Database Info

[ROM] (Flytouch 2, SuperPad, WWE10) 2.2 v2.1 #3925

Thanks to kiodo1981 for bringing this to us so quickly
Click to expand...
Click to collapse
THIS ROM MAKES THIS PAD ROCK NOW
For now its back to using IUW to do either one of the versions..
you will also need to have done a U-BOOT-NAND upgrade at some stage.. and need to be showing at least uboot - 0.6.1.5 (587) at bootup at the right hand bottom of our screen.. if you dont have this then you will need to do it..
1: Here's a new link by Smarkies that has a great pictural step by step flash guide
http://forum.xda-developers.com/showthread.php?t=1074251
2: This is the new Flashable via SDcard 2.2 v2.1 thanks to vihtor
Originally Posted by vihtor
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.
Click to expand...
Click to collapse
instructions.. thanks to Jiggity Janx
CONFIRMED #3925 2.2 v2.1 bootable sd install. One step process. Great job!
(for those wondering I have 6.1.5 (559) uboot so any at that or later should be allright)
EDIT: IF you have at least 6.1.5 (559[or higher]) showing on the Infotmic screen when booting you should be able to 1) download the .img file at the link above, 2) burn the .img file to an sd card using win32diskimager (or winhex), and 3) insert the sd card into slot between 2 usb ports while booting to update to 2.2 v2.1.
PS Not only does camera still work clearly for me on 559, camcorder records now.
Click to expand...
Click to collapse
3: Ramdisk work around
http://forum.xda-developers.com/showpost.php?p=13974529&postcount=58
read posts from about 55-58 on Smarkies, why it is a good idea to re-flash the ramdisk
other versions if you have no success with the one above....
here's a link to the files you need.. iuw1.1-english
http://www.fileserve.com/file/taD2UBA
plus instructions..
http://www.fileserve.com/file/6Hn9ytR
Use IUW to make a bootable sdcard.. this is first version.. still stable, it is posted for those that dont want to go straight in to flashing a unwrapped image file.. if you use the instructions you should be able to just dump/flash this to your usual bootable sdcard.. stick it in the top slot and it will upgrade to this version.. no usb needed.. (note.. you will still have needed to have upgraded your "u-boot" at some stage... read further down for this..
ROM 2.2 V1_8
http://www.b2cus.com/software/WWE10B_Android_2_2_V1_8_U0M_GT2005.rar
2ND VERSION -
Warning - be slow and sure about what you do here.. you can brick your pad if you burn the wrong files... you have been warned..read the other threads before you do anything.. and have the opened IUW instructions with the pictures if you are unsure...
1st use one of these...
uboot - 0.6.1.5 (587)
Originally Posted by l33tlinuxh4x0r My uboot - 0.6.1.5 (587) http://www.mediafire.com/?bv4ixzeq34q5bi7
Click to expand...
Click to collapse
confirmed working and Roots for me ---- But no Camera for me
or
Uboot - V 0.6.1.2(587)
thanks to veryjo http://www.android-hilfe.de/attachments/apad-gf-10-flytouch-2-forum/31799d1302373904-installationsanleitung-flytouchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
Click to expand...
Click to collapse
Confirmed working, Roots and camera for me working
MAIN ROM FILES
Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
Confirmed working and "ROOTED" yeha.
Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases..Urgently so we don't get too many bricked pads
ROOTING
Thanks to Barsuk..
Root with launcher pro only. Into launcher pro adding activity "Development" to desktop and use it then z4root.
Click to expand...
Click to collapse
or
Universal root - seems to work for me
Click to expand...
Click to collapse
Jogor said:
Working and rooted.
I installed #3656 first and skipped the UO file when installing this and everything worked great. I installed the newest UO 0.6.1.5 () too and root seems to work after that too.
What I really like with this release is that swedish language is included (was missing in all updates after 1623) and ofcourse that it's Froyo!
To get Titanium Backup to work you will have to copy your old TitaniumBackup folder from the SD card to the new created when you installed TitaniumBackup, after that TitaniumBackup will find all your backuped apps.
It seems like both Flytouch2 and Flytouch3 are at version #3925, maybe the are compiling new versions for both pads at the same time now, so we can count on a new version when Flytouch3 gets one?
Click to expand...
Click to collapse
NOTE: do not use the update software on the pad even through it says there is an update available.. it will take you back to firmware: 2.1-update1 V1.8#2752
kernel version : 2.6.32.9

reserved
reserved for more info
Bugs so far.. will update as the forum grows so that we have a reference page at the front.. saves a lot of reading later if this grows too much..
Please report your bugs and we can get people to work out fix's for you..
1: Ndrive does not work in this version
2: Small amount of people experience has Wifi connection/dropout problems - yet to find a fix..
Also no confirmed tests on Ethernet connections as yet - will confirm once we get some feed back - I am in Singapore airport and wasn't able to use the the Ethernet plugin for net.. so will check it out over the next few days as I will be in different Hotels so can test connections on the road
3: No apps2sd --- hope some one smarts finds a work around.. it would be killer if we could redirect some of the apps to see the SD1
A note on this...
in 2.2 V1.8 the file structure is sdcard local ram storage.... and ... SD1 - sdcard storage.. and SD2 -
in 2.2 V2.1 file structure is Local ram storage... and SDcard 1 and 2
both are locked in to using the local partitions for program storage and program data storage..
Which is a shame as things like ebooks and heavy graphic programs it would be nice to send the storage to SD1 or 2
This is fixed.. look at Smarkies thread for work around..http://forum.xda-developers.com/showthread.php?t=1074251
4: Synchronization contacts and google calendar - Mixed bag on this one.. some get it some don't...might be a cache thing..
Fix once again provided by Barsuk .. check posts from Capeschae and Barsuk for fix.. they are from posts 121 pg13 - 126 pg 13
5: Paid Market apps - This is because of the China location block from Google more on it http://forum.xda-developers.com/showthread.php?t=551929&page=3
there seems to be a fix thanks to Barsuk..
Problems with market. Not all applications are available. Workaround: clear data for Google Services Framwork then force stop it then reboot tablet.]
Click to expand...
Click to collapse

In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.

