Database Info

[ROM][ICS 4.0.3][GT-5113] CleanRom v1.1 6/3/2012

I Proudly Present the first Custom Rom available for the Samsung Galaxy Tab 2 10.1 (GT-P5113)​
What is this you ask:
This is a slightly modified version of the most current stock ROM available for the Galaxy Tab 2 10.1 (GT-P5113).
Notice for CleanRom v1.0 users:
The update instructions are below the installation instructions. Updating to the newest version will NOT remove any of your settings or data as long as you do not Wipe Data / Factory Reset.
Changlog:
Code:
Version 1.1:
1. Moved Dropbox to Data so it can be removed
2. Removed SuperSU and added Superuser to resolve some issues.
3. Added download containing removed apk files (See details below)
Features so far:
-Stock, Rooted, Deodexed, Zipaligned
-Removed a bunch of bloat applications
-Removed crap bookmarks
That's about it.
Pre-requisites:
1. You must have the custom recovery installed from the Rooting thread. (If you are going to install this you do not have to install the root zip file, this rom is already rooted.)
Installation Instructions: (Update instructions below)
1. Download to external sdcard
2. Reboot to recovery
3. Make a nandroid backup Highly Recommended
4. Data Wipe/Factory Reset REQUIRED for new installations
5. Flash Rom
6. Reboot and enjoy
Update Instructions:
1. Download the latest version to your external sdcard
2. Reboot to recovery
2a. Looks like you may need to wipe data (Some people are reporting issues with Wifi if they do not wipe data.)
3. Flash Rom
4. Reboot and enjoy
Flashing the rom on my device takes about 1.5 minutes or less, but the first boot will take about 2.5 minutes, and then another 30 seconds or so to format the applications. After the first boot it will boot up much faster.
Further Information:
Since this is basically a very minimally modified version of the stock Rom there is no need to post screenshots.
Removed Apps:
Below in the download section you will find a zip file containing all of the apk files that have been removed from stock during the process of building this Rom. Some of them will allow you to simply install, but other will require a little more effort:
To install apks manually that will not install themselves you will have to do the following:
1. Move the apk file to the /system/app/ folder with a root enabled file explorer
2. Reboot you tablet.
Download Links:
Version 1.1 (Current release)
Dropbox Download v1.1
Google Drive Download v1.1
MD5: 530ba66c73a052a486f2e28a3d725a7c
Removed Apps download:
Removes Apps (Dropbox Link)
Removed Apps (Google Drive link)
MD5: ed75336fb4693b1c7361a9fa1a85d0a1
Version 1.0:
Dropbox link: Download v1.0
Google Drive link: Download v1.0
MD5: fff31853881ba6d7c6a91c5a013fdb23
Let me know if you have any issues with Google Drive, and I can look into hosting it somewhere else also.
Special Thanks to:
martijn.vanpoorten For providing faster Dropbox hosting for this Rom!

Saved in case I need in the future!

Will this also work on P5110? Will be getting mine next week.
Sent from my Galaxy Nexus using Tapatalk 2

zyonee said:
Will this also work on P5110? Will be getting mine next week.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I am not really sure if it will or not since I only have the P5113. Do you know what the difference in the P5110 is?
Edit:
Took a quick look at a spec sheet and the only thing I noticed was that it looks like the P5110 might not have the IR?

sgrant said:
I am not really sure if it will or not since I only have the P5113. Do you know what the difference in the P5110 is?
Click to expand...
Click to collapse
Regional stuff only, I think, but if there are firmware files that differ between countries because of wifi channels, etc, it could be a problem. Never mind, I'll try it anyway. Might steal vendor files from a backup made before the flashing of your ROM.
Sent from my Galaxy Nexus using Tapatalk 2

The P5110 is without 2G/3G GSM Unit.
thor670

thor670 said:
The P5110 is without 2G/3G GSM Unit.
thor670
Click to expand...
Click to collapse
The P5113 does not have 2G/3G either.

I am looking forward to test this rom

I'm looking at creating a similar ROM for the 5100 (3G version) but I'm running into some issues during the framework de-odex.
@sgrant: if you have any pointers as to the tools or methods you use to actually make it work, I'd appreciate it.
Peace,
C.

