Database Info

MS Voice Command not working..for many of us..

I'm having this problem and have seen several others with same. When trying to use VC, get the "..have encountered a problem, try restarting" error. I fixed this problem with registry corrections before but the required Keys are not setup when installing under WM5 or lower. Just having this problem with WM6 (reloaded 1.7.1). Any ideas?

Atra said:
I'm having this problem and have seen several others with same. When trying to use VC, get the "..have encountered a problem, try restarting" error. I fixed this problem with registry corrections before but the required Keys are not setup when installing under WM5 or lower. Just having this problem with WM6 (reloaded 1.7.1). Any ideas?
Click to expand...
Click to collapse
What else do you have loaded on your phone(s) that have this issue. I use VC on all WM6 and WM5 roms that I've run (and ones I've cooked, like the Crossbow Reloaded ones you mentioned) and have never had this error and I've never tweaked around registry settings. I just install the cab and it works...
Are you installing VC 1.6 US?

With all the WM6 roms i've used (not as many as some but i'm new here) I haven't had an issue with VC 1.6 US either.

don't think it's a definite answer, but i did have this problem in the past when i installed voice command on my memory card rather than on phone memory. sometimes during loadup after a soft reset i would get that error...think it's because it takes longer to load from the card and voice command is setup to run right away (always in the background)...
if it's installed on the phone memory...dunno...sorry

I run VC 1.6 US and have never had a problem with it. I always install it in main memory.

I give..
Going back to WM5 Molski. To answer some of the post..
It's VC 1.6
No other software loaded..Fresh flash.
Installed to device, not storage *only option offered for install location*.
Get a message during device install: (...recommend installing to main memory. Do you still want to install to "."...) I answer Yes because it just aborts install to say No.
Thanks for the replies guys..

<--[Totally Screwed]
OK, now I have no sound from the speakers and Mic not working. While in Phone mode, the speaker button stays in the On position and won't turn off. Got the old Voice Command registry settings in place but it seems the new problem is the culprit. Going to start a new thread with new problem unless someone has any ideas..

Closing out
Back up and functioning on Molski 3.3 Crossbow. From what I can tell, during the WM 6 load, the speaker phone option became stuck in the On position but the speakers and Mic were not functioning. Voice Command seemed to know there was a problem and gave the "..restart VC.." message. After re-flashing Molski (a few times, still no joy), I flashed with the wired earbud/Mic connected. After flash and phone restart, I removed the headset while in phone mode. Speaker button reset to normal, phone speakers/mic started working again. Reloaded Voice Command and all worked.
aaahh the joys of PDAdome.. Where else can you get the thrill of accomplishment by getting back to the same friggin place
Thanks again for the replies all..

I have actually had this error a LOT with various ROMS, all were based on the Faria real thing base I believe. I'm not sure if that's relevant or not. At first it would just pop up randomly. Sometimes I could restart it and it would be fine, others it would never restart until I soft reset. The errors tended to get more and more frequent until it finally stopped working completely. Even on a reset it would come up right away. I hard reset that particular rom and it was fine for awhile but the issue returned and much more quickly. I never really installed any software onto the phone that ran in the background so I'm really at a loss as to what causes it. The last couple of ROMs I used didn't have VC and I never bothered to reinstall it because it kept having errors anyways. I am about to reflash yet again so I guess I'll put it in if it's not already there and see how it goes.

Give Molski a try..
Avatar28 said:
I have actually had this error a LOT with various ROMS, all were based on the Faria real thing base I believe. I'm not sure if that's relevant or not. At first it would just pop up randomly. Sometimes I could restart it and it would be fine, others it would never restart until I soft reset. The errors tended to get more and more frequent until it finally stopped working completely. Even on a reset it would come up right away. I hard reset that particular rom and it was fine for awhile but the issue returned and much more quickly. I never really installed any software onto the phone that ran in the background so I'm really at a loss as to what causes it. The last couple of ROMs I used didn't have VC and I never bothered to reinstall it because it kept having errors anyways. I am about to reflash yet again so I guess I'll put it in if it's not already there and see how it goes.
Click to expand...
Click to collapse
I didn't have any problems with his roms (..and went back to it with no probs). Only started having problems after I tried the Faria WM6. If the Molski works for you let me know. We'll give Faria a nudge.. Good Luck!

