking around first.
Click to expand...
Click to collapse
it's not what i wanted , i'm trying to open diagnostic usb port for cdma tool
hackerx1001 said:
it's not what i wanted , i'm trying to open diagnostic usb port for cdma tool
Click to expand...
Click to collapse
let us know how it goes, I'm sure a lot more people will be intereseted as time goes by...i'd like to unlock mine as well
edit:
do you have a link with instructions? the "enable dm mode" works on my verizon s4 , and I'd like to try it
SDRebel said:
let us know how it goes, I'm sure a lot more people will be intereseted as time goes by...i'd like to unlock mine as well
edit:
do you have a link with instructions? the "enable dm mode" works on my verizon s4 , and I'd like to try it
Click to expand...
Click to collapse
i'm still trying to figure it out BUT no luck yet
I managed to fix it myself
hackerx1001 said:
I managed to fix it myself
Click to expand...
Click to collapse
would you mind telling us how you did it? I'm trying to enable dm mode for g920v too.
Thank you
I've been trying to unlock LTE Band 3 for a while now.
You can forget about using QPST, since this tool is for Qualcomm processors. Our S6's have an Exynos soc.
@hackerx1001, I'd like to know how you managed to get your phone to work in DM Mode.
Also, was CDMA Workshop working ?
Thanks
nictgee said:
I've been trying to unlock LTE Band 3 for a while now.
You can forget about using QPST, since this tool is for Qualcomm processors. Our S6's have an Exynos soc.
@hackerx1001, I'd like to know how you managed to get your phone to work in DM Mode.
Also, was CDMA Workshop working ?
Thanks
Click to expand...
Click to collapse
Soc is Exynos but modem may be from Qualcomm. I believe Qualcomm holds some patents for the use CDMA and Samsung may have used modem from Qualcomm for the Verizon variant.
since QXDM appears in Service mode, modem may be from Qualcomm.
Help
hackerx1001 said:
I managed to fix it myself
Click to expand...
Click to collapse
Having same problem you were having, would you mind posting here how you fixed it?
seven31 said:
Soc is Exynos but modem may be from Qualcomm. I believe Qualcomm holds some patents for the use CDMA and Samsung may have used modem from Qualcomm for the Verizon variant.
since QXDM appears in Service mode, modem may be from Qualcomm.
Click to expand...
Click to collapse
You are entirely right, the modem is from Qualcomm, and we will be able to use QPST...once we get the DM Mode working.
There is another thread talking about this: http://forum.xda-developers.com/verizon-galaxy-s6/help/dmmode-t3105630
It seems @hackerx1001 managed to enable DM port.
@lostvangel said He managed to unlock LTE band 3 for GSM/LTE network. It would be great if they could share their knowledge. Many users are still trying to figure it out.
Verizon S6, has no DMMODE??
##366633# does work and has the option to enable, but PC does not recognize the device, any1 else having the same problem?
any ideas how to enable Diag mode on S6?
Having the same issue. Device Manager doesn't recognize the device. It shows up as "Unknown USB Device (Configuration Descriptor Request Failed)."
I tried installing the latest Samsung drivers but that didn't help. Did you have any luck in connecting this?
ryu_gian said:
Verizon S6, has no DMMODE??
##366633# does work and has the option to enable, but PC does not recognize the device, any1 else having the same problem?
any ideas how to enable Diag mode on S6?
Click to expand...
Click to collapse
my one is Verizon S6 edga ,it have same problem,"Unknown USB Device" any one give help?
same problem
i'm having the same problem
I think VZW ask Samsung to lock the DM port. All G920V have the same problem.
lostvangel said:
I think VZW ask Samsung to lock the DM port. All G920V have the same problem.
Click to expand...
Click to collapse
Do you know if this is just VZW ? Would Sprint S6 have the same issue (I believe Sprint model also has QCOM modem - please correct me if I'm wrong)
i'm having the same problem
fawzisaeed said:
i'm having the same problem
Click to expand...