I have to thank for this link www.b2cus.com/software isergio

vagros said:
In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.
Click to expand...
Click to collapse
Yes..I had that problem too..as tried to set a cache Linux as well..had a God arwful time with it..I think it is something to do with how they have setup the drives for the internal ram on the pad..
Hopefully one of the guru's will grab this then work out how we can get real apps2sd..then we will be laughing..
Sent from my warm evo using XDA App

Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc

Tugdu77 said:
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc
Click to expand...
Click to collapse
i can help for the camera-problem...
install after installing FW this Uo: http://www.android-hilfe.de/attachm...uchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
now the camera works

how to install this update without usb cable?

more stable
Thank you very much for the firmware much more stable, it does not freeze as V4 and V5 when used continuously.

Help wifi
Hi,
I have installed this new firme and i have a problem with the wifi. You turn off continuously and lasts very little connected. I have configured with fixed ip and wpa encryption.
Does anyone know if there is any way to solve it?
Thank you and a greeting.

Thanks to Isergo
kiodo1981 said:
I have to thank for this link www.b2cus.com/software isergio
Click to expand...
Click to collapse
Yes, I would like to thank "Isergo" too for making this public..
A clean fast Rom forsure..
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
@patosoft
I am running Wifi with WPA/WPA2 PSK with Auto i.p.. no problems
been downloading and streaming with it..
@Asiaa -- use IUW to make a bootable SDcard for the 2.2 1_8 version
http://wwe10b_android_2_2_v1_8_u0m_gt2005.rar/

After installed 2.2 v2.1 #3925 I found two bugs
- The camera does not work properly. I fixed the camera by replacing u-boot-nand.bin. Currently I have version 0.6.1.2 (587)
- Failure to sync contacts and calendar.
Market and Google Maps in this version work properly.

dgcruzing said:
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
Click to expand...
Click to collapse
the Uo is version 0.6.1.2(587)
perhaps you have memories of the fw 2852. this fw had camera-problem too

not able to root
This verision is awesome, having problems rooting it, have tried z4root and universal android root also, anyone have a solution for this. also having problems with market, not showing alot of apps, mostly Chinese and no google navigation

I used UniversalAndroot-1.6.2-beta5. The first time did not work the second time worked.

Hello,
Thank you for answering me. It is true that by dhcp works perfectly, but prefer to solve the problem and leave it in static. Anyway with this solution, I better to work with the epad and already ire sought a way to fix it.
A greeting and thank you

After trying a few flash websites, I noticed that Flash Player is ON BOARD in this Froyo ROM!
But colors are something between colored and black&white...and crash in fullscreen mode.
The colors issue has been fixed on the new Flytouch (512Mb RAM) - the following quotation from Androidtablets.net explains how to proceed:
Flash Player issues RESOLVED - new flash player .apk
I have tested this on my ft2v2 with TCH rom 0419, and it mostly worked! Flash now played with correct colours and almost no lag once buffered. It did however crash when I attempted to go full screen, so not perfect yet. Opera mini and Maxthon Browser use the youtube app for youtube website if you have it installed. This works excelently. Flash worked well on other flash websites, I tried an emag site and it loaded where it would not before.
Here is the new apk: Adobe flash for flytouch3.rar (Thanks koti)
Password: koti
Install:
1) use Root Explorer to rename file \system\app\install-flash-player.apk to .old
2) Reboot Flytouch
3) Install the above .apk
I tried youtube and also some eMag sites.
NOTE: This is now included in Tim's ROMS 3b and 3c.
NJoy!
Last edited by Chandos; 05-02-2011 at 05:21 PM.
Click to expand...
Click to collapse
I tried to find the file \system\app\install-flash-player.apk but it doesn't exist in our 256Mb Flytouch...so I directly installed the new Flash Player from the link above but nothing changed with the Flash videos colors, even after a restart.
Does anyone know how to properly install this new version of Flash Player???!!!
Tuc

I rectified,
Still failing me the wifi. Automatically I hold a more function, but is still cutting. Before I had the firm 3245 and it worked fine. So I'm going to return to this firm.

"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently

caravanman said:
"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently
Click to expand...
Click to collapse
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.

[Q] Galaxy Tab 7.7 with Paranoid Android 2.55

I just wanted to say that I was really impressed by trying the Paranoid Android 2.55 ROM pa_p6800-2.55-17NOV2012-053308a, with Gapps package gapps-jb-20121011-signed.
IT IS A TOTAL AWESOME UPGRADE from official Stock Rom Ice Scream Sandwhich second phase. That's why I decided to make it easier for all the other owners of this tablet to just upgrade their tablet with this ROM pacakge.
So here is what I did with TWRP recovery:
1. Wipe Cache
2. Wipe Dalvik Cache
3. Wipe (Factory Reset)
4. Then I made a FULL BACKUP.
5. Then I decided to upload that backup on Torrents so everyone else may upgrade their tablet with a simple TWRP recovery.
Since I am still not permitted to write on the Development forum I would really like to know the following:
1. Should this Backup Recovery for my P6800 work on the same model of the Tablet of other people without problems? In other words, does this recovery work only for MY device or it should work on similar devices?
2. I am not sure who is the author who deserves true credit for this ROM, but I have been seeing the name Daniel quite a bit. AndroguideFr is saying it's not his work. Please provide me the list of people who should take the credit for this before I upload the torrent with the instructions.
Finally tell me if it's a good idea, what you think about it, do you have any advice for me? Do you think this should work?

