[Q] 8010 Route back to official firmware? - Galaxy Note 10.1 Q&A, Help & Troubleshooting

I have the Jelly Bean 8013 German 4.1.1 rom By: smaw51 on my UK n8010 but want to go back to using the Samsung UK officials stock jellybean rom firmware release so my question is do I have to go back to official ICS (ice cream sandwich) using PC Odin [Method 2 - ClockworkMod Recovery] By: OP, before using kies to download the official firmware OR is there a official UK jellybean 4.1.1 custom ROM, by a kind XDA member, I can flash using Odin to save me having to go back to ICS first?
thanks

Factory reset phone .
Flash stock4.1.1 rom via odin
Page 1
http://forum.xda-developers.com/showthread.php?t=2016792
jje

JJEgan said:
Factory reset phone .
Flash stock4.1.1 rom via odin
Page 1
http://forum.xda-developers.com/showthread.php?t=2016792
jje
Click to expand...
Click to collapse
Guess i loss my programs and data this way?
I was able to successfully use your method but needed to do a restore all my apps and data via Titanium pro, no biggie. And you now using the correct UK version of jellybean 4.1.1. so thanks guys

The way i did it is as follows.
When i bought my tab i rooted and did a backup with CWM
I than updated to CM 10.1 and when i wanted to go back to stock i just restored the backup CWM.
Seems to have worked out for me.

Related

P3100 Sammobile German JB OTA ?

Hi,
I'm puzzled noone has tried this so I'm thinking for some reason this might be impossible or a bad idea. Looking at sammobile, there are two OTA files which if applied in succession should upgrade 4.0.3 ICS with P3100XXALD4 to 4.1.1 JB with P3100XXCLI5. Both of these are German.
Now some background - as you can imagine I have P3100XXALD4 and I'm noob with Samsung phones...
I have rooted P3100 with CWM. What I wanted to try is:
- Make CWM backup.
- Make Titanium Backup.
- Restore stock recovery using ADB ( BTW where can I find it ? )
- Copy OTA to SD Card, apply it, restart.
- Copy second OTA to SD Card, apply it, restart.
- Root again ( how ? will root for 4.0.4 work for JB ? I suppose not ? )
- Install CWM.
If something goes wrong, I can use backup to revert to original state... I guess - if I manage to flash it again ?
Am I terribly wrong ?
[EDIT] It looks like Mobile Odin pro might do the trick - it can flash OTA and it can preserve root ?
I have the same version, P3100XXALD4 and I've never got any updates via Kies or OTA. I'm starting to belive that flashing is the only way for this firmware...
zljk said:
Hi,
I'm puzzled noone has tried this so I'm thinking for some reason this might be impossible or a bad idea. Looking at sammobile, there are two OTA files which if applied in succession should upgrade 4.0.3 ICS with P3100XXALD4 to 4.1.1 JB with P3100XXCLI5. Both of these are German.
Now some background - as you can imagine I have P3100XXALD4 and I'm noob with Samsung phones...
I have rooted P3100 with CWM. What I wanted to try is:
- Make CWM backup.
- Make Titanium Backup.
- Restore stock recovery using ADB ( BTW where can I find it ? )
- Copy OTA to SD Card, apply it, restart.
- Copy second OTA to SD Card, apply it, restart.
- Root again ( how ? will root for 4.0.4 work for JB ? I suppose not ? )
- Install CWM.
If something goes wrong, I can use backup to revert to original state... I guess - if I manage to flash it again ?
Am I terribly wrong ?
[EDIT] It looks like Mobile Odin pro might do the trick - it can flash OTA and it can preserve root ?
Click to expand...
Click to collapse
The German Ota is not a definite release and may have some bugs.
I recommend to flash the latest Vodaphone firmare which works very well.
Backup your data (Titanium) and your rom (nandroid backup with Cwm). Flash the new firmware with mobile Odin (full wipe, ever root and SU enabled).
Enjoy your rooted Jelly Bean. Restore your apps (only user apps is better) and, if you need it again, flash Cwm with mobile Odin.
Sent from my GT-P3100 using xda app-developers app
There is a official 4.1.1 for the P3100 over at SamMobile - (PDA) P3100BUCLK1 (CSC) P3100VFGCLK1. This release is for Slovenia.
I've flashed this using Odin with a full wipe over my 4.0.4 and everything's working without any problem.
Try this out and enjoy the official release.
greeny2010 said:
There is a official 4.1.1 for the P3100 over at SamMobile - (PDA) P3100BUCLK1 (CSC) P3100VFGCLK1. This release is for Slovenia.
I've flashed this using Odin with a full wipe over my 4.0.4 and everything's working without any problem.
Try this out and enjoy the official release.
Click to expand...
Click to collapse
Can we not have the Tablet UI in 4.1.1 this Phone Interface is horrible.

