Database Info

Can't complete new (stock) firmware upgrade

Is any one having a problem with downloading the new firmware using kies mini?
I am able to download all the binaries, my computer goes to the install progress screen, and my phone goes to download, but there is never any progress on the install screen, and after 5 minutes or so, Kies states that the download fails. I also tried the emergency firmware recovery. It does the same thing.
Everything is stock and locked.
Sent from my AT100 using xda premium

After I flashed the KD1 Deodexed ROM the upgrade worked great! Here's the link:
http://forum.xda-developers.com/showthread.php?t=1063696

Get to stock KD1 first then try again.

I'm seeing the same thing, and I am running stock KD1, other than the fact that it is rooted and has CWM recovery.
Ideas?

Mine bootlooped after the upgrade, and I tried to flash stock kd1 3 times and I finally had to wipe user data and cache before it finally took and then I was able to update via kies

In CWM do a factory reset, wipe cache, wipe Dalvik in advanced menu, and Go into the voodoo menu > Disable lagfix and /system lagfix off. Reboot and let linda deconvert the file system. Save any personal files off your SSD card and format it. Then try the update again.
kmandel said:
I'm seeing the same thing, and I am running stock KD1, other than the fact that it is rooted and has CWM recovery.
Ideas?
Click to expand...
Click to collapse

D12005 said:
Mine bootlooped after the upgrade, and I tried to flash stock kd1 3 times and I finally had to wipe user data and cache before it finally took and then I was able to update via kies
Click to expand...
Click to collapse
How do you delete data and cache? Does this mean all the apps that remember some state will lose it?
Specifically, after the binary download completes I get the error screen from Kies immediately and then a second or 2 later the download screen comes up on the phone, and it stays there until I reboot.

you wipe it in recovery, and you will lose everything but whats on your sd card. pretty much it will be like new state.

I went through the same process and it almost hard brick my phone, it wouldn't turn on or anything for 10 minutes. I had to downgrade to stock KB5 then upgrade using Kies.
This is the rom I flash with prior to upgrading through Kies.
http://forum.xda-developers.com/showthread.php?t=978836&highlight=stock

Success
I was also having issues upgrading ith Kies. I was hoping to find a stock KJ6 and flash with ODIN and I did on Piratebay, with instuctions on how to flash and root with Odin.
I have successfully upgraded to GB. Coming from Stock Froyo, rooted.
Having the SGS 4G upgraded to GB is an amazing experience.
Performance increased dramatically, Battery life is ridiculously better (26 hrs unplugged with auto sync on, and battery stats actually work now) lots of polish to TW, but I don't think its 4.0
Heres the link to the torrent. For anyone having issue, this is a great solution.
thepiratebay.org/torrent/6814104/Samsung_Galaxy_S_4G_Gingerbread_2.3.6_[KJ6]_Update_and_Root
I'm looking forward to custom ROM! Thanks XDA Members!

Piratebay link blah... Don't flash stock, unless you really like not having a rooted phone. If you want the new official GB, I recomend flashing http://forum.xda-developers.com/showthread.php?t=1351783 or http://forum.xda-developers.com/showthread.php?t=1323973 both of which are based on the new GB release.

If you can't get Kies Mini to work, you can always flash the update manually with Odin.
Here is the official update that can be flashed with Odin (you do have to extract first, so you'll need WinRar or 7-zip)
http://forum.xda-developers.com/showthread.php?t=1353176
This is assuming you are familiar with Odin... If not, here is a guide, or repost with questions. Good luck!
http://forum.xda-developers.com/showthread.php?t=1001759

[Q] Factory Data Reset and new question about recovery.

My SkyRocket is rooted and I have CWM installed. If I do a factory Data Reset from the "Privacy" menu within the phone will it set the phone back to its (out of the box) condition and will it take CWM off of the phone? The reason I am asking is because I have read several posts that claim you can not take an OTA update with CWM installed. I would like to have the option to remove CWM from the phone if it will not take the ICS OTA if / when it is finally released. If the factory data reset doesn't remove CWM from the phone, what is the best method of doing so (if it is needed for the OTA). Thank you.
Edit:
OK, I found a post in the "DEV" section with the original I727 factory ROM, which can be flashed via ODIN that should return the phone to its original "out of the box", unrooted, and CWM removed condition incase it is needed for the upcoming ICS update.
My question is: Is it possible to "just" reflash the "original factory recovery" part of the original ROM that came with the phone instead of reflashing the entire ROM, in effect, replacing CWM with the original recovery without disturbing the rest of the phone? This would basically be the reverse of how I installed CWM in the first place. Is this possible? Do the files (just the recovery part) for the 2.3.6 version of the original I727 (Skyrocket) exist in a flashable form file (TAR)? I don't care about the flash counter increasing because this isn't about returning the phone, it is about what might be needed to be done in preperation for an ICS OTA update. I figure these types of questions will only become more frequent the further into the first Quater of 2012 we get, so it will be an advantage to everyone to try and figure a few things out ahead of time. Thanks for any help in this matter.

