Hi everyone ,I want a stock recovery to restore from cwm recovery,,as clockworkmod recovery does not allow to flash update.zip ....
I really want stock recovery for this pllz reply, if anyone could arrange stock recovery for p5113 model ( Galaxy Tab 2 10.1 )(U.S. Variant)
androidmarker said:
Hi everyone ,I want a stock recovery to restore from cwm recovery,,as clockworkmod recovery does not allow to flash update.zip ....
I really want stock recovery for this pllz reply, if anyone could arrange stock recovery for p5113 model ( Galaxy Tab 2 10.1 )(U.S. Variant)
Click to expand...
Click to collapse
JUst flash the STOCK ROM from ODIN
androidmarker said:
Hi everyone ,I want a stock recovery to restore from cwm recovery,,as clockworkmod recovery does not allow to flash update.zip ....
I really want stock recovery for this pllz reply, if anyone could arrange stock recovery for p5113 model ( Galaxy Tab 2 10.1 )(U.S. Variant)
Click to expand...
Click to collapse
I would advise against restoring stock recovery via CWM What is it you need the stock one for? You can get the stock one back but if you plan to keep root or get root CWM atm is only way to get it so in the end CWM will need to be put back on if you need root.... But what are you trying to do?
Read dev thread, the answer is there if you want it.
Sent from my GT-P5113 using xda premium
darkensx said:
I would advise against restoring stock recovery via CWM What is it you need the stock one for? You can get the stock one back but if you plan to keep root or get root CWM atm is only way to get it so in the end CWM will need to be put back on if you need root.... But what are you trying to do?
Click to expand...
Click to collapse
I wanted to flash my 4.1.1 official stock update zip but CWM just does not install it...
It just gives (Status 7) ERROR !
So, i wanted to revert back to stock recovery by, flashing (stock recovery) Recovery.img or . tar
Please Help me with this...
Any FIX about (status 7) ERROR?
DigitalMD said:
JUst flash the STOCK ROM from ODIN
Click to expand...
Click to collapse
I want Stock Recovery.img or Flashable zip.....
Why don't you just flash 4.1.1 w/Odin? You seem to be going out of your way to make it harder than it should be. Don't know what else to tell you.
Sent from my SAMSUNG-SGH-T769 using xda premium
androidmarker said:
Hi everyone ,I want a stock recovery to restore from cwm recovery,,as clockworkmod recovery does not allow to flash update.zip ....
I really want stock recovery for this pllz reply, if anyone could arrange stock recovery for p5113 model ( Galaxy Tab 2 10.1 )(U.S. Variant)
Click to expand...
Click to collapse
My work around for this is the leave the stock recovery, a little pain each time I need to use CWM, but with Triangle away and stock I get OTA updates.
You don,t understand me !
I mean cwm do not allow me to flash update.zip so i want a stock recovery file...
You dont understand them. Flash a stock rom using odin. Or better yet, flash the stock rom you wanted in the first place using odin. If you have cwm right now its likely you are rooted correct? If you are, have you deleted any system apps? If you have the update wouldn't go through anyway. If you are on a custom rom it won't go through anyway. Just use odin and be done with it.
sent from MY BAD A$$ ET4G
What is the stock version OS for this? I seem to find many answers. Some places list it as 4.0.3, and others list it as 4.0.x or 4.0.?...
Last night I made the horrible choice to update the OS from the stock. Something I had been putting off for months. After I updated it, the system said I had 4.0.3, and there were noticeable changes (the sound that plays when booting up, the infamous 'water drop' sound, the horrible white-washing of the keyboard and sound controls, etc.) Before I decide to try this ROM/Root-ing stuff, I decided to keep updating and see if there were new changes that updated the things I didn't like. No luck. All the things I hate are still present... Current version as reported by the tablet "About device" in settings says 4.1.1 with Kernel 3.0.31-523998 and Build number JRO03C.P5113UECLK7.
