Hello,
I noticed that since I took the TP from the Box the volume buttons are not working as they should... it shows the volume screen and also move (like arrow key)
Someone experienced this?
I was searching google but could not find any solution or similar problem
i dont understand. sounds like it is working
I have applied a few tweaks from this forum and now when I press a volume button, either one, it brings up the volume screen as expected, but on a second press, of either button, the volume screen disappears and the volume does not change. Not sure if this is what you are seeing.
Zieden said:
I have applied a few tweaks from this forum and now when I press a volume button, either one, it brings up the volume screen as expected, but on a second press, of either button, the volume screen disappears and the volume does not change. Not sure if this is what you are seeing.
Click to expand...
Click to collapse
Same problem in my TP
mzperxfl said:
Same problem in my TP
Click to expand...
Click to collapse
This is exactly what I mean... It just show the screan but does not work. And it is since I took it out of the box... It might be possible it is bacause the Czech localization program which is not on English TPs...
If you experience this problem, do you have some special localization for keyboard?
I am having the same problem as well with my Sprint Touch Pro. Clicking either volume button once brings up the volume screen and I have to use my finger to adjust volume on the screen. Holding either volume button does not raise or lower the volume. Doing so exits the volume control screen (and then quickly brings it up again). It almost seems like it's trying to scroll in whatever program is active.
Has anyone figured out what might be causing this?
problem resolved in my case
thedino said:
This is exactly what I mean... It just show the screan but does not work. And it is since I took it out of the box... It might be possible it is bacause the Czech localization program which is not on English TPs...
If you experience this problem, do you have some special localization for keyboard?
Click to expand...
Click to collapse
I had the same problem, but I found the solution ... at least is is working for me now ...
I start to think your way ... since I am also using localization ... InterWrite 9.5
I changed some things (at least those that I remembered that I changed before). Than InterWrite asked for soft reset ... I did it and now it works.
Try to change some settings ... I disallowed support hardware keyboard (I think this was the most important) and some other settings. If it's not working for you and you use the same localization soft, write here and we can go through every tab of InterWrite and do the same settings.
AlPachino, you are genius... it was enough to swith the "Hardware Keyborad" in the Interwrite and now it works... I think we should report this bug to SW developer of that soft...
bugreport for sunnysoft
thedino said:
AlPachino, you are genius... it was enough to swith the "Hardware Keyborad" in the Interwrite and now it works... I think we should report this bug to SW developer of that soft...
Click to expand...
Click to collapse
done already
I'm also having this problem, but I don't know what InterWrite is (pretty sure i'm not using it).
Is there somewhere in the registry to reassign these buttons back to their intended purposes? I assume some people have remapped them to be UP/Down scrolling, so we probably know where the registry settings are.
slyng1 said:
I'm also having this problem, but I don't know what InterWrite is (pretty sure i'm not using it).
Is there somewhere in the registry to reassign these buttons back to their intended purposes? I assume some people have remapped them to be UP/Down scrolling, so we probably know where the registry settings are.
Click to expand...
Click to collapse
Same here... I am having the same issue and not using InterWrite.
snathanb said:
Same here... I am having the same issue and not using InterWrite.
Click to expand...
Click to collapse
yeah, I took the easy way out by flashing a new ROM. I'd still love to hear the solution, but for now that has (obviously) fixed the issue for me.
slyng1 said:
yeah, I took the easy way out by flashing a new ROM. I'd still love to hear the solution, but for now that has (obviously) fixed the issue for me.
Click to expand...
Click to collapse
I did a backup, then hard-reset, and that cured the problem.
I'm running the elite ROM right now, so it's not the ROM, it has to be one of the programs I added. So, I'm going to add them in 1 at a time and see who the guilty party is.
Edit: I put them all back in, and it now works fine. I tried replicating all the registry tweaks I had used and it still works... so I don't know what the answer is to why it was broken in the first place.
Same issue with me .
Used a hebrew localization, however, I hard resetted and re-installed and it seemed to be working fine. Now it is broken again just as you guys describe.
If anyone could find the reason or the hidden registry key, I'd be very grateful.
Happened to me too.
Did any of you have Diamond Tweaks installed? I noticed it on mine after this install. I know it has some tweaks in it for remapping scrolling. I've since hard reset, and installed everything except Diamond Tweaks. The button is still working as expected.
Fring is also a problem
I figured out that when I load Fring on mine the volume keys fail to work. I didn't have the problem on my Diamond so I'm guessing it's something to do with the (stock) ROM on the TP.
ROM: 1.90.405.1 WWE 08/01/08
Radio: 1.02.25.19
Protocol: 52.33.25.17U
Did any of you have Diamond Tweaks installed? I noticed it on mine after this install. I know it has some tweaks in it for remapping scrolling. I've since hard reset, and installed everything except Diamond Tweaks. The button is still working as expected.