Click to collapse
Just to clarify, do you mean to say you are having the same problem with a Sprint phone?
no same problem in verizon g920v
sprint
sprint ones ##3424# WORK (Samsung Galaxy S6 SM-G920P), fully working, only thing with those models getting the SPC is a pain.
these verizon ones, well clearly we are missing something. ##366633# / ##DMMODE#, a hidden menu a key sequence any thoughts? nothing on the recovery menu to help either.
back to the drawing broad start fresh... any new mode discovered for Verizon S6?
ryu_gian said:
sprint ones ##3424# WORK (Samsung Galaxy S6 SM-G920P), fully working, only thing with those models getting the SPC is a pain.
these verizon ones, well clearly we are missing something. ##366633# / ##DMMODE#, a hidden menu a key sequence any thoughts? nothing on the recovery menu to help either.
back to the drawing broad start fresh... any new mode discovered for Verizon S6?
Click to expand...
Click to collapse
You mean to say that you've gotten it to connect to your PC properly? As in the USB device shows. Can you tell me what it looks like in Device Manager? What is the Hardware ID in the device properties? Mine is all screwed up, so the only place I could even see a VID or PID is in the device instance Path, as shown in the attached image.
shepherd17 said:
You mean to say that you've gotten it to connect to your PC properly? As in the USB device shows. Can you tell me what it looks like in Device Manager? What is the Hardware ID in the device properties? Mine is all screwed up, so the only place I could even see a VID or PID is in the device instance Path, as shown in the attached image.
Click to expand...
Click to collapse
we all have the same problem, Unknown USB for Verizon Models ONLY.
ryu_gian said:
we all have the same problem, Unknown USB for Verizon Models ONLY.
Click to expand...
Click to collapse
Do you have a Sprint S6 handy? If you don't mind, can you post the output of the command
ls -l /dev
I am curious if there are any extra or different devices than on Verizon model.
shepherd17 said:
Do you have a Sprint S6 handy? If you don't mind, can you post the output of the command
ls -l /dev
I am curious if there are any extra or different devices than on Verizon model.
Click to expand...
Click to collapse
nope none, had one last week but sold it. (needed cash)
ls -l /dev Sprint G925P DIAG mode on and Working
hi!
did you find the solution with your S6 verizon? I mean the problem with "configuration descriptor request failed"
thanks!
---------- Post added at 11:39 AM ---------- Previous post was at 11:30 AM ----------
shepherd17 said:
Do you have a Sprint S6 handy? If you don't mind, can you post the output of the command
ls -l /dev
I am curious if there are any extra or different devices than on Verizon model.
Click to expand...
Click to collapse
hey!
did you find solution?
Thanks!
No, I never found a solution. Still interested in case anyone has any ideas.
any one got the solution for Version S6 diag mode? i tried a lot with OC3 and OE2 baseband but no luck.
Diag Mode working ......
finally i got the success. Diag mode working and done the CDMA Flashing VIa DFS . now CDMA data working on Verizon GS6 G920V.
Excellent news!
Can you explain how you got DMMODE to work ?
Cheers
Hi
Sorry for my English, not my native.
I know that there is few thread with this error.
My problem is that:
This is not my phone, friend of mine bought it probably from china, looks like EU version.
Anyway phone worked just fine until they turned it off and now they can't boot it cuz of this error.
Setting it to DL mode, and smartswitch can't recognize phone, also when I try to run emergency recover, soft ask me for code which I don't know.
Here is what messages I get on phone:
https://imgur.com/a/l4vZA
Even If I wanted to download firmware, I have no idea which one should I DL.
As I can see android 7.0 is available but still, which one?
I don't have box from this phone to recognize it maybe via S/N number.
This friend probably give it to me later this day, just asking what can I do to fix this phone.
Thank you for any reply.