Instructions & Torrent
The torrent link: Since I still can't post links you can just search for "Super Galaxy Tab 7.lly Bean Upgrade" on the pirate bay website.
The following is the instructions I provided with the torrent. I would be glad if you tell me what you think about it:
This torrent is ONLY for those who own the Samsung Galaxy Tab 7.7 with Wifi & 3G (GT-P6800). Be warned that the instructions provided here will not work on any other device or model.
Noob Definitions:
ROM means FIRMWARE or DEVICE SOFTWARE
BRICK means Phone/Tablet Getting Stuck without being able to boot.
So are you happy with your Samsung Galaxy Tab 7.7 tablet Stock ROM (firmware)? In other words, are you happy with the original software the device came by? If you are not, there is good news here. I have tried my best to make it as easy as possible to upgrade your Tablet with the best ROM I have come across for this tablet, which is Paranoid Android version 2.55 with Android Jelly Bean 4.1.2.
Why I am recommending this ROM and why I am doing this? Simple, I have tried all previous versions of Paranoid Android ROM for this device and they were all great but with minor to major bugs. This is the only ROM that I have found to be:
1. Super Fast. It consumes only an average of 120 megabytes of your internal tablet memory and all Samsung bloatware is removed by default.
2. Stable. I haven't come across any problems with it up till now and the smoothness of the graphics and device responsivity is really amazing.
3. Battery Saver. All Paranoid Android Jelly Bean ROMs I have tried save a great deal of battery power. You will notice at least double battery standby time switching from the stock IceCream Sandwich.
4. Of course WiFi & GPS are now tested and working.
I have not tested this ROM for more than a few days, however considering all the progress I have been seeing I expect only very few bugs that I would wholeheartedly sacrifice for this great experience on my tablet. The instructions include a full backup of your existing Data/ROM so just in case you don't like your new upgrade you should be easily able to recover your previous ROM/Data as they were before.
Introduction:
- I have made the hard work so you don't have to do it yourself to upgrade your tablet. I followed all the online instructions to install the following ROM file "pa_p6800-2.55-17NOV2012-053308a" with this Google Apps package "gapps-jb-20121011-signed" on the Samsung Galaxy Tab 7.7, and then I had reset my device (factory reset) and took a FULL BACKUP with a recovery software called TWRP.
- This torrent is the FULL BACKUP recovery made by TWRP and once you install (flash) the TWRP recovery software on your device you will be able to take this BACKUP and recover it on your own device without problems. So here are the detailed instructions:
BE WARNED:
1. Before beginning make sure to charge your device battery to above 80% !! Losing power during recovery may BRICK your tablet.
2. I repeat: This torrent is ONLY for those who own the Samsung Galaxy Tab 7.7 with Wifi & 3G (GT-P6800). The instructions provided here will not work on any other device or model.
3. The instructions provided here are accurate to the best of my ability and I will help you upgrade your tablet by replying to your comments if you had any problems BUT STILL you will do this at your own risk and I'm not responsible for any data you may lose or tablet you may brick.
4. Please read the instructions in the given order and do exactly as mentioned to avoid any problems. Should any questions arise just raise your hand and ask before continuing. It's better to be safe than sorry.
5. Your Tablet must be ROOTED for being able to install TWRP recovery given the following instructions if it's not rooted try following this link before continuing further: (link provided)
In case this link doesn't work you will find many tutorials online on how to ROOT your Galaxy Tab 7.7 just Google it and good luck, then come back here.
INSTRUCTIONS:
1. Objective: Preparing Extracted Data
After completing torrent download extract the file "SamsungGT_7.7_Custom_ROM.rar" with WinRar on your PC on your prefered location and leave it there until required.
2. Objective: Installing TWRP Recovery on Tablet
Open Google Play market on your Galaxy Tab search, download and install the GooManager application. Open it, and look for "Flash ROMS", a message will pop-up telling you "IN ORDER TO USE THIS FEATURE YOU MUST HAVE AN OPENRECOVERYSCRIPT COMPATIBLE RECOVERY", just choose "Try to find one for me". This should download the TWRP recovery software and automatically flash your device you will see a pop-up message saying "TWRP recovery is installed successfully". If your device is not ROOTED the GooManager application will not have the privilage to FLASH your ROM. If your tablet is not rooted just quit this tutorial, search for online Tutorials on how to root your Tablet on Google and come back again.
3. Objective: Transfer Recovery Backup onto Tablet
OK, now you have to copy the TWRP folder you just downloaded through this torrent onto the EXTERNAL SDCard of your Samsung Galaxy Tab. To do that, just connect your device to the computer with its USB cable and in a minute or 2 you should be able to see your Device "GT-P6800" under Portable Devices (if you are Windows 7) or perhaps "Removeable Device" (if you are on Windows XP). Just make sure that you copy the extracted TWRP folder on your external storage (SD Card) on your Galaxy Tab. If you did not see your external drives on My Computer you might need to install Samsung Kies Drivers so your tablet is recognized on Windows.
4. Objective: Boot Into Recovery Mode
Now you have the TWRP recovery software flashed on your device and the recovery Backup itself on the external storage. The next step is to Power Off your Galaxy Tab completely, then Press the Power Button and hold on together with the Volume UP (+) button. Once you see the Samsung Galaxy Tab logo remove your finger from the Power button and you should see TEAMWIN with blue background and you will be in Recovery Mode.
5. Objective: Full Backup of Existing Data
Once you are in the TWRP recovery screen just touch on the "Backup" button to make a full backup of your current ROM & Data so in case anything went wrong you can recover all your data later with no problems. Make sure that "System", "Data", "Boot", "Recovery" & "Cache" checkboxes are checked and then choose the radio button "Using Internal Storage" or "External Storage" depending where you have more space (external storage is recommended). Then Swipe the arrow on the left to the right to Backup your device.
6. Objective: Full Recovery of New ROM Package
After successful backup, touch on the home button at the top of the screen and touch "Restore" button so you can now install the New ROM recovery you downloaded on your external storage. You will see 2 radio buttons one is "Using external SD" and the other "Using internal Storage". Since you put your recovery on external storage just leave the radio button checked on "Using external SD" and you should see the "FRESHBACKUP" recovery folder, touch on it. In the next screen make sure that the "System", "Data", "Boot", & "Cache" checkboxes ARE CHECKED. Considering you have made all the steps exactly as mentioned so far Swipe the left arrow from LEFT TO RIGHT to recover your tablet into the new ROM. Wait until all the recovery steps are finished indicating that all is successful. You will find a button to "Reboot System" or similar.
7. Objective: Be Patient, It's Happening
Once you reboot you will notice IT WILL TAKE SOME TIME AT FIRST don't panic, just leave it finish what it is doing for as long as 10 minutes. You will find the "Android is Upgrading" pop-up optimizing your applications, that is totally normal. Then finish all the step-by-step instructions given on the screen in regards to your Google Account and Good Job You are now enjoying Paranoid Android 2.55 with Jelly Bean 4.1.2. You can customize it as you wish from the settings.
Troubleshooting:
In case you had any problems in Steps 6 & 7 or you didn't like the new recovered ROM just go to Step 4 (boot into recovery mode) and recover your original data you backed up in Step 5.
Application Tips: The following are my favorite must have applications:
1. SwiftKey Keyboard is a great keyboard that reduces typing errors through predictions and learns a great deal about your your own choice of words.
2. Pattrn is a very good application for simple backgrounds.
3. Flipboard & News360 great tablet apps for enjoying news in an intuitive interface.
4. Facebook, Facebook Messenger, WhatsApp, & YouTube app.
5. ES File Explorer & File Manager.
6. Kobo Ebooks.
7. Firefox & Dolphin Browsers.
8. Evernote (Great Cloud based Notes - Never lose your important notes).
9. Bluetooth File Transfer.
10. Juicy Defender (Battery Saving App).
11. Market Access App (you will not find this on Google Play Market. Google it and once installed you can download apps from market not restricted by Country).
12. TapaTalk (Great forum-ing experience for Android).
13. Yahoo Weather (the most simple widget for Weather Info)
14. WordWeb dictionary (great free dictionary).
15. MX Player & ArmV7 process codec package (very good media player).
16. Dr. Web Light antivirus (The lightest antivirus for android with very high detection rates).
17. WiFi Analyzer (great for deciding on which Channel to put your WiFi router so you have the highest reception).
18. CamCard (Scans your business cards and automatically fills-in to your contact list).
19. Adobe Flash Player (It is no longer available in Google Play but you can find it in online tutorials on Google, it's a must for some websites to work).
If you have any inquiries just comment on the torrent and I will respond, otherwise send an email on [email protected] Torrent commenting is more recommended though!