[Q][P5100] How can I update my Tablet from JB OTA Leak to Samsung Official JB 4.1.1?

Anybody can help me? i want to use the latest samsung official release of JB 4.1.1 in the Philiphines and update it tru KIES
Before i flashed it the OTA Leaked JB P5100XXCLI1 thru Odin and im using it right now and it have also a root access
And now samsung offiicialy releases the JB update and i see it in Sammobile - P5100XXCLL2
Do i need to downgrade first my tablet to ICS to perform upgrade of this official JB?
Or can i flashed it directly the update thru Mobile Odin without downgrading my tablet?
Thank you in Advance developers.
Some one can help me guys
update to jb 4.1.1
robtoman said:
Anybody can help me? i want to use the latest samsung official release of JB 4.1.1 in the Philiphines and update it tru KIES
Before i flashed it the OTA Leaked JB P5100XXCLI1 thru Odin and im using it right now and it have also a root access
And now samsung offiicialy releases the JB update and i see it in Sammobile - P5100XXCLL2
Do i need to downgrade first my tablet to ICS to perform upgrade of this official JB?
Or can i flashed it directly the update thru Mobile Odin without downgrading my tablet?
Thank you in Advance developers.
Click to expand...
Click to collapse
Hi I downloaded the new official jb 4.1.1 and mobile odin to my tablet Galaxy tab 2 7.0 work great
You flashed it tru mobile odin? Did you lose your data after flashing it? Did u flashed it from stock ics to jb?thanks
Do backup from CWM and then mobile ODIN the stock jb. You wont loose any data but to be safe BACKUP !!!!!!!
It will flash the kernel only mobile odin wont erase data
robtoman said:
You flashed it tru mobile odin? Did you lose your data after flashing it? Did u flashed it from stock ics to jb?thanks
Click to expand...
Click to collapse
You do not lose your data stored into sdcard or ext-sdcard

Help with returning Galaxy Note 10.1 to Stock.

Okay here is the long drawn out story....
Got impatient for JB 4.1.2 to roll out and flashed the German GT-N-8010 4.1.1 onto device....ran great.
Now I want to get my device back to GT-N8013 4.1.2. so here is what I've done.
Flashed via Odin ICS 4.0.4, then rooted installed triangle reset device.
Now first I tried to flash KIES_HOME_N8013UEUCMA3_N8013XARCMA3_813049_REV00_user_low_ship.tar.md5 however everytime I flash it via Odin it fails and I have to go back to 4.0.4 KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 Now when I check my status after reflashing 4.0.4 I'm back to custom custom instead of all stock????
So now I tried this....I flashed 4.0.4, rooted, triangled and checked status...all was back to stock. Re-flashed 4.0.4 to kill the root, when I registered for software updates it tells me I'm custom and cannot get updates????
What am I doing wrong? I'm beyond frustrated right now. I have the latest ROM's but I cannot flash via Odin 4.1.2 as it fails everytime. How do I get this done and back to stock running 4.1.2 Please someone guide me like I'm 4
Stump3r said:
Okay here is the long drawn out story....
Got impatient for JB 4.1.2 to roll out and flashed the German GT-N-8010 4.1.1 onto device....ran great.
Now I want to get my device back to GT-N8013 4.1.2. so here is what I've done.
Flashed via Odin ICS 4.0.4, then rooted installed triangle reset device.
Now first I tried to flash KIES_HOME_N8013UEUCMA3_N8013XARCMA3_813049_REV00_user_low_ship.tar.md5 however everytime I flash it via Odin it fails and I have to go back to 4.0.4 KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 Now when I check my status after reflashing 4.0.4 I'm back to custom custom instead of all stock????
So now I tried this....I flashed 4.0.4, rooted, triangled and checked status...all was back to stock. Re-flashed 4.0.4 to kill the root, when I registered for software updates it tells me I'm custom and cannot get updates????
What am I doing wrong? I'm beyond frustrated right now. I have the latest ROM's but I cannot flash via Odin 4.1.2 as it fails everytime. How do I get this done and back to stock running 4.1.2 Please someone guide me like I'm 4
Click to expand...
Click to collapse
To my knowledge :
0- full reset and wipe cache
1- root your device
2- install samsung galaxy s CSC and use it to change your CSC to your country or the one you want to get updates from
3- triangle away to make sure to rest the counter
4- download the firmware you need again , maybe from another server and make sure it is fully downloaded
5- try it with another version of odin , and make sure to turn kies off ,and make sure you have latest drivers installed .
asalah0923 said:
To my knowledge :
0- full reset and wipe cache
1- root your device
2- install samsung galaxy s CSC and use it to change your CSC to your country or the one you want to get updates from
3- triangle away to make sure to rest the counter
4- download the firmware you need again , maybe from another server and make sure it is fully downloaded
5- try it with another version of odin , and make sure to turn kies off ,and make sure you have latest drivers installed .
Click to expand...
Click to collapse
Why do you need to change the CSC? E.g. I'm using UK stock JB ROM deodexed, does it mean the region has been changed to the UK? Where else can I download the firmware? I'm in Malaysia and can't find the firmware for download.
had the same scenario....german 4.1.1.....i downgraded to the official 4.0.4 (had to wipe cash and restore device during that process as it got stuck at logo)....then rooted, triangle away, all was stock......then waited for ota update.....nd now i have 4.1.2 all stock

