Related
Until about 3 days ago the sound on my phone worked perfectly, I have installed dutty's rom for about 1 month ago. On friday or something the sound simply dissapaired from the phone, and now I am only able to hear sounds through headphones/earplugs.
I have discovered that if i press the wheel on the side inwards, the sound returns as long as I am holding my finger there. What is causing this, and how can i possibly fix it?
I can't anylonger hear when the phone is ringing or anytthing
What radio are you using? Try updating your radio and reading the wiki.
http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser
Problem: I have no sound.
Solution: You need to install a Windows Mobile 6.1 radio.
Click to expand...
Click to collapse
List of Kaiser radios:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
From what I get he didn't flash anything new or change anything? I would try a hard reset and see if that fixes it if not flash a new ROM and Radio that is known to work and if that doesn't work trade it for a refurb from your provider.
I just tried both hard-reset and installing a new rom. It is not working as I have seen yet. I don't think its a hardware error because i have never lost the phone on ground yet, and it has never been in contact with water. I have also tried to reset the software, but nothing helps
I also can't remember installing a software or making any changes other then gps fix previously before the problems started occuring. Might it be possible that somehow a change or something somewhere have made my phone uncompitable with the current radios?
As I said previously, I get trough the headphone. the odd thing is that i get the sound on the phone back if i press the scrollwheel inward a bit hard. I think there is a registry error or something somewhere.
Though this is very annoying because I can't hear when the phone is ringing. The phone is too big to be in my pocket, and then i need to keep it in my jacket.
I would be grateful if anyone could provide a solution to this-
though i have read through the wiki, and I find it strange that a rom and radio that previously were working, suddenly stops working.
amik5 said:
though i have read through the wiki, and I find it strange that a rom and radio that previously were working, suddenly stops working.
Click to expand...
Click to collapse
I fully agree. I have the same problem with all Dutty's ROM. Once I pair the bluetooth device the first time and have it connected, from then on the sound goes to bluetooth headset. Thus, I miss calls if I am not wearing my bluetooth headset 24/7.
When the bluetooth headset is disconnected, still there is no sound from the phone. Again, I miss calls.
The Radio which I use with Dutty's ROM is alway included in the ROM.
Maybe, some registry settings?
KOR!
But the strange thing here is that the sound worked perfectly until some days ago, but maybe i should try to just reset the whole phone back to its original setting, and then reinstall everything?
I think its just annoying that something like this occurs when the phone is working perfectly.
Though i don't need to wear headsets when i am talking in the phone; the inbound speakers are working as they are supposed to
Ok, i have tried every radio possible now, and none of them works
amik5 said:
Ok, i have tried every radio possible now, and none of them works
Click to expand...
Click to collapse
Try to install a different ROM which has built in Radio with the ROM. Such as this:
http://forum.xda-developers.com/showthread.php?t=381837
Hope this is helpful.
KOR!
flash it to original radio and rom, if it still does not work i think it's time to get that replaced. you may have to warranty it.
How do I do that? If there is any help, I have 2 other htc kaisers at home if there is possible to retrieve anything from them
amik5 said:
How do I do that? If there is any help, I have 2 other htc kaisers at home if there is possible to retrieve anything from them
Click to expand...
Click to collapse
Just flash some other ROM and see what happens. Either flash the ROM from the link I have given or flash the original ROM.
Spend half an hour and you will know if it is software or hardware problem.
The easy way is to download the ROM from the link given above and let us know the results!
KOR!
Same problem here. I noticed that it only happens after pairing it with bluetooth. I was on the ROM for a month before i pair it with bluetooth and then voila ... no sound.
However, my problem can be temporarily solve by resetting the phone. I was about to flash to the latest Dutty's and see how...
amik5 said:
Until about 3 days ago the sound on my phone worked perfectly, I have installed dutty's rom for about 1 month ago. On friday or something the sound simply dissapaired from the phone, and now I am only able to hear sounds through headphones/earplugs.
I have discovered that if i press the wheel on the side inwards, the sound returns as long as I am holding my finger there. What is causing this, and how can i possibly fix it?
Click to expand...
Click to collapse
You should have made this post in the thread of the ROM you're using!
You don't have a signature so we don't know what the @#$% you have on your phone.