Can you please post a youtube video of the rom
Sent from my GT-P6800 using Tapatalk 2

Only problem with Paranoid is that it is based on CM and there are many know issues. My biggest issue is the video codecs. The devs will not fix this and any videos I have that play in ICS will not play in any ROM based on CM. Would love to have a Jelly Bean ROM but with some many know issues I am happy with ICS until an official update comes out, if it ever does.
Sent from my GT-P6800 using xda premium

I was under the impression that 5Ghz WiFi still isn't working properly on this build?
Sent from my GT-I9100 using xda app-developers app

noknok1 said:
Can you please post a youtube video of the rom
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
Sorry I will not be able to do that since I am not sure how but I assure you it is super fast with me now
adinis78 said:
Only problem with Paranoid is that it is based on CM and there are many know issues. My biggest issue is the video codecs. The devs will not fix this and any videos I have that play in ICS will not play in any ROM based on CM. Would love to have a Jelly Bean ROM but with some many know issues I am happy with ICS until an official update comes out, if it ever does.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
I haven't faced any problems with the following apps:
MX Player
MX PLAYER ARMv7 codecs
Everything works with me with those. Just tell me what are you trying to play maybe I never tried your formats.
pinsb said:
I was under the impression that 5Ghz WiFi still isn't working properly on this build?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not sure about that but this build is acclaimed to be WiFi and GPS fix.
Sent from my GT-P6800 using Tapatalk 2
I suggest that you guys give a try to this Rom because the performance versus feature boost makes the ICS stock Rom look like an ancient slow tablet. The delay of opening the Phone app is highly reduced and I rarely ever lag on keyboard.