[Q] n8010 uk's stock recovery

hi,
i flashed my tab to try the 4.1.2 us version and it changed my device name to n8013, i have a uk n8010, now i flashed it back to stock 4.0.4 using odin and the stock uk rom from samfirmware, however my device is still at 8013 and gives me binary counts too, and also i cant get no ota updates
i used triangle away and i am left with one count,
all i can guess is that i still have the n8013 stock recovery
i need n8010 uk stock recovery
could any one help me out with this please
ashvirk said:
hi,
i flashed my tab to try the 4.1.2 us version and it changed my device name to n8013, i have a uk n8010, now i flashed it back to stock 4.0.4 using odin and the stock uk rom from samfirmware, however my device is still at 8013 and gives me binary counts too, and also i cant get no ota updates
i used triangle away and i am left with one count,
all i can guess is that i still have the n8013 stock recovery
i need n8010 uk stock recovery
could any one help me out with this please
Click to expand...
Click to collapse
See your identical post .
Hi. As i said before i have flashed the official stock n8010 rom after triangle away and its still showing custom binary. There is a way to flash stock recovery using odin. And stock recovery is different for different models
Sent from my Nexus 4 using XDA Premium HD app
ashvirk said:
Hi. As i said before i have flashed the official stock n8010 rom after triangle away and its still showing custom binary. There is a way to flash stock recovery using odin. And stock recovery is different for different models
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
RUN TA rom counter zero .
Flash stock rom via Odin.
Factory reset .
Check three rom status indications are ok .
Stock recovery is identical and part of the stock firmware 8010 is 8013 .
jje
Hi. Done as u said. Still when i switch to odin mode my tab name is n8013. With counter set to 1 and the firmware is shown a custom even thou its an official one.
This problem only occurred after i installed a n8013 4.1.2 official rom. Before that flashing with odin never changed any thing. Could u please confirm if u have a n8010 that when in recovery mode. Which version recovery is on the top. Mine is 3e. I really confused with this. I tried what u adviced 3 times tried it with 2 different official roms. One from sammobile and one from samsung ota itself. The tab updates is on 4.0.4 official rom via ota.but if i check updates on 4.1.1 after the official update it says that my tab has been modified and i cant update.
Sent from my Nexus 4 using XDA Premium HD app
3e is stock recovery .
tab name
???
this is Note forum are you using Tab firmware ???
jje
Hi. Thanks for a quick reply. I got a n8010. But its device name on idin mode is n8013 since i flashed n8013 rom please read by posts before this one. I have elaborated on whole situation. I couldn't manage to get the device name back to 8010 and binary counter to zero. That's what i need help with. All the roms i used were official. However this problem only happened after i used n8013 official 4.1.2
Sent from my Nexus 4 using XDA Premium HD app

[Q] n8010 - how to get back to stock after flashing the n8000 4.4.2 leak ?