It's not like Dutty only has 1 ROM out.
There's several individuals who go thru Dutty's threads & help individuals like yourself.
So, if you post there....you will get the help you need.
Moderators.....please close this useless thread !
Leechoonhwee said:
Same problem here. I noticed that it only happens after pairing it with bluetooth. I was on the ROM for a month before i pair it with bluetooth and then voila ... no sound.
However, my problem can be temporarily solve by resetting the phone. I was about to flash to the latest Dutty's and see how...
Click to expand...
Click to collapse
Has anyone tried reinstalling the BT then.
Leechoonhwee said:
Same problem here. I noticed that it only happens after pairing it with bluetooth. I was on the ROM for a month before i pair it with bluetooth and then voila ... no sound.
However, my problem can be temporarily solve by resetting the phone. I was about to flash to the latest Dutty's and see how...
Click to expand...
Click to collapse
Just tried Dutty's April 1 (no April fool) ROM and it doesn't have the above problem. Here is the link for it:
http://forum.xda-developers.com/showthread.php?t=380991
KOR!
In the future, please reply to an existing thread when reporting problems. Please do not create new threads.
If you're not sure why this thread was closed, see the forum rules or watch this video.
Resetting the Rom
I have a phone where the hardware is malfunctioning, and i want to send the phone back for repair. The only problem is reinstalling the previous OS.
I had originally a norwegian OS (1.56.409.8711). I do have acess to another kaiser with the OS i want, so is there anyway to retrieve it from the phone?
FYI, there is an issue with pretty much all ICS ROMs and the BT stack included in them. I have a brand new, top of the line Jawbone BT that supports everything, works flawlessly in Cyanogen and non-ICS ROMs, but will barely work in ICS.
Basically, after a reboot, it connects and says Connected (no media), then switches to Connected. Everything works fine until I disconnect and reconnect again.
After that, it will work for only voice calls. Media will always go out the speaker. I have tried everything to fix it to no avail. The only resolution to get A2DP media streaming back is to reboot.
When it happens, the media checkbox is still there and checked, but it doesn't work. I switched back to HyperSensation (Cyanogen) and everything works as it is supposed to.
Apparently ICS bluetooth works fine for some BT headsets and not others. This also seems to be an ongoing problem for other phones as well, even non-ICS.
I am not well versed in reading the debug logs, but if anyone is interested I can post them here, provided they tell me which ones they want.
I'm having troubles to. My problem is I cannot start a call via the Bluetooth Dial button on my radio. It's as if the phone doesn't even recognize that you are pressing the button. Tried installing Vlingo, but the prompt doesn't even work anymore.
The old solution was to install the Voice_dialer.apk...but that doesn't seem to be compat either
I can confirm the issue with the virtuous ICS as well. I have bt stuff from Jawbones to BlueAnt's and all have the same issue. Prior to this was the issue of cutting out and now it's the off/on bt streaming. To "fix" the issue, is to reboot. Annoying yes. But ICS is still so sexy
I've got the same problem, ROM Elegancia ICS 1.0.6 and 1.1.0
After pairing with bluetooth headset, first time I play music everything is ok. after re-connecting, music controls works ok, but sound is thru phone's speakear not thru the headset.
After rebooting the phone the situation is the same- first connection everythings ok, another ones not.
Checked with SE MW600, Jabra extreme and car's bluetooth.
The problem occurs even with clear installation (before I restore backups).
Still can not find solution so I got back to GB.
So its not just me! I can confirm that my Beats Wireless acts exactly like described.. And with a reboot fixing it again!
I think the devs here might be able to fix it, but its properly not going to be an importent issue to fix.. Fingers crossed for a fix, or maybe the future leaks will have it done!
Sendt fra min HTC Sensation Z710e med Tapatalk
ftblstr2319 said:
I'm having troubles to. My problem is I cannot start a call via the Bluetooth Dial button on my radio. It's as if the phone doesn't even recognize that you are pressing the button. Tried installing Vlingo, but the prompt doesn't even work anymore.
The old solution was to install the Voice_dialer.apk...but that doesn't seem to be compat either
Click to expand...