VC issues I've run across
I've tried pretty much every WM6 rom out there.... and cooked some of my own using the Pandora Kitchen.... and it seems that VC 1.6 decides to ignore my bluetooth activation button on some roms... all incoming calls and texts and reminders get announced as expected and the handsfree works great, but I can't push the headset button and get VC to wakeup.... Tried disabling VC and then re-enabling it, repairing the bluetooth, removing and then readding VC... nothing would fix it.... reflash with a different rom and presto! VC works!
At one point I had a strange issue with the bluetooth microphone.... VC would work fine (I'd ask "what time is it" and it would tell me the time) but when I was in a call, no one could here me.... I ended up enabling and then disabling auto gain control... wallah, mic works again.... weirdness.... (don't think this was rom related)
Anyway... the roms that I've had this problem with was XDA Mobile 6 (release 1... relase 2 is kicking a$$) and I think NBD 7.1... never had a problem with a ny Pandora cooked roms.....
Anyway... my $.02... (I'll probably get change)
kudo's to the rom wizards that be...

never had a problem. Installed in a few different roms. works fine
installed to main memory.

wolverine9827 said:
I've tried pretty much every WM6 rom out there.... and cooked some of my own using the Pandora Kitchen.... and it seems that VC 1.6 decides to ignore my bluetooth activation button on some roms... all incoming calls and texts and reminders get announced as expected and the handsfree works great, but I can't push the headset button and get VC to wakeup.... Tried disabling VC and then re-enabling it, repairing the bluetooth, removing and then readding VC... nothing would fix it.... reflash with a different rom and presto! VC works!
Click to expand...
Click to collapse
Voice Command Bluetooth Fix
View attachment 43147
I can't take credit for this and I can't give credit but Thank you...!
I've used this and has worked when VC w/n initiate via earpiece.
There's several threads on the specifics of this cab.

Speakerphone problem

Ive just upgrade to the beasty WM6 ROM and everything works fine except for one thing. When i am using the phone, the speakerphone doesnt work. The button is there and nothing happens when i press it.
Anybody experienced the same issue, or got any ideas?

I also experienced the same...
So, I'm using "Jwrightmcps Crossbow ROM Update 2.12.08 WWE" right now.
Speaker phone works fine.
However, phone hang-up very often.
I'm thinking of installing other roms...

problem
I too have this problem (no loud speaker during call) but know there is an answer on these forums somewhere. Only trouble is so many ask for help using the same words as the search string would contain. End result is needle in a hay stack.
Would be helpful if these begging posts (and the 'yeah, me too' posts) could be removed after 3 months. I doubt anyone keeps a ROM with a bug that long without re flashing or learning to live with said bug...agreed?

stevedotcom said:
Ive just upgrade to the beasty WM6 ROM and everything works fine except for one thing. When i am using the phone, the speakerphone doesnt work. The button is there and nothing happens when i press it.
Anybody experienced the same issue, or got any ideas?
Click to expand...
Click to collapse
please re-upgrade
hopefully be normal

Try another ROM or ask in the ROM-specific thread, rather than generally stab in the dark. Every ROM will potentially have bugs and quirks, some are particular for the ROM, some can appear with various software installs or hardware modifications. If nobody in the ROM-specific thread encountered the same problem, chances are, it's you. Might want to hard reset your device and see if the speakerphone works BEFORE you install your applications and programs. If no luck and you know your speakers are functioning otherwise - try another ROM.

Can't turn on the bluetooth

hello,
unfortunately i cannot turn on the bluetooth from comm manager, it turns on and after 1 second is off again.
any solution for this problem?
thanks.

I have had this problem before and unfortunately am having it again. Only solution I have ever found for this is a hard reset and then reinstalling all your apps. If you try to restore from a backup from Sprite Backup, for instance, the problem remains. This would lead me to believe that it's a setting or a registry issue somewhere but I haven't been able to locate exactly what would be causing it and don't know enough about programming in WM to write something to figure it out.
Not a great answer but there it is.
db

MegaHz said:
hello,
unfortunately i cannot turn on the bluetooth from comm manager, it turns on and after 1 second is off again.
any solution for this problem?
thanks.
Click to expand...
Click to collapse
Hi, I have a Uk version of the touch cruise and I have the same problem. I just did a hard reset but the problem remains. Turning bluetooth on is impossible. It just try's to turn it on and shuts it off immediately.
Maybe it has something to do with GPRS? I am always connected to the internet. I tried to disconnect but then bluetooth still doesn't work. Can anyone help? Thnx!