Omg! Soo excited to try this!
Sent from my Nexus S using XDA

cheatman said:
I'm looking at creating a similar ROM for the 5100 (3G version) but I'm running into some issues during the framework de-odex.
@sgrant: if you have any pointers as to the tools or methods you use to actually make it work, I'd appreciate it.
Peace,
C.
Click to expand...
Click to collapse
If I had to guess I would say that you are targeting the wrong framework. Make sure you are targeting framework 15.
Regarding tools, I use Android Kitchen, but I DO NOT allow it to convert my updater-script to an update-script. Basically this means I can only use a few of the features of Android Kitchen:
1. Deodex Files
2. Zipalign
3. Create and sign zip
You may be able to use a few more things without the update-script, but I had troubles anytime I let Kitchen create it.
If you need more help create a thread in the Q&A forum and PM me the link. That way others will have a better time finding the information.

Clean ROM test results
Before you install the Clean ROM v1.0, know the following:
1. You MUST do a factory/reset in CWM5 (the CWM you install from my OP)
2. Factory Reset will NOT delete EVERYTHING on your external SD card
3. Installing Clean ROM V1.0 will NOT damage your CWM5.
4. I personally tested the Clean ROM V1.0 today. Runs smooth and it has some of the "bloatware" that can't be removed from the standard stock ROM. I detected an ever-so-slight improvement in smoothness & speed.
5. This ROM has NOT been tested on ANY Tab2 other than GT-P5113 at this time.
Bottom Line: We have our first SAFE custom ROM for the Tab 2 10.1 GT-P5113.
Thank you sgrant !
Glenn

weltwon said:
Before you install the Clean ROM v1.0, know the following:
1. You MUST do a factory/reset in CWM5 (the CWM you install from my OP)
2. Factory Reset will delete EVERYTHING on your external SD card
3. Installing Clean ROM V1.0 will NOT damage your CWM5.
4. I personally tested the Clean ROM V1.0 today. Runs smooth and it has some of the "bloatware" that can't be removed from the standard stock ROM. I detected an ever-so-slight improvement in smoothness & speed.
5. This ROM has NOT been tested on ANY Tab2 other than GT-P5113 at this time.
Bottom Line: We have our first SAFE custom ROM for the Tab 2 10.1 GT-P5113.
Thank you sgrant !
Glenn
Click to expand...
Click to collapse
Thank you Glenn!
But are you sure that the factory reset is deleting stuff from your external SD card? It is not deleting anything at all from my sdcard.

Factory reset does NOT wipe external SD card
sgrant said:
Thank you Glenn!
But are you sure that the factory reset is deleting stuff from your external SD card? It is not deleting anything at all from my sdcard.
Click to expand...
Click to collapse
My mistake. When I tried to access my external card using Astro File Manager it said the card was 100% blank and not even formatted. Removed SD card from Tab, plugged into my desktop PC and saw that all my files/data is still on the external SD card. I have corrected my posts accordingly.
Glenn

Excited to test this when I get home today!! Thank you for your work!

Drive link isn't working for me. It takes me to a sign up page that tells me that I need to upgrade my Flash player ? After redirect to play store I get error saying I don't have enough storage space, I do have a 32 gb card installed with 28+ gb of free space. :-O
Pp.
Sent from my GT P-5113 using xda HD that does not force close everytime I hit submit.

PanchoPlanet said:
Drive link isn't working for me. It takes me to a sign up page that tells me that I need to upgrade my Flash player ? After redirect to play store I get error saying I don't have enough storage space, I do have a 32 gb card installed with 28+ gb of free space. :-O
Pp.
Sent from my GT P-5113 using xda HD that does not force close everytime I hit submit.
Click to expand...
Click to collapse
It shouldn't make you sign up. Let me see about putting up another link somewhere.
Give me a few.
Edit:
Try this: Download

We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?