I am interested in trying the ROM/Root-ing. But I can't find a solid reference to what version of ICS this came with (unit was purchased in July 2012). The box and every other printed document I could find simply says "Adroid 4.0" or "ICS 4.0", and does not tell me if it is 4.0.3 or 4.0.x or whatever.
I want my normal bootup sound to play. I want these white-washed keyboards and other controls out of here! And for the love of anything, this water drop sound needs to take a dirt nap.
I suppose I would also be happy with anyone who can tell me how to get back the normal dark keyboard and other visuals and/or change the water drop sound back to the simple 'click' that was there before. Although I have already searched for this option and I have not come across these solutions (outside of ROMing and changing the .ogg files around).
ANY help or directions will be greatly appreciated!
Thank you in advance,
capnflummox
The samsung keyboard is the same in all stock firmware for p51xx.
Stock firmware can be found here: http://forum.xda-developers.com/showthread.php?t=1704668
If you have root and su, bring up a shell and execute
# sh /system/etc/install-recovery.sh
That should restore the stock recovery from the backup partition (the active recovery is in /dev/block/mmcblk0p6 and the backup is installed on p5).
(That normally gets invoked by init.rc at each boot, but CWM marks it as no-execute to keep it from running.)
Almost what I need I think
k1mu said:
If you have root and su, bring up a shell and execute
# sh /system/etc/install-recovery.sh
That should restore the stock recovery from the backup partition (the active recovery is in /dev/block/mmcblk0p6 and the backup is installed on p5).
(That normally gets invoked by init.rc at each boot, but CWM marks it as no-execute to keep it from running.)
Click to expand...
Click to collapse
So this is if you have root, etc. I have a GT-P5113 from a friend. It tried to update and got hung like so many others. My question is, at the fail screen, what do I do to be able to get into Recovery or download mode so I can get this tablet back to life? I have tried everything I can find on the subject...not a lot out there for my situation. Please help!
Thanks
k1mu said:
If you have root and su, bring up a shell and execute
# sh /system/etc/install-recovery.sh
That should restore the stock recovery from the backup partition (the active recovery is in /dev/block/mmcblk0p6 and the backup is installed on p5).
(That normally gets invoked by init.rc at each boot, but CWM marks it as no-execute to keep it from running.)
Click to expand...
Click to collapse
thanks very much that method works and i learned something in the process:good::good::good::good::good:
Related
I decided to return to stock today so i could check out the newest ota which was not implemented in my fav rom yet. I soon realized its a pain in the ass to get there. Flash rom, update, update, etc, etc. And even worse is tracking down all the threads required for it.
Though I've narrowed it down to three or four, I thought i'd make a thread to put it all in one spot.
First off thanks to the members/devs that make these updates and roms for us. I dev on the HTC eVO 4g and know how time consuming and tedious it can be.
I am renaming and reuploading all the files required to ensure links stay current and are easy to follow. I will however be linking to all original threads where i got the files as well as giving props to the members who provided them.
I have a US version TF101 and will only be testing on that device. I dont know what works on tf101G, WW, TW models etc
I will update this thread as new rooted ota's come out.
ALL YOU NEED TO INSTALL IS A ALREADY ROOTED ASUS TRANSFORMER WITH A CUSTOM RECOVERY
THIS WILL NOT ROOT YOUR DEVICE, UN-ROOT YOUR DEVICE OR CHANGE YOUR CURRENT RECOVERY.
DONT FORGET TO BACK UP ALL YOURS APPS/DATA
FOR US VERSIONS ONLY
- STEP 1 - WIPE (DOWNLOAD) (This wipe zip was originally provided HERE by mike1986.
This script will erase and format your system and cache partition using EXT4 file-system ---Your external SD card and internal virtual SD card (/data/media) will remain untouched
- STEP 2 - FLASH STOCK ROOTED 9.2.1.11 FULL ROM AND REBOOT/SETUP (DOWNLOAD) originally provided here by MrNago
- STEP 3 - FLASH ROOTED OTA 9.2.1.17 AND REBOOT (DOWNLOAD) originally provided HERE by daoist
-STEP 4 - FLASH ROOTED OTA 9.2.1.21 AND REBOOT (DOWNLOAD) originally provided HERE by gee one
FOR WW VERSIONS ONLY
- STEP 1 - WIPE (DOWNLOAD) (This wipe zip was originally provided HERE by mike1986.
