[PROB] Volume buttons not working - Touch Pro, Fuze General

Hello,
I noticed that since I took the TP from the Box the volume buttons are not working as they should... it shows the volume screen and also move (like arrow key)
Someone experienced this?
I was searching google but could not find any solution or similar problem

i dont understand. sounds like it is working

I have applied a few tweaks from this forum and now when I press a volume button, either one, it brings up the volume screen as expected, but on a second press, of either button, the volume screen disappears and the volume does not change. Not sure if this is what you are seeing.

Zieden said:
I have applied a few tweaks from this forum and now when I press a volume button, either one, it brings up the volume screen as expected, but on a second press, of either button, the volume screen disappears and the volume does not change. Not sure if this is what you are seeing.
Click to expand...
Click to collapse
Same problem in my TP

mzperxfl said:
Same problem in my TP
Click to expand...
Click to collapse
This is exactly what I mean... It just show the screan but does not work. And it is since I took it out of the box... It might be possible it is bacause the Czech localization program which is not on English TPs...
If you experience this problem, do you have some special localization for keyboard?

I am having the same problem as well with my Sprint Touch Pro. Clicking either volume button once brings up the volume screen and I have to use my finger to adjust volume on the screen. Holding either volume button does not raise or lower the volume. Doing so exits the volume control screen (and then quickly brings it up again). It almost seems like it's trying to scroll in whatever program is active.

Has anyone figured out what might be causing this?

problem resolved in my case
thedino said:
This is exactly what I mean... It just show the screan but does not work. And it is since I took it out of the box... It might be possible it is bacause the Czech localization program which is not on English TPs...
If you experience this problem, do you have some special localization for keyboard?
Click to expand...
Click to collapse
I had the same problem, but I found the solution ... at least is is working for me now ...
I start to think your way ... since I am also using localization ... InterWrite 9.5
I changed some things (at least those that I remembered that I changed before). Than InterWrite asked for soft reset ... I did it and now it works.
Try to change some settings ... I disallowed support hardware keyboard (I think this was the most important) and some other settings. If it's not working for you and you use the same localization soft, write here and we can go through every tab of InterWrite and do the same settings.

AlPachino, you are genius... it was enough to swith the "Hardware Keyborad" in the Interwrite and now it works... I think we should report this bug to SW developer of that soft...

bugreport for sunnysoft
thedino said:
AlPachino, you are genius... it was enough to swith the "Hardware Keyborad" in the Interwrite and now it works... I think we should report this bug to SW developer of that soft...
Click to expand...
Click to collapse
done already

I'm also having this problem, but I don't know what InterWrite is (pretty sure i'm not using it).
Is there somewhere in the registry to reassign these buttons back to their intended purposes? I assume some people have remapped them to be UP/Down scrolling, so we probably know where the registry settings are.

slyng1 said:
I'm also having this problem, but I don't know what InterWrite is (pretty sure i'm not using it).
Is there somewhere in the registry to reassign these buttons back to their intended purposes? I assume some people have remapped them to be UP/Down scrolling, so we probably know where the registry settings are.
Click to expand...
Click to collapse
Same here... I am having the same issue and not using InterWrite.

snathanb said:
Same here... I am having the same issue and not using InterWrite.
Click to expand...
Click to collapse
yeah, I took the easy way out by flashing a new ROM. I'd still love to hear the solution, but for now that has (obviously) fixed the issue for me.

slyng1 said:
yeah, I took the easy way out by flashing a new ROM. I'd still love to hear the solution, but for now that has (obviously) fixed the issue for me.
Click to expand...
Click to collapse
I did a backup, then hard-reset, and that cured the problem.
I'm running the elite ROM right now, so it's not the ROM, it has to be one of the programs I added. So, I'm going to add them in 1 at a time and see who the guilty party is.
Edit: I put them all back in, and it now works fine. I tried replicating all the registry tweaks I had used and it still works... so I don't know what the answer is to why it was broken in the first place.