kalel90 said:
We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?
Click to expand...
Click to collapse
perhaps sth. like this could help
http://forum.xda-developers.com/showthread.php?t=1405041
http://forum.xda-developers.com/showthread.php?t=717437

kalel90 said:
We really really need the stock rom in odin flashable form lol Does anyone know if there's one out yet or how we could accomplish getting this?
Click to expand...
Click to collapse
The 7 inch version has the stock odin tars for the 3113. I've seen stock tars for the p5100 and p5110 on sammobile and sampro.pl, but nothing yet for the p5113.
Sent from my GT-P5113 using XDA Premium HD app

[Q] the best and the latest custom rom for htc chacha

please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it ​

ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it ​
Click to expand...
Click to collapse
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659

shinjitsunokami said:
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659
Click to expand...
Click to collapse
thanks for help
and thanks for Respect me

yeah, CM11 looks so good. i also use it for daily.

Modded Stock Rom
ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it ​
Click to expand...
Click to collapse
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)

rickyjsharma said:
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)
Click to expand...
Click to collapse
can you upload your ROM mate, best regards

Will Try to Upload today
swashie said:
can you upload your ROM mate, best regards
Click to expand...
Click to collapse
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.

My friend has aChaCha with 2.5.3 version or something similar. Which ROM should i update to which would be stable for a normal user and maintenance free.
Is it easy to install ROMs in HTC. I have flashing experience only with Samsung
Sent from my GT-N7100 using Tapatalk

I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
rickyjsharma said:
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.
Click to expand...
Click to collapse

Kevinreid1 said:
I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
Click to expand...
Click to collapse
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS

CM11 For the win

dheon5 said:
CM11 For the win
Click to expand...
Click to collapse
I tried several custom ROMs. One of the best concerning battery and memory usage was SuperOSR 2.5, but it's only Android 2.x.
For Android 4 i prefered CM 10.1 since you don't have much RAM with CM11.
However I changed back to the standard ROM now since I bought the Chacha because of its keyboard, and none of the custom ROMs had a good keyboard support. There even where problems when using the keys for dialing, re-dialing, entering numbers during a call, searching for apps in the list etc. Plus that you can't use your Facebook-Button (for flashlight in my case).
I don't even miss Android 4 - it seems that all apps I need are available for 2.3.5 so far. Latest apps will have problems with this screen anyway.

SD Card Missing or not mounted
rickyjsharma said:
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS
Click to expand...
Click to collapse
So is there a way to use this with sd card? I formatted ext2 has primary should I have made it a logical drive instead also have 100mb linux swap I think it's logical.
Also unrelated to the above is there any way to update to play store and play services to use hangouts or is 2.3 android stuck without play services? it downloads but says its not able to install. I said unrelated but maybe it is related to me using the ext2 as primary instead of logical...

BT carkit call problem...
This ROM is great but for me calls with my bluetooth carkit doesn't work.
I can pair devices, sync contacts, make a call but after that I hear only some noise.
Is there any fix or workaround?
thx

really
really its a good device for use roughly.

[ROM][OFFICIAL] LineageOS 14.1 Nightlies for the Verizon Samsung Galaxy S3 (d2vzw)

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Download Links
LineageOS:
Downloads: https://download.lineageos.org/d2vzw
Google apps addon:
OpenGapps: http://opengapps.org/ (you'll want a zip for the ARM platform, Android version 7.1)
HEADS UP: Be sure you flash the gapps package with your rom. If you boot your rom, then go back and try to flash gapps after the fact, you're gonna have a bad time.
Firmware:
Your best bet is to be on the MF1 bootstack/NE1 modem combo. Here's a flashable zip (this only needs to be done once): http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
Misc Links
Changelog:
Link: https://download.lineageos.org/d2vzw/changes/
Learn to build yourself:
Link: https://wiki.lineageos.org/devices/d2vzw/build
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][OFFICIAL] LineageOS 14.1 Nightlies for the Verizon Samsung Galaxy S3 (d2vzw), ROM for the Verizon Samsung Galaxy S III
Contributors
invisiblek
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-05
Last Updated 2016-12-05

reserved

Hallelujah!
Is this the eighth or ninth life of this great phone?

@invisiblek, are there plans for the release of a Snapshot of CM13.0 for the d2vzw?

Congratulations on the "official" release!! Thank you for such an excellent and stable ROM for our ooooold, but no longer irrelevant, s3!