Quick question befour i flash this rom is otg working or not
Thanks
Sent from my GT-P6800 using Tapatalk 2

Sorry what is OTG? Ok I checked on Amazon and I guess I have never used this device. But the usb connection to the computer is working as expected normally.
Secondly, why do you have to take a risk in flashing a ROM? Take a full backup recovery of your existing configuration, should anything go wrong you can revert back so easily without losing anything. Let me know if you need any help.
Sent from my GT-P6800 using Tapatalk 2

iamarto said:
Sorry what is OTG? Ok I checked on Amazon and I guess I have never used this device. But the usb connection to the computer is working as expected normally.
Secondly, why do you have to take a risk in flashing a ROM? Take a full backup recovery of your existing configuration, should anything go wrong you can revert back so easily without losing anything. Let me know if you need any help.
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
How is GPS fixing?
İs it as good as fixing with İCS rom ?

sas_sas said:
How is GPS fixing?
İs it as good as fixing with İCS rom ?
Click to expand...
Click to collapse
Yes, GPS now works fine.
Sent from my GT-P6810 using xda app-developers app

Obtained by downloading the torrent and tried it thru utorrent to download but not possible to download this v2.55. Why?

You mean there are no seeders? If that is the case I will upload the file on skydrive account and share the link with you as soon as I am home.
Sent from my GT-P6800 using Tapatalk 2

sas_sas said:
Obtained by downloading the torrent and tried it thru utorrent to download but not possible to download this v2.55. Why?
Click to expand...
Click to collapse
dude... just download from official thread and flash it using cwm...

Finally, I found and flashed with it.
My first impression is positive. Thanks for your suggestion.
GPS and all other HWs are working..
But the Paranoid settings under Settings are not working and not adjustable..

Which version of gapps did you use? What exactly is not working in paranoid settings?
Sent from my GT-P6800 using Tapatalk 2

iamarto said:
Which version of gapps did you use? What exactly is not working in paranoid settings?
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
Gapps jb 20121011..
DPI sizes of user/syst apps and status and nav bar sizes under interface...

edan1979 said:
dude... just download from official thread and flash it using cwm...
Click to expand...
Click to collapse
that's what i did yesterday, not sure about all this mumbo jumbo extra steps this guy is posting.
downloaded 2.55 - was coming from stock so went into CWM, flashed PA 2.55, rebooted into recovery, then wiped cache, dalvik and did factory reset, then rebooted into recovery and flashed PA 2.55 again.
booted up, rebooted into recovery and flashed gapps.
easy peasy.

I didn't try changing that the default is fine for me. I guess you can find better help in the development forum on this issue.
Sent from my GT-P6800 using Tapatalk 2

iamarto, bellow is my reply to your post.:
"I haven't faced any problems with the following apps:
MX Player
MX PLAYER ARMv7 codecs
Everything works with me with those. Just tell me what are you trying to play maybe I never tried your formats."
All the movies I have are either straight digital copies or dvd rips, they have not been converted into anything. They play fine in ICS but on any CM based ROM they don't, no matter what video player I used. Again it all has to do with the the missing codecs of ICS. I don't want to waste my time converting all my movies just because the ROM does not support them.
Sent from my GT-P6800 using xda premium

idiotekniQues said:
that's what i did yesterday, not sure about all this mumbo jumbo extra steps this guy is posting.
downloaded 2.55 - was coming from stock so went into CWM, flashed PA 2.55, rebooted into recovery, then wiped cache, dalvik and did factory reset, then rebooted into recovery and flashed PA 2.55 again.
booted up, rebooted into recovery and flashed gapps.
easy peasy.
Click to expand...
Click to collapse
I hope you do realize that calling someone "this guy" is insulting.
adinis78 said:
iamarto, bellow is my reply to your post.:
"I haven't faced any problems with the following apps:
MX Player
MX PLAYER ARMv7 codecs
Everything works with me with those. Just tell me what are you trying to play maybe I never tried your formats."
All the movies I have are either straight digital copies or dvd rips, they have not been converted into anything. They play fine in ICS but on any CM based ROM they don't, no matter what video player I used. Again it all has to do with the the missing codecs of ICS. I don't want to waste my time converting all my movies just because the ROM does not support them.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
If you don't provide the extension of the files, or the codecs of the type of files that you are trying to play I believe I cannot help you. But I am still telling you that I haven't faced any problems trying to play any kind of video file up till now.

[Q] Questions about CROMi-Xenogenesis 4.6 First-time Install

Hi, I hope this post is in the right section (please move if not).
I have lots of experience rooting and installing custom ROMS on my Samsung i9000 phone, but this will be my first time installing a custom ROM on my TF700T. The tablet is unlocked and rooted and has the latest Android JB version and bootloader (4.2.1, 10.6.1.14.4). I also have TWRP 2.5 installed and working. However, I have a few questions before I start - sorry if these seem really noob.
1. My current SKU in Taiwanese (TW) - do I just use the WW edition without making any changes?
2. I've never used DATA2SD before - do I need to format the SD card and add the /Data/ directory manually, or does the CROMi installation do this for me?
3. The tablet is currently setup for two users (myself and my wife). Does CROMi-Xenogenesis 4.6 support mutli-user?
4. If I back up all the current settings using Titanium, do I need to do it in both profiles? Or should I simply do a simgle backup from root?
Any help would be much appreciated.
Cheers, R