Same issue with me .
Used a hebrew localization, however, I hard resetted and re-installed and it seemed to be working fine. Now it is broken again just as you guys describe.
If anyone could find the reason or the hidden registry key, I'd be very grateful.

Happened to me too.
Did any of you have Diamond Tweaks installed? I noticed it on mine after this install. I know it has some tweaks in it for remapping scrolling. I've since hard reset, and installed everything except Diamond Tweaks. The button is still working as expected.

Fring is also a problem
I figured out that when I load Fring on mine the volume keys fail to work. I didn't have the problem on my Diamond so I'm guessing it's something to do with the (stock) ROM on the TP.
ROM: 1.90.405.1 WWE 08/01/08
Radio: 1.02.25.19
Protocol: 52.33.25.17U

Did any of you have Diamond Tweaks installed? I noticed it on mine after this install. I know it has some tweaks in it for remapping scrolling. I've since hard reset, and installed everything except Diamond Tweaks. The button is still working as expected.
Click to expand...
Click to collapse
None. In fact, it is one of the reasons I reset in the first place.
The latest thing I installed was "Startup service" but I don't see what does it have to do with it. I'll try to go to one of my recent backups and check.
Luckily I backup almost daily now (hard reset was a *****).

Just letting you guys know. So far found 2 programs that cause this behavior for me:
P.D.A.C Hebrew localization (talked to their support and they confirm the problem)
FDC Start Menu - http://www.dotfred.net/FdcStartMenu.htm
Real shame for both because I need hebrew and I liked FDC Start Menu a lot.

S2U2 1.35 will cause this problem, if you uninstall it you will be fine.. I think this should e fxed in the ne ver.

Related

HTC keyboard

rite theres a massive annoyin problem im having at the moment
at first i thought it was hard neways
basiclly what happens is when i type on the keypad i get this wierd problem where the spacebar dont work i mean i press it but it dont work AT TIMES
and i just get text like this il give an example
"heysh ows it going"
its really annoyin
i was looking at the keyboard fixes however theyre to remap buttons to symbols so i dont know
has anyone else had this problem
im running on HTC 6.1 3.03.405.0
Radio 1.64.06.04
shaji007 said:
rite theres a massive annoyin problem im having at the moment
at first i thought it was hard neways
basiclly what happens is when i type on the keypad i get this wierd problem where the spacebar dont work i mean i press it but it dont work AT TIMES
and i just get text like this il give an example
"heysh ows it going"
its really annoyin
i was looking at the keyboard fixes however theyre to remap buttons to symbols so i dont know
has anyone else had this problem
im running on HTC 6.1 3.03.405.0
Radio 1.64.06.04
Click to expand...
Click to collapse
No Offense to you just want to drive this home to anyone reading....
DISABLE XT9!!
I was having the same problem. I was using one of dutty's roms. I switched over to sleuth v3.0. and its gone.. I figure the anti-aliasing on the fonts had something to do with it. i could be wrong. But its gone now
i'm having this problem with dutty's 4-29 rom...i don't have TX9 enabled and i agree it IS annoying!