scott14719 said:
My SkyRocket is rooted and I have CWM installed. If I do a factory Data Reset from the "Privacy" menu within the phone will it set the phone back to its (out of the box) condition and will it take CWM off of the phone? The reason I am asking is because I have read several posts that claim you can not take an OTA update with CWM installed. I would like to have the option to remove CWM from the phone if it will not take the ICS OTA if / when it is finally released. If the factory data reset doesn't remove CWM from the phone, what is the best method of doing so (if it is needed for the OTA). Thank you.
Click to expand...
Click to collapse
no.
factory reset will not touch your recovery, your kernel or your /system
it wipes /data which stores your settings/configuration/user-installed apps
it also wipes /cache
it does NOT touch the actual system ROM, so your root will remain intact, and your CWM will still be there.

Bump...because I added new question(s) to the OP. Thanks.

scott14719 said:
Bump...because I added new question(s) to the OP. Thanks.
Click to expand...
Click to collapse
While I'm not 100% sure, odin will flash back to a stock rom. However the tar that is around is a rogers rom. Ota updates should work.

mimart7 said:
While I'm not 100% sure, odin will flash back to a stock rom. However the tar that is around is a rogers rom. Ota updates should work.
Click to expand...
Click to collapse
This is the thread that has the I727 and the Rogers TARs.
http://forum.xda-developers.com/showthread.php?t=1342348
These are supposed to bring the phones back to the "Out of the Box" condition if flashed through ODIN (if I read it correctly).
What I am looking for is a way (method) to just flash the recovery part of this back to the phone, basically replacing CWM with the phones original Recovery. A reversal of flashing CWM to replace the stock revovery in the first place.
I like CWM and plan to install it back to the phone after the ICS update, but from what I understand (and I know it isn't final until the ICS update is released and someone with CWM tries it), phones with CWM will not take OTA updates.
I am looking for a way to just reflash the "recovery" part so the rest of the phone will remain the same (keep root, data, and applications). A full stock TAR would erase all of that. I know programs like Titanium backup will back these things up and then replace them, but just replacing the "stock revovery" by itself would eliminate the need to do so and should be quicker and easier.
I am on 2.3.6 so it would need to be a working TAR that has the 2.3.6 stock recovery (only) for the AT&T SkyRocket. If it doesn't already exist, I would certainly be willing to "Donate" to a DEV that could create such a working TAR. I bet a 2.3.5 and Rogers version would be popular as well.
If this has been done or can be done please let me know. Thank you.

Read this thread... it has a link to the stock UCKJ2 recovery tar. Not sure if there is any difference between 2.3.5 recovery and 2.3.6 recovery, however. Hope this helps: http://forum.xda-developers.com/showthread.php?t=1360943

just download the ics rom and load it up when it comes out. it'll be the same rom but you'll still be rooted.

The stock recovery.tar here works on 2.3.5 and 2.3.6 in order to take an ota update you need to flash the stock recovery.tar with odin, and have all bloatware intact. http://forum.xda-developers.com/showthread.php?t=1360943

DoctorQMM said:
Read this thread... it has a link to the stock UCKJ2 recovery tar. Not sure if there is any difference between 2.3.5 recovery and 2.3.6 recovery, however. Hope this helps: http://forum.xda-developers.com/showthread.php?t=1360943
Click to expand...
Click to collapse
silver03wrx said:
The stock recovery.tar here works on 2.3.5 and 2.3.6 in order to take an ota update you need to flash the stock recovery.tar with odin, and have all bloatware intact. http://forum.xda-developers.com/showthread.php?t=1360943
Click to expand...
Click to collapse
Thanks to both of you. This is exactly what I was looking for. I may just wait for the ICS ROM to surface and flash it, but if I want to take the OTA ICS update, this will be very helpful. As promised, I will go and "Donate" to the person that provided this TAR. Again. thanks.