No one has a clue?

I had this prob with bluetooth and wifi following the use of wmwifirouter- after hard reset and no wmwifi all goes well...
On a French SFR rom

any other idea?

Same problem... beginning to wish I'd gone all Apple and bought an iPhone. Anyway.... To trun it on, I had to go to Comm Manager>Settings>Bluetooth>Mode>Turn on Bluetooth. That worked despite the Comm Manager still showing Bluetooth as "off".
It only connects 1/2 the time to my headset or handsfree in the car
Otherwise, the phone crashes only once a day! Great! Thanks!

ok, great to see more people having the same problem but i hope that someone has a sollution...
When I try to turn bluetooth on in the communications settings i get a message saying there is a hardware error! :S
Ohw btw, I'm not using any router programs or other and my WIFI works fine.

has anybody of you having this problem tried to change to another rom?
if yes? did this worked?

any news on this?

No news, I don't want to try for a different rom because i don't think it will change anything. It just seems like its a faulty device which is a real shame. I've already contacted the place where i bought it and see if i can get a new one.
I also have problems with my microphone during calls, photo camera does often not work and the touchpad reacts very slowly to my touches. Very annoying!!!!

Yup, am returning mine to HTC aswell. Not even sure I want it back. WiFi stopped working too, and then it stopped receiving text messages, and everyone said they couldn't hear me when I called them. Great

Some of you guys got a bad device, there are thousands out there working properly.
If some of you guys flashed a newer Radio, the one form the test-ROM, then this is your problem.
And some of you guys have a quite gay branded ROM (slow responsiveness of touchpad). The original HTC ROM on the FTP and even more so a cooked ROM would solve alot of your problems. But be aware, flashing without having a backup ready is going to void your warranty if you want to exchange it having a custom/non-original ROM on the device.

What's up Schaggo
I am experiencing the same problem these gentlemen are mentioning and my ROM is not gay or lesbian. It is the original one.
TC is my 7th HTC device and I can see the quality of the ROMs decreasing a lot on every new device. I feel like HTC needs a real competitor to move up its arse quicker.
All I can say is that it really annoys me to hard reset this [email protected] everytime I "accidentally" use a native feature called Flight Mode. By bluetooth seems to fly away and never get back.
Lots of time the GPRS settings have to be reconfigured too. Some people I know have problems with GMail IMAP4 accounts when sending messages after some time. I never had this problem on my Kaiser neither on my Niki.
The lack of a video driver really is an egg on our faces, because I can't believe my ole Qtek 9100 responds quicker than these "all the bells and whistles" Qualcomm 7200 super-duper geared up devices.
So, if you feel like not contributing, please do not mess around.
Your signature tells me you are a wise man, but your comments show me otherway.
-Feaps

PB of BT still there with custom rom
MegaHz said:
has anybody of you having this problem tried to change to another rom?
if yes? did this worked?
Click to expand...
Click to collapse
Hi
I've tried many custom rom and the PB continue. "PB with the hardware oh BT".
Hard reset doent change anything.
my initial rom (SFR France) was working
custom rom (blackwidow + Bepe 058) are buging...
nedd some help !