Flash any G930F firmware to it
TCL (Portugal) seems to be installed atm
Likely scenario, it was rooted, then OEM unlock was disabled, after reboot it FRP locked
Flash stock to fix is usually the way to repair this
can I install 7.0 from here: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/
Poland carrier? or should I start with 6.0.1?
Maybe you can restore your phone via samsung smart switch?
012512 said:
Maybe you can restore your phone via samsung smart switch?
Click to expand...
Click to collapse
When I connect phone to PC with DL mode on, smartswitch can't recognize phone.
I tried to run emergency recovery but it ask me for code from previous PC? don't know what is it and how to get it.
Interceptor1910 said:
can I install 7.0 from here: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/
Poland carrier? or should I start with 6.0.1?
Click to expand...
Click to collapse
Like I said, "ANY" G930F stock firmware
They are full firmwares, why start with an old one?
Interceptor1910 said:
When I connect phone to PC with DL mode on, smartswitch can't recognize phone.
I tried to run emergency recovery but it ask me for code from previous PC? don't know what is it and how to get it.
Click to expand...
Click to collapse
The code is the serial of your phone. Otherwise if that doesnt work then downgrade the phone on the latest MM and do bypassing.
Interceptor1910 said:
When I connect phone to PC with DL mode on, smartswitch can't recognize phone.
I tried to run emergency recovery but it ask me for code from previous PC? don't know what is it and how to get it.
Click to expand...
Click to collapse
Serial number should be written on the back of the phone
012512 said:
The code is the serial of your phone. Otherwise if that doesnt work then downgrade the phone on the latest MM and do bypassing.
Click to expand...
Click to collapse
s/n at the back of the phone? next to imei? cuz I tried it and no go "no matching recovery code found"
Also, this website with firmware, I need premium to DL it with decen't speed.
Any other website I can download stock 7.0 for S7?
Case closed
Thx for help, android 7.0 is working atm.
Looks like phone is alive again.
Hi there,
Cutting to the chase.
Australian, use Vodafone AU when at home, but working in the Philippines a lot this year (Smart Philippines), plus travel often to Taiwan.
Need VoLTE for VF AU, would love it for Taiwan (TW Mobile), dont think Smart offers it at all in PH YET, but if and when, would also be great, but less critical.
Currently have a Pixel 3 XL from VF AU, so thats sorted.
Wondering, if I get a Oneplus 7 P, what is likely to be needed to make it work?
Previously had to run custom ROMS on previous HTCs to get non native network support for VoLTE, even then it required the ROM cooker to code it in.
Please educate me!
There was a way to force enable Volte on my OP6
I'm pretty sure the process would be the same
I'll link it when I get behind my pc
thanks, look forward to your link.
virtyx said:
There was a way to force enable Volte on my OP6
I'm pretty sure the process would be the same
I'll link it when I get behind my pc
Click to expand...
Click to collapse
nope the option isn't there any more
we cut do it on op6 bye enter *#800#
in dailer
an FYI dont touch anything in there unless u know what u are doing
Same .. was working fine on 6t... Don't get.. why is it disabled
-fluffy- said:
nope the option isn't there any more
we cut do it on op6 bye enter *#800#
in dailer
an FYI dont touch anything in there unless u know what u are doing
Click to expand...
Click to collapse
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
virtyx said:
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
Click to expand...
Click to collapse
no thats factory mode
virtyx said:
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
Click to expand...
Click to collapse
problem is
it's not there anymore
-fluffy- said:
problem is
it's not there anymore
Click to expand...
Click to collapse
there must be a way to enable serial and full-port switch (also the VOLTE switch similar to *#800#)
im pretty sure its a qualcomm / factory mode settings, it must have moved somewhere else.
i cant image oneplus getting rid of it all together.
whats TP debug?
ive sent an email to OP hopefully they can get back with an answer.
i know my pixel3xl enters a qualcom mode when i press the volume up button and have it plugged to my PC (from power off - hold down volume up and plug into PC)
maybe its similar?
virtyx said:
there must be a way to enable serial and full-port switch (also the VOLTE switch similar to *#800#)
im pretty sure its a qualcomm / factory mode settings, it must have moved somewhere else.
i cant image oneplus getting rid of it all together.
whats TP debug?
ive sent an email to OP hopefully they can get back with an answer.
i know my pixel3xl enters a qualcom mode when i press the volume up button and have it plugged to my PC (from power off - hold down volume up and plug into PC)
maybe its similar?
