Switch Off Your Device & Connect It To The Computer Using USB Cable While Enabling Fast Boot Mode (Press & Hold Volume Up Button To Trigger Fastboot Mode). Windows Will Start Driver Installation As soon As You’ll Connect Your Device To The Computer While Keeping It In Fastboot Mode.
When I get that part I get into fastboot, there is about 5 seconds and then immediately goes out, someone help me please
Related
hi everyone;
i tried to flash my sony xperia p but i don't know what happend my phone turned into a black box even it is not showing any sign of getting power on it is even not recognizing any device only when it connects to pc it just making a sound of pop up but no sign of any blinking or continue light of any colour is there any solution for this mi developer mode was turned on when i tried to flash it
even i didn't press any key on my phoone when it connected to pc then my pc making a sond of pop up that's what happening
can you get into the flash mode or fastboot mode ?
flash mode ( press volume down then connect the usb cable to your pc)
fastboot mode ( press volume up then connect the usb cable to your pc)
It's almost to easy, but maybe this help others too:
turn the device off - plug in the USB-cable wile holding down the volume button – that's it, the device will start in fastboot mode.
I dropped my Moto G – annoyingly only a few months after I'd replaced the battery. Now it won't boot up.
If I plug it into a charger, the 'battery charged' icon flashes on and off alternately with the LED light.
If I connect it to my Windows 10 PC, I repeatedly get the notification message "USB device not recognized: The last USB device you connected to the computer malfunctioned and Windows does not recognize it."
If I press Volume Down when the phone is connected to the charger, it will enter the Fastboot Flash Mode screen, but if I select Recovery or Normal Powerup nothing happens – it just goes back to the flashing 'battery charged' icon. I haven't tried the other options.
If I press Volume Down when the phone is connected to the PC, it enters the Fastboot Flash Mode screen, and this time there are no Windows USB errors. From a command prompt, fastboot devices recognizes the Moto G. So I think there may be hope!
How should I proceed from here? I can use fastboot but not adb. I'd be very grateful for any help.
I want to root my phone with Magisk, so, following the instructions here:
I enabled OEM unlocking on my SM-A516B (European, not US or Canada and it's running the latest offical software (Android 12)) and rebooted to download mode via adb (goes to a "fastboot" mode when I select bootloader mode from recovery mode), but I don't see any option to unlock the bootloader. The English text on the screen says only:
Code:
Downloading...
Do not turn off target
Do not disconnect the USB cable during the software update!
Volume Down Key + Side key for more than 7 secs
:Cancel (restart phone)
There is also some Korean text, a DID code and a barcode. Holding volume up does nothing.
I'd seriously appreciate any ideas on how to proceed!
So I found the solution for myself: I don't want to go to the download mode, but instead hold valume + and - and plug in a USB cable.
I have a Samsung A51 with MDM lock & passcode lock. Andriod Version 10.
Device cannot enter download mode, cannot reboot to bootloader, cannot factory reset also.
How do I remove the MDM lock on this device, or is there a way I can force this device to download mode?
To force download mode:
Power device off completely with no cables connected
Plug a USB cable into your PC, do not yet connect your phone
Hold both Volume + and - buttons, do NOT press Power, and while holding them plug in the USB cable
Device should start with a prompt, follow the instructions to enter download mode