Code:
/*
* Your warranty might get void if you root.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Mod Warning: Please do not use this on the newly released version 2 devices....it may brick your device.
Guidelines
Please read through all the pages of this thread. Do NOT ask questions which has been asked or answered earlier. Wait for a while for the answer before reposting the same thing. Do NOT quote the First Post.
Do NOT Private Message me(ankitdaruler) or Fuser-Invent. Ask your question in the thread so that the solutions can help other people fix similar issues.
If you cannot follow the guidelines mentioned above this thread will be closed and hence there won't be any progress in the development for these devices.
Official Karbonn Smart Tab 8 Thread
Official Karbonn Smart Tab 10 Thread
Karbonn Smart Tab 8 & 10 Stock Plus Rom V1.2 & Karbonn Custom v 1.0.1 Rom by Fuser Invent
To install:-
Stock Plus ROM
•Copy the zip to your SD Card.
•Boot into Stock Recovery
•Factory Reset the tab
•Apply update through Ext
•Select the Karbonn Stock Plus zip
•After completion Reboot system now.
Karbonn Custom ROM v 1.0.1
•Install TWRP recovery
•Boot into TWRP
•Copy the .zip over to your SD card
•Factory reset your tablet
•Flash the zip
•If you want to switch SD with Internal, flash crystal_clear_v1.5_sd_switch.zip
•Reboot System Now
Features are listed in the particular thread.
Stock ROM v 1.2 for ST8 & ST10
Custom ROM v 1.0.1 for ST8 and ST10
Karbonn Stock ROM Plus v1.1 by Fuser-Invent for Smart Tab 10
It has been mainly made for people who have bricked their Smart Tab 10's(can save you from sending the tab to the Service Centre) but others can also use it as it will enhance the usability and speed of the device.
Features:-
i)It's the Modified Stock ROM which is flashable through Stock Recvoery.
ii)Bloatware Removed.
iii)Init.d Tweaks enabled.
iv)Governor Tweaks added.
v)Touch Screen Tweaks added.
vi)Much faster than the Stock ROM. More Internal Memory and RAM available.
vii)Runs HD Games much smoother.
viii)Pre-Rooted.
ix)Internal External Memory Swapped.
x)Much efficient in Battery handling.
To install:
i)Copy the zip to your SD Card.
ii)Factory Reset the tab
iii)Apply update through Ext
iv)Select the Karbonn Stock Plus zip
v)After completion Reboot system now.
Download
TWRP for Smart Tab 8 & 10 by Ozadroid
TWRP or TeamWin Recovery Project is a Custom Built Recovery similar to ClockworkMod but with touch functionalities.
Download
Rooting
Download the Crystal_Root.zip from here and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Crystal, Power Off and remove the charger cable.
Insert the microSD card into your Crystal
Get into Recovery mode.
In the recovery you can move with the Volume- button, you can select with Power or Volume+
Select the apply update from EXT option
Select the Crystal_Root.zip, this will install the package
Wait for the update to finish
Select reboot system now
This is a tried and tested method and has worked for everyone till now.
Swapping External to Internal Memory
The fact that our devices have only 1.51 GB of Internal Storage limits the capabilities of our devices. Especially with HD Games. But after swapping this won't be a problem anymore.
Download the file Vold.rar from here.
Extract the file vold.fstab and paste it to your SD Card.
Now with ES Explorer Mount RW as writable and tick up to root(You have to root and have to know how to move into root).
You should now be able to access the root.
Copy the vold.fstab from Sd card.
Press back and paste it in system\etc.
It will ask you to overwrite. Allow it to do so.
Reboot.
I myself have tried it and it worked wonderfully.
That's it. Enjoy HD games now.
Lag-free Tweak
Install SetCPU app
Download the file Setcpu.txt from here
Paste it into the root of your SD Card
Open SetCPU, first change the governor from "conservative" to "performance2"(This is the most important thing)
Click on options button(three dots) and then click Device Selection
Select Custom Frequencies
Now Set Min frequency to 48 MHz and Max frequency to anything according to your preference(Now you'll have the choice of setting the frequency upto 1.5 GHz)
When you wan't to conserve more battery lower the Max Frequency(while browsing or listening to music maybe) and when playing HD games up the Max Frequency(Most games will run perfectly with even 1200 MHz)
Note:-48MHz of Min frequency will give more battery in in standby mode.
And now you call play games like Dead Trigger on Ultra High graphics settings without lag on 1.4 or 1.5 GHz.
Try not to Clock the CPU above 1.2 GHz for a long time as it could cause heat issues. The governor itself should speedup everything for you.
Enjoy.
Working/ Not Working HD Games List
ankitdaruler said:
Ok so now that you've read the disclaimer I'd like you to know that I have only discovered the rooting technique for our ST8 & ST10. It was actually made for Ainol Crystal but with my research and knowledge I realized that it should work for our devices as well. This thread is to keep all developments for ST8 & ST10 at a single place.
Click to expand...
Click to collapse
Are you working on boot recovery (CWM or TWRP) for these devices? You have given a great start. Now lets keep the momentum on.
regards
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
chipwizz said:
Are you working on boot recovery (CWM or TWRP) for these devices? You have given a great start. Now lets keep the momentum on.
regards
Click to expand...
Click to collapse
I'm working on CWM Recovery. Will upload tomorrow.