I flashed my stock unrooted n8010 with the n8000 leak files using odin, I did not used the modem. All good and everything working.
Now I want to get back to stock n8010 jb. When in download mode the device apears like n8000 and odin is not able to flash the stock n8010 firmware.
I installed twrp and rooted, modified buildprop to apear like n8010 and tried to flash a custom rom for n8010, no luck, I get a message that the rom is for n8010 and to try a rom for my device.
How can I trick twrp or odin to make them flash n8010 fw/rom ?
I don't have a nandroid backup,
Edit : I managed to flash 4.0.4 with odin (N8010XXALGC_N8010OXXALG4_COA). After the flash it was stuck at samsung logo, I rebooted in recovery (power+volume up, release only power at samsung...) and wiped cache, wiped data and reset. Now the device booted with android 4.0.4 and I'm downloading a 568.29 MB update. I'll see what happends next...
The goal is to get back to stock jb, official (with triangle away I gues)
Edit: I updated to JB, but when in download mode the device is still N8000, so the problem is still not solved.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
I flashed my stock unrooted n8010 with the n8000 leak files using odin, I did not used the modem. All good and everything working.
Now I want to get back to stock n8010 jb. When in download mode the device apears like n8000 and odin is not able to flash the stock n8010 firmware.
I installed twrp and rooted, modified buildprop to apear like n8010 and tried to flash a custom rom for n8010, no luck, I get a message that the rom is for n8010 and to try a rom for my device.
How can I trick twrp or odin to make them flash n8010 fw/rom ?
I don't have a nandroid backup,
Edit : I managed to flash 4.0.4 with odin (N8010XXALGC_N8010OXXALG4_COA). After the flash it was stuck at samsung logo, I rebooted in recovery (power+volume up, release only power at samsung...) and wiped cache, wiped data and reset. Now the device booted with android 4.0.4 and I'm downloading a 568.29 MB update. I'll see what happends next...
The goal is to get back to stock jb, official (with triangle away I gues)
Edit: I updated to JB, but when in download mode the device is still N8000, so the problem is still not solved.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
What version of Odin are you using ?Did you try to remove micro SD and full erase you tablets internal memory card? And why not 4.1.2 you install and not 4.0.4?
Because 4.1.2 gives me error, tried 3 versions of Odin: 3.04, 3.09, and 1.85. Tried 4.1.2 from 3 different sources to avoid a bad download. I can only flash 4.0.4, android shows me n8010 but in download mode is still n8000. I have no idea why, I just can't get rid of the n8000 in download mode.
Maybe I need to flash separate files, just like I did with 4.4.2, bootloader. Ap , csc but I don't know where to get those files for 4.1.2, I only have .tar.md5 files.
I attached a ss with odin eror when trying to flash stock 4.1.2
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Because 4.1.2 gives me error, tried 3 versions of Odin: 3.04, 3.09, and 1.85. Tried 4.1.2 from 3 different sources to avoid a bad download. I can only flash 4.0.4, android shows me n8010 but in download mode is still n8000. I have no idea why, I just can't get rid of the n8000 in download mode.
Maybe I need to flash separate files, just like I did with 4.4.2, bootloader. Ap , csc but I don't know where to get those files for 4.1.2, I only have .tar.md5 files.
I attached a ss with odin eror when trying to flash stock 4.1.2
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Did you have success installing the bootloader of the leak kitkat rom? Cause mine failed always, the AP file is the 1 working on me only. I have downloaded this TAR_MD5_PACKAGER here( http://forum.xda-developers.com/showpost.php?p=42393470&postcount=2 ) that I'm using to repack the stock and using 7zip to extract the content of the .tar.md5 files, maybe you can try repacking it seperately using this 2 program. And try to install it using Odin( I'm using Odin 1.85). By the way you can still install custom 4.1.2 rom's right, specifically for 8010 ? Lastly why do you wanna go back to stock 4.1.2 do you have problem with the leak rom?
P.S. Did you format your internal memory as I suggested? Cause once I install back to 4.1.2 have error before and have to install twice the rom( that is according to my experience which some think its not relate to installing error).maybe you can try to format all from the system to the internal memory via CWM recovery /mount section.Then try to install again and remove the SD card too.
I had no problems with the kit Kat files, flashed at the same time bl, csc and ap (no modem). I used odin 3.09. I managed to get back to 4.1.2 by flashing stock 4.0.4 then using OTA (im surprised it worked) . Someone else flashed directly 4.1.2 with mobile odin and worked, but with odin from pc you get an error.
The problem is that in download mode appears like n8000; hopefully, when official kk for n8010 is out we'll be able to fix that.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
