I just buy a game(dodopachi resurrect) that do not support TF700 but TF300 do, so I try to rename it in build.prop. but it didnot work.
Do the JB system not to read build.prop? or something should be done?
TF700 with official rom JB 4.1.1 and rooted. thx for any help.:laugh:
Glotiv said:
I just buy a game(dodopachi resurrect) that do not support TF700 but TF300 do, so I try to rename it in build.prop. but it didnot work.
Do the JB system not to read build.prop? or something should be done?
TF700 with official rom JB 4.1.1 and rooted. thx for any help.:laugh:
Click to expand...
Click to collapse
I haven't figured out where the market reads the device name from... I tried various build.prop edits but it still knows I'm using a TF700.
sbdags said:
I haven't figured out where the market reads the device name from... I tried various build.prop edits but it still knows I'm using a TF700.
Click to expand...
Click to collapse
Even I tried replacing whole build.prop from TF300, it still did not work.
Glotiv said:
Even I tried replacing whole build.prop from TF300, it still did not work.
Click to expand...
Click to collapse
Same here
Related
I've got a TF101 with prime 2.1.1 installed with 3g enabled. The only problem is my device seems to be reporting to the market as being a TF101G.
As such with today's release of GTA 3 I can't install it as it says its not compatible with my device. However futher down the the list is my TF101 from before I put the new rom on.
Has anyone else seen this and is there anyway I can change it without going back to stock.
just wonder why gta 3 is compatible with tf101 but not with tf101g.... hardware is the same.
very strage and very sag, i have the "g" version. maybe theres a patch in die futre allowing playing on the tf101g
greetings
Silly me posted the same question in General. I'm sorry, and I know I should be whipped good.
But I found a solution to our "G" problem. Flashing the 3G disabler removes the G from the product name. Voilá! GTA3 available!
ive flashed the diabler on three different roms and no luck. everything stays the same. is there something else i need to do or is my tf missing something to make this flash successfully?
Hard to say. I'm not that into the details, it just worked when I did it.
Where is the flashable 3g disabler? Searched but no results.
Thanks
if all else fails, and you have a PRE B70 model and have used nvflash before, replace the included blob (its a tf101g blob) with the tf101 blob thats available on the same page to download...
standard WARNING applys, this will be a WIPE, you will lose ALL DATA, and as far as I know, if the 3G disabler doesn't work, then theres no way around it, but once you have done it, you can flash whatever you like without worry and it will still be listed as a TF101 (its what I had to do a while back when i first got my TF101 and wondered why it showed up as TF101G on my google account)
cheers
EDIT:
Should be working fine ^^
So with other stories in properties it says to be an TF101G but its an TF101, or is it an TF101G then just change to TF101 in build.prop (Which this says what version you got)
but before do a nandroid backup, as in some cases your PAD/Phone wont boot due to some line missing or misspelled (if your very unlucky)
BTW i tried cracked version (Sorry but still i got no credit card to be linked to google market)
but game crashed ^^ but as said it was cracked, and yeah, was Data for Tegra2 Acer (but anyhow)
it should work ^^ Good Luck ill post if i find any solution to your problem, but if the game wont start it will be a H*** to get money back, according to someone it was 15 minutes Max to get money back if it didn't work correctly O___o so sometime's its good to wait for sure
The-Kevster said:
Where is the flashable 3g disabler? Searched but no results.
Thanks
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?p=17495220
baseballfanz said:
Here
http://forum.xda-developers.com/showthread.php?p=17495220
Click to expand...
Click to collapse
Thanks that's great. I was looking for a CWM file as it is flashable!
Freemantig said:
ive flashed the diabler on three different roms and no luck. everything stays the same. is there something else i need to do or is my tf missing something to make this flash successfully?
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=20347866&postcount=2065
no luck
baseballfanz said:
Try this
http://forum.xda-developers.com/showpost.php?p=20347866&postcount=2065
Click to expand...
Click to collapse
market fix does nothing either. flashed it on prime and android revolution with no change. still shows tf101g and i still cant get my apps. i read that i could replace the blob but to be honest without someone explaining this a little better im not sure how to do this. i would greatly appreciate someone explaining the process possibly with some links to resources. sorry for sounding like a noob but ive never used nvflash and i dont want to just dive in and end up with a brick.