rich110 said:
Hi, I hope this post is in the right section (please move if not).
I have lots of experience rooting and installing custom ROMS on my Samsung i9000 phone, but this will be my first time installing a custom ROM on my TF700T. The tablet is unlocked and rooted and has the latest Android JB version and bootloader (4.2.1, 10.6.1.14.4). I also have TWRP 2.5 installed and working. However, I have a few questions before I start - sorry if these seem really noob.
1. My current SKU in Taiwanese (TW) - do I just use the WW edition without making any changes?
2. I've never used DATA2SD before - do I need to format the SD card and add the /Data/ directory manually, or does the CROMi installation do this for me?
3. The tablet is currently setup for two users (myself and my wife). Does CROMi-Xenogenesis 4.6 support mutli-user?
4. If I back up all the current settings using Titanium, do I need to do it in both profiles? Or should I simply do a simgle backup from root?
Any help would be much appreciated.
Cheers, R
Click to expand...
Click to collapse
1. Yes just use the WW. It really dont make a difference but I wouldnt use the US rom unless you are in the US.
2. I have never used DATA2SD but by what I have read, you must use GParted to format the SDcard a certain way in order for the Mod in the CROMiX installer to see it. You MUST use GPARTED, you cannot use any other without risk of more problems.
3. Yes CROMiX supports multi-user. CROMiX is just the stock ROM, but de-bloated and extra tweaks.
4. Titanium will backup all apps. Though I do not use other users, I would think if you back it up from the Owner User, it would back up everything, but I do not know if the owner can access other users info though.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

I can answer the 2nd question, You need to do all the partitioning and formatting on your PC (under Linux preferably) with GParted, CROMi does not do the preparation. As noted in the following thread http://forum.xda-developers.com/showthread.php?t=1962507.

rich110 said:
Hi, I hope this post is in the right section (please move if not).
I have lots of experience rooting and installing custom ROMS on my Samsung i9000 phone, but this will be my first time installing a custom ROM on my TF700T. The tablet is unlocked and rooted and has the latest Android JB version and bootloader (4.2.1, 10.6.1.14.4). I also have TWRP 2.5 installed and working. However, I have a few questions before I start - sorry if these seem really noob.
1. My current SKU in Taiwanese (TW) - do I just use the WW edition without making any changes?
Click to expand...
Click to collapse
No problem, as long as you have adequate command of the English language, which you do seem to have.
2. I've never used DATA2SD before - do I need to format the SD card and add the /Data/ directory manually, or does the CROMi installation do this for me?
Click to expand...
Click to collapse
Just make the two partitions, and follow the prcedures to the letter. Your ROM will do the rest.
3. The tablet is currently setup for two users (myself and my wife). Does CROMi-Xenogenesis 4.6 support mutli-user?
Click to expand...
Click to collapse
I haven't tested this, but since it is based on Android 4.2 it should work (it provides exactly the same functionality as the stock ROM, so if stock does it, CROMI(-X) does it, too).
4. If I back up all the current settings using Titanium, do I need to do it in both profiles? Or should I simply do a simgle backup from root?
Click to expand...
Click to collapse
I have no idea, so I'd better shut up here.
Any help would be much appreciated.
Cheers, R
Click to expand...
Click to collapse

@ Tylorw1, mbamberg, MartyHulskemper
Wow. Thanks very much for the very quick replies. I'll use your info and get installing today.
Thanks again!

You may find this useful. It discusses backing up multiple user accounts in 4.2 with superuser (assuming ChainsDD but could be CWM) and TB. How this works with other superuser apps (superSU, superuser X) is TBD. Here is the key finding:
sbE said:
Non-Primary Users CAN get root access. I used superusers multi-user Mode (owner controlled) and TiBa gets root access on my secondary users. Without superusers multi-user feature TiBa doesn't get root rights...i tried it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2105659

I was also wondering about DATA2SD. OP did you format your SD card and get it to work? When you install ChromiX it asks you if you want to install Data2SD. Will that option not work if you dont have your external SD card formatted correctly?

wl123 said:
I was also wondering about DATA2SD. OP did you format your SD card and get it to work? When you install ChromiX it asks you if you want to install Data2SD. Will that option not work if you dont have your external SD card formatted correctly?
Click to expand...
Click to collapse
Yes, you have to correctly format and partition your external SD with Gparted for Data2SD to work.
Read the forums before you do this. Data2SD can be a mine field and does not give you the performance boost it once did IMHO.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

For the love of God use GPARTED to partition it seems a long effort to go but using any other will and has done to me broke my micro SD.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

wl123 said:
I was also wondering about DATA2SD. OP did you format your SD card and get it to work? When you install ChromiX it asks you if you want to install Data2SD. Will that option not work if you dont have your external SD card formatted correctly?
Click to expand...
Click to collapse
Hi, sorry for the late reply... I haven't been checking back on this post. To answer your question... in the end I chose not to install DATA2SD option. I did successfully install CROMi-X 4.6.1 and everything is working really well - browsing with Chrome is amazingly fast compared to stock!!!
The only problem I've found so far is with some of my Play Store Apps not being able to load - there were a couple of apps that installed just fine on Stock Asus JB (latest version 4.2.1) but under CROMi-X they say they are incompatible with my device. I guess it probably has something to do with the DPI being used (I used the 213 DPI which was default selection during the CROMi-X installation). Might check this out in the developer thread.
Cheers, R

I've updated the boot loader in the first post of the CROMi-X thread to include the latest TW boot loader now.
Also it seems the multi-dpi version of the play store I am using has some issues showing all compatible apps. I have an alternative version to test which will hopefully resolve this and then I can release a patch.

sbdags said:
I've updated the boot loader in the first post of the CROMi-X thread to include the latest TW boot loader now.
Also it seems the multi-dpi version of the play store I am using has some issues showing all compatible apps. I have an alternative version to test which will hopefully resolve this and then I can release a patch.
Click to expand...
Click to collapse
Thanks for the heads up... just updating now. Thanks for all your great work with this ROM.