Click to collapse
Vlingo has always been problematic for me... My solution (worked on ICS too) was to get it working on an older ROM (not sure which one anymore) then use titanium backup and back up APP+DATA on a ROM that it is working on. Then, restore APP+DATA on the new ROM.
The first time you hit the button on your headset it will ask you what app you want to use for voice dialing and give you Vlingo, Vlingo InCar, or Voice Search. Choose Vlingo and check the box to make it default and you are good to go.
Just make sure after you get it working on the new ROM to back it up again... then the next time you switch ROMs, restore whatever the latest backup is. I am not sure what it changes, but I have been through Cyanogen, all of the ARHD versions, all of the InsertCoin versions, and a few others (I can never make up my mind on ROMs) and this trick has worked in all of them.
IMPORTANT: Make sure in Titanium Backup to uncheck the option to restore system libraries in ROM (that can cause issues going between major versions of android), and make sure toenable the features in Titanium Backup for attempting to migrate data.
I also get the same issue when I try to connect my MW-600 with ARHD ICS 6.0.2.
Can anyone help?
You guys who just have to reboot your phone are getting off easy. When I lose Audio Streaming to my car head unit, I have to delete the device and re-pair it to my phone after a reboot.
Same here with mw600 on virtuous Inquisition 2.0.1. Only first connection plays music through headset.
I am sure that first 4.0.1 beta base was not affected. This bug came with 4.0.3
Sent from my HTC Sensation using Tapatalk
dante-fu said:
Same here with mw600 on virtuous Inquisition 2.0.1. Only first connection plays music through headset.
I am sure that first 4.0.1 beta base was not affected. This bug came with 4.0.3
Sent from my HTC Sensation using Tapatalk
Click to expand...
Click to collapse
really??.. Im gonna try an old backup then.
Edit:
Backup was removed sadly.. :/ cant test it, but maybe someone else can?
Well, the ROMs are still there to download
With 4.0.1 I was on radio version 10.59. I am not expert on radios and RILs but I guess these things affect also BT performance. Right?
Sent from my HTC Sensation using Tapatalk
Shidapu said:
really??.. Im gonna try an old backup then.
Edit:
Backup was removed sadly.. :/ cant test it, but maybe someone else can?
Click to expand...
Click to collapse
I reverted back to the virtuous 4.0.1 build from the most recent (having the new fw and radio) and has fixed the Bluetooth issue. Now I just have to live with messed up signal bars and a browser that randomly exits.
Sent from my HTC Sensation using xda premium
Hi,
Reporting this BT issue for me (SGS 2 with ICS 4.0.3, XXLP2 that can be found on XDA, originally from samfirmware):
I try to send files from my laptop to my SGS 2, 1 at a time and the transfer will suddendly halt some of the way through and ICS looks like it's rebooting but it's actually not, I mean not a full proper reboot; the phone does not switch off, the boot anim plays as if restarting, first BT is off then the icon come up in the top bar...
Hopefully, the Simple & Clean, ICS version, is round the corner ;o)
beng
using arhd 6.1.1 here on sensation XE with SE mw600 headset, no issues, calls and media working as normal
BT connectivity seems to be fixed in the latest leaked ICS + Sense RUU.
Is the sensation supposed to support any other remote control features than pause and play over BT?
I can confirm that on my Galaxy s2 using the 'official' ICS rom released yesterday still causes my phone to reboot.
This happens when bluetooth is paired with my car stereo and streaming audio or voice calls. It causes a reboot, usually happens after 10-15 minutes.
Never happened on gingerbread of any version. And has happened on all versions of ICS leading up to 'official' release.
I can confirm that bluetooth will cut off and be off completely quite randomly while listening to music or Pandora.
Only a reboot gets bluetooth to turn back on.
I have experienced this on two Motorola S9-HD headsets on various ICS roms
Sent from my HTC Sensation Z710e using Tapatalk
I'm one of the unlucky few who can't get Bluetooth to work with UCLD2 leak ICS.
It doesn't affect everyone. Just some folks.
It crashes for me and I've tried three different ROM's.
UCALC4 doesn't have the problem with bluetooth for me.
Just wondering if anyone out there has come up with a fix for it, or if you have found any custom ROM's that don't have the problem?
Please don't say CM9 because it's using the older Bluetooth code from Gingerbread (IMO) and has a couple other issues that aren't working out for me. Great ROM otherwise though.