Hi is it just a matter of editing the build.prop in the ROM before flashing or do I just need to exchange the recovery.
Might be interesting as people are still waiting for ROMs for the TF300TG I know 3G won't work in this case...
Best Blubberor
Blubberor said:
Hi is it just a matter of editing the build.prop in the ROM before flashing or do I just need to exchange the recovery.
Might be interesting as people are still waiting for ROMs for the TF300TG I know 3G won't work in this case...
Best Blubberor
Click to expand...
Click to collapse
keep in mind that if you flash stock jb or derived (like hydro jb) you cant go back so be really, really sure that you dont need that 3g
was only thinking of CM10 and derivates
I used Hydro 4.4 and CM9 (and CM10), all for TF300T, on my TF300TG.
Just flashed via recovery in the usual way.
Everything works except the 3G, obviously.
I did so as well, BUT they latest recovery is now correctly set to TF300TG and not TF300T - as there is a "model check" within the installation process you need to find a way to get it working on the TF300TG.
Nobody realized this problem before??
Blubberor said:
I did so as well, BUT they latest recovery is now correctly set to TF300TG and not TF300T - as there is a "model check" within the installation process you need to find a way to get it working on the TF300TG.
Nobody realized this problem before??
Click to expand...
Click to collapse
With TWRP yes, with CWM no.
Hi you mean installing CWM solves this problem already or is it that there is non specific for the TF300TG instead of just TF300T (so they don't differentiate??)
Blubberor said:
Hi you mean installing CWM solves this problem already or is it that there is non specific for the TF300TG instead of just TF300T (so they don't differentiate??)
Click to expand...
Click to collapse
When i try to flash Hydro 4.4 3G, TWRP blocked me for mismatch.
CWM doesn't.
Sorry for my bad english.
Is there any way to root or unlock the Infinity after updating to Jellybean. The current methods do not work. Will i have to wait for someone to come up with a new tool or what
Downgrade back to .30
http://forum.xda-developers.com/showthread.php?t=1915598
Install SuperSU and OTARootKeeper
Use OTARootKeeper to protect root
Update to JB
Use OTARootKeeper to restore root
macaumen said:
Downgrade back to .30
http://forum.xda-developers.com/showthread.php?t=1915598
Install SuperSU and OTARootKeeper
Use OTARootKeeper to protect root
Update to JB
Use OTARootKeeper to restore root
Click to expand...
Click to collapse
It looks like there is different versions of .30 does it matter what one. Thank you so much
Just follow the SKU of your infinity and download the file from ASUS.
macaumen said:
Just follow the SKU of your infinity and download the file from ASUS.
Click to expand...
Click to collapse
Man i am so confused right now. I have hacked many phones including my S3 and flashed many times. I am just confused coming to Asus. I have never had a asus device before and down want to screw anything up. Any extra help would be greatly liked thanks man
aldude345 said:
Man i am so confused right now. I have hacked many phones including my S3 and flashed many times. I am just confused coming to Asus. I have never had a asus device before and down want to screw anything up. Any extra help would be greatly liked thanks man
Click to expand...
Click to collapse
Settings --> About tablet --> Build number
There you will find something like "XX_epad" in the middle of that very long string. In which XX = your tablet's SKU. It can be US, WW, TW, etc.
Sorry, I don't have my tablet in my hands. Cannot get you a screenshot. I am sure there's some around the forum.
Let me know if you can find it
macaumen said:
Settings --> About tablet --> Build number
There you will find something like "XX_epad" in the middle of that very long string. In which XX = your tablet's SKU. It can be US, WW, TW, etc.
Sorry, I don't have my tablet in my hands. Cannot get you a screenshot. I am sure there's some around the forum.
Let me know if you can find it
Click to expand...
Click to collapse
Awesome i see its the US version. I have found it on Asus website. Now one more thing and this may sound stupid. I see it says put it in adb/fastboot. where is that exactly haha thanks again
Oh wait, I guess you haven't unlocked the infinity yet. Fastboot is available only after unlocking. I haven't unlocked mine, so I am not very familiar with that.