Nice job! Wich partitions can I mount as f2fs?

Just out of curiosity regarding the CM14.1...
Anyone having issue with internet connectivity specifically with the Play Store only (downloaded from Open GApps)?
Also, is anyone having issues with their external MicroSD. Though the external MicroSD can be viewed and can browse it, I'm Specifically stating the inability to execute, open, write to, etc...?
I had already sent the issues I'm having along with all my log files to @invisiblek and was curious as to any others experiencing the same/similar issues I experienced.
Thank you all for your time and understanding!

Thank you @invisiblek and other contributors. This is a great rom for this old phone. My DD is a LG G4, again, I went back to that after three Note 7's and all that drama. It's sad when a years old Galaxy S3 is running the latest and greatest but my LG G4 is still on last years Android! Yikes
I'm only using the SGS3 as a Wifi device so I can't comment on Cell radio functions but it's very smooth and seems markedly faster than when I was last using it as a DD. The only issue I've had and it may not even be related to this rom... I wanted to use Chainfire's PryFi to stick it to Kohls and Walmart that use WiFi Mac trackers, but when I launch PryFi and turn it on, it almost immediately crashes no matter what I do. Wipe cache, dalvik, reset and I get the same thing.
Thanks for the great work. Much appreciated!

@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs

Ibuprophen said:
@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )

Master Cylinder said:
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )
Click to expand...
Click to collapse
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs

Ibuprophen said:
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111

Stealth111 said:
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111
Click to expand...
Click to collapse
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Q: Is your external card formatted as "portable storage", or is it formatted as "Adopted storage".
A: Portable Storage.
Q: Also what type of filesystem do you have the card formatted with?
A: VFAT
Q: What file manager are you using to try to access your card with?
A: Stock & ES File Explorer Pro
Q: Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom?
A: I'm aware of the stock root manager but, i've always preferred SuperSU's root management.
I really appreciate your assistance and please don't hesitate to defer to @invisiblek if necessary.
Also, please keep in mind that I'm not in a race. Take your time because patience is a virtue...
Thank you very much!!!
I wonder if the GApps issue is the underlying issue. I hope @MastahF & @Rapper_skull is aware of and working on it?
Sent from my d2vzw using XDA Labs

Stealth111 said:
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials.
Stealth111
Click to expand...
Click to collapse
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Ibuprophen said:
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Click to expand...
Click to collapse
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.

Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Click to expand...
Click to collapse
I have the same version as well. I go to the store, click install on the Pro version. It installs just fine... I then go in and open the program, it immediately asks for the needed root permissions, which I promptly give it, then I close the welcome message. When I actually then click install from within the program, it then tries to install for about 2 seconds and then says "oops, it looks like the installation was unsuccessful, maybe try a different location"....
Who knows.... :laugh:
Other than that, I agree, purring like a kitten!
Stealth111

Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.
Click to expand...
Click to collapse
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs

Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Sent from my Pixel using XDA Forums Pro.

Ibuprophen said:
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.

Pierre2324 said:
Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Click to expand...
Click to collapse
Here's a link that, i believe, will answer your question:
http://forum.xda-developers.com/showthread.php?t=2537119
Good Luck!
Sent from my d2vzw using XDA Labs
---------- Post added at 02:14 AM ---------- Previous post was at 01:54 AM ----------
Master Cylinder said:
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.
Click to expand...
Click to collapse
There was a member in the GApps thread who had mentioned that he had a similar issue.
He stated that what worked for him was flashing a GApps Pico package on from about 30 days ago.
I believe that others had to flash their GApps packages from about 30 days ago had worked for them.
I know that this is an issue for many others who also reported it to the Dev(s).
I can't think of what in the world is going on...
Sent from my d2vzw using XDA Labs

Running smooth as ice.......only issue I've had was a single browser hicup. Incredible work, makes me smile knowing I have a newer version on my ancient phone than most of the $700+ flagship phones. Invisablek you sir are the man:good:

Samsung J120W -Deodexed, Rooted, Busybox,

Samsung J120W -exynos 3475
This is a Stock ROM of Samsung J1 Canadian it's pre-rooted and busyboxed . Lots of space after I debloated it . People are free to do whatever they want with this ROM . I'm working on porting MIUI 8 right now but having trouble booting up . If anyone wants to help me with MIUI send me a pm and I'll upload it .
-Deodexed
-De-bloated
-Deknoxed
-Busybox and Rooted
google drive
https://drive.google.com/file/d/1S35WyQFccuOt6hZD6FADCPDJwVhm8EjP/view?usp=sharing

Duanepiche99 said:
Samsung J120W -exynos 3475
This is a Stock ROM of Samsung J1 Canadian it's pre-rooted and busyboxed . Lots of space after I debloated it . People are free to do whatever they want with this ROM . I'm working on porting MIUI 8 right now but having trouble booting up . If anyone wants to help me with MIUI send me a pm and I'll upload it .
-Dedeodexed
-De-bloated
-Deknoxed
-Busybox and Rooted
google drive
https://drive.google.com/file/d/1S35WyQFccuOt6hZD6FADCPDJwVhm8EjP/view?usp=sharing
Click to expand...
Click to collapse
Hello. I would like to try this one out! By "debloating" what has been removed? Also, do I just flash the file within TWRP once performing a full wipe except external sd card? Is this Android 5.1.1 or 6.0.1? Thanks!

All the unnecessary stuff . and All the Google stuff except play store . And it's 6.0 marshmallow

Duanepiche99 said:
All the unnecessary stuff . and All the Google stuff except play store . And it's 6.0 marshmallow
Click to expand...
Click to collapse
Ok thanks for the reply!

Duanepiche99 said:
All the unnecessary stuff . and All the Google stuff except play store . And it's 6.0 marshmallow
Click to expand...
Click to collapse
Any pointers on installing through TWRP. Just wondering which partitions to wipe before flashing.

Just do a regular factory wipe threw TWRP . That's it .

i have a chatr phone thats a j120w thats got a problem with frp lock. will this help me around my problem?
spent seven hours trying to fix it last night and couldnt get it done, custom binary blocked by frp lock, impossible to access the internal storage and can't run anything off the sd card. cant get twrp or SR1-SuperSU-v2.78-SR1-20160915123031 onto the phone

DaDirtiest said:
i have a chatr phone thats a j120w thats got a problem with frp lock. will this help me around my problem?
spent seven hours trying to fix it last night and couldnt get it done, custom binary blocked by frp lock, impossible to access the internal storage and can't run anything off the sd card. cant get twrp or SR1-SuperSU-v2.78-SR1-20160915123031 onto the phone
Click to expand...
Click to collapse
i had this issue too a few months back i might be bit late but for others looking in the future go to updato.com and search your model# then install your stock firmware and flash it on odin3 boot into downloaders mode too

Duanepiche99 said:
Just do a regular factory wipe threw TWRP . That's it .
Click to expand...
Click to collapse
How do you install twrp without recovery img can't find one for j120W anywhere including TWRP Site

can you modify the ROM so that it can be installed on the J120G?

keithk said:
How do you install twrp without recovery img can't find one for j120W anywhere including TWRP Site
Click to expand...
Click to collapse
A bit late maybe, but I use this recovery and even though a little dusty for some at 3.0.2 it works the best out of any i've tried. Also using SM-J120W.
Unzip and flash the .tar in odin.

FIle
Duanepiche99 said:
Samsung J120W -exynos 3475
This is a Stock ROM of Samsung J1 Canadian it's pre-rooted and busyboxed . Lots of space after I debloated it . People are free to do whatever they want with this ROM . I'm working on porting MIUI 8 right now but having trouble booting up . If anyone wants to help me with MIUI send me a pm and I'll upload it .
-Deodexed
-De-bloated
-Deknoxed
-Busybox and Rooted
google drive
https://drive.google.com/file/d/1S35WyQFccuOt6hZD6FADCPDJwVhm8EjP/view?usp=sharing
Click to expand...
Click to collapse
Please @Duanepiche99, i need this file. In google i don't found...
Bye

todonormal said:
Please @Duanepiche99, i need this file. In google i don't found...
Bye
Click to expand...
Click to collapse
Get linux and put stock into superr's kitchen.
Works flawlessly and if you have any questions pm me. Or i'll do one for you tomorrow. It takes the addiction to a new level and you have control.