I just posted something over here http://forum.xda-developers.com/showthread.php?t=391708&page=16 on what i believe you may be speaking about. I believe its a bug with the att 6.1 roms. Its seems many people havent really noticed it yet, and it gets really annoying when trying to text. I purposely didnt cook with this rom to see if the bug was fixed, but it seems apparent that its not!
JimmyMcGee said:
No Offense to you just want to drive this home to anyone reading....
DISABLE XT9!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=63520&d=1198925369
frustrating
Dayum, i just don't get it!!! so far with every 6.1(including the latest at the time of this post [06152008] ATT 19214 build with 1.65.20.29 radio) rom ive tested, the same glitch surfaces. I don't wanna hear anything about disabling XT9 because it is not the issue. The best way to see this error is to do this test: 1)open the messaging app as if your going to text someone 2)place the cursor in the texting field, change the sip to "letter Recongnizer" 3) now with your stylus, sweep going across only in the lower case "abc" field, going about 2 or 3 sweep a sec(as if your spacing in a text msg). while doing this you will noticed occasionally a line that will strike down similar to lightning! I believe this same thing happens when texting on the soft kb but you just cant see it! This error is a PITA, because it causes alot of misspells when using any other 3rd party sip or the soft kb! Can some of you guru's out there please help with a solution? Thanks!
i have the same space bar issue but i thought that it was hardware not software. also it seems as if my delete key is supper sensitive if i touch a button near the delete key it deletes damn near the whole word. it's really annoying. I have NEVER dropped my phone or anything and i have the t9 disabled.
hnic8705 said:
i have the same space bar issue but i thought that it was hardware not software. also it seems as if my delete key is supper sensitive if i touch a button near the delete key it deletes damn near the whole word. it's really annoying. I have NEVER dropped my phone or anything and i have the t9 disabled.
Click to expand...
Click to collapse
The issue you described is not really what im speaking about. Basically it can go unnoticed while texting someone, especially if you text quickly, you would think that your accidentally pressing the wrong letters when actually its a glitch thats registering the wrong presses. For example; if im texting with the soft kb or the htc keyboard app, occasionally when i press "a" it'll register the press as if im pressing the left soft key or another letter directly below it, and this happens randomly with different letters and different presses! I've only ran into this error with 6.1 roms only, so far i have never experienced this with any of the 6.0 roms. Also, I'm only speaking about the soft kb or any 3rd party sips, The hardware keyboard works fine!
I really thought it was me typing wrong, although that's quite odd as I was txting without a problem before....
and I have two problems from the keyboard using dutty's rom:
"space key is somewhat lagging"
and,
the 'backspace' key sometimes got stuck in acting as a 'delete' key which is quite annoying. I have checked and it doesn't matter the 'Fn' is enabled or disabled, it just work as 'delete' until I soft reset it.
endiz said:
http://forum.xda-developers.com/attachment.php?attachmentid=63520&d=1198925369
Click to expand...
Click to collapse
http://forum.xda-developers.com/atta...0&d=1198925369
WORKED LIKE A CHAMP!!! thanks!