[i9103][CWM Advanced Edition] PhilZ Touch

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Special thanks to @Adam77Root for his work to make this possible
Download links
Last version can be found here:
i9103
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
http://d-h.st/users/philz_touch/?fld_id=18564#files
Click to expand...
Click to collapse

Great to see Philz at R forum. First Adam's Official Cm10.1 then Official PAC now Official Support of Philz recovery.:good:
Edit: status 0 error occurs when i flash using cwm.

Disturbed™ said:
Edit: status 0 error occurs when i flash using cwm.
Click to expand...
Click to collapse
Replace the update-binary with this.
Sent from my GT-I9103

Adam77Root said:
Replace the update-binary with this.
Sent from my GT-I9103
Click to expand...
Click to collapse
Sorry,
Missed this from your feedback PM
Just fixed the zip on download server
Now, it should flash correctly
Many thanks for the support :good:

Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:

Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)

Phil3759 said:
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Click to expand...
Click to collapse
Thanks for the quick response buddy. I will provide you the same. But its time for my B'day party.:laugh:

run's on stock ics?
Is a awesome recovery y test in s2

Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
Didn't get you buddy, come again.?

Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300

pulley06 said:
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
Click to expand...
Click to collapse
no run's on stock ics no format no flash rom's...return to CWM 5

will this file works on n7100 to?
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
do you know if this file works on n7100 to?

xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
No buddy.

xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2

Phil3759 said:
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it

xastunts said:
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
Click to expand...
Click to collapse
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2

Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
AAh damn it! i apologize! i mixed this up with the devil dual boot recovery! that one didnt have exfat support so i needed to mount another ext sd card in fat32 and swap it when i was in other roms. pretty annoying!
no ur right urs works! i know cause my exfat is inserted and booting through ur recovery all day long trying to find my soul mate os lol.
thx alot for the stuff you do for us! ur our hero!

is there a 100% full format option in ur recovery?
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago. http://icons.media.xda-developers.com/images/editor/separator.gif
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour

xastunts said:
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
Click to expand...
Click to collapse
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data

Phil3759 said:
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Click to expand...
Click to collapse
thx alot for reply! deeply appreciate it!:angel: how about using ur aroma browser that is built in inside the recovery and mark all files and just delete them ? will i be able to reboot into recovery mode after that? i was thinking that recovery files where flashed into a flash memory outside the phones internal memory to be a fail safe place harmless for beeing erased unless flashed with odin or flashed with any compatible recovery we got availible. am i right about this?
so my short question again is can i mark all folders and files and delete them directly through the built in aroma browser?
:good:
im willing to write you good comments and review here or on youtube if it is in ur demands.

[ROM] STOCK - Cube iWork 10 Flagship (i15-T) - Odexed, Deodexed, Bloated, Debloated

These are stock-based recovery flashable ROMs I've cooked up for the Cube iWork 10 Flagship (aka iWork 10 Ultimate), device i15-T(D).
They are all based on the stock build i15-T_V1.0_20160302, kernel version 3.14.37-x86_64-L1-R429 Wed Mar 2 18:22:46 CST 2016
I have tested these on my stock i15TD purchased directly from cube-tablet.com
If you are stock, unrooted with stock recovery you will need to go here first before you can use these.
WARNING: Flash at your own risk!!!
Make a full backup before flashing!
I would recommend wiping dalvik, cache, data & system before flashing.
For the Odexed versions a factory reset (dalvik, cache & data) will probably work. You might even be able to get away with a dirty flash if you're coming from the same stock build & kernel version, let me know
OTA: Will probably not work with the Stock Odexed version (I wouldn't try it anyhow) and definitely not work with any of the others as I've removed all the OTA stuff in them.​
Descriptions
Stock Odexed NoRoot 552.4 MB
-Nothing has been touched here except for changing default location/language, so it boots up in English​
Stock Odexed Debloated NoRoot 484.7 MB
-Same as above except debloated​
Stock Odexed Debloated Root 489.0 MB
-Same as above and rooted​
Stock Deodexed Debloated Root 417.03 MB
-Fully deodexed, debloated and rooted​
Stock Deodexed Debloated Root NoGoogle 368.06 MB
-All the stock google stuff has been removed so you can flash a real gapps of your choice. (I have tested opengapps pico and recommend)​
Instructions (remember, make a full backup first!)
Boot into TWRP, wipe dalvik, cache, data & system
Flash ROM
If you didn't wipe system in step 1 then go back to main screen, "Mount", select "system"
(if you're flashing the NoGoogle version, then flash gapps now)
Reboot
Enjoy
Thanks
@SuperR. -for the great kitchen
@vampirefo -for TWRP
Downloads
Stock Odexed NoRoot: Android FileHost or BasketBuild
Stock Odexed Debloated NoRoot: Android FileHost or BasketBuild
Stock Odexed Debloated Root: Android FileHost or BasketBuild
Stock Deodexed Debloated Root: Android FileHost or BasketBuild
Stock Deodexed Debloated Root NoGoogle: Android FileHost or BasketBuild
Gapps: Open GApps (select Platform x86, Android 5.1 & the variant of your choice. Note: x86_64 platfom gapps will NOT work.)
If this thread was helpful for you then please hit the "Thanks!" button!​

reserved for additional resources

new fw version
chinagadgetsreviews.com/download-latest-android-lollipop-5-1-1-stock-firmware-cube-iwork-10-flagship-tablet.html

stefan_danut said:
chinagadgetsreviews.com/download-latest-android-lollipop-5-1-1-stock-firmware-cube-iwork-10-flagship-tablet.html
Click to expand...
Click to collapse
Thanks for the heads-up man -going to get started tomorrow on cooking up some ROMs for this version...
Sent from my OnePlus2 using XDA Labs