mindlery said:
Get linux and put stock into superr's kitchen.
Works flawlessly and if you have any questions pm me. Or i'll do one for you tomorrow. It takes the addiction to a new level and you have control.
Click to expand...
Click to collapse
@mindlery : Please, i need your help. This it's the rom: https://www.sammobile.com/samsung/g...e/SM-J120W/RWC/download/J120WVLS2AQK1/198146/ I need Deodexed, De-bloated, Deknoxed, Busybox and Rooted in spanish (if it's possible, rom not include. English it's other option). I don't know superr's kitchen, and i don't have linux in this moment. Thank you very much for your help
NOTE: i found a procedure for change language, in other model, but i don't know if it's possible with it's procedure:
https://www.clangsm.com/forum/index.php?showtopic=487032

todonormal said:
@mindlery : Please, i need your help. This it's the rom: https://www.sammobile.com/samsung/g...e/SM-J120W/RWC/download/J120WVLS2AQK1/198146/ I need Deodexed, De-bloated, Deknoxed, Busybox and Rooted in spanish (if it's possible, rom not include. English it's other option). I don't know superr's kitchen, and i don't have linux in this moment. Thank you very much for your help
NOTE: i found a procedure for change language, in other model, but i don't know if it's possible with it's procedure:
https://www.clangsm.com/forum/index.php?showtopic=487032
Click to expand...
Click to collapse
Hey. Sorry for being so late to reply.
Fell on some hard times. I'll do my best in the next week to help you out if you still need it.
But doing pretty bad over here.... i'll be ok and all, just my situation is not good. Take care and let me know, bud.

mindlery said:
Hey. Sorry for being so late to reply.
Fell on some hard times. I'll do my best in the next week to help you out if you still need it.
But doing pretty bad over here.... i'll be ok and all, just my situation is not good. Take care and let me know, bud.
Click to expand...
Click to collapse
Thank you for your response. I wait what better your situation
I install virtualbox, ubuntu4kitchen and i can create deoxeded, root, debloated, but it's very large. More what original...

todonormal said:
Thank you for your response. I wait what better your situation
I install virtualbox, ubuntu4kitchen and i can create deoxeded, root, debloated, but it's very large. More what original...
Click to expand...
Click to collapse
That's odd.
The way i do linux is to have a preset unallocated disk partition in windows.
Since i often "wreck" my set up by constant tweaking, i always install windows by wiping all partitions and leaving half the disk unallocated.
But! You can shrink your windows disk partition in disk management within windows. So for example if your windows hd is one partition and 500 gb, maybe cut it down to 300 gb leaving 200 gb unallocated.
You can then do a restart while holding shift until you get a recovery screen.
Of course, prior to the shift/restart mode you'll have prepared already a USB flash drive with linux (mint is very user friendly) from a program called rufus...
Seems a bit much but really all you're doing is preparing a linux OS to usb that you boot into, then install. It'll automatically choose the unallocated partition. So, when proceeding with install by default linux will have the option to install alongside windows highlighted. Of course then continue.
Any more questions feel free to ask. It's a bit daunting at first but overall a very simple process.
The only part you may have difficulty with is dependent on your file choice in rufus. Try default settings and if GPT fails do it over with MBR.
---------- Post added at 05:44 AM ---------- Previous post was at 05:38 AM ----------
May i add, once you have linux you can try the free version of superr and it is great for what you want to do.

Download link shows Error 404 Not Found

[DISCUSSION] LineageOS 17.1 [HLTE/CHN/KOR/TMO][OFFICIAL]