This script will erase and format your system and cache partition using EXT4 file-system ---Your external SD card and internal virtual SD card (/data/media) will remain untouched
- STEP 2 - FLASH STOCK ROOTED 9.2.1.11 FULL ROM AND REBOOT/SETUP (DOWNLOAD) originally provided here by MrNago
CANT FIND ROOTED VERSIONS OF THE NEXT FEW UPDATES THAT DONT REQUIRE ROOT KEEPER, SO IM STOPPING HERE. THIS WILL GET YOU STARTED THOUGH. i JUST DONT WANT TO BE RESPONSIBLE FOR NEWBS THAT CANT READ LOSING ROOT.
FAQ
-Will this root my transformer = no
-Will I lose root if i flash this = NO
-Can i flash this on top of a custom rom = NO
-Will this replace the custom recovery with the stock recovery? = NO, this will not touch your current recovery
-OMG, I lost root after this = NO you didnt or you did something wrong.
Can you explain why step 2 and 3 are needed?
You couldn't go from 1 to 4 if you want 9.2.1.21?
locutus7o9 said:
Can you explain why step 2 and 3 are needed?
You couldn't go from 1 to 4 if you want 9.2.1.21?
Click to expand...
Click to collapse
its my understanding that you have to have the last prior ota installed to be able to install the next. The last update may not include everything from the others.
Will this replace the custom recovery with the stock recovery?
xbs said:
Will this replace the custom recovery with the stock recovery?
Click to expand...
Click to collapse
I knew i'd forget one of the typicals in the FAQ..
Answer is no, this will not change/touch your current recovery
I wanted to return to stock Rom too, but I have seen your topic too late....
I first saved my root with rootsavekeeper
I have wiped cache and dalvik, and then install the rom
Now, I have a bootloop with the Asus logo, and if I try boot in recovery, I have the red robot
If u have a solution, I take it
Sorry for my english
jouix said:
I wanted to return to stock Rom too, but I have seen your topic too late....
I first saved my root with rootsavekeeper
I have wiped cache and dalvik, and then install the rom
Now, I have a bootloop with the Asus logo, and if I try boot in recovery, I have the red robot
If u have a solution, I take it
Sorry for my english
Click to expand...
Click to collapse
What ROM did you flash? If you flashed the official ROM from Asus you unrooted the TF.
Looks like you have stock recovery now.
Yes I have
My biggest problem is to get out on this sh*t Now
jouix said:
Yes I have
My biggest problem is to get out on this sh*t Now
Click to expand...
Click to collapse
Try this.
Hold Vol down plus power button
When you get the option of COld boot Linux or wipe data,
choose wipe data.
jouix said:
Yes I have
My biggest problem is to get out on this sh*t Now
Click to expand...
Click to collapse
What model do you have? B50, B60, B70?
If you have a B50 or B60, try this
Once you get back to stock honeycomb, you'll have to root it again.
@baseballfanz : Guy, you have saved my tablet .. I had almost throwed it in the garbage
@ldc2335 : I have bought it in France, and no idea about the version, sorry .. (I don't have the dock)
Well, now, I willl see if it is stable or not :
- if it is, I need to find the way to root it (but I have read it's not possible with the last Rom, right ?)
- if not ... I will try to return to Honeycomb and sell this piece of sh*t, and I will buy the Galaxy S3 or will wait for the Note 2
Thx again !!!!
I use NVflash way and from modded(rooted/CWM/Overclock) 9.2.1.17 directly flash back to stock clean 9.2.1.17 and it's very quick... and root it agan via Vipermod and flash 9.2.1.21 update zip.. Takes about lest than 30mins..