Hardware keyboard slide annoyance! :mad:

Hi guys,
I went from loving my Touch Pro to almost throwing it at a wall!
This keyboard slide-out issue is driving me nuts, whenever I want to type something using the hardware keyboard, I slide it out and the damn landscape TF3D menu gets displayed ON TOP of whatever page I'm on.
I've tried the disable landscape registry trick (HKCU\SOFTWARE\HTC\Manila\landscape=false then soft reset) which works... but after a while (a few minutes or after some program or some random thing) it stops working and I have to either reset the phone or turn the reg key back to "true".
Is there any way at all to prevent the keyboard slide showing the landscape menu or at least prevent the menu from being on top of the current app?
For example I go to reply an SMS (I even tried waiting on the cursor to blink a few times, 2 - 3 secs) then slide out the keyboard to type and the stupid 8 icon menu goes on top of my message entry page, I have to choose 'messaging' app from the list of running apps to get back to that page, it really defeats the purpose of having a hardware keyboard!
Thanks guys for reading the rant.
andyle2k said:
Hi guys,
I went from loving my Touch Pro to almost throwing it at a wall!
This keyboard slide-out issue is driving me nuts, whenever I want to type something using the hardware keyboard, I slide it out and the damn landscape TF3D menu gets displayed ON TOP of whatever page I'm on.
I've tried the disable landscape registry trick (HKCU\SOFTWARE\HTC\Manila\landscape=false then soft reset) which works... but after a while (a few minutes or after some program or some random thing) it stops working and I have to either reset the phone or turn the reg key back to "true".
Is there any way at all to prevent the keyboard slide showing the landscape menu or at least prevent the menu from being on top of the current app?
For example I go to reply an SMS (I even tried waiting on the cursor to blink a few times, 2 - 3 secs) then slide out the keyboard to type and the stupid 8 icon menu goes on top of my message entry page, I have to choose 'messaging' app from the list of running apps to get back to that page, it really defeats the purpose of having a hardware keyboard!
Thanks guys for reading the rant.
Click to expand...
Click to collapse
What ROM are you currently using?
I had that issue too, I got rid of the theme I was using and stuck to the original HTC theme and I no longer have that problem!
I'm using Da_G's Clean ROM with his standard Manila install afterwards.
I've recently uninstalled the EzInput/T9 package from HTC and it seems to be behaving itself for now (it's been 2 hours with minimal use), like I said before it happens randomly. I don't know if it was because of the EzInput or something else because this seems to go away after every soft reset then comes back unexpectedly.
Thanks.
andyle2k said:
I'm using Da_G's Clean ROM with his standard Manila install afterwards.
I've recently uninstalled the EzInput/T9 package from HTC and it seems to be behaving itself for now (it's been 2 hours with minimal use), like I said before it happens randomly. I don't know if it was because of the EzInput or something else because this seems to go away after every soft reset then comes back unexpectedly.
Thanks.
Click to expand...
Click to collapse
I had the issue using the RRE ROMs and ended up removing HTC Volume Control and it solved the problem completely.
Hrm I see to be having the issue again. How do I remove the HTC Volume Control?
I don't have any of this because I dumped the TF3D. Much happier and trouble/issue free without it. Euro device using stock rom.
OK I can confirm that it is the HTC Volume Controls that is causing this!
So from my previous post I tried to uninstall HTC EZinput which seemed to have fixed it but like I originally said the problem seems to happen out of nowhere after some time using the device.
So after reading the post above about HTC Volume Control, I pressed the vol down button, then this problem started happening again. I did a soft reset and no more problem after a while I pressed the vol button again and it happened again!
andyle2k said:
OK I can confirm that it is the HTC Volume Controls that is causing this!
So from my previous post I tried to uninstall HTC EZinput which seemed to have fixed it but like I originally said the problem seems to happen out of nowhere after some time using the device.
So after reading the post above about HTC Volume Control, I pressed the vol down button, then this problem started happening again. I did a soft reset and no more problem after a while I pressed the vol button again and it happened again!
Click to expand...
Click to collapse
Check out the ROM in this thread:http://forum.xda-developers.com/showthread.php?t=467592
This is the ROM I use and the cook has already removed HTC VOLUME CONTROL from the ROM.
Fix
instal the 6.5 volume control from JMZ - problem solved.
link
sorry, here is the link:
http://www.everythingdiamond.info/
colbyjames said:
sorry, here is the link:
http://www.everythingdiamond.info/
Click to expand...
Click to collapse
but he link that you gave us is for HTC Diamond... not for HTC Raphael...
will the application works on HTC Raphael??
Problem solved!
I had this problem for ages (as long as I have my Raphael, I think), and I couldn't track it down on the internet. Some time ago I found a post on XDA describing the problem but I can't find it again. Finding this post made me think.
I installed the aforementioned "volume control from JMZ" (I had extremely hard time finding it) and I didn't like it because it did something strange with my system font but it solved the problem. After few unsuccessful tries to fix the font (btw does anyone know how to fix this?) I decided to uninstall it. And the problem didn't return.
So what was the problem? Well… when I bought the phone I wanted (as many of you did) to change those ugly taskbar icons including volume icons contained within HTCVolumeControl.dll. And I did it by finding the dll file with the prettiest icons here on XDA (and maybe I changed some of them using the described procedure, I really can't remember now). However, that dll is the main culprit for the bug described in this post. Was it already broken when I found it, or I somehow broke it it's irrelevant now.
So the solution is: you don't have to install anything. Just delete HTCVolumeControl.dll from Windows folder, i.e. rename it using for example Resco File Explorer and then soft reset the device so that original file from ROM can be restored. Yes, the ugly icons will return but at least now you'll now where to look if this bug reappears. After that go and some find pretty volume icons, and again follow the procedure how to change them.
I have no idea how the file got corrupted in the first place (maybe there is some corrupted dll roaming the xda forum ) but after this episode I make changes only directly on the original dll (the one from ROM) and every time it was successful. I changed many icons until I found my favorites.
Cheers!