Sent from my ST10 using Tapatalk HD
---------- Post added 19th January 2013 at 12:31 AM ---------- Previous post was 18th January 2013 at 11:44 PM ----------
I uploaded the Recovery for ST10 Cosmic here http://forum.xda-developers.com/showthread.php?p=36881482
Haven't tested it on ST8 yet. Don't know if it will work.
mushipkw said:
I'm working on CWM Recovery. Will upload tomorrow.
Sent from my ST10 using Tapatalk HD
---------- Post added 19th January 2013 at 12:31 AM ---------- Previous post was 18th January 2013 at 11:44 PM ----------
I uploaded the Recovery for ST10 Cosmic here http://forum.xda-developers.com/showthread.php?p=36881482
Haven't tested it on ST8 yet. Don't know if it will work.
Click to expand...
Click to collapse
Great thing really. :good:..Anyways any bugs which remains in the CWM??
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
mushipkw said:
I'm working on CWM Recovery. Will upload tomorrow.
Sent from my ST10 using Tapatalk HD
---------- Post added 19th January 2013 at 12:31 AM ---------- Previous post was 18th January 2013 at 11:44 PM ----------
I uploaded the Recovery for ST10 Cosmic here http://forum.xda-developers.com/showthread.php?p=36881482
Haven't tested it on ST8 yet. Don't know if it will work.
Click to expand...
Click to collapse
Cool. Quite fast intact. Will be testing it tomorrow.
Sent from my GT-N7000 using Tapatalk 2
memory swapping
Great i hve swappe4d the memory to my 16 gb ext memory and it is wrkig.Now how to swap it back to the internal sd card memory?
venganan said:
Great i hve swappe4d the memory to my 16 gb ext memory and it is wrkig.Now how to swap it back to the internal sd card memory?
Click to expand...
Click to collapse
Download the file in the attachments and replace the earlier file using the same method.
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
ankitdaruler said:
Download the file in the attachments and replace the earlier file using the same method.
Click to expand...
Click to collapse
Hey Ankit, great breakthrough on rooting front. There is cwm recovery posted by mushi, but looks like there is problem. It is not getting flashed. May be its not signed properly. Can you please look at it. since your rooting zip was properly signed can I request you to sign cwm zip posted by mushi for st10 and share. Thanks in advance.
@mushi, I hope you are OK with it.
Sent from my ST10 using Tapatalk HD
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
Koush opened up recovery building tool.
http://builder.clockworkmod.com/
Sent from my ST10 using Tapatalk HD
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
chipwizz said:
Koush opened up recovery building tool.
http://builder.clockworkmod.com/
Sent from my ST10 using Tapatalk HD
Click to expand...
Click to collapse
Used it, I built the recovery using it. And even signed it but it doesn't work.
Sent from my GT-I9300 using xda premium
mushipkw said:
Used it, I built the recovery using it. And even signed it but it doesn't work.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's not signed and it is not even a flashable zip(It doesn't have the updater script n all). So quite obviously it won't work. What is to be done is the recovery.img file is to be flashed back in the device.
I have made the CWM Recovery using Recovery Builder, made the update zip and signed it too. So can anyone just please test it by flashing it through stock recovery. My tab is not with me right now. So please let me know whether it's working or not so that I can release it officially. Download the zip from the attachment.
Guys who have tested the CWM please comment over here whether it's working or not.
Re: Karbonn Smart Tab 8 & 10 Rooting and Memory Swapping
ankitdaruler said:
Guys who have tested the CWM please comment over here whether it's working or not.
Click to expand...
Click to collapse
Ankit, will be testing it tonight after reaching home. Will post feedback if no feedback till that time.
Edit: Tested. Its not working. Package verification not going through...
Regards
Sent from my GT-N7000 using Tapatalk 2
chipwizz said:
Ankit, will be testing it tonight after reaching home. Will post feedback if no feedback till that time.
Edit: Tested. Its not working. Package verification not going through...
Regards
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Ya even I tested it. Same thing. But don't worry I will keep trying. The zip is not getting signed correctly it seems.
ankitdaruler said:
Ya even I tested it. Same thing. But don't worry I will keep trying. The zip is not getting signed correctly it seems.
Click to expand...
Click to collapse
Yeh.. I know, you will not give up
I have started looking similar tablets having recoveries in place.
So this one's perfectly signed. Download from attachment.
Guys just bought this tab yesterday rooted it successfully and enjoying the awesome features,but is there any way to change the phone UI of our tab to tablet UI?? i really dont like the phone UI for a 8' tab.
Edit: ankit I successfully flashed your zip without any problems now how to enter cwm recovery???
cooldude9119 said:
Guys just bought this tab yesterday rooted it successfully and enjoying the awesome features,but is there any way to change the phone UI of our tab to tablet UI?? i really dont like the phone UI for a 8' tab.
Edit: ankit I successfully flashed your zip without any problems now how to enter cwm recovery???
Click to expand...
Click to collapse
This recovery made using CWM builder isn't working. If we try to get into recovery it'll just hang till we reset the tab. And till now there is no way to change to Tablet UI. Changing the LCD.density will make the device not boot in Android.
To get back your stock recovery download the recovery.img from attachments and flash it back through Android Terminal. It's pretty easy google it.