CZ, u tried sky ics ucld2 base with the different cwm flashable Bluetooth fixes seanscreamz has? It seems he tried to import the stack from uclc4
icenight89 said:
CZ, u tried sky ics ucld2 base with the different cwm flashable Bluetooth fixes seanscreamz has? It seems he tried to import the stack from uclc4
Click to expand...
Click to collapse
Yep, tried the base by itself, then also tried the #1 and #2 bluetooth fix.
None work for me.
Had to go back to SkyICS UCALC.
My stereo is the double-din JVC unit.
bluetooth fix
I read that a new base is out for SKY ICS and a lot of people are saying that it fixes the bluetooth issue for them.
Tried it. Twice.
Sent from my SAMSUNG-SGH-I727 using xda premium
Duplicate post
Sent from my SAMSUNG-SGH-I727 using xda premium
CZ Eddie said:
Tried it. Twice.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Are you using darkside to wipe between flashes if so don't. And check your md5s with the files on the SD
Sent from my SGS2 LTE
mr_clean5953 said:
Are you using darkside to wipe between flashes if so don't. And check your md5s with the files on the SD
Sent from my SGS2 LTE
Click to expand...
Click to collapse
I do use darkside.
Sometimes before wiping and sometimes after.
Have downloaded UCLD2 twice, so that's *probably* not the problem.
I hope this Canadian ICS release has some additional Bluetooth fixes.
Otherwise, I may go back to Gingerbread before long.
did you install the radio following Sean's instructs:
http://forum.xda-developers.com/showthread.php?t=1600420
My first ICS rom was a bust.
Then I installed the radio and afterwards installed Sean's 4.2d9:
http://forum.xda-developers.com/showthread.php?t=1602216
I did it exactly, no superwipe, used the cwm touch he said to. Installed the base, then the update. Did not install the bluetooth mods. Only thing I installed was a different battery to fix the ics signal bars from greay to blue.
BT works better than it ever has. I was streaming Slacker and running nav on the way via BT to my Ford truck via Sync to test.
(Sync in my 2010 has always been twitchy; never worked right with my Atrix <previous phone>)
Also BT to a home speaker system is great, also.
rpolansky said:
did you install the radio following Sean's instructs:
http://forum.xda-developers.com/showthread.php?t=1600420
My first ICS rom was a bust.
Then I installed the radio and afterwards installed Sean's 4.2d9:
http://forum.xda-developers.com/showthread.php?t=1602216
I did it exactly, no superwipe, used the cwm touch he said to. Installed the base, then the update. Did not install the bluetooth mods. Only thing I installed was a different battery to fix the ics signal bars from greay to blue.
BT works better than it ever has. I was streaming Slacker and running nav on the way via BT to my Ford truck via Sync to test.
(Sync in my 2010 has always been twitchy; never worked right with my Atrix <previous phone>)
Also BT to a home speaker system is great, also.
Click to expand...
Click to collapse
You should go on sync my ride site make an account and ask them when are you getting a SYNC update, I got my usb and sd car(with new map) two weeks ago, and my car is 2011. The new SYNC is amazing, smooth.
---------- Post added at 03:40 PM ---------- Previous post was at 03:35 PM ----------
I am Running Seans Sky Ice, amazing ROM
Issue for me is car bluetooth, and after working for couple of days it started to connect and reconnect again, after I've been listening to music, so my guess (and this is after testing new radios and few other things) is stock music player does something to bluetooth or bluetooth permissions (as as well as phone it also connects to the car) and once there some connection issues when trying to turn it on through the car, the whole thing just does not work properly.
I never had a problem from update 1 to 6, it started on 8 and seems to happen on 9 again. So for the threads out there that say I've tried all the ROM and it's the same, no it's not it was fine on Update 6 here.
If you are running any other ROM, do a back up and flash Fix 2 first and then if it does not for flash Fix 1, thank you to seanzscreams.
