Hey, my name is davis. I recently bought an htc one x used. Screen got shattered and decided to buy the whole LCD+Digitizer package. I got the right one OEM original. I installed everything but when i turn on the phone, no screen display or touch! the phone charges, starts, vibrates, sounds, locks and unlocks but i cant get the lcd or touch to work. i've checked every single connection for about 5 times and is all good. Any help?
Anyone?
Related
Hi.
I dropped my HTC Sensation. Screen crashed. Phone worked properly. I bought screen on ebay and replaced it. Seemed easy, but in the end my screen stays black. Phone rings, I just cannot unlock it to talk. Any ideas?
Thanks
So i purchased a LCD/digitizer from eBay and received it in the mail this morning. I followed the steps and was able to get my cracked screen (digitzer&lcd) off. After assembling it all with the new screen i ran into an issue.
There is no response from the screen at all it is just black. The phone boots fine though because it vibrated and then a few minutes later i can hear my notifications go off and the led is flashing.
could it be a bad connection with the wires, if so what one should I look at, Did i buy a faulty screen, or am i just sol?
is there any difference between a One X and a One XL screen?
any help is appreciated.
purchased from here: http://www.ebay.com/itm/271006361868?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_2923wt_1218
Could be bad connection..there is a YouTube vid on replacing it..
Sent from my HTC One X using XDA
yea that is what i am assuming since nothing was working but i just wanted to see if anyone else ran into this issue :/
I've successfully replaced the lcd/digitizer on my htc one xl, and gonna be doing another one soon. Make sure the connections are fully clamped in place. the top connection closest to the htc/at&t logo on the screen controls the touch, while the bottom connection controls the picture. So just see if the bottom connection is damaged or maybe out of place. If nothing is wrong with them then you may have a faulty screen. I suggest always testing the screen before actually putting everything in place with the adhesives, so just connect it first and if it works then you can reassemble everything.. I'm not too sure whether there is any difference with the htc one x and one xl screen. As far as I know they should be very similar. But I would definitely stay on the safe side and get only the screen that is made for your device. I have not attempted using one with the other.
i just replaced my cracked screen, put my phone all together and it was working perfect for about 10 minutes. now the touch screen will not respond. i can turn the screen on and off but i can not use the touch to unlock it. what could it be?
Reboot or wipe cache could help
Send with a homebuttonbug
Could be the digitizer has stopped working?
--------------
If you are new to xda please watch this video it'll help you out )
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
k2worldwweapon said:
i just replaced my cracked screen, put my phone all together and it was working perfect for about 10 minutes. now the touch screen will not respond. i can turn the screen on and off but i can not use the touch to unlock it. what could it be?
Click to expand...
Click to collapse
I've had al similar problem with my htc sensation. Turned out not all components work together nicely. I replaced it with a LCD / digitizer bundle and then it worked fine. A repair guy I talked to confirmed the issue and told me he only replaced them in pairs because of this issue. It still doesn't make a while lot of sense to me but searching round the internet seems to confirm this, at least for sensation.
Sent from my HTC One S using xda premium
For Sensation maybe, but here it's a sandwich type screen (glass+digitizer+display), no option for separate replace.
Best thing we can suggest is to re-connect all wires.
P.S. Where did you get the new screen? Could be a non-genuine screen...
I had a faulty digitizer/lcd display and replaced both yesterday. When I first booted up the phone, I was disappointed because I couldn't even unlock the phone. After a few swipes, it unlocked and I checked if my touch screen problems went away. It looked like they did, but every time I tried to unlock my phone, it would still take multiple tries for it to recognize my touch. Very annoying, especially if I get a call. By the time I would get it to recognize my touch the caller would be sent to voicemail, so I tried different lock types but they all had the same problem. The simple solution was to disable the lock screen altogether, but I didn't want my screen to accidentally keep turning on while it's in my pocket so I tried a different rom after backing up. After multiple attempts to install a different rom, I had to use the TMOUS RUU and get back to stock 4.0.3. I'm still having the same problem. I'm pretty sure it's nothing having to do with the digitizer/lcd since they are both brand new and all parts of the screen are responsive once I get past the unlock screen. Anyone else have this problem, and any solutions besides disabling the unlock screen?
where did u get the digitizer/lcd from i had that issue to when i bought a cheap digitiezer with lcd screen from ebay it was low quality.So i ended with buying another one and it worked with that one without issues did u check all connections ? that might be a problem or do u got a screen protector on it i heard about a lot of problems with them too
I don't wan't to discourage you, but when you change displays it's never the same as the original. You've didn't note, if you bought an original HTC Sensation display, but I doubt that it is. Anyway, the problem should be with the micro flat cable connection. I've had the same problem replacing my screen on Samsung Galaxy Ace. You should give it to someone that can try and connect the flat again, but really, don't get your hopes up.
dennis8 said:
where did u get the digitizer/lcd from i had that issue to when i bought a cheap digitiezer with lcd screen from ebay it was low quality.So i ended with buying another one and it worked with that one without issues did u check all connections ? that might be a problem or do u got a screen protector on it i heard about a lot of problems with them too
Click to expand...
Click to collapse
I got it from ebay, it's the one with the HTC logo in the middle and no T-Mobile logo, supposedly brand new and never used except to test if it works. I'll try re-installing it and see if that fixes it.
hey
here try this that might help
just found it and thought about that i answered u yesterday if thatll work i could saved my money hahahahaha might help u to save ur money
http://forum.xda-developers.com/showthread.php?t=1360638
Hi guys I'm new here.
So here's the problem. My One S z560e dropped of my pocket on the floor. Landed on screen. Screen is broken and on the surface of the screen i can't feel cracked screen just see under there are cracks in left corner of screen. I cant turn on phone, when plugged in orange led is on like is charging. When charging it gets very hot not as usual charging when phone was working. Everything is stock. I have z560e version. I am sure that screen and digitizer are broken but why i cant turn it on? Motherboard maybe?
Thanks for reply's :laugh:
the best thing to do is to take it to hTC
I think u should sell your htc one s ebay as broken and the buy a new one
sent to htc...screen and motherboard were dead...lost some of data backup succesfully worked for me
thanks guys