Please contribute to the following thread by adding the games that you've played on Karbonn ST 8 & 10.
http://forum.xda-developers.com/showthread.php?p=37162533#post37162533
Related
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link: http://www.mediafire.com/?8hj5xqe4j6vpe5z
CWM Recovery: http://www.mediafire.com/?fx1vx993lg1lxkv
Download V2
Download link: http://www.mediafire.com/?fxycl487amxbcpd
screenshots:
http://imageshack.us/photo/my-images/14/img0094vn.jpg/
http://imageshack.us/photo/my-images/692/img0093wkb.jpg/
http://imageshack.us/photo/my-images/401/img0092km.jpg/
http://imageshack.us/photo/my-images/844/img0091hbw.jpg/
And this happens when you drop your tablet: LOLZ
http://imageshack.us/photo/my-images/191/img0096sgn.jpg/
http://imageshack.us/photo/my-images/18/img0095nr.jpg/
Quide for the noobs:
Install the cwm recovery by go into the normal recovery then to install update zip fromsd card en then navigate to the cwm file and then select and click yes after that installed is turn your tablet off and go in the CWM recovery by holding the power and volume up button hold and then let go when you are in the CWM recovery in the CWM recovery navigate through the volume up / down to install zip from sd card ---> choose zip from sd card ---> then choose the ROM you just downloaded and click that then click yes and He will begin will installing after that is done reboot your tablet ENJOY!!!
Greetings Safariking
Require root first
Hi safariking,
I have some experience flashing ICS roms on my Galaxy S, I even started out from scratch when the phone was running an early version of GB. I got it rooted (with a lot of help of reading) however I'm not really sure how to proceed with your instructions on updating my Qware Pro 2 to your custom rom.
First of all, I'm failing to even navigate to the zip file while in normal recovery, I've even tried to rename the file to update.zip...
Could it be that it cannot work when the tablet is not rooted?
I tried to root it a while ago, using Gingerbreak, but somehow that is not compatible with the tablet.
You'd think it easy to find out how to root the device, but I'm kind of ashamed to have to say I'm stuck here...
Can you please give me some hints or links to a website where I can read more about acquiring root access on a Pro 2?
Thanks in advance.
safariking said:
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link: http://www.mediafire.com/?8hj5xqe4j6vpe5z
CWM Recovery: http://www.mediafire.com/?fx1vx993lg1lxkv
Download V2
Download link: http://www.mediafire.com/?fxycl487amxbcpd
screenshots:
http://imageshack.us/photo/my-images/14/img0094vn.jpg/
http://imageshack.us/photo/my-images/692/img0093wkb.jpg/
http://imageshack.us/photo/my-images/401/img0092km.jpg/
http://imageshack.us/photo/my-images/844/img0091hbw.jpg/
And this happens when you drop your tablet: LOLZ
http://imageshack.us/photo/my-images/191/img0096sgn.jpg/
http://imageshack.us/photo/my-images/18/img0095nr.jpg/
Quide for the noobs:
Install the cwm recovery by go into the normal recovery then to install update zip fromsd card en then navigate to the cwm file and then select and click yes after that installed is turn your tablet off and go in the CWM recovery by holding the power and volume up button hold and then let go when you are in the CWM recovery in the CWM recovery navigate through the volume up / down to install zip from sd card ---> choose zip from sd card ---> then choose the ROM you just downloaded and click that then click yes and He will begin will installing after that is done reboot your tablet ENJOY!!!
Greetings Safariking
Click to expand...
Click to collapse
Hi, you probably did not notice my reply because I did not use quote:
Hi safariking,
I have some experience flashing ICS roms on my Galaxy S, I even started out from scratch when the phone was running an early version of GB. I got it rooted (with a lot of help of reading) however I'm not really sure how to proceed with your instructions on updating my Qware Pro 2 to your custom rom.
First of all, I'm failing to even navigate to the zip file while in normal recovery, I've even tried to rename the file to update.zip...
Could it be that it cannot work when the tablet is not rooted?
I tried to root it a while ago, using Gingerbreak, but somehow that is not compatible with the tablet.
You'd think it easy to find out how to root the device, but I'm kind of ashamed to have to say I'm stuck here...
Can you please give me some hints or links to a website where I can read more about acquiring root access on a Pro 2?
Thanks in advance.
It works
Finally got it working.
After I put the zip files on the external SD card I was able to navigate to it and flash CWM and after that your custom rom V2 which is an improvement regarding speed and battery life.
Sofar I'm very happy, thanks!
I've also tried CyanogenMod 7 via fun_'s thread, but neighter the Yarvik rom (touchscreen does not work) nore the Roverpad rom (HD film playback does not work) is a success.
I'm going to try your V1, to see if it makes any difference...
Cheers...
Add ics style and ics buttons
Sent from my GT-i9070 using xda premium
Hi,
I just flashed my pro 2 with this rom and it works OK (only the screen-orientation sensor is behaving strange).
I also wanted to try the stock-rom update from the qware website. I tried the flashprg that came with it but i think buy usinge the cwm recovery i can't use this prg anymore. Do you have a original recovery lying around? (or otherwise have a solution for flashing the original stock-rom). If so i will be thankfull!
Bob.
CoolCatGetHome said:
Add ics style and ics buttons
Sent from my GT-i9070 using xda premium
Click to expand...
Click to collapse
Not Possible!
I think!
This Device has low specs!
safariking said:
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link:
CWM Recovery:
Download V2
Download link:
Greetings Safariking
Click to expand...
Click to collapse
For wich version is this update ???
Will it work 100% on the Qware Tablet PC Pro2 10" ?? (The early version of the QW TB-1010)
I Proudly Present the first Custom Rom available for the Samsung Galaxy Tab 2 10.1 (GT-P5113)
What is this you ask:
This is a slightly modified version of the most current stock ROM available for the Galaxy Tab 2 10.1 (GT-P5113).