Possible Fix:
What I did is i did a nandroid restore ( and yes it is a good idea to do a back up right after you flashed both base and update and set up LTE, to keep a clean copy)
!!!1) Before setting up or even turning it on, in Titanium Back up, freeze stock music player. !!! and it is important to do so before touching BT, as it may affect permission and this will not work(make sure not to touch MusicFX as it also affect BT permissions)
2) Reboot the device
3) Open Google Music Player and set up your music( please note if you have more then one playlist, make sure you set them up right as songs wont play continually and you will not have ability to skip them using car controls)
Google Play is same as stock, meaning same functionality, same car features and all, so you are not really loosing anything.
4) No close it
5) Go ahead set up BT with the car, you should get two messages one to permit access to phone book and one to permit accesses to call history (well it depends on the car, but if you have a newer system in it they yes) check mark the box so it does not ask you again and click yes/accept.
6) Enjoy. Should be good from now on, I've been listening for it all day, will test it more and let you know.
Please also share your experience and thought on the problem, so maybe I am wrong and it's not the issue and it's something else and we can all get it fixed.
Thank you.
BLUETOOTH IS WORKING NOW!!!!
Unfortunately, none of the possible fixes listed above ever worked for me or other JVC car stereo guys that I know about.
But the newest leak, UCLE2 is working just fine.
Thought it took much longer to recognize my stereo than normal (could just be a one-time issue), it was buzz free, error free and playing my Pandora perfectly!
Here's the leak download:
http://forum.xda-developers.com/showthread.php?t=1652679
CZ Eddie said:
BLUETOOTH IS WORKING NOW!!!!
Unfortunately, none of the possible fixes listed above ever worked for me or other JVC car stereo guys that I know about.
But the newest leak, UCLE2 is working just fine.
Thought it took much longer to recognize my stereo than normal (could just be a one-time issue), it was buzz free, error free and playing my Pandora perfectly!
Here's the leak download:
http://forum.xda-developers.com/showthread.php?t=1652679
Click to expand...
Click to collapse
Ha! Finally! alright, good deal man
Did this fix the timeout issue as well? I'm running UCLE2 as well but still get the timeout once in a while
mine seems to be working fine now on UCLE2 but I've only tested it for a day.
Hi all,
I'm in desperate need of help. Everything in my HTC pico is working fine except for call receiving and dialing. If I call someone with the speaker ON then they can hear me clearly & I can hear them too. But when I call someone with speaker OFF, it initially shows that its dialing but after few seconds it returns to contact list. If somebody tries to call me they get my line busy or sometimes gets connected but the caller is unable to hear me clearly. I've tried custom roms as well but issue remains. As of now I'm using Europe Stock ROM and my phone is rooted with bootloader unlocked. My phone is S-On, would that be the cause or something?? Is my phone locked for a particular network and if it is then how can I sort this out. Any advise and suggestions are welcome, many thanks.
Regards,
Tariq Alam.
Dude it seems to be a hardware issue. And its nothing to do with S-on.
Seeing to that u have tried installing different rims without sucess,u should probably head for the service centre.
Sent from my HTC Explorer using xda premium
Try flashing other roms iff problems persist go to service center it may be a hardware problem so they repair it!
Thanks very much for your suggestions. It's working now apparently, I'm using Europe stock rom. I'll install the custom rom and then see how it behaves. Thanks once again.
I was using stock rom and the problem seem to be solved but once i installed the custom rom CM10 for htc pico then it got worse. I reverted back to stock rom and again the problem. Having said that, none of my headphones work when i insert it into the headphone jack. I think that's the root which is causing problems.
I'll try a bluetooth device and see what are the results. Any suggestions for a bluetooth device that will not only used for calls but also for music etc.
Many thanks.
Brick.boy
I have a Sony bluetooth head unit in my car which supports handfree and audio streaming profiles. I can play my music through the head unit just fine via bluetooth. I can also make and receive calls without problem when I am listening to the radio (ie when I am not listening to my own music). However, when I am playing my own tunes and I either make or receive a call, the head unit indicates I am on a call, it mutes the music but I just get silence through the speakers.
I used to have a Galaxy S Advance and it all worked just fine without too much configuration on the phone or head unit; basically just pair them up, make sure the right boxes are ticked in the bluetooth options and thats it.
Any idea what the problem could be? I've tried an upgrade to 4.2.2 but it didn't help...