Thanks alot for that input feaps. I guess I have to clarify a little bit.
My answer was supposed to be pointing in different directions. The first and general information I tried to contribute was, that it is not a common Polaris problem to have a broken Bluetooth unit. Which doesn't help at all to ppl affected, but it should tell them, that they probably got a bad device and should exchange it first before blameing htc in general and shouting for an iPhone.
It only was partially directed at specific persons. At madinga for example: did you try hardresetting your device? It could be a corruption in your system which causes all those problems. I doubt it though, if you suffer the loss of so many functions at the same time I suspect the mainboard to be broken. But nonetheless, hardreset it, see if its working, BEFORE you put your backup back on the device again since that could restore the corruption. If it doesnt work, exchange your unit, I hope you'll get a working one back.
My second line was directed at all people which have overwritten their original Radio with the 1.58.25.14 originating from the HTC Test ROM which can be found on the ftp server. The Bluetooth part of that Radio is flawed and leads to the problems described in this thread. I quite nicely pointed that out and told people where to have a look before shouting around. I do know that because I tried it myself and couldnt get my Bluetooth devices working. Once I flashed the original Radio back, my BT problems were gone.
And my third line - in which I may chose the wrong words, 'gay' for example - holds information targeted at people with for example the branded french SFR ROM or the original HTC french ROM. The SFR ROM is just horribly branded and if you go through the threads here you'll find people complaining about problems which then turn out to be related to the ROM. The french HTC ROM is flawed as well, it has severe problems with the volume control. I don't exactly remember what it was, but it's a flawed ROM, thats for sure. The German o2 ROM isnt flawless either, I know that because I originally had that ROM. Once I flashed my orbit 2 with the original HTC WWE ROM, I found it to be working alot better and smoother than with the o2 ROM originally provided. And this is where my last line comes into play: if you suffer problems related to your currently flashed ROM, they could be diminished by flashing an alternative ROM. But if your device is broken, and I personally and strongly believe that everybody fooling around in this forum should be intelligent enough and able to determine the sense of my words, eg. if he/she suffers a ROM problem or if the device just simply is dead and take appropriate actions.
And now to your contribution feaps. I feel personally attacked by your words. Thats why I defended my words in all the paragraphs above. Trust me, I've had enough mobile devices of all sorts to know what it means to get a not working once. Its frustrating and makes you want to throw it out of the window. And being able to see the quality decrease over time is just another drop on a hot stone. I agree. But be honest, if your BT unit works and stopps working once you engage a software based function, the problem is software related, dont you think? As for the GPRS settings, I cant tell. Since I use a free ROM which has the wizard built in (o2 removed it from their ROM) I didnt switch my SIM and the configuration worked, automatically and every single time. And I do use IMAP as well on my personal E-Mail account. Until now I didnt run across any problems, so I cant give you any feedback on that either.
So rethink again if I mess around or not or if I actually try to contribute and help the freshmen, coming into this forum and flashing whatever they find and breaking their devices. And recommending to flash the original HTC ROM, which should be/is the base for everything floating around, breaking your devices, is a serious input to everybody.
Edit: I forgot to add, pointed at nooms, there are cooked ROMs out there which stupidly have the new, flawed Radio baked in. Which Radio are you on? Try Start > Settings > Tab System > Device Information > Tab Version. Are you inadvertedly still on Radio 1.58.25.14 or back to (original) 1.58.21.23?

Hi everyone,
I agree with Schaggo completely. Most of the time problems have something to do with the software on the device. But I a not a tweaker like most of you guys, i've just bought my first (and hopefully not last) HTC phone. If i have problems of some kind, all i can do is reset the thing. A hard reset if necessary. I've done that many times. I can't change the software that comes standard and i don't think i should be the one who has to do that. Shouldnt HTC be doing that??
Anyway, Bluetooth keeps saying it has an hardware error. My radio version is a standard 1.58.21.23 but isnt finding any radiostations here in holland. Is it also broken? (sorry, i know, its a bit off topic)

You're right
schaggo said:
(...)
My answer was supposed to be pointing in different directions.
(...)
And now to your contribution feaps. I feel personally attacked by your words.
(...)
But be honest, if your BT unit works and stopps working once you engage a software based function, the problem is software related, dont you think?
(...)
As for the GPRS settings, I cant tell. Since I use a free ROM which has the wizard built in (o2 removed it from their ROM) I didnt switch my SIM and the configuration worked, automatically and every single time. And I do use IMAP as well on my personal E-Mail account. Until now I didnt run across any problems, so I cant give you any feedback on that either.
(...)
So rethink again if I mess around or not or if I actually try to contribute and help the freshmen, coming into this forum and flashing whatever they find and breaking their devices.
Click to expand...
Click to collapse
Well put. Sorry for being rude, but I keep seeing people offending others day after day in this forum that used to be high level; but that doesn't mean I should act the same way.
I totally misread you and please accept my apologies.
My ROM is: 1.25.405.1 WWE
ROM Date: 12/11/07
Radio Version: 1.58.21.23
Protocol Version: 25.65.30.04H
One thing I could notice is that HTC has a flaw in the Flush HKCU to Permanent Memory While Shutting Down. Some keys are not written.
One example is the MagiCall (an app I use) registration key. The software maker had to write a flush app for doing that. Another example is the Start>Settings>System>Error reporting. No matter what you chose, after a power cycle or a soft reset, it always go back to "Disable...".
I have, also, already tested the device after the hard reset with no extra apps on it. Same lame behavior on BT...
So, SW QA levels are really dropping fast on new HTC models. That is pretty bad.
But anyway, I have an open case with HTC and if I find something contributive I will toch base with this thread.
Once again, sorry for being rude.
Best,
-Feaps