Turns out that build (20160412) is NOT lollipop 5.1.1, still 5.1. No big differences I can tell so far except for lack of play store/services and a bit less bloat. The boot animation is different (not Chinese cube one but text "TOPWING" ???). The device ID is also different.
I think I'll be holding off on making additional zips for this until there's a more serious and official update...
Sent from my OnePlus2 using XDA Labs

Hi jet, thanks for the tutorials!
I tried to install gapps but I get the error that there's insufficient storage available in system.
Did you get the same error? I'd like to use the stock installer.
According to the logs I have NO free system space.
Edit: I fixed it, might want to mention that you shouldn't forget to mount system!

UsernameNotRecognized said:
Hi jet, thanks for the tutorials!
I tried to install gapps but I get the error that there's insufficient storage available in system.
Did you get the same error? I'd like to use the stock installer.
According to the logs I have NO free system space.
Edit: I fixed it, might want to mention that you shouldn't forget to mount system!
Click to expand...
Click to collapse
Yeah, I didn't add it initially because if one wipes system before flashing then it's already mounted. It's the weird location of system partition on this tablet, opengapps (and supersu) install scripts can't mount it.
But, yeah it should be there as you pointed out, so I added it.
Thanks, and enjoy!

jetfin said:
Yeah, I didn't add it initially because if one wipes system before flashing then it's already mounted. It's the weird location of system partition on this tablet, opengapps (and supersu) install scripts can't mount it.
But, yeah it should be there as you pointed out, so I added it.
Thanks, and enjoy!
Click to expand...
Click to collapse
Ow, yeah, I had to because TWRP has issues remounting an otg mounted storage device, that might explain why it failed for me.
I just tried installing xposed and it got stuck in a bootloop, not a big issue as I've backed it up and haven't done much so far, but do you know if it's possible to install it?
And, heck, because I'm asking anyway, have you tried reinstalling windows? I'd like to install windows 10 enterprise on this tablet. Might save me the trouble from going to techtablets.

UsernameNotRecognized said:
I just tried installing xposed and it got stuck in a bootloop, not a big issue as I've backed it up and haven't done much so far, but do you know if it's possible to install it?
And, heck, because I'm asking anyway, have you tried reinstalling windows? I'd like to install windows 10 enterprise on this tablet. Might save me the trouble from going to techtablets.
Click to expand...
Click to collapse
I haven't tried xposed yet myself on this tab, but one guy over on my howto thread mentioned he tried and also ended up in a bootloop. Too much other stuff going on now but when I get around to xposed, if i get it working, I'll post here.
Sorry, can't help you on the windows side at all, in fact this iWork 10 is the first windows machine I've had in years, just android & ubuntu for me these days...
The people at techtablets are more keyed into the windows side of this tab, especially Laura. I'd recommend asking there.

It's the same tablet this and mine that have a Dual Boot (Windows 10 + Android 5.1.1).
And guys, any web page to follow curiosity of this tablet? mods, ROMS, etc...

What I *really* dislike about this tablet:
NO XPOSED... always destroys the bootup of android...
sdk22 x86 is the correct version, but not supported by this tablet... meh

jetfin said:
These are stock-based recovery flashable ROMs I've cooked up for the Cube iWork 10 Flagship (aka iWork 10 Ultimate), device i15-T(D).
They are all based on the stock build i15-T_V1.0_20160302, kernel version 3.14.37-x86_64-L1-R429 Wed Mar 2 18:22:46 CST 2016​
Click to expand...
Click to collapse
Are these images for "Cube iWork 10 Flagship (i15-TC)" ?

Guys i need someone to tell me the network adapter name, because i installed new windows 10 and now i cannot find the network adapter driver.

Pls help, how to root td version? Need video tutorial

Hello everyone.
What is the available space of Android and Windows partition at the beginning?

No-one can answer this simply question??
Sent from my m1 note using Tapatalk

Help pls

Hi jet,
I flashed i15-T_Stock_Deodexed_Debloated_Root_NoGoogle.zip and open_gapps-x86-5.1-pico-20160917.zip,everything went okay except when I try to download apps from play store it shows downloading then it says can't download,what can be the reason for that? Or what can I do ?

demanik said:
Are these images for "Cube iWork 10 Flagship (i15-TC)" ?
Click to expand...
Click to collapse
No
Sent from my ONE A2003 using XDA Labs

abu laving said:
Hi jet,
I flashed i15-T_Stock_Deodexed_Debloated_Root_NoGoogle.zip and open_gapps-x86-5.1-pico-20160917.zip,everything went okay except when I try to download apps from play store it shows downloading then it says can't download,what can be the reason for that? Or what can I do ?
Click to expand...
Click to collapse
I've had similar before on other devices, flashing a different opengapps (like nano instead of Pico) or older opengapps or even other gapps package has usually worked... Note that you would want to reflash the rom and immediately following flash the gapps
Sent from my ONE A2003 using XDA Labs