Volume control button problem

Hi,
I have a problem with the hard volume buttons.
When pressed they function as up and down buttons but with a few seconds delay. I want them to control the volume. I have probable installed some program that messed up the phone but can't get it to work the way I want even after many uninstalls...
Finally I found AEBPlus trial and I do not know what I did but the buttons now works. Afer uninstalling AEBPlus the volume buttons do not work anymore.
Does anyone know of a solution to the problem which does not include AEBPlus? Registry?
Edit:
I have a HTC Diamond with Windows Mobile 6.1
ROM: 2.03.413.2.SVE (latest original)
Radio: 1.09.25.23
It seems like it is a custimized taskbar problem...
what's installed on your device?
nir36 said:
what's installed on your device?
Click to expand...
Click to collapse
A lot...
Problem seemes solved.
I read about another guy who had the exact same problem and after blaming g-alarm for a while he came to the conclusion that it was an old htcvolumecontrol.dll that what the root cause. I did an update on my taskbar and now it works.

Help! ( Touch Pro 2, home screen reversion )

Hey all,
First, I'd like to say that so far the Touch Pro 2 is freaking awesome, but It's been doing something since I got it that is driving me up the wall;
So, say I'm in gsplayer or Opera, and for whatever reason, the screen turns off ( I hit the power button, it times out for power conservation, whatever... ). Whenever I turn the screen back on, the Clock in Touch Flow 3D shows up. GAH >_<
Is there any way to just open the phone back up to what I was looking at when the screen turned off? Help me XDA-Developers, you're my only hope!
-AceSmythe
update:
I went to the home configuration and disabled TouchFlo 3D , and it doesn't revert to the home screen when I reset
Does anyone know how to tell TouchFlo 3D to not re-assert itself every time I turn the screen on? I didn't see anything obvious in the registery
Thanks,
AceSmythe
I have a Touch Diamond 2 and i don't have this problem..
When i just hit the power button to turn the screen off, and 1 minute later when i turn it back on, everything is still the same as i left it. All the programs are still opened.
Maybe you hit the right 'hang up' key?? Because when you press it you go back to the homescreen
I'm pretty sure I know the difference between the power button at the top of the device and the hang up button near the bottom, thanks.
Anyone around who actually has a Touch Pro 2?
I have this issue with my Blackstone, using Duttys 3.9.
I have seen this issue before and as far as i have found out there is no soution to this. The only thing that could help is turning off the Msofts LOCK app. Unfortunately mine is on due to exchange security policy.
If your lock is not on, then im afraid i dont know
timmymarsh said:
... The only thing that could help is turning off the Msofts LOCK app. Unfortunately mine is on due to exchange security policy...
Click to expand...
Click to collapse
What does that app do and how would I turn it off?
I also went into the registry and disabled the Home tab for TouchFlo 3D, but the issue persists
( registry entry HKLM\Software\HTC\Manila\Configuration\0\Enable , set to 0 )
To any who are curious, this appears to be a viable method of removing Home, Programs, and Settings from the TouchFlo 3D tabs. On my device, 0 is Home, 2 is Programs, and 12 is settings
On another note that's completely unrelated, don't install the SRSwow control panel if you don't have drivers/hardware for it. It completely crippled the speakers and mic on the phone, and Voice Command ( voicecommand.exe ) freaked out whenever I tried to start it. Luckily, removing the software through Start -> Settings -> System -> Remove Programs and doing a full reset fixed everything
( above 2 paragraphs included for people Googling either issue )
Anyway, back to the home screen thing... any other thoughts?
-AceSmythe
acesmythe said:
What does that app do and how would I turn it off?
Click to expand...
Click to collapse
If you are using the lock app (which locks the screen) you can turn it off/on by going to (on my HD) settings/all settings/personal/lock and disable it if enabled.
It may not help you, but is a known issue regarding this particular problem.
Greetz.
Have you unchecked the today timeout?
Go to Settings/Personal/Today/Items and make sure it's unchecked.
dwizzy130
dwizzy130 said:
Have you unchecked the today timeout?
Go to Settings/Personal/Today/Items and make sure it's unchecked.
dwizzy130
Click to expand...
Click to collapse
Yes and makes no difference, but cheers for the idea.
Yeah, that was the first thing I tried aswell
** Warning **
Do not install the TouchFlo Detacher, it WILL break TouchFlo on your system
See http://freewareppc.com/utilities/touchflodetacher.shtml , then avoid it like the plauge
-AceSmythe
Sorry for the lateness of this post, after a full wipe and reinstall of everything ( after the TouchFlo 3D disaster mentioned above ) the home screen does not assert itself anymore. Per suggestion, I did not enable the lock. I'd test turning on the lock and off again, but I don't want to push my luck
Thanks one and all
-AceSmythe
Mod Edit : No probelms, but no need for the final comment, so I have removed it
Now what would really solve this if you could check the registery to find the key responsible. I will have a look at mine in depth but i fear i will not find it.
Cheers.
acesmythe said:
...
Thanks one and all
-AceSmythe
Mod Edit : No probelms, but no need for the final comment, so I have removed it
Click to expand...
Click to collapse
I thought the "final comment" was worth a mention, it /was/ kind of insulting
timmymarsh said:
Now what would really solve this if you could check the registery to find the key responsible. I will have a look at mine in depth but i fear i will not find it.
Cheers.
Click to expand...
Click to collapse
I've been all up and down that thing and either I'm just ignorant of some term that I should be looking for or there's just no entry for it
Maybe someone could write an app to fix it or a replacement locking app
-AceSmythe