Furio83 said:
Anyway, Bluetooth keeps saying it has an hardware error. My radio version is a standard 1.58.21.23 but isnt finding any radiostations here in holland. Is it also broken? (sorry, i know, its a bit off topic)
Click to expand...
Click to collapse
Then I guess you most probably got a bad unit. I guess the only solution at this time is an exchange.
The Radio-Firmware doesnt control the FM Radio btw The Radio-Firmware controls connections to the providers network, Wireless LAN and Bluetooth. But the FM Radio seems to be really bad in the Polaris, a lot of ppl I know complain about it.
feaps said:
please accept my apologies.
Click to expand...
Click to collapse
No problem dude! There is no need for such an excessive appology. We are in a Forum and people have different oppinions and I think its totally acceptable to shout at each other. I just wanted to express that I'm not in accord regarding your judgement of my post. But thanks a lot, I seriously really appreciate it!
Yes, your device seems pretty standard to me and the scenario you described logically made me think of a software error. But this seems very unlikely now. I'm out of ideas for the moment then, I guess you have to return or exchange it too.
You are perfectly right about the dropping SW QA though. You can notice the registry glitch in other areas as well: backlight timer always reset to 30 sec, and there are more settings all over the place which don't get saved properly.
Again, no problem, everybody lets be cool

Bluetooth doesn't turn on
I have the same problem. Did anyone find a solution?
Also camera fails to initialize, touch pad is sometimes very slow for initial reaction. I have NO added programs beyond manafacturer originals and have tried a number of hard resets. Doesn't help.
Jeremy

TomTom + Dutty's 6.1 trouble

Anyone have trouble where the top most bar (the one with the battery & signal strength icons) locks up after running TomTom 6? The bar appears to have a part of the tomtom screen graphics on it, and it completely covers all the stuff that should appear up there. Any ideas? It seems to be causing a failure of some sort.

I have exactly the same problem. In fact it happens on some other apps too. I'll try and get some reproducible sequences up here for the smarter folks to take a look at.

I'll try and do the same. Have you found a workaround to fix things, or do you do a soft reset?

motocrossmann said:
Anyone have trouble where the top most bar (the one with the battery & signal strength icons) locks up after running TomTom 6? The bar appears to have a part of the tomtom screen graphics on it, and it completely covers all the stuff that should appear up there. Any ideas? It seems to be causing a failure of some sort.
Click to expand...
Click to collapse
try to update ur tomtom

waichai said:
try to update ur tomtom
Click to expand...
Click to collapse
whats the newest version?

I can't duplicate this anymore. Go figure...

waichai said:
try to update ur tomtom
Click to expand...
Click to collapse
I'm on 6.030

I will only say this . . .
http://forum.xda-developers.com/showthread.php?t=363431
Please look at that page and good luck. 6.1 and any GPS program are having difficult problems. This, tested by myself and others, fixes those problems for the time being. Good luck.

This is not a TOMTOM problem, this is a general issue on the ROM. I can not reproduce it reliably, but it has happened again. Basically, the Start bar stops.

Definately a general rom problem. I tried all there recommended radios, all have had the problem.

I had the same problem but gone when deactivating CUBE.

msharaf said:
I had the same problem but gone when deactivating CUBE.
Click to expand...
Click to collapse
That seems to have helped. 1.5 days with no problems... Will report back soon.

No Sound?
I got no sound, that's kinda weird-ish right?
Though my speaker (ear) when calling seems to work, the outside speaker for listening to mp3's or putting the call on speaker does nothing.
Anyone recognizes this?

troyk said:
I got no sound, that's kinda weird-ish right?
Though my speaker (ear) when calling seems to work, the outside speaker for listening to mp3's or putting the call on speaker does nothing.
Anyone recognizes this?
Click to expand...
Click to collapse
I had the same problem, you need to read the second post on the Dutty WM6.1 thread, you must use a radio compatible with 6.1, there are atleast 3 there, as soon as i flashed a new radio to my phone my sound worked perfectly

That's strange dude, i already used a WM6.1 compatible Radio rom from another Post. Well, thnx anyway.

Blue toothe won't hang up

Anyone have this issue or a fix? BT connects perfect, works, perfect, but the command to hang up on the BT device dosen't properly hang up, and the phones returns the #777 error.
It does answer from the BT device properly. It does with with my other cell phones.
TP2 VZW

I had the same problem with my Voyager Pro headset and found that if I hit the button once, wait a second and hit it a second time it hangs up. Maybe it will work for you.