Question about CWM before ICS update

I just rooted my TF101 using ViperMod but now I'm not sure whether I should install CWM recovery or not if I want to install further OTAs. I have read some threads but couldn't come up with a clear answer. I read somewhere that only stock recovery can receive OTA updates but also read that CWM can receive them too. If I can't install CWM then what ROMs can I install with stock recovery? What's the best way to go if I want to be ready for the ICS? Thanks!!

theremix said:
I just rooted my TF101 using ViperMod but now I'm not sure whether I should install CWM recovery or not if I want to install further OTAs. I have read some threads but couldn't come up with a clear answer. I read somewhere that only stock recovery can receive OTA updates but also read that CWM can receive them too. If I can't install CWM then what ROMs can I install with stock recovery? What's the best way to go if I want to be ready for the ICS? Thanks!!
Click to expand...
Click to collapse
Technically you'll still receive the OTA update you just can't apply it if you have CWM or a custom ROM installed.
You can't install custom ROM without CWM (if you have an older SBK tablet you can use NVFlash with a compatible ROM).

So I shouldn't install cwm until the ICS drops right?
Sent from my Transformer TF101 using Tapatalk

If you want to update to ICS via OTA don't instal CWM.
As you have been told, you will get the OTA message but the update will fail.
So you have two choices (or three):
* Keep stock recovery and update to ICS when the OTA update is available
* Install CWM and update to ICS as soon as a DEV publishes an ICS ROM
* Install CWM and remove it as soon as you know the OTA is due (pretty lame, but you could do it).
Regards.

CalvinH said:
If you want to update to ICS via OTA don't instal CWM.
As you have been told, you will get the OTA message but the update will fail.
So you have two choices (or three):
* Keep stock recovery and update to ICS when the OTA update is available
* Install CWM and update to ICS as soon as a DEV publishes an ICS ROM
* Install CWM and remove it as soon as you know the OTA is due (pretty lame, but you could do it).
Regards.
Click to expand...
Click to collapse
Thanks, I think I'll just wait for the OTA as I want to update as soon as ICS drops in.
Sent from my PC36100 using Tapatalk

I have a question about removing CWR. Actually 2.
1. Can't we just uninstall and wipe data with Titanium since it was installed as an .apk- from Gnufabio? (pretty sure this won't work but thought I would throw it out there anyways). Where is the recovery located on a tablet (what folders) Same as in phones?
2. Can we just flash the stock recovery by itself and not reset back to .13 or younger? If I am running stock ROM, it seems that I should be able to just reflash the stock recovery and replace it w/o changing the ROM or factory reset.
I have no problem doing it the long way but if it doesn't need to be done and we can replace the CWR with stock and not tamper with the ROM, it seems logical.
Clearly I just got the tab recently and have been reading and reading but they seem so much different than the way phones work. I am very comfortable flashing ROMs/Kernels/Mods on phones, but just a little intimidated with the tablet (for now).

Woodrube said:
I have a question about removing CWR. Actually 2.
1. Can't we just uninstall and wipe data with Titanium since it was installed as an .apk- from Gnufabio? (pretty sure this won't work but thought I would throw it out there anyways). Where is the recovery located on a tablet (what folders) Same as in phones?
2. Can we just flash the stock recovery by itself and not reset back to .13 or younger? If I am running stock ROM, it seems that I should be able to just reflash the stock recovery and replace it w/o changing the ROM or factory reset.
I have no problem doing it the long way but if it doesn't need to be done and we can replace the CWR with stock and not tamper with the ROM, it seems logical.
Clearly I just got the tab recently and have been reading and reading but they seem so much different than the way phones work. I am very comfortable flashing ROMs/Kernels/Mods on phones, but just a little intimidated with the tablet (for now).
Click to expand...
Click to collapse
1- The RecoveryInstaller app only help to flash the recovery image so no you can just delete it.
2- You can flash a stock recovery image via CWM. You can get a repacked version here.
http://forum.xda-developers.com/showthread.php?t=1154947&highlight=unroot

baseballfanz said:
2- You can flash a stock recovery image via CWM. You can get a repacked version here.
http://forum.xda-developers.com/showthread.php?t=1154947&highlight=unroot
Click to expand...
Click to collapse
I figured that would be the case with the executable part of the apk.
I read that thread but wasn't sure if only the stock recovery by itself could be flashed w/o the prepacked ROM.