Thats one way to do it. I just dont wanna re-root etc.
Flash, reboot, flash, reboot, flash, reboot..done Definitly 30 mins or less.
jouix said:
@baseballfanz : Guy, you have saved my tablet .. I had almost throwed it in the garbage
@ldc2335 : I have bought it in France, and no idea about the version, sorry .. (I don't have the dock)
Well, now, I willl see if it is stable or not :
- if it is, I need to find the way to root it (but I have read it's not possible with the last Rom, right ?)
- if not ... I will try to return to Honeycomb and sell this piece of sh*t, and I will buy the Galaxy S3 or will wait for the Note 2
Thx again !!!!
Click to expand...
Click to collapse
If you can return to honeycomb, then just reroot and then flash any rom you want. Whats the issue?
Simple, clear, straightforward directions - very nice. The file naming is clever also, no "now which file do I flash next?..."
Does anyone have a clue where i can find cwm flashable WW Stock Roms with Original Recovery and no root?
Want to revert back to full basic!
(Tried to flash Stock Rom from Asus Website via CWM, didn't work...)
Try This
JohnMcLane said:
Does anyone have a clue where i can find cwm flashable WW Stock Roms with Original Recovery and no root?
Want to revert back to full basic!
(Tried to flash Stock Rom from Asus Website via CWM, didn't work...)
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1558170
i just used the search bar above, im sure theres more than this one.
You will also need a NVflashable tf101 with this....
I hve succesfully flashed the .11 version, but when I try to update to the next version, it restarts, and starts loading the installation as it is supposed to, ut then it says "installation aported"
I am using Rootkeeper and CWM, and have temp. unrooted, I am using a B70 WW.
Anyone have a solution?
Sumsar94 said:
I hve succesfully flashed the .11 version, but when I try to update to the next version, it restarts, and starts loading the installation as it is supposed to, ut then it says "installation aported"
I am using Rootkeeper and CWM, and have temp. unrooted, I am using a B70 WW.
Anyone have a solution?
Click to expand...
Click to collapse
Same here, its an assert issue, I remember dealing with it when flashing my epic touch and I believe that had to do with the version of CWM that it was being flashed from
can anyone confirm?
EDIT: B40 using roach v5.5.0.4 r2 CWM
I am on stock(P3113 rooted+cwm)...I am getting an OTA for 4.0.4 but for that i'll need to go back to stock recovery...Should i :
1) Flash stock rom n then take the OTA
2) Flash 4.0.4 through odin [ http://samsung-updates.com/device/?id=GT-P3113 ]
3) Flash stock recovery n then take the ODA.
I would like to go with option 3 cuz it will require the min. amount of downloading....But for that i need stock recovery...So what should i do n is there any other way??
On my 5113 the only thing that worked for me was to flash with Kies and then reroot. It was well worth it though.
There doesn't seem to be an easy way to get just the recovery and I think (not sure) that only Odin can unlock that partition anyway. There are some stock images in Odin format and I have been meaning to pick through them to see if I can find the stock recovery image, but since no one has posted such, I am guessing you can't.
wd5gnr said:
On my 5113 the only thing that worked for me was to flash with Kies and then reroot. It was well worth it though.
There doesn't seem to be an easy way to get just the recovery and I think (not sure) that only Odin can unlock that partition anyway. There are some stock images in Odin format and I have been meaning to pick through them to see if I can find the stock recovery image, but since no one has posted such, I am guessing you can't.
Click to expand...
Click to collapse
But the problem is that i can't update vie kies...It keeps on disconnecting, so OTA is my only option n for that i need to get rid of CWM.
I am curious too, I rooted using this method, and have CWM installed.
http://forum.xda-developers.com/showpost.php?p=25480291&postcount=137
I guess I can just flash the stock image and loose root, upgrade, then reroot. Hopefully, someone will drop a stock, rooted and deodexed 4..0.4 rom for the P3113.