Notice for CleanRom v1.0 users:
The update instructions are below the installation instructions. Updating to the newest version will NOT remove any of your settings or data as long as you do not Wipe Data / Factory Reset.
Changlog:
Code:
Version 1.1:
1. Moved Dropbox to Data so it can be removed
2. Removed SuperSU and added Superuser to resolve some issues.
3. Added download containing removed apk files (See details below)
Features so far:
-Stock, Rooted, Deodexed, Zipaligned
-Removed a bunch of bloat applications
-Removed crap bookmarks
That's about it.
Pre-requisites:
1. You must have the custom recovery installed from the Rooting thread. (If you are going to install this you do not have to install the root zip file, this rom is already rooted.)
Installation Instructions: (Update instructions below)
1. Download to external sdcard
2. Reboot to recovery
3. Make a nandroid backup Highly Recommended
4. Data Wipe/Factory Reset REQUIRED for new installations
5. Flash Rom
6. Reboot and enjoy
Update Instructions:
1. Download the latest version to your external sdcard
2. Reboot to recovery
2a. Looks like you may need to wipe data (Some people are reporting issues with Wifi if they do not wipe data.)
3. Flash Rom
4. Reboot and enjoy
Flashing the rom on my device takes about 1.5 minutes or less, but the first boot will take about 2.5 minutes, and then another 30 seconds or so to format the applications. After the first boot it will boot up much faster.
Further Information:
Since this is basically a very minimally modified version of the stock Rom there is no need to post screenshots.
Removed Apps:
Below in the download section you will find a zip file containing all of the apk files that have been removed from stock during the process of building this Rom. Some of them will allow you to simply install, but other will require a little more effort:
To install apks manually that will not install themselves you will have to do the following:
1. Move the apk file to the /system/app/ folder with a root enabled file explorer
2. Reboot you tablet.
Download Links:
Version 1.1 (Current release)
Dropbox Download v1.1
Google Drive Download v1.1
MD5: 530ba66c73a052a486f2e28a3d725a7c
Removed Apps download:
Removes Apps (Dropbox Link)
Removed Apps (Google Drive link)
MD5: ed75336fb4693b1c7361a9fa1a85d0a1
Version 1.0:
Dropbox link: Download v1.0
Google Drive link: Download v1.0
MD5: fff31853881ba6d7c6a91c5a013fdb23
Let me know if you have any issues with Google Drive, and I can look into hosting it somewhere else also.
Special Thanks to:
martijn.vanpoorten For providing faster Dropbox hosting for this Rom!
Saved in case I need in the future!
Will this also work on P5110? Will be getting mine next week.
Sent from my Galaxy Nexus using Tapatalk 2
zyonee said:
Will this also work on P5110? Will be getting mine next week.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I am not really sure if it will or not since I only have the P5113. Do you know what the difference in the P5110 is?
Edit:
Took a quick look at a spec sheet and the only thing I noticed was that it looks like the P5110 might not have the IR?
sgrant said:
I am not really sure if it will or not since I only have the P5113. Do you know what the difference in the P5110 is?
Click to expand...
Click to collapse
Regional stuff only, I think, but if there are firmware files that differ between countries because of wifi channels, etc, it could be a problem. Never mind, I'll try it anyway. Might steal vendor files from a backup made before the flashing of your ROM.
Sent from my Galaxy Nexus using Tapatalk 2
The P5110 is without 2G/3G GSM Unit.
thor670
thor670 said:
The P5110 is without 2G/3G GSM Unit.
thor670
Click to expand...
Click to collapse
The P5113 does not have 2G/3G either.
I am looking forward to test this rom
I'm looking at creating a similar ROM for the 5100 (3G version) but I'm running into some issues during the framework de-odex.
@sgrant: if you have any pointers as to the tools or methods you use to actually make it work, I'd appreciate it.
Peace,
C.
Omg! Soo excited to try this!
Sent from my Nexus S using XDA
cheatman said:
I'm looking at creating a similar ROM for the 5100 (3G version) but I'm running into some issues during the framework de-odex.
@sgrant: if you have any pointers as to the tools or methods you use to actually make it work, I'd appreciate it.
Peace,
C.
Click to expand...
Click to collapse
If I had to guess I would say that you are targeting the wrong framework. Make sure you are targeting framework 15.
Regarding tools, I use Android Kitchen, but I DO NOT allow it to convert my updater-script to an update-script. Basically this means I can only use a few of the features of Android Kitchen:
1. Deodex Files
2. Zipalign
3. Create and sign zip
You may be able to use a few more things without the update-script, but I had troubles anytime I let Kitchen create it.
If you need more help create a thread in the Q&A forum and PM me the link. That way others will have a better time finding the information.
Clean ROM test results
Before you install the Clean ROM v1.0, know the following:
1. You MUST do a factory/reset in CWM5 (the CWM you install from my OP)
2. Factory Reset will NOT delete EVERYTHING on your external SD card
3. Installing Clean ROM V1.0 will NOT damage your CWM5.
4. I personally tested the Clean ROM V1.0 today. Runs smooth and it has some of the "bloatware" that can't be removed from the standard stock ROM. I detected an ever-so-slight improvement in smoothness & speed.
5. This ROM has NOT been tested on ANY Tab2 other than GT-P5113 at this time.
Bottom Line: We have our first SAFE custom ROM for the Tab 2 10.1 GT-P5113.
Thank you sgrant !