Can we continue to discuss topics about the new - big thx to devs, btw! - official 17.1 version in this thread, pls?
(I know the differences to the unofficial version(s) might be minimal - or even null? - however I think it's always of value to be as clear, sharp and crisp avoiding ambiguities, esp. for folks who are not too familiar with the different contexts)
BTW: just for the record my (dirty) upgrade path from lineage-16.0-20201003-nightly-hlte-signed.zip version to lineage-17.1-20201010-nightly-hlte-signed.zip was as follows:
DLed / copied off my NAS the files of lineage-17.1-20201010-nightly-hlte-signed.zip, open_gapps-arm-10.0-nano-20201010.zip and Magisk v20.4 to external SD)
Let the system DL and install recent pending updates
Rebooted into Recovery (twrp-3.4.0-1-hlte)
Created a nandroid backup of Boot, System, Data and EFS partition to internal SD (and copied those to the external SD, plus a further copy to my NAS)
Wiped Dalvik / ART Cache, System and Cache partition
Installed LOS and GApps
(Dirty) Rebooted into System letting the system run a couple of minutes, checking for updates etc.
Rebooted into Recovery
Installed Magisk
Wiped Dalvik / ART Cache
Rebooted into System
(Enabled systemless host file in Magisk to support Adaway Adblocker app)
PS: This thread has been moved off the Development Folder by a Forum Moderator

Quick questions:
1. Does that AdAway work well?
2. Does automatic dark mode work for you? I have to turn it on manually. Maybe due to turned off GPS so it can't get my location and set sunrise and sunset times?

asassello said:
Quick questions:
1. Does that AdAway work well?
2. Does automatic dark mode work for you? I have to turn it on manually. Maybe due to turned off GPS so it can't get my location and set sunrise and sunset times?
Click to expand...
Click to collapse
1 : yes
2 : yes..update maybe your modem

re 1: yes2 (using it quite some time on various devices and it seems to do what I expect it should do, though some apps seem to bypass the 'normal' DNS resolution. OT: And I'm still haven't made up my mind yet if DoH or DoT are good or bad ...)
re 2: dark mode? What's that?

rayman95 said:
1 : yes
2 : yes..update maybe your modem
Click to expand...
Click to collapse
Are you sure NFC works? I mean paying in shops? I updated modem and now it's N9005XXUGPQB1. And paying still doesn't work. I've just tried.
odoll said:
re 2: dark mode? What's that?
Click to expand...
Click to collapse
Sorry. It's dark theme (I don't have English set as default language). [emoji846]

installation error

https://download.lineageos.org/hltetmo

Can somebody please confirm that paying through NFC works? If so - what's your modem and baseband?
Also I've installed GAPPS PICO maybe that's the case? Although on LOS 16 I also had Pico and it worked, but maybe I'm missing some app like Google search or something?

Been using Lineage OS 16 ever since it was officially released for HLTE. I gotta say, the development of that release has came a long way and by the time of writing this, I'd say it's the most stable and clean custom rom for the Note 3 out there.
I did try the new release the second I received a notification for an update. How did it go? Well let's just say I'm glad I created a full system backup before wiping LOS 16. This new release is still very buggy, unpolished and missing a lot of features. Nothing that will render your phone unusable, but compared to 16, it doesn't stand a chance, which is understandable.
I do appreciate all of the time that the devs are still willing to put into the platform. However I'd recommend users that are looking for a rock stable experience to stick with Lineage OS 16 for the time. You're not missing out on a lot.

loudseries said:
This new release is still very buggy, unpolished and missing a lot of features. Nothing that will render your phone unusable, but compared to 16, it doesn't stand a chance, which is understandable.
Click to expand...
Click to collapse
I think your statement will get more weight, when it will be supported with some facts:
It'd be helpful if you would underpin your statement with some of your findings about e.g. which bugs you found and which features you are missing!? thx

odoll said:
I think your statement will get more weight, when it will be supported with some facts:
It'd be helpful if you would underpin your statement with some of your findings about e.g. which bugs you found and which features you are missing!? thx
Click to expand...
Click to collapse
I have to agree with you, because except my 2 issues (with NFC payments and night mode that doesn't switch automatically) I actually don't have any other problems.
Ver. 17 seems faster and snappier than 16.
Also on 16 sometimes sharing from ie. Firefox to WhatsApp caused the later one not loading (just black screen).
So for me only that NFC seems to be a real issue. Other than that I'd advice anyone trying 17.

made a clean flash with nanodroid and last lolz..the rom is mostly usable ..
got sometimes, not often some little freezes and stock music stop..otherwise it's reliable
both options, stay on 16.0 for stability or move to 17.1 are possible...