[Q] Firmware Update Not Completing

I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?

rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:

Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD

I'm rooted.
Sent from my DROID RAZR using xda app-developers app

exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.

ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.

Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse

ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data

ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.

Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse

if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it

Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse

ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.

This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse

Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!

rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?

Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.

Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!

Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help

Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g

Jelly Bean OTA

FOTA ripped for your enjoyment.
https://mega.co.nz/#!xoZigSqS!YHUa5Umv-8qjyFV1dtHs4lDQXMIn1q7plTz3zWeYSwY
That's completely unmodified. (I tried just installing it in CWM. Think I probably bricked doing something silly...)

I pulled this as well, but I'm curious if you had to flash back to stock firmware and recovery to get it. I tried using a rooted stock rom and the software update screen would give me a "modified devices don't get updates" message. I actually had to have stock recovery and system installed so that it would download. Did you have to do the same thing?

gee one said:
I pulled this as well, but I'm curious if you had to flash back to stock firmware and recovery to get it. I tried using a rooted stock rom and the software update screen would give me a "modified devices don't get updates" message. I actually had to have stock recovery and system installed so that it would download. Did you have to do the same thing?
Click to expand...
Click to collapse
Interestingly enough, it downloaded perfectly fine for me, even though my device was "modified"...

bigleague4040 said:
Interestingly enough, it downloaded perfectly fine for me, even though my device was "modified"...
Click to expand...
Click to collapse
I have a modified boot.img- perhaps that blocks the ota?

My device is rooted.
It is on 4.2.1 genuine T-mobile software.
When I want to update OverTheAir this message pop out.
See attachement (I don't know how to put image here).
What can I do to update OTA?

I played around with this a while ago (my flash counter is at 29 last time I checked).
I think you have a few options:
1) maybe unroot and that might remove the modified status
2) use heimdall or odin to flash back to unrooted stock, including stock recovery and boot.img
3) flash one of the rooted JB roms, either stock, cyanogen, or our very own Teamapexq rom
4) download the OTA or the JB rom from the web and repackage it yourself to a flashable zip.
Option 1 might not work. Option 2-4 will work, 4 would be the most fun.
sent while running with scissors

gee one said:
I played around with this a while ago (my flash counter is at 29 last time I checked).
I think you have a few options:
1) maybe unroot and that might remove the modified status
2) use heimdall or odin to flash back to unrooted stock, including stock recovery and boot.img
3) flash one of the rooted JB roms, either stock, cyanogen, or our very own Teamapexq rom
4) download the OTA or the JB rom from the web and repackage it yourself to a flashable zip.
Option 1 might not work. Option 2-4 will work, 4 would be the most fun.
sent while running with scissors
Click to expand...
Click to collapse
OMG, I would like to do it with no hassle.
I just want something to work ... grrr.

Option 2 would probably be the most straightforward. Essentially, you are unrooting. I just remembered, Samsung has Kies which might restore it to stock. You can download it from their website.
sent while running with scissors

mazak23 said:
My device is rooted.
It is on 4.2.1 genuine T-mobile software.
When I want to update OverTheAir this message pop out.
See attachement (I don't know how to put image here).
What can I do to update OTA?
Click to expand...
Click to collapse
the update in this thread is only about JB 4.1.2 that is officially the latest and the last one for our mobile. your message box is normal, there is no need for the usage of the OTA anymore since then. if u want to update to JB 4.3 follow this unofficial image:
http://forum.xda-developers.com/showthread.php?t=2463661

Holy thread resurrection Batman!!!
Oh boy. Here we go. Having troubles here.
I am trying to re-flash my phone to stock so I can return it under the protection plan. I firmly believe my radio might be on the fritz.
Anyway, I used the directions here:
http://theunlockr.com/2013/04/25/how-to-unroot-the-samsung-galaxy-s-relay-4g-sgh-t699/
Now it all completed successfully, and the phone is chilling at the SAMSUNG screen trying to boot. Not sure what to do at this point. Its been sitting there for a good 5 minutes.
Please help!!
UPDATE: Went into stock recovery, cleared Cache and Data, then rebooted it again, and it booted!

Which JelyBean Version...!!!
After installing this update what will be my os (JB 4.X.X) version???

saurabhsaurabhrai said:
After installing this update what will be my os (JB 4.X.X) version???
Click to expand...
Click to collapse
it is just from stock, will be updated to JB 4.1.2