I have the same issue.
Using Moto HT710 and VZW stock ROM

same issue in w/ 09 bmw nav/bt connection. I have to grab the phone and press the end button as it never hangs up.

cab might fix it
Over at PPCGeeks.com some have fixed the issue using the cab in this thread: http://forum.ppcgeeks.com/showthread.php?t=90155
I am having the issue with my Ford Sync system. I will test the results of the cab this afternoon and post them. Hopefully this works because it is fairly annoying.
Here is the cab if anyone wants it.

Well it didnt work for my Verizon TP2 and the Ford Sync system, hopefully someone else has better luck with it.

This seems to work for me. It hangs up almost instantly now. Thanks for the find.

rsbrown69 I am glad I could help, could you post which version of the TP2 you have (verizon, tmobile, ATT). I just want to know if it worked on another verizon phone or not, if so I will hard reset and give it another shot.

wlawyer said:
rsbrown69 I am glad I could help, could you post which version of the TP2 you have (verizon, tmobile, ATT). I just want to know if it worked on another verizon phone or not, if so I will hard reset and give it another shot.
Click to expand...
Click to collapse
I am using the mostly stock Sprint TP2. The only main modification I have done is the Touch Pro 2 cleanup http://forum.ppcgeeks.com/showthread.php?t=88640

Looking at the thread on PPCGeeks it looks like mostly sprint users having luck with the cab as well. Hopefully something will come along for the verizon version as well.

I have the Sprint version and have installed the cab. I do not see any improvement. I experience intermittent problems with or without the cab. It doesn't seem to make a difference. FWIW, I use the Jawbone Prime and Jawbone 2. Same with either.

Just out of curiosity did you do a soft reset after the install? I remember someone mentioning that in the original PPCGeek thread.

Yes, I did a soft reset. Actually, a soft reset with or without the cab seems to solve the problem....for a while. Then it shows up again. It is a bit strange.

doesnt work
I tried it on my Sprint TP2 and it does not work either. I installed it and did a soft reset and it still does not work for me either.
It would be the best thing that happened if it did work cause I use my BT all day and this sleep mode BT thing on the TP2 is cool for battery life but it sucks for using the BT feature which to me is more important than battery life and I have car chargers and usb chargers so I would rather have a working BT.
Does anyone have a cab or fix that will allow the BT to function like the old Touch Pro? That phone had a great BT even if the battery life was poor.
Thanks for the attempt to fix the issue but it is a no go here.

Does not work on stock VZW rom

Didn't work on my TP2 VZW either.

The one person that has responded that it worked had the cleanup cab installed. I am going to try a full reset and put only the cleanup cab and the bluetooth cab on and see if I can get results. Yeah this bug is that annoying to me. http://forum.ppcgeeks.com/showthread.php?t=88640

Ok I did a hard reset, programmed the phone, installed the cleanup cab, installed the bluetooth cab, joined the phone to my ford sync system, made a call, and guess what... the phone hung up beautifully using my standard steering wheel control for sync. There must be something in that cleanup cab that is either A) the actual fix or B) a necessary piece of the fix. Sorry but I am not going to hard reset again to test it, mine is working so hopefully this info can help you guys as well. On a side note that cleanup cab is pretty nice but read the thread to make sure you want/need all that is included.

wlawyer said:
Ok I did a hard reset, programmed the phone, installed the cleanup cab, installed the bluetooth cab, joined the phone to my ford sync system, made a call, and guess what... the phone hung up beautifully using my standard steering wheel control for sync. There must be something in that cleanup cab that is either A) the actual fix or B) a necessary piece of the fix. Sorry but I am not going to hard reset again to test it, mine is working so hopefully this info can help you guys as well. On a side note that cleanup cab is pretty nice but read the thread to make sure you want/need all that is included.
Click to expand...
Click to collapse
The cleanup cab alone hadn't fixed the problem for me so that is when I tried this threads fix. So far it works more often than not but it still does not hang up every once in a while. Must be a combination of things between the cleanup cab and this one but still not the correct fix, better but not enough.

Mine worked none of the time before, I basically had to wait for the caller to hang up or pull my phone out of my pocket and press end, so any improvement is huge for me. I am traveling this weekend and next week so hopefully I will have more info to report at least with my setup with Sync (never got into the earpieces, so not testing that).