Also, I have not used Kies before, so I guess I don't even know how to flash the stock image for this tablet. Can anyone help with that?
fillyo said:
I am curious too, I rooted using this method, and have CWM installed.
http://forum.xda-developers.com/showpost.php?p=25480291&postcount=137
I guess I can just flash the stock image and loose root, upgrade, then reroot. Hopefully, someone will drop a stock, rooted and deodexed 4..0.4 rom for the P3113.
Also, I have not used Kies before, so I guess I don't even know how to flash the stock image for this tablet. Can anyone help with that?
Click to expand...
Click to collapse
To flash stock you'll have to use the stock rom n flash using odin,,, But i was hoping that there is way around it...
I've updated today my rooted P3113 to 4.0.4
This is the only way to upgrade rooted P3113 (with CWM), because the samsung official upgrade scenario doesnt works on CWM
1. Backup with Titanium
2. Wipe/factory reset with CWM
3. Download and unzip stock 4.0.4 firmware from here, then flash it with odin (PDA button)
4. Configure your device (now it's clean stock apps and stock recovery)
5. Restore your apps with Titanium
6. Install CWM and root - If you wish so (just as you installed on 4.0.3)
barmalei7 said:
I've updated today my rooted P3113 to 4.0.4
This is the only way to upgrade rooted P3113 (with CWM), because the samsung official upgrade scenario doesnt works on CWM
Click to expand...
Click to collapse
I would imagine this is just like the 5113. If you use Keis instead of the OTA update it works. Apparently Keis uses the USB instead of the recovery. However, a lot of people are having trouble getting Keis to stay connected. But I used it with no problems. Just reflashed CWM and rerooted as you say, but did not have to reflash to stock.
Just updated manually from 4.0.3 + Rooted + CWM 5.5.0.4 (GT3113)
Sorry too young to post links
Went very simple (10 minutes)
Returned to Stock Recovery: h://theunlockr.com/2012/06/02/get-samsung-galaxy-tab-2-7-gtp3113-back-stock
REBOOTED
Applied Update (not 4.0.4, not sure what it was)
Downloaded 4.0.4 from Samsung directly: h://samsung-updates.com/device/?id=GT-P3113
Unzipped to Desktop
Updated to 4.0.4 using ODIN (PDA)
REBOOTED
System applied update on startup
Asked me to select language, date, Goodle backup, etc
It loaded all existing Apps, Wi-Fi, etc automatically no TiRestore needed
Up and running, seems faster- smoother, new keyboard (old keyboard was good, this one is as good better for big fingers?)
:laugh:
Back to CWM & Root
h://forum.xda-developers.com/showthread.php?t=1722304
I downloaded the file from the Samsung site, launched Odin and updated. It kept all my apps and settings since I did not wipe. Flashed recovery, then rerooted, did not take long. If it gets yucky, I will do a factory reset.
Very helpful!
Very helpful guide.
On a semi-related note, I really like 4.0.4 it's certainly an improvement over the last and seems to have cured the stupid interface lag.
Ok flashed mine using mobile odin...no need to wipe data..
JacRyan said:
Just updated manually from 4.0.3 + Rooted + CWM 5.5.0.4 (GT3113)
Sorry too young to post links
Went very simple (10 minutes)
Returned to Stock Recovery: h://theunlockr.com/2012/06/02/get-samsung-galaxy-tab-2-7-gtp3113-back-stock
REBOOTED
Applied Update (not 4.0.4, not sure what it was)
Downloaded 4.0.4 from Samsung directly: h://samsung-updates.com/device/?id=GT-P3113
Unzipped to Desktop
Updated to 4.0.4 using ODIN (PDA)
REBOOTED
System applied update on startup
Asked me to select language, date, Goodle backup, etc
It loaded all existing Apps, Wi-Fi, etc automatically no TiRestore needed
Up and running, seems faster- smoother, new keyboard (old keyboard was good, this one is as good better for big fingers?)
:laugh:
Back to CWM & Root
h://forum.xda-developers.com/showthread.php?t=1722304
Click to expand...