Glenn
weltwon said:
Before you install the Clean ROM v1.0, know the following:
1. You MUST do a factory/reset in CWM5 (the CWM you install from my OP)
2. Factory Reset will delete EVERYTHING on your external SD card
3. Installing Clean ROM V1.0 will NOT damage your CWM5.
4. I personally tested the Clean ROM V1.0 today. Runs smooth and it has some of the "bloatware" that can't be removed from the standard stock ROM. I detected an ever-so-slight improvement in smoothness & speed.
5. This ROM has NOT been tested on ANY Tab2 other than GT-P5113 at this time.
Bottom Line: We have our first SAFE custom ROM for the Tab 2 10.1 GT-P5113.
Thank you sgrant !
Glenn
Click to expand...
Click to collapse
Thank you Glenn!
But are you sure that the factory reset is deleting stuff from your external SD card? It is not deleting anything at all from my sdcard.
Factory reset does NOT wipe external SD card
sgrant said:
Thank you Glenn!
But are you sure that the factory reset is deleting stuff from your external SD card? It is not deleting anything at all from my sdcard.
Click to expand...
Click to collapse
My mistake. When I tried to access my external card using Astro File Manager it said the card was 100% blank and not even formatted. Removed SD card from Tab, plugged into my desktop PC and saw that all my files/data is still on the external SD card. I have corrected my posts accordingly.
Glenn
Excited to test this when I get home today!! Thank you for your work!
Drive link isn't working for me. It takes me to a sign up page that tells me that I need to upgrade my Flash player ? After redirect to play store I get error saying I don't have enough storage space, I do have a 32 gb card installed with 28+ gb of free space. :-O
Pp.
Sent from my GT P-5113 using xda HD that does not force close everytime I hit submit.
PanchoPlanet said:
Drive link isn't working for me. It takes me to a sign up page that tells me that I need to upgrade my Flash player ? After redirect to play store I get error saying I don't have enough storage space, I do have a 32 gb card installed with 28+ gb of free space. :-O
Pp.
Sent from my GT P-5113 using xda HD that does not force close everytime I hit submit.
Click to expand...
Click to collapse
It shouldn't make you sign up. Let me see about putting up another link somewhere.
Give me a few.
Edit:
Try this: Download
We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?
kalel90 said:
We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?
Click to expand...
Click to collapse
perhaps sth. like this could help
http://forum.xda-developers.com/showthread.php?t=1405041
http://forum.xda-developers.com/showthread.php?t=717437
kalel90 said:
We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?
Click to expand...
Click to collapse
The 7 inch version has the stock odin tars for the 3113. I've seen stock tars for the p5100 and p5110 on sammobile and sampro.pl, but nothing yet for the p5113.
Sent from my GT-P5113 using XDA Premium HD app
[Recovery][All Gen & Idea Blade]CWM 6.0.1.1 touch (stable) 6.0.1.5 (testing) [17/10]
Fully working CWM 6.0.1.1
Works on Gen1/2/3 and on Chinese blades.
Thanks to:
Koush for the original recovery.
KonstaT for the kernel sources (http://www.modaco.co...s7-android-235/)
tOmm13b for the suggestion to remove FTM mode to fix HW keys.
FAQ:
Menus are scrollable so if you don't see an option, just scroll down.
"Create image.zip" will create a flashable zip from your currently installed system.
Stable version (was testing version previously posted in this thread).
New versions with lowered brightness (set to 100 out of 255).
Fastboot flashable: recovery-clockwork-6.0.1.1-touch-blade-Snap.IT-20120830.img
MD5: 8dcffefd2cbef2913eaa066e9df01e1c
Flashable via recovery: recovery-clockwork-6.0.1.1-touch-blade-Snap.IT-20120830.zip
MD5: 864a6ed4e5fdd73101a17799cfada013
Gen1 version of stable:
Fastboot flashable: recovery-clockwork-6.0.1.1-gen1-touch-blade-Snap.IT-20120830.img
MD5: 283d6887fd97a9352f7bcfe9d2505c6e
Flashable via recovery: recovery-clockwork-6.0.1.1-gen1-touch-blade-Snap.IT-20120830.zip
MD5: e192c6f5a8679faf46d3c8a24747a11d
Testing version 6.0.1.5:
I've tested everything on it without any hickups, problems with previous versions (6.0.1.2 6.0.1.3 6.0.1.4) backup and sometimes hangups is solved in this one.
It includes a new menu item named "install zip from sideload" which can be used for installing a zip from your computer using "adb sideload 'path/to/zip'". It requires a newer adb, version 1.0.29 or higher.
Fastboot flashable: recovery-clockwork-6.0.1.5-touch-blade-Snap.IT-testing.img
MD5: 076f9671339b0d3c2d825a4e0311d209
Flashable via recovery: recovery-clockwork-6.0.1.5-touch-blade-Snap.IT-testing.zip
MD5: 5719f10a32040e5f5451be117bbd3a83
The link is broken, please fix this.
Just flashed the zip version of CWM 6.0.1.1.
All working fine as I installed SSrls7 zip and extra icons zip , but like you said the proximity sensor when covered made the screen go black although it came back on as soon as uncovered.
I also previously had Swedish Snow RLS7 with stock kernel.
Original gen1 amold, U.K San Francisco.
All in all quite impressed as this is my first go with CWM 6 and touch based recovery.
Anything else I can do to help.
Sent from my HUAWEI U8815 using Tapatalk 2
bladebuddy said:
Just flashed the zip version of CWM 6.0.1.1.