Click to expand...
Click to collapse
None. In fact, it is one of the reasons I reset in the first place.
The latest thing I installed was "Startup service" but I don't see what does it have to do with it. I'll try to go to one of my recent backups and check.
Luckily I backup almost daily now (hard reset was a *****).
Just letting you guys know. So far found 2 programs that cause this behavior for me:
P.D.A.C Hebrew localization (talked to their support and they confirm the problem)
FDC Start Menu - http://www.dotfred.net/FdcStartMenu.htm
Real shame for both because I need hebrew and I liked FDC Start Menu a lot.
S2U2 1.35 will cause this problem, if you uninstall it you will be fine.. I think this should e fxed in the ne ver.
Hello,
i use the autolock feature of my raphael, but when the screen is locked, i can change the volume through the hardware buttons?!
Anyone else noticed this? Is there a workaround?
I first thought it might be related to the HTCVolumeOverlay, but i disabled this and it still works
Thanks,
FL
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=434968&page=2
I recently upgraded to a Touch Pro 2 from a Mogul, massive improvement (other than the lack of hardware keys). So I was a little worried when first using the camera, but the interface quickly grew on me. After installing everything I had on the Mogul, and a few other things that weren't previously supported, I went to snap a quick picture. But for some reason I now have to press and HOLD the shutter button for about 2 or 3 seconds while it auto-focuses then finally takes the picture. For the last week or two (since I've had the phone) I just tapped the button and it focused and took the picture, and was a lot quicker.
I've gone through all of the new cabs I've installed and looked for changes to the camera's registry settings, but found nothing (other than the enabling of the extra modes).
I've also tried changing the Key Delay settings in Advanced Config. Normally I find solutions to any problems I encounter by searching the xda forums, but this time all I'm coming up with is TP2 camera reviews, and stuff about the TP Shoot Options (which are related to the TP's hw button, I'm guessing?).
It's not a huge problem, I mean everything still works as it should. It's just kind of annoying having to hold the button and wait. Any help with this would be greatly appreciated.
I forgot to add, pressing the Enter key on the hardware keyboard still has the desired effect. It's just something with the on screen shutter button.
I'm sorry I can't provide a reply to solve your problem, but I think you might get more/better feedback if you post here.
Thanks for the suggestion =)
The reason I posted here instead of the TP2 forum is because I assumed this wasn't a specific TP2 related issue, rather a WinMo issue (if it is in fact a registry fix). But I will post there also, and hope for more feed back.
Hello everybody.
Is there anyway to disable camera hardware button on this mobile? Because the phone fell to the water and now the camera is launching in a loop and replacing the flex of the camera is not an easy task (I think the problem is there).
Thank you and apologies for my poor English I hope you understand.
JorgeXDA said:
Hello everybody.
Is there anyway to disable camera hardware button on this mobile? Because the phone fell to the water and now the camera is launching in a loop and replacing the flex of the camera is not an easy task (I think the problem is there).
Thank you and apologies for my poor English I hope you understand.
Click to expand...
Click to collapse
Go to Camera, tap the option button, then tap camera setting. Set Quick launch to OFF.
Hope it help.
pradhana said:
Go to Camera, tap the option button, then tap camera setting. Set Quick launch to OFF.
Hope it help.
Click to expand...
Click to collapse
Thank you very much.
That's what I need, and it was an easy solution to the problem, I believed that this would require hidden menus or something like that.
Thank again.
Hello everybody.
I use OmniRom Marshmallow on my OnePlus One (http://forum.xda-developers.com/oneplus-one/orig-development/6-0-omnirom-t3237484). It has a setting to disable hardware buttons and enable the softkeys. After switching off the hardware they still remain somewhat active. if I accidentally pressed any button, the screen will no longer respond to the pressing. Is it possible to somehow fix it and completely disable hw buttons?
PS. I'm new here and I can not reply to that topic.
PPS. Sorry for my bad English.
xregs said:
Hello everybody.
I use OmniRom Marshmallow on my OnePlus One (http://forum.xda-developers.com/oneplus-one/orig-development/6-0-omnirom-t3237484). It has a setting to disable hardware buttons and enable the softkeys. After switching off the hardware they still remain somewhat active. if I accidentally pressed any button, the screen will no longer respond to the pressing. Is it possible to somehow fix it and completely disable hw buttons?
PS. I'm new here and I can not reply to that topic.
PPS. Sorry for my bad English.
Click to expand...
Click to collapse
sorry i cant be of assistance, but you can mention the developer like this @herna and maybe he will stop by here to help you.
@xregs now you will have a mention from me (just showing you how it works)