Click to collapse
Your steps are so easy. I wish I could follow you on this, but I can't figure out how to revert back to stock recovery only. The theunlockr.com link shows how to completely revert the entire firmware. How do you revert recovery ONLY?
Hasn't someone made a .zip file that can be flashed with CWM? Why is it different than flashing a 3rd party rom?
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Speedy8311 said:
I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Click to expand...
Click to collapse
if you are able to boot into recovery then please wipe cache partition and do a factory reset and then try to revert to stock rom
Speedy8311 said:
But I'm having a problem....I'm using rom manager and rom toolbox
Click to expand...
Click to collapse
For starters, stay away from ROM Manager! It's known to cause different sorts of problems on different devices while installing CWM and ROMs. I have only good things to say about ROM Toolbox in terms of tweaks and utilities, but never used it for ROM installation, and would suggest not to. Just download the ROM you want from its original source, put it on internal or external storage, and flash using your recovery (my personal all-time favourite is PhilZ Touch CWM, not sure what you are using). Do the proper wipes before flashing (full wipe is always recommended, especially between stock and CM/AOSP ROMs. Make sure you also flash other possibly applicable components (depends on the ROM and your preferences) -- gapps, kernel, etc. See if it works that way. I just don't see any reason to use 3rd-party apps for "ROM management" -- the simpler the process, the better.
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Speedy8311 said:
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Power+Volume up
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Speedy8311 said:
i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Speedy8311 said:
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Click to expand...
Click to collapse
You are in recovery... To get to download mode on P31xx for using Odin you need to press and hold Volume DOWN + Power.
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
I think you need to do some research.
http://forum.xda-developers.com/showthread.php?t=1900055
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
Man, that sounds scary! You really need to do some reading on the basics, before you screw something up.
You can flash ZIP files from recovery, including ROMs, kernels, recoveries, and apps. However, you need Odin, a PC connection, and a download mode on your tab in order to flash things like official ROM packages (typically in tar.md5 format).
If you want to flash the ROM in zip format, you can do that in recovery. In general, if you have problems doing that, your other option is Odin and a stock ROM; then you can start over.
Looking closely at your photo, you have a stock recovery. You can only flash signed zips from it, which means you won't be able to flash custom ROMs or kernels. I would suggest to start with flashing a custom recovery (look up PhilZ Touch CWM, it's the best). This will make things easier for you.
P.S.: Sorry, didn't mean to sound harsh... It seems things got a bit confusing in the process, so questions and answers didn't really line up...
well ....I have been doin a lot of research,maybe too much lol....but the only thing I can get outta all of it is that to flash a kernel or rom or both I need to go into recovery(power and up volume) and do a wipe of the cashe and install.....then it seems to trail off there with a ok now your done go enjoy....
I cant seem to find any kinda description of what happens in between the wiping of the cashe/devlick and the install...I keep ending up in the recovey section wheather I use rom manager rom toolbox or just me following directions. I will say this though.....I do not see the cwm logo in the recovery....I stiil have the android and he lays there dead then does a quick flash to an error message then I get the menu....but there is no "mount and storage" and "backup and restore" option for me to choose from I put the tab into recovery mode and took a picture....its in the previous post.
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Speedy8311 said:
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Click to expand...
Click to collapse
Yeah, I got that. Sorry for the confusion! I updated my previous post, take a look. Stock recovery seems to be your problem here.
No harm done lol I appreciate all the help.....I'm a bit new at this,but I learn quick. Ok....I may be putting CWM or pfilze wrong way on my tab I loaded it from the play store,along but when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Speedy8311 said:
when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
Click to expand...
Click to collapse
Not sure exactly what and how you did previously, but the fact is that you've got a stock recovery now. You need a custom recovery - it doesn't have to be PhilZ, even though I strongly recommend it. You can install standard CWM, too, no problem with that. To install PhilZ, you either need CWM to be already installed, or you need to use Odin.