Hi,
I have a similar problem. I can pair my s2 plus with cm11 from this thread to my car kit (Parrot MKi 9200). Playing music via phone on the car speakers works fine but when I place a call the receiving phone just gets loud static (and my voice very very silent).
I wanted to ask the developer of the cm11 I am using if he sees a way to exchange the bluetooth module (or what androis equivalent is) to the one of e.g. Android 4.1.2 because I know that one works perfectly. I am posting here because I havent reached 10 posts yet.
Of course I am open to other workarounds and ideas.
Thanks,
Kiesel
Bluetooth
Same issue here,
everything (music etc.) is okay, but the phone connection.
I'm connecting to my Ford Sync.
I can connect, but then the quality of the voice is very very bad, I can hardly understand anything...
I thing there's a configuration file in the etc/ folder, maybe that need some upgrade?!?
Hope someone can help, because I really like to keep CM11 on my phone...
Dan
This is a known problem wich has been asked 100 times before
Sent from my GT-I9105P using xda app-developers app
safariking said:
This is a known problem wich has been asked 100 times before
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
How is this message supposed to be of any help? Of course we know that. We have seen a lot of threads. I have read the whole bug report including all the comments on googlegroups, I have browsed dozens of websites and googled my ass of. What I didnt find was an explanation (at this point I dont expect to find a fast solution anymore). After reading the googlegroups bug call I thought it was a problem with the bluetooth stack that apparently is being redeveloped by google. But here cooldevelopment said it isnt a google problem.
I fully understand that it must be annoying for you to see this question a million times but please understand, that it is also annoying (and unsatisfactory) to not know whats going on.
DeKiesel said:
How is this message supposed to be of any help? Of course we know that. We have seen a lot of threads. I have read the whole bug report including all the comments on googlegroups, I have browsed dozens of websites and googled my ass of. What I didnt find was an explanation (at this point I dont expect to find a fast solution anymore). After reading the googlegroups bug call I thought it was a problem with the bluetooth stack that apparently is being redeveloped by google. But here cooldevelopment said it isnt a google problem.
I fully understand that it must be annoying for you to see this question a million times but please understand, that it is also annoying (and unsatisfactory) to not know whats going on.
Click to expand...
Click to collapse
I know what you mean but i think the best method now is to wait until cooldev find a solution to this
As this is a bluetooth problem topic, i just want to ask one question. Can't use the CM 11 and ROM's based on it, because the sound problems with connection in my car. So back to stock ROM. I flashed the cooldev's kernel to get a better battery life, but after flashing, bluetooth makes the same problem as CM. Do you guys have the same issue?
kidmanis said:
As this is a bluetooth problem topic, i just want to ask one question. Can't use the CM 11 and ROM's based on it, because the sound problems with connection in my car. So back to stock ROM. I flashed the cooldev's kernel to get a better battery life, but after flashing, bluetooth makes the same problem as CM. Do you guys have the same issue?
Click to expand...
Click to collapse
Hmm, interesting. I will try this out as well. Might probably be a week though, I am leaving for holidays tonight and cant risk making my phone unusable. Maybe somebody else is willing to give it a try?
kidmanis said:
As this is a bluetooth problem topic, i just want to ask one question. Can't use the CM 11 and ROM's based on it, because the sound problems with connection in my car. So back to stock ROM. I flashed the cooldev's kernel to get a better battery life, but after flashing, bluetooth makes the same problem as CM. Do you guys have the same issue?
Click to expand...
Click to collapse
Thanks now i know where to search the problem.
Hi,
here is a logcat of a bluetooth connection during a call on stock rom/stock kernel.
What I did:
-start logcat
-start bluetooth
-chose a contact
-call contact-
-talk for a minute
-hang up
-stop logcat
I then wanted to flash the mosh kernel and do the same again but the last time I checked there wasnt this huge plethora of different kernels to choose from. Very impressive work!
Could you tell me which one you would like me to flash and I would then redo everything?
Hi,
I tried installing mosh kernel 1.8 and 1.85 (for stock, init.d enabled) on sazy rom but it didnt boot. It stayed at the very first screen you get when you turn the phone on. I then installed your cm11 build8, connected via bluetooth to my car and had someone call me.
Attached is the logcat.
Do I need the samsung stock rom for mosh kernel? I thought sazy rom was a stock rom?