Taskbar customization and volume manager

I finally customized my mega the way I wanted it to be when I initially bought it. I'm also running a 6.5.5 rom. Unfortunately I still have some issues with it and I was wondering if someone knew anything about them. First of them is if it would be possible to remove the start soft key in the bottom left corner of the screen. That would be nice since the mega already has a hardware start key and the one on the screen becomes redundant. It would be nice if we would just have two soft keys in the bottom corners
Also, I looked for a solution for the ugly volume manager in these last builds but couldn't really find one. I tried other volume managers like setvolume but that one is buggy even with answering phone calls. I find that unacceptable because most of all, it's a phone. So maybe if we could restore the default one or use another one without so many bugs that would be great. I saw somewhere that a solution was already available but for vga phones. Maybe that could be ported to qvga
I am with you on this. Would love to see these fixes.
I need theses fixes too!!! WM 6.5.5 has bad interface...
Why does the volume control must be so fat and ugly??
The most important thing is volume control in the youtube app sucks!
I wish someone can fix the volume control to use back the original HTC one.
Erm ok, the problem is even when the default HTC Volume control is implemented in the ROM, for some reason WM 6.5.5 overwrites that. I tried a few times. I think that sucks cos I'm a student , and my phone needs to be on silent. But the new volume control can be activated on the lockscreen so I'm afraid it would turn silent off. Any suggestions for this?
tlkh said:
Erm ok, the problem is even when the default HTC Volume control is implemented in the ROM, for some reason WM 6.5.5 overwrites that. I tried a few times. I think that sucks cos I'm a student , and my phone needs to be on silent. But the new volume control can be activated on the lockscreen so I'm afraid it would turn silent off. Any suggestions for this?
Click to expand...
Click to collapse
There's a nice app called SetVolume that does the trick quite nicely. Also, there's a cab that can remove the start button. I lost the cab but there's a registry tweak that does the job. You can search for it.

Categories

Resources