on cm10 when I check usb tether, windows will begin installing drivers, but the usb tether will uncheck itself and cause the drivers to not install, hence me not being able to tether.. is this a problem with cm10? or ics? im looking for a rom that will allow me to usb tether.
Related
cant seem to find the drivers
http://www.samsung.com/us/function/...t.do?input_keyword=sch-i510&keywords=sch-i510
**Found Drivers
http://diegomejia.globat.com/android/samsung/droidcharge/Samsung_Mobile_USB_Driver.exe
They are on the phone. Plug it in and open the virtual drive it creates.
im having the same problem how am i suppose to open up the virtual drive when my computer doesn't recognize the device because theres no usb drivers?
i got it, you can't already have it set to usb debugging before you install the usb drivers for the first time
That's right, USB debugging must be turned OFF. I still had trouble but eventually I was able to grab the driver package off the phone and install it. If anyone still has problems, send me a PM with your email address and I'll send you the drivers (8.1MB package).
I just got a new Win7 Pc and now when I try to connect my Xoom to it it says Unknown MPT device. I tried installing the drivers to no avail. I didnt have this problem on XP. I am running stock ICS on my WiFi Xoom. Any ideas?
Where did you get these drivers from? Try the ones directly from Motorola.
You could drive removing the current drivers and SW. Try just using the device then runnign the moto install for those drivers. Make sure USB is enabled correctly on the tablet too. Is it charging from the usb connection? You could try a different port it shoudl charge regardless.
drew4452862 said:
You could drive removing the current drivers and SW. Try just using the device then runnign the moto install for those drivers. Make sure USB is enabled correctly on the tablet too. Is it charging from the usb connection? You could try a different port it shoudl charge regardless.
Click to expand...
Click to collapse
Xoom doesn't charge via USB..
I am using the drivers and software directly from Motorola. I have tried it with USB debugging on and off. I have tried switching it from MTP to PTP on the Xoom and still the same results.
bigslam123 said:
I am using the drivers and software directly from Motorola. I have tried it with USB debugging on and off. I have tried switching it from MTP to PTP on the Xoom and still the same results.
Click to expand...
Click to collapse
Go into device manager and see what's up. Make sure xoom is plugged in beforehand. Right-click My Computer -> Manage -> Device Manager.
If there are no errors (!) to do with the xoom, then some form of driver is installed. Manually delete these by right-clicking on them.
Then take out xoom, and put it back in. Win7 should automatically find the MTP drivers.
TheStickMan said:
Go into device manager and see what's up. Make sure xoom is plugged in beforehand. Right-click My Computer -> Manage -> Device Manager.
If there are no errors (!) to do with the xoom, then some form of driver is installed. Manually delete these by right-clicking on them.
Then take out xoom, and put it back in. Win7 should automatically find the MTP drivers.
Click to expand...
Click to collapse
I'm getting the same exact problem and I've gone through uninstalling windows media 12 to acquire the mtp drivers and nothing, i can't even get it to install wmp11.grrrrrrrrrrrrr
does the xoom show up in Windows Explorer under "Computer"?
This will definitely seem like a repeat thread but as far as I can tell this specific issue has not been solved.
I have a rooted lg p999 so g2x or optimus 2x using clockworkmod.
I am trying to use USB tethering to use my phone internet connection on my computer (my computer does not have a wireless card).
If I am correct from what I have read I first download and install the lg united usb drivers package.......DONE
Next I plug in my phone via USB to my computer and some things should pop up and install.....SEMI DONE
One device LGE Android Phone does not install any drivers because it says it cannot find them.
To solve this I have tried downloading the tether inf file but that does not work as a driver for this device. (possibly i cannot find the correct inf file online?)
Next to solve this i tried manually installing remote ndis drivers from a list of network adapter drivers as mentioned here
http://forum.xda-developers.com/showthread.php?t=1120552
but when I get to network adapters nothing is found.
For the record in device manager LGE Android Phone shows up with the ! under other devices and only the onboard network card shows up under network adapters.
Any help would be greatly appreciated. Thanks in advance.
What ROM and kernel do you have?
Sent from my LG-P999 using xda premium
If you are running an ICS based rom, the upgrade to ICS broke USB tethering. if not then we will need more info.
i can use usb tethering when i use android 4.0.4,drivers are ok.but in 4.2.2 computer cant find modem driver.
same here
anyone?
Hi! Me too
I've downloaded this driver http://forum.xda-developers.com/showthread.php?t=445436 and fellow the instructions.
Next I've downloaded the reverse tether app (search in Google Play... but I've downloaded the full apk )
In this configuration: usb connected with usb tether and debugging activated.
and the app shows me "Usb is not connected".
Also I've tried deactivating the debugging, but the problem continues.
I have Windows XP SP3.
PC-side:
Appears a RNDIS driver, I've installed it following the instructions of the first link.
But the system asks me about a device called HTC.
Where is it? How can I get usb tether?
Thanks in advance
PD: In some web pages some people say that in CM10 the usb tether isn't functional.
anyone got other workaround?
cm10.2 too, oh my...
sent from Timbuktu Post Office
i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask
Young_Azul said:
i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask
Click to expand...
Click to collapse
Hi,
Several things you can try:
Re-install the drivers/HTC Synch
Check my signature for windows 7 & 8 drivers.
Try a different wire.
Try different usb slots ( front and back,and not usb hub)
Young_Azul said:
i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask
Click to expand...
Click to collapse
I've played around with the ROM, and this is a bit of a bug. Tethering is the main problem, as the device won't use MTP while tethering is enabled. Whenever it does manage to connect, it will only attempt to tether a connection.
Disable that first by connecting the phone to a PC, when connected click the notification and disable tethering.
You can then use the SD Manager application to connect as mass storage, or you can attempt to use the ROMs in-built MTP transfer.
Also try out Malybru suggestions and see if you can get a more stable connection.
DennisBold said:
I've played around with the ROM, and this is a bit of a bug. Tethering is the main problem, as the device won't use MTP while tethering is enabled. Whenever it does manage to connect, it will only attempt to tether a connection.
Disable that first by connecting the phone to a PC, when connected click the notification and disable tethering.
You can then use the SD Manager application to connect as mass storage, or you can attempt to use the ROMs in-built MTP transfer.
Also try out Malybru suggestions and see if you can get a more stable connection.
Click to expand...
Click to collapse
thanks i will see what works right now im using wifi file transfer as a quick fix but i need the cable to work so i can watch my movies on my tv