Using adb connecting to your tablet through command prompt is essentially the same as running terminal emulator on the tablet. I guess you should be familiar with adb as you hacked many phones already.
You know what. I heard that the unlock tool also works in JB for TF300T. I guess it should be working on TF700T with JB also. You can try it first before downgrading.
You can try this guide to downgrade to .30. Just download the .30 file instead of .22 stated in the post.
http://forum.xda-developers.com/showthread.php?t=1803343
I looked at "About tablet" and the only thing that I can see that may tell me ROM version is the build number. It says IML74K.US_epad-9.4.5.22-20120615.
thanks
mrjayviper said:
I looked at "About tablet" and the only thing that I can see that may tell me ROM version is the build number. It says IML74K.US_epad-9.4.5.22-20120615.
Click to expand...
Click to collapse
Yes, that's it. You can still get nvflash access as long as you don't upgrade.
_that said:
Yes, that's it. You can still get nvflash access as long as you don't upgrade.
Click to expand...
Click to collapse
I've searched but I never found steps on how to use those nvflash files. maybe you know?
I'm thinking of updating to JB for now and see that's better than 4.0.3
edit: seems problem with unlocking app anyway. no need to worry about nvflash for now
mrjayviper said:
I've searched but I never found steps on how to use those nvflash files. maybe you know?
I'm thinking of updating to JB for now and see that's better than 4.0.3
edit: seems problem with unlocking app anyway. no need to worry about nvflash for now
Click to expand...
Click to collapse
It's shame you can't unlock to have NVflash backup. Any how JB is definitely better (specially version .20).
Just bought a TF700 from Amazon (much cheaper in the States than where i live) but got a few questions:
(a) Its still on ICS and I suspect that i will end up installing custom roms etc as I have done with my GS2. I read that i should before i root or unlock bootloder i should backup using NVflash (i think mine is pre 30) but does that prevent me from going to JB or does it not matter?
(b) I use wifi channel 13 at home, but i know my tablet as i bought in US probably has wifi channels 1 to 11. How can i change the wifi to include up to channel 13?
(c) Are there any other diff between a US version of TF700 and a WW version? I note that on the Asus website they have different firmwares.
Thanks!
blion said:
Just bought a TF700 from Amazon (much cheaper in the States than where i live) but got a few questions.
Are there any other diff between a US version of TF700 and a WW version? I note that on the Asus website they have different firmwares.
Thanks!
Click to expand...
Click to collapse
It is possible to convert your tab to the World Wide or other appropriate firmware by a reflash.
Do you know how this is accomplished?
If not post back and we can guide you.
Also I'm not sure about the wifi channel change, yet there there is most likely a way to change that.
The way to change the WiFi is via a build.prop text edit hack. It's as simple as changing the country code from US to GB
You must be at least rooted to do it. Of course if you take an nvflash blob copy then unlock the world is your oyster! :victory:
Thats OK said:
It is possible to convert your tab to the World Wide or other appropriate firmware by a reflash.
Do you know how this is accomplished?
If not post back and we can guide you.
Also I'm not sure about the wifi channel change, yet there there is most likely a way to change that.
Click to expand...
Click to collapse
Sorry but I dont know how to convert it to a WW. Would appreciate it if you could let me know!
Do you know what are the difference between a US and WW firmware other than the Wifi channel??
Also do you know the answer to my question (a)? I want to update to JB but worried i wont be able to after using NVflash.....
sbdags said:
The way to change the WiFi is via a build.prop text edit hack. It's as simple as changing the country code from US to GB
You must be at least rooted to do it. Of course if you take an nvflash blob copy then unlock the world is your oyster! :victory:
Click to expand...
Click to collapse
Thanks but could you provide more info on how to edit build.prop??
I will try and root tonight. Can you explain what is an nvflash blob copy??? I come from using GS2 where there was not a need to unlock the bootloader but i read that unlocking the bootloader (and therefore losing warranty) is required in order to install a custom rom.
blion said:
Thanks but could you provide more info on how to edit build.prop??