rayman95 said:
made a clean flash with nanodroid and last lolz..the rom is mostly usable ..
got sometimes, not often some little freezes and stock music stop..otherwise it's reliable
both options, stay on 16.0 for stability or move to 17.1 are possible...
Click to expand...
Click to collapse
for me the only difference is the size of the home screen changed (changed trebuchet to a larger grid before), otherwise i would not even have noticed it is not 16 anymore, rock stable even after a dirty flash

rayman95 said:
made a clean flash with nanodroid and last lolz..the rom is mostly usable ..
got sometimes, not often some little freezes and stock music stop..otherwise it's reliable
both options, stay on 16.0 for stability or move to 17.1 are possible...
Click to expand...
Click to collapse
Yea,i have the same issue . Sometimes works okey and sometimes phone is just unresponsive, freezing. Youtube vanced most of the time stuck while screen is turned off ect.
Some really weird stuff there but I'm sure all will be okej later on.
Btw what BL and CP u using?

Scorpionea said:
Yea,i have the same issue . Sometimes works okey and sometimes phone is just unresponsive, freezing. Youtube vanced most of the time stuck while screen is turned off ect. Some really weird stuff there but I'm sure all will be okej later on.
Btw what BL and CP u using?
Click to expand...
Click to collapse
I'm on PQB1 nordic modem and BRL1 bootloader.

rayman95 said:
I'm on PQB1 nordic modem and BRL1 bootloader.
Click to expand...
Click to collapse
Have the same as you . I thought it could be bootloader issue but guess not.
Thx

Dirt update and no more freezes issues...I don't know if it's a the new rom or the dirt update... Anyway, but now got dl issues..browser fc when I want to dl a file...

odoll said:
Can we continue to discuss topics about the new - big thx to devs, btw! - official 17.1 version in this thread, pls?
(I know the differences to the unofficial version(s) might be minimal - or even null? - however I think it's always of value to be as clear, sharp and crisp avoiding ambiguities, esp. for folks who are not too familiar with the different contexts)
BTW: just for the record my (dirty) upgrade path from lineage-16.0-20201003-nightly-hlte-signed.zip version to lineage-17.1-20201010-nightly-hlte-signed.zip was as follows:
DLed / copied off my NAS the files of lineage-17.1-20201010-nightly-hlte-signed.zip, open_gapps-arm-10.0-nano-20201010.zip and Magisk v20.4 to external SD)
Let the system DL and install recent pending updates
Rebooted into Recovery (twrp-3.4.0-1-hlte)
Created a nandroid backup of Boot, System, Data and EFS partition to internal SD (and copied those to the external SD, plus a further copy to my NAS)
Wiped Dalvik / ART Cache, System and Cache partition
Installed LOS and GApps
(Dirty) Rebooted into System letting the system run a couple of minutes, checking for updates etc.
Rebooted into Recovery
Installed Magisk
Wiped Dalvik / ART Cache
Rebooted into System
(Enabled systemless host file in Magisk to support Adaway Adblocker app)
PS: This thread has been moved off the Development Folder by a Forum Moderator
Click to expand...
Click to collapse
Hello. I have the latest version of LineageOS 16 installed and TWRP (3.3.1.0). I ask you if, after transferring the ROM file to the phone, it is possible to use TWRP to upgrade to 17.1 (by installing the zip file) or if I have to use ADB shell (as it says on the LineageOS official site).
Sorry I'm not an expert and some steps are not clear to me
Thank you
PS
Why you wrote "dirty"
(Dirty) Rebooted into System letting the system run a couple of minutes, checking for updates etc.

Hi Apten
i) think your Qs won't need a full quote
ii) drity flashing
iii) sure you can DL the ROM (and TWRP) to your (internal RAM) of your phone and upgrade or clean install from recovery (twrp)

rayman95 said:
Dirt update and no more freezes issues...I don't know if it's a the new rom or the dirt update... Anyway, but now got dl issues..browser fc when I want to dl a file...
Click to expand...
Click to collapse
I've just dirty updated from 1010 to 1017 build . Will see how it goes later on.
Just tested with chrome downloading lineage and no issue with Fc