I had no problems with the kit Kat files, flashed at the same time bl, csc and ap (no modem). I used odin 3.09. I managed to get back to 4.1.2 by flashing stock 4.0.4 then using OTA (im surprised it worked) . Someone else flashed directly 4.1.2 with mobile odin and worked, but with odin from pc you get an error.
The problem is that in download mode appears like n8000; hopefully, when official kk for n8010 is out we'll be able to fix that.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Glad you manage to resolve some of your problem.Plese ignore my post above your's then.
The problem is not solved lol. I just gave up for the moment. It's a miracle that I didn't bricked the damn thing today
I'll stay with a 4.1.2 stock n8010 fw that is using an n8000 4.4.2 bootloader. Sexy
Sent from my GT-N8010 using Tapatalk
Well from everything I've read it seems the problem is that when we flashed the kitkat leak, flashing the bootloader is what allowed us to flash n8000 over our n8010. This could be why when we flash back using odin we get the error cause the bootloader isn't being flashed too so it's trying to flash n8010 onto what it reads as n8000. It seems that there are only a few solutions. 1we need to find a n8010 bootloader file which so far seems to be impossible to find. 2you can flash an original n8010 cmw or twrp back up it will return you to 4.1.2 n8010 but the bootloader will still be n8000. If this option isn't available to you then you can try 3 download a custom rom I have the darkmans customers stock as a backup and it still works going back to simple stock n 8010 but again the bootloader stays as n8000...
Basically until we can get an n8010 bootloader we are stuck with it...
I even rooted the 4.4.2 leak and tried to flash a custom 4.4.2 made for n8010 and did not let me (based on the same leak i think, so the same bootloader) and failed, twrp sees the device as n8000 and did not allowed me to use n8010 rom.
KoRoZIV said:
I even rooted the 4.4.2 leak and tried to flash a custom 4.4.2 made for n8010 and did not let me (based on the same leak i think, so the same bootloader) and failed, twrp sees the device as n8000 and did not allowed me to use n8010 rom.
Click to expand...
Click to collapse
I think I read somewhere that twrp can have issues with flashing 4.4.2 roms it needs to be the most up to date version of twrp... I tried cm 11 before and had to change to Cwm. But I went back to twrp and now it works
I used twrp 2.7, I think it's the latest.
Edit:
I reached a binary counter of 118
I used triangle away and reset it, however I'm still stuck with the n8000 4.4.2 bootloader.
N8000 bootloader
Same issue here, stuck on N8000 bootloader on my GT-N8010. After endless research I still can't find any solution but now the thing is, the official 4.4.2 KK is availble for the GT-8010, you guys think this is the solution, because I have read that though updating to the official Rom (via Odin Mobile) because Odin desktop fails, the device would still be stuck on the annoying N8000 bootloader?
Yes, even if you flash the n8010 4.4.2 with mobile Odin you will still have the damn n8000 bootloader.
Sent from my Nexus 5 using Tapatalk
KoRoZIV said:
Yes, even if you flash the n8010 4.4.2 with mobile Odin you will still have the damn n8000 bootloader.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Any way of downgrading the Bootloader, I've heard of a nandroid backup but I didn't do that before updating, is it possible to find one on the web?
You need a nandroid from a similar device, is possible but not sure if it will solve the problem.
Sent from my Nexus 5 using Tapatalk
KoRoZIV said:
You need a nandroid from a similar device, is possible but not sure if it will solve the problem.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I thought the official Rom would fix this but visibly no. So we don't have a choice of being stuck with the damn N8000 bootloader?
At the moment there is no solution that I know of.
Sent from my Nexus 5 using Tapatalk
N8010 on N8000 bootloader
Hi guys, isn't there a solution about this yet? I have the exact same problem with the N8000 bootloader, my device is a N8010 16GB from mexico and flashed the leaked N8000 kk stock rom. I will still look for a solution. TKS to all of you.
Mean time solution
Hi Guys, I found a way to flash te new N8010XXUDNE4 on the stuck n8000 bootlader, the bootloader problem remains, but it is possible to flash the n8010 stock rom via mobile odin, I did it and it's fully working, But I flashed a N8010XXUDNE4 customized without sboot.bin so it can be flashed via PC odin too, I'm still not allowed to post links here cause I'm new in forums so if you want the link to that rom let me know how to provide it to you.
Possible solution?
Have a look at my thread, does that look a viable approach?
http://forum.xda-developers.com/galaxy-note-10-1/help/recovering-n8010-leaked-locked-n8000-t2802516
ambmar78 said:
Hi Guys, I found a way to flash te new N8010XXUDNE4 on the stuck n8000 bootlader, the bootloader problem remains, but it is possible to flash the n8010 stock rom via mobile odin, I did it and it's fully working, But I flashed a N8010XXUDNE4 customized without sboot.bin so it can be flashed via PC odin too, I'm still not allowed to post links here cause I'm new in forums so if you want the link to that rom let me know how to provide it to you.
Click to expand...
Click to collapse

Categories

Resources