All working fine as I installed SSrls7 zip and extra icons zip , but like you said the proximity sensor when covered made the screen go black although it came back on as soon as uncovered.
I also previously had Swedish Snow RLS7 with stock kernel.
Original gen1 amold, U.K San Francisco.
All in all quite impressed as this is my first go with CWM 6 and touch based recovery.
Anything else I can do to help.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
That was the first version, the one posted originally seems to work fine with gen2 and 3 phones.
I made a new version with the lightsensor turned off and brightness set to 150, this one should work for everyone.
Md sum didn't match the one on the link after download.
Sent from my HUAWEI U8815 using Tapatalk 2
Works amazingly on my Gen2 blade
Appreciate the effort. Great work man
bladebuddy said:
Md sum didn't match the one on the link after download.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
Try the new version, the md5 match when i download it.
I'll remove the links to the earlier files soon, the lightsensor goes berzerk on any version of the phone apart from gen3 and even there it doesn't work properly.
Two things :
1. In the mounts and storage menu, there's no "go back" option. You have to pull the battery and reboot to go back
2. There's no option to create an update.zip like you said there was?
Aside from this, love the wallpaper and the touch recovery
QuantumFoam said:
Two things :
1. In the mounts and storage menu, there's no "go back" option. You have to pull the battery and reboot to go back
2. There's no option to create an update.zip like you said there was?
Aside from this, love the wallpaper and the touch recovery
Click to expand...
Click to collapse
1. Yes there is, you just have to scroll down to see it. Almost all menus are scrollable including the "no - no - no - no - yes - no - no" menus to confirm action.
2. go to backup and restore, the option is named "create image zip" it backs up and makes a flashable .zip file from current setup.
Moved to stable.
Jinxxed said:
Moved to stable.
Click to expand...
Click to collapse
Congratulations. I'm forwarding you to the xda news writers
Sent from my Ouya
Here's testing-6.0.1.2 Touch
About the same config as 6.0.1.1 but tweaked here and there for improved performance.
Fastboot flashable: https://dl.dropbox.com/u/54672755/recovery-clockwork-6.0.1.2-blade-testing.img
MD5: 94c2bd354151a26716b40233429a95ea
Recovery flashable: https://dl.dropbox.com/u/54672755/recovery-clockwork-6.0.1.2-blade-testing.zip
MD5: 7082d933543337a72e3c724f9a7bfeab
Hello i own a smartq t30 with a cmw 6.0.1.1 based recovery mode but it is all in chinese. Would anyone be so kind to post the structure of the menus in this recovery. It would be of great help. Thanks in advance
kolk11 said:
Hello i own a smartq t30 with a cmw 6.0.1.1 based recovery mode but it is all in chinese. Would anyone be so kind to post the structure of the menus in this recovery. It would be of great help. Thanks in advance
Click to expand...
Click to collapse
Just look in the clockworkmod github,, it's all in there apart from the touch, you're going to have to work around it and it's not easy.
In short, you can't do that without breaking touch.
Will do some testing on 6.0.1.2, just making a back-up with the stable version. will report back in a bit
---------- Post added at 08:51 PM ---------- Previous post was at 08:07 PM ----------
Backup and restoring works as expected, formats all work, mount as USB works, hardware buttons work, no flickering, seems all good to me
matt4321 said:
Will do some testing on 6.0.1.2, just making a back-up with the stable version. will report back in a bit
---------- Post added at 08:51 PM ---------- Previous post was at 08:07 PM ----------
Backup and restoring works as expected, formats all work, mount as USB works, hardware buttons work, no flickering, seems all good to me
Click to expand...
Click to collapse
Excellent, can you try to make an image zip and restoring from that too?
If that works for you as well i'm moving it to RC, i'll probably release a version with no-op as sheduler since it seems to be a whole lot faster for people with sd-ext ext3 filesystems.
Jinxxed said:
Excellent, can you try to make an image zip and restoring from that too?
If that works for you as well i'm moving it to RC, i'll probably release a version with no-op as sheduler since it seems to be a whole lot faster for people with sd-ext ext3 filesystems.
Click to expand...
Click to collapse
It works flawlessly for me
Sent from my Ouya
Jinxxed said:
Excellent, can you try to make an image zip and restoring from that too?
If that works for you as well i'm moving it to RC, i'll probably release a version with no-op as sheduler since it seems to be a whole lot faster for people with sd-ext ext3 filesystems.
Click to expand...
Click to collapse
It works for quantum foam, i'll give it a go later and see, currently on my break at work though
QuantumFoam said:
It works flawlessly for me
Sent from my Ouya
Click to expand...
Click to collapse
Sent from my ZTE-BLADE using Tapatalk 2
seems to work here!
I'm back from vacation and i see lot of good things for our "old" blade, but my phone is completely destroyed, shame I have not been able to test these new :crying::crying::crying::crying::crying:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Special thanks to @Adam77Root for his work to make this possible
Download links
Last version can be found here:
i9103
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
http://d-h.st/users/philz_touch/?fld_id=18564#files
Click to expand...
Click to collapse
Great to see Philz at R forum. First Adam's Official Cm10.1 then Official PAC now Official Support of Philz recovery.:good:
Edit: status 0 error occurs when i flash using cwm.
Disturbed™ said:
Edit: status 0 error occurs when i flash using cwm.
Click to expand...
Click to collapse
Replace the update-binary with this.
Sent from my GT-I9103
Adam77Root said:
Replace the update-binary with this.