Click to expand...
Click to collapse
U can enable serial and full port switch... What can we do then if that's enabled?
misiokicio said:
U can enable serial and full port switch... What can we do then if that's enabled?
Click to expand...
Click to collapse
How do you get to the switch to turn them on?
I used this on my OP6
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
virtyx said:
How do you get to the switch to turn them on?
I used this on my OP6
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
Click to expand...
Click to collapse
But let's say i use this guide...still says u need to enable the volte and wifi calling swiches by going into *#800# in logkit .. but unfortunately op7 pro does not have these option to enable em in the logkit ? So what's gonna happen if u do all that pc connection without using logkit?
misiokicio said:
But let's say i use this guide...still says u need to enable the volte and wifi calling swiches by going into *#800# in logkit .. but unfortunately op7 pro does not have these option to enable em in the logkit ? So what's gonna happen if u do all that pc connection without using logkit?
Click to expand...
Click to collapse
Itay just enable the switches anyway
virtyx said:
Itay just enable the switches anyway
Click to expand...
Click to collapse
So is it safe to follow that guide? Not rooted so i cant backup efs
misiokicio said:
So is it safe to follow that guide? Not rooted so i cant backup efs
Click to expand...
Click to collapse
you could wait for the MSM tool to be released
if you break something you can always use the MSM tool to repair EFS
pretty sure you can create a backup of efs using fastboot (i dont know exactly how)
I have VOLTE just popped sim card in and it showed up. Didn't have to do anything. 12gb unlocked version on ATT.
Qualcomm drivers don't seem to work with the 7. Can't find the device in PDC after enabling serial & full-port switch.
I noticed compared to the 6, that VoLTE and VoWiFi works for one of my carrier (Vodafone NL) out of the box. The trick that I did on my 6 also made VoLTE work for my other carrier (KPN NL) which doesn't work with the 7 pro out of the box.
borijess said:
I have VOLTE just popped sim card in and it showed up. Didn't have to do anything. 12gb unlocked version on ATT.
Click to expand...
Click to collapse
Out of curiosity, what was your phone before? Mine is due for delivery today, I have ATT and my phone before is a 6T. Just wondering because I want to make sure I still have VoLTE. Thanks!
xByt3z said:
Qualcomm drivers don't seem to work with the 7. Can't find the device in PDC after enabling serial & full-port switch.
I noticed compared to the 6, that VoLTE and VoWiFi works for one of my carrier (Vodafone NL) out of the box. The trick that I did on my 6 also made VoLTE work for my other carrier (KPN NL) which doesn't work with the 7 pro out of the box.
Click to expand...
Click to collapse
did you open as admin? i dont see why it wouldnt work
did you connect phone then open the PDC software?
perhaps we need an updated PDC/QPST tool?
Qualcomm drivers: https://qc2.androidfilehost.com/dl/...4074/QUD.WIN.1.1+Installer-10037.3+Setup.zip?
QPST: https://qpsttool.com/qpst-tool-v2-7-474
try these. they look like the latest versions.
perhaps try a different USB port also.
if this doesnt work, we might have to try and get in touch with the OP and see if they know of any way to get it working.
i dont have my 7Pro yet to try this.
I tried with 2 different computers and I have those exact versions you linked installed.
Yes, I opened as admin.
Yes, I connected the phone first then opened the software. I tried reconnecting with the software open too but also, no luck.
I tried searching for a driver in Device Manager manually by browsing to both the Qualcomm and OnePlus folders.