For details and install instructions on PhilZ CWM, look here:
http://forum.xda-developers.com/showthread.php?t=2202667
Oh, BTW, as an alternative to Odin, look up the Mobile Odin by Chainfire on Play Store. It allows you to flash Odin packages from your device directly. Very useful tool! Free version will do, but the paid one has more features.
Speedy8311 said:
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Click to expand...
Click to collapse
Yes, there is. Look in the thread I linked above.
Yep.....i got it stuck in forever boot using mobile odin.... Uugggh....I'm gonna return everything to stock and re-root it.....what ever I did the first time rooting and installing cwm I must a missed a step or something. I'll repost my progress when I'm back to stock and rooted properly
MERRY CHRISTMAS EVERYONE!!!!
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 . I also re-rooted it and installed philztouch and everything is installed properly this time. Funny thing though.....after I got the tab working and before I re-rooted it...I tried to do the factory update to 4.2.2 ,since now I'm only on 4.1.1,it said that I had the latest updates available and my apps and phone list didn't auto load like when I first got my tab....hhhmmmm...anyways it works now and all root stuff and twrp is properly :highfive::highfive: only one more question...now that TWRP is working....when I want to download a kernel or rom do I leave it in Zipped form when I put it on the tab and the tab unzips it and flashs it or do I unzip it? .....sorry for all the basic questions but ya cant learn unless you ask questions
Thanks for every ones help with my Tab 2!!!
Speedy8311 said:
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 .
Click to expand...
Click to collapse
Well, congrats, and merry Christmas! A bit confused - are you using PhilZ CWM, or TWRP?
As for zip files, leave them as they are, don't unzip - the recovery will install them. Just a suggestion - whenever possible, especially for large files like complete ROMs, verify the MD5 checksum to make sure your file is not corrupt during download.
just went into recovery and it says Philz touch 6
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Backup
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
roshan77ss said:
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
Click to expand...
Click to collapse
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
I also tried the fast team one, without any success, when the rom is installed and the device is rebooted, this time the screen stay blocked on "samsung galaxy tab3" for years!!!
sorry, i meant the fast dream rom
I just tried to Flash three roms from sammobile.com (one from hong-kong, one from spain and one from germany) through Odin.
Everytime I get I click on AP to load the rom on odin, I get this message:"md5 error! Binary is invalid".
Since I have rooted the tablet using odin to instal CWM, when I boot the tablet in download mode, I can see:
- PRODUCT NAME: SM-T311
- CURRENT BINARY: Cusom
- SYSTEM STATUS: Custom
Is it related? Someone help plz...
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
anthony239 said:
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
Click to expand...
Click to collapse
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
The Dork Knight Rises said:
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
Click to expand...
Click to collapse
Yea im able to post over there now, thx
backup
anthony239 said:
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
Click to expand...
Click to collapse
dont you have cwm backup? if not then flash stock firmware ,find proper odin flashable packages for your device.
always make backup before flashing any rom.
anthony239 said:
Yea im able to post over there now, thx
Click to expand...
Click to collapse
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
The Dork Knight Rises said:
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
Click to expand...
Click to collapse
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
anthony239 said:
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
Click to expand...
Click to collapse
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
The Dork Knight Rises said:
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
Click to expand...
Click to collapse
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
Try fix or patch.
Or come back to stock rom.
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
Yup, I think you'd better to start over again. Try take a look at this : http://forum.xda-developers.com/showthread.php?t=2401901
It works well for my SM-T311 :good: Then you can reroot and make a backup from TWRP easily.
I also suggest you to take a look at this too : http://forum.xda-developers.com/showthread.php?t=2522091 From there, you can get PhilZ touch recovery based on CWM v.6.0.4.5
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
That's right, look at @Ferris Cruiser's post above. Should help.
(<---Remember to thank him and me if this helps.:good
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
anthony239 said:
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
Click to expand...
Click to collapse
Glad to help! :good:
HELP
I bought a Samsung Galaxy Tab 3 SM-T311 in Mainland China last month and I cannot install google play can anyone help.