Sent from my GT-I9103
Click to expand...
Click to collapse
Sorry,
Missed this from your feedback PM
Just fixed the zip on download server
Now, it should flash correctly
Many thanks for the support :good:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Phil3759 said:
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Click to expand...
Click to collapse
Thanks for the quick response buddy. I will provide you the same. But its time for my B'day party.:laugh:
run's on stock ics?
Is a awesome recovery y test in s2
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
Didn't get you buddy, come again.?
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
pulley06 said:
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
Click to expand...
Click to collapse
no run's on stock ics no format no flash rom's...return to CWM 5
will this file works on n7100 to?
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
do you know if this file works on n7100 to?
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
No buddy.
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
xastunts said:
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
Click to expand...
Click to collapse
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
AAh damn it! i apologize! i mixed this up with the devil dual boot recovery! that one didnt have exfat support so i needed to mount another ext sd card in fat32 and swap it when i was in other roms. pretty annoying!
no ur right urs works! i know cause my exfat is inserted and booting through ur recovery all day long trying to find my soul mate os lol.
thx alot for the stuff you do for us! ur our hero!
is there a 100% full format option in ur recovery?
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago. http://icons.media.xda-developers.com/images/editor/separator.gif
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
xastunts said:
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
Click to expand...
Click to collapse
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Phil3759 said:
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Click to expand...
Click to collapse
thx alot for reply! deeply appreciate it!:angel: how about using ur aroma browser that is built in inside the recovery and mark all files and just delete them ? will i be able to reboot into recovery mode after that? i was thinking that recovery files where flashed into a flash memory outside the phones internal memory to be a fail safe place harmless for beeing erased unless flashed with odin or flashed with any compatible recovery we got availible. am i right about this?
so my short question again is can i mark all folders and files and delete them directly through the built in aroma browser?
:good:
im willing to write you good comments and review here or on youtube if it is in ur demands.
[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)
Here is a short review first
| HARDWARE |:-: Talking about the Lava Xtron+’s hardware, the tablet boasts a dual core Cortex A9 CPU with each core clocked at 1.5Ghz and a Mali 400 Quad Core GPU.
Well, for the proof of graphics power, see the benchmarks by fonearena.com ,63.9 fps in nenamark, and the most important thing according to me, RK3066 IS THE BEST LAST GEN GAMING CHIPSET BETTER THAN TEGRA 3...I am a true geek and after searching for 20+ hours came to a conclusion that this is the best piece of android till 12-13k,(except Lumia 520 but it is windows)..
| BATTERY | :-:Coming on to battery, When I opened the battery stats page I find that Cell standby had consumed nearly 60% of the battery.WHAT!? Cell standby is the battery used by radio cells for mobile networks. This tablet DOES NOT have cell radio! The engineers working on this tablet didn't even bother to setup the OS properly and instead chose to simply download Android 4.2, flashed it in the tablet and have put it up on sale.
The Flipkart page reports the battery capacity to be 3,700mAh, which is probably wrong since the official specifications page on Lava’s website reports it to be only 3,000mAh. I can't be sure..:silly:
AIRPLANE MODE IS NOT COMPLETELY WORKING DUE TO DEFECTIVE DRIVERS (CELL RADIO DRIVERS ARE PRESENT IN THIS TAB SO IT SEARCHES FOR DRIVERS CONTINUOUSLY AND FUC*S BATTERY UP!:crying There is a fix in the post
| SCREEN |:-:The front of the Lava Xtron+ holds a 7-inch sharp IPS LCD display having a resolution of 1024 x 600. It’s a bright screen and with a pixel density of 170 PPI, it is pretty sharp too. The best part about the display is that, despite being an LCD screen, it’s not a battery consuming monster. I always found its battery usage to be lower than processes. The screen is prone to scratches though and is highly reflective.
We can enable the biggest advantage of PC gaming in android now, i.e 4xMSAA in deveoper settings, makes gaming experience even better than tegra 3
Click to expand...
Click to collapse
Before starting i would say that i am not responsible if any guides here bricks your device ( it should not happen at all if u follow all steps properly as the chances of permanent brick of rk3066 is very slim but boot loop is a possibility) I made this thread to collect everything I've done in one place. This should make everything very straightforward and basically most probably n00b-proof.
| ROOTING | :-:
Pre Requisites-Working drivers (if not then no problem), OEM USB Cable, LAVA ETAB XTRON+, 2 windows apps and PATIENCE
{Screen shots of important steps is in the attachements}
(i) For Drivers download and install moborobo
HTML:
http://download.moborobo.com/download/Client/Moborobo(Moborobo_En_official).exe
(ii) In tablet go to in Settings >developers options and turn it on and enable USB Debugging & before connecting it to your PC go into the tab's
settings again and click on storage.In it you will find 3 dots in top right hand corner.> USB computer connection >Enable Mass storage
Note: DO "NOT" TURN USB STORAGE "ON".(When Connected to PC)
Note: Remove your external SD card before rooting.
(iii) Connect it to your PC and click on refresh and install/find drivers and it will download and install them..(there might be a security warning
about force install) Now, it may not recognize the model no, IMEI and other things and say that the device is JB7+ but the only thing you
should look for to make sure it is the right device is the total size and usage of internal Memory and NAND Flash..
(iii) Now drivers are securely installed and the tab is connected in the right way (there is no OEM (LAVA) drivers anywhere)
Download the zdm (Chinese software) in the attachments (For Every Step first see the screenshot)
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
(iii)) When it detects the there will be something written like this in the bottom right corner :??ROOT : ONE or something like that (not in screen
shots as the tab is already rooted ) but it must be in green colour.This is the confirmation that the device can be rooted.