I will try and root tonight. Can you explain what is an nvflash blob copy??? I come from using GS2 where there was not a need to unlock the bootloader but i read that unlocking the bootloader (and therefore losing warranty) is required in order to install a custom rom.
Click to expand...
Click to collapse
Doing the nvflash thing will in no way stop you updating to jellybean however updating to jellybean will stop you doing the nvflash thing. Nvfash is security nothing more. You can recover from any bricks after you do it.
As for gaining root and editing build.prop I would suggest you read the stickies in the general forum. Think about unlocking and flashing a custom rom if you are not comfortable doing the edits yourself as it's all too easy to get into a bootloop (recoverable) if you don't know what you are doing.
Do you know what are the difference between a US and WW firmware other than the Wifi channel??
Hi, I have a tf700 that I bought from the US and I live in the UK, I have always used US firmware and have never had a problem with wifi.
maxal said:
Do you know what are the difference between a US and WW firmware other than the Wifi channel??
Hi, I have a tf700 that I bought from the US and I live in the UK, I have always used US firmware and have never had a problem with wifi.
Click to expand...
Click to collapse
You won't but if you set your UK wifi router to use channel 13 you will Your US infinity won' see it. To fix you flash a WW rom or do the build prop edit and it will work again.
As for other differences I'm yet to find any yet. Other than wifi they both behave the same way.
maxal said:
Do you know what are the difference between a US and WW firmware other than the Wifi channel??
Click to expand...
Click to collapse
AFAIK, the list of included system apps is slightly different, and also the other apps are at least recompiled for each country version.
Good news......confirmed my new tab is 9.4.5.26 version which i think will enable me to use NVflash!!
I want to try Cleanrom and want to make sure i get this absolutely correct (i dun wanna brick my new tf700!!!).
(a) Follow the guide to backup using NVflash (http://androidroot.mobi/t3_nvflash/)
(b) Install the official asus 4.1.1 bootloader (current version seems to be V10.4.4.23)
(c) Install TWRP 2.3.1.0 (follow this guide http://forum.xda-developers.com/showthread.php?t=1938129)
(d) Do i still need to install SuperSU or can I go to install Cleanrom directly??
Is there anything i should be mindful of before flashing??
Thanks in advance!!!!
blion said:
Good news......confirmed my new tab is 9.4.5.26 version which i think will enable me to use NVflash!!
I want to try Cleanrom and want to make sure i get this absolutely correct (i dun wanna brick my new tf700!!!).
(a) Follow the guide to backup using NVflash (http://androidroot.mobi/t3_nvflash/)
(b) Install the official asus 4.1.1 bootloader (current version seems to be V10.4.4.23)
(c) Install TWRP 2.3.1.0 (follow this guide http://forum.xda-developers.com/showthread.php?t=1938129)
(d) Do i still need to install SuperSU or can I go to install Cleanrom directly??
Is there anything i should be mindful of before flashing??
Thanks in advance!!!!
Click to expand...
Click to collapse
You'll need to unlock it at some point too
SuperSu is included in CleanROM so not needed.
It's all very straight forward and remember because you are coming from Stock you won't need to do a full wipe.
sbdags said:
You'll need to unlock it at some point too
SuperSu is included in CleanROM so not needed.
It's all very straight forward and remember because you are coming from Stock you won't need to do a full wipe.
Click to expand...
Click to collapse
Thanks! Ops forgot about unlock. Will unlock, backup NVflash, install asus bootloader, TWRP and then insall cleanrom???
Lastly, should i install odex or deodex version of cleanrom??? The verdict seems to be split.....not sure what practical difference there is between the two..............
blion said:
Thanks! Ops forgot about unlock. Will unlock, backup NVflash, install asus bootloader, TWRP and then insall cleanrom???
Lastly, should i install odex or deodex version of cleanrom??? The verdict seems to be split.....not sure what practical difference there is between the two..............
Click to expand...
Click to collapse
I'd start with the deodex version but they are so close to each other and easy to switch between. Try them both. You don't lose any apps or data by switching between the two as same base.