(iv) Now click on the Root Button in left hand side
(v) Click twice on green (thingy) first where it says ROOT then again for the confirmation popup (says something else but in green box)
(vi) Rooting Process has begun and the tab will restart (my PC is quite fast so it was almost instantly restarted and the Super SU was flashed it may or may not take 2-3 mins)
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
Also, you should change the WiFi scanning interval to 500 I.e 5 min as you really just require one scan when connecting to a known network..change the wifi supplicant scan interval to 500 build.prop
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
(i) Firstly you have to get the arctools apk,either by registering at their forum..
HTML:
http://www.arctablet.com/blog/forum/arctools-application/clockworkmod-cwm-recovery-easy-install-on-rk3066-and-rk3188-devices/
(ii) Click on download and select RK3066 CWM fun androtabinfo 6.0.3.1, there is only one option like that so it may or may not be in order.
(iii) Afer downloading click on install apps give i superuser permission and Voila! CWM.
(iii) You should also see the log right in the middle of the apps to verify that the flash and push thingy worked correctly with no errors
(iii) Select Reboot to recovery or Turn the tab off and press power button+vol up and the recovery should open
YEAH! YOU NOW HAVE COMPLETE CONTROL OF YOUR TAB
(B)METHOD NOT TESTED BY ME
HTML:
http://androtab.info/clockworkmod/rockchip/
(i) DOWNLOAD RK30GENERIC_CWM.zip from
HTML:
http://androtab.info/clockworkmod/rockchip/
(ii) Here are the different ways to flash this zip file
HTML:
http://androtab.info/clockworkmod/rockchip/install/
|CUSTOM ROM(s)|:-:
There is only one ROM which is worth flashing and even that might be slightly buggy..
Well, I don't recommend to flash a custom ROM here as they may have bugs like Wifi still if you want the following features
Auto Install Feature: This allows you to install apk's automatically on first boot, if you have the apk files located in a folder named autoinstall on your external SD card.
HTML:
http://www.freaktab.com/showthread.php?8910-Auto-APK-Install-Feature
Rooted with SuperSU
Debloated of all Lava bloatware
Google Play Store tweaks added to improve availability of apps
Init.d support
Busybox support
English language default (all other languages are still supported)
Boot screens by Tattman65
Flash Tool by Finless
Reboot app by Petrus
Here is Lava Xtron+ RileyROM 1.1
HTML:
http://www.freaktab.com/showthread.php?10688-Lava-Xtron-RileyROM-1-1
Complete flashing procedure in extreme detail is in the ROM zip file (it is a PDF file named first time user guide , very helpful)..Personally I have not flashed the ROM as I don't think it is worth the hassle and possibility of no Wifi...
PLEASE CLICK ON THANKS IF I HELPED YOU, IT REALLY MOTIVATES ME!:highfive:
Thank you.. I was waiting for a method to crack this tab.. Will comeback with result.
Ext4 support
Can somebody tell me if ext4 is supported or not, when i try link2 sd it says not supported but I am pretty sure that the system partition itself is Ext 4, (I'm the one who made the guide)
Try ext3. It will be supported.
Prince.Paul.K said:
Try ext3. It will be supported.
Click to expand...
Click to collapse
Well, I have tried it there are some problem in link2sd, but according to an nandroid the system and data are ext4 , I have set up everything in ext2 and would hate to do it all over again, is there a way to verify support of ext 3 or 4 acc to wiki, kernel above 2.6 support ext4 and the kernel here is 3.0... One more ting, when I tilt the tab, I think that something heavy is moving around inside slightly, probably battery should I ask for a replacement? I have 4-5 days remaining I bought from flipkart, I do have a complete SD and nandroid backup..
EDIT: in d/tracing events ext4 there is a file called enable and the value inside is zero should I change it to 1
I think I found out the culprit, the first partiton that I tried was ext2 so link2d created a script for that..now, when I try to use ext3 or 4 ..it still tries to use that same script..so I willl delete the script then try again...
Successfully Rooted..! Sorry for the delay..!
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
ukstillalive said:
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
Click to expand...
Click to collapse
Click to expand...
Click to collapse
HTC.EXPLORER said:
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
Click to expand...
Click to collapse
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Going to fix battery
Sent from JB 7+ using tapatalk
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
HTC.EXPLORER said:
nitinchamp said:
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
it still does scan for networks to see what other networks are present
there was also another method to root this tablet which i found back in december mentioned here
Click to expand...
Click to collapse
help
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
ukstillalive said:
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you are familiar with cwm or do you even have it installed, if you do then just go to install zip from sd card and select the zip file...secondly if you have a cwm nandroid backup (recommended) just go to backup and restore select resotre or restore from externel sd and then select the date of the required backup file then click restore..If you do have a cwm nandroid backup then it MUST work...if you don't even have the recovery then, ist step is to install it through THE guide then, try to do the ist (not recommended) option...
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
ukstillalive said:
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
Click to expand...
Click to collapse
Did you make a nandroid cwm backup before flashing ROM?
Also can you make the account as soon as possible
CM10 for Lava Xtron +
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
ukstillalive said:
nitinchamp said:
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
Then just take a backup of the ROM you currently have installed (I think Riley) and if the CM doesnt work out, revert back easily..:good: Post your results here
Click to expand...
Click to collapse