I have flashed JELYBAM rom to my LG O3D and when i reboot it after instalation it has no signal and turns itself off after a minute or so.
When i push the power button it doesn't always power on but after a random amount of tries it turns on.
When it turns on it either has signal but i can only make one phone call and after that it shows signal but i can't call anyone.
When i try to do so it immediately shows me "call ended"
People call me and they hear the ringing but my phone doesn't ring.
Or it has no signal, turns off and i have to reboot it until the signal is back, but again, i can only make one phone call.
How do i fix this?
Search a bit in this forum and you will find that you have to flash baseband v21a
Sent from my 3D phone.
Related
Is it possible to activate the loudspeaker on my Xda before choosing a telephone number?
Dial a number. Disconnect and tap onto the signal symbol in the title bar. Tap onto the disconnect telephone button and then immediately press the green button (accept telephone call) keeping it pressed until the note appears: The loudspeaker is activated.
The telephone then disconnects without establishing a connection. The information that the loudspeaker is activated remains.
Turn on the telephone. The loudspeaker is turned on instantly with each dialled number.
thats the info in their faq section but i dont understand???? what ive been trying to do is:
dial 4444....
hit the red button and then click the signal bar at the top of the screen
tap red button then hold green button down....
just doesnt do nothing :\ anyone know how to do this?
figured it out
right.......
phone loaded up as normal
dial any number and use the stylus to tap talk on the screen
then when connected use stylus to hit end on the screen
then quickly tap the signal bar and hit turn phone off or flight mode on
then quickly hold down the green BUTTON and speaker phone will turn itself on and the phone will turn off.
then just tap the signal bars again turn the phone part backon
there you go you now have h/f mode on all the time good for when driving
gaz
Yup, it works, a real convoluted way of doing things dont you think but something I have been trying to do for ages and finally gave up. Thanks
i wouldnt call it a propper way of doing it lol id call it more of a glitch in ppc lol but at least it works but you dont get no tones from keypad numbers if you turn them on and then so softreset they come abck on but h/s mode disapears......
but guess whats in my statup folder for some strange unknown reason a shortcut to handsfree.exe i click it it doesnt seem to do nothing but its just appeared in there for no reason.
ive searched windows directory and cannot see handsfree.exe so i linked to my pc to search found it i try copy it over from the ppc to my xp pc with show all files turned on but the icon just dissapears then i try copy it over again and it says do you want to overwrite this file so its on my pc but it just dont show up :\
it would be great if i could get this h/f thing into my startup lol so it comes on when turning the phone on
gazzaman2k said:
then quickly tap the signal bar and hit turn phone off or flight mode on
then quickly hold down the green BUTTON and speaker phone will turn itself on and the phone will turn off.
then just tap the signal bars again turn the phone part backon
Click to expand...
Click to collapse
I can't believe O2 tells people to do this. Surely the effort of coding this small feature s less than the extra hassle of having your customers perform such 'dirty' workarounds.
There's some serious glitches in the support->coders communication pipeline for these devices, I tell you.
i totally agree
it would be nice if it done like......
when receiving a call and the screen pops up answer / reject
if it had aonother box option for like loudspeaker answer that would be cool
Maybe obtuse, but it works
On several occasions, I had fumbled fingered my PPC during a call and wound up with the H/S turned on semi-permanent. I never could figure out what I did. This is great info, but I agree, a nice little app would be a LOT better.
david
when u do this after turning the fone part back on hold the green button it goes off hold it again it comes back on if you tap the green button the telephone screen shows tis pretty cool but the device liek sounds low? till after the softreset
The other way round?
Having turned the XDA II off for a flight by powering down rather than putting on flight safe mode, all phone calls now are handsfree. How can I get it back to 'normal' mode?????
Driving me insane!!!
I held off from posting this, because I can't seem to find a reason why it's happening.
Basically, I'll get a phone call. I'm close to the phone, and have no problem answering it immediately. But maybe 3 out of 7-8 calls, I can't answer it. It'll just keep ringing until the calling party gets my voicemail. I hit the green phone button, the left menu button (for answer), even the word "answer" on the bottom of the touch screen itself. No matter what I do, the call will not pick up. Keep in mind, there is no Bluetooth involved. If I do happen to have a bluetooth earpiece on, I can hear the call ringing in the earpiece, but pressing the action button doesn't pick up the call like it should.
I'm at my wits end here. What could possibly be causing this?
Edit/Delete Message
Is your memory getting junky? I presume that the call application takes a lot of memory that it got full and had nothing left to take your response back Im not sure though. Do you ever get complaints like no signs of an Incomming call when people call you? I get it sometimes and still exploring to find a solution.
Regards,
Carty..
The only 3rd party app I have installed is Opera Mobile. I only run it when I need it, and always use the "exit" option. I keep my phone as fresh as possible by killing unnecessary apps. The only things that stay open are my threaded message chat and Outlook.
As for your missed call (straight to voicemail), this happens to everyone not on 3g. For some reason, voice calls will not go through when there is net access. I don't know why this phone can't prioritize. My BB Pearl had no problem with that. If I was loading a webpage, it would simply pause the download and the phone would ring. Not sure, but maybe it has something to do with EDGE. I don't think the Treo 750 has EDGE capability...
The 750 definetly has EDGE, but it's usually CDMA phones with 1x that have the issue of not being able to take a phone call while transfferring data. It does sound like you could have another lemon 750 on your hands.
Flapjack said:
I held off from posting this, because I can't seem to find a reason why it's happening.
Basically, I'll get a phone call. I'm close to the phone, and have no problem answering it immediately. But maybe 3 out of 7-8 calls, I can't answer it. It'll just keep ringing until the calling party gets my voicemail. I hit the green phone button, the left menu button (for answer), even the word "answer" on the bottom of the touch screen itself. No matter what I do, the call will not pick up. Keep in mind, there is no Bluetooth involved. If I do happen to have a bluetooth earpiece on, I can hear the call ringing in the earpiece, but pressing the action button doesn't pick up the call like it should.
I'm at my wits end here. What could possibly be causing this?
Edit/Delete Message
Click to expand...
Click to collapse
My experience wasn't as bad as yours. It just took a very long time between seeing the ringing icon and the time the phone actually rings, and then a long time between pressing the answer button and the time the call started.
I upgraded to WM6 and from the few calls I received since it appears the problem is now resolved and the 750 behaves like a normal phone.
Hope this helps.
Y.
Flapjack said:
I held off from posting this, because I can't seem to find a reason why it's happening.
Basically, I'll get a phone call. I'm close to the phone, and have no problem answering it immediately. But maybe 3 out of 7-8 calls, I can't answer it. It'll just keep ringing until the calling party gets my voicemail. I hit the green phone button, the left menu button (for answer), even the word "answer" on the bottom of the touch screen itself. No matter what I do, the call will not pick up. Keep in mind, there is no Bluetooth involved. If I do happen to have a bluetooth earpiece on, I can hear the call ringing in the earpiece, but pressing the action button doesn't pick up the call like it should.
I'm at my wits end here. What could possibly be causing this?
Edit/Delete Message
Click to expand...
Click to collapse
I am having the same problem if you come up with a fix please let me know. the only thing I found that helps is to make your phone ring longer to give you a better shot at answering. here is a link to this fix
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=14,E=0000000000733632393,K=830,Sxi=4,Case=obj(43528)
Hi,
i get this issue within one week after purchase due to some personl reson i cant go to d servc center. d problm is my sg2 goes into deep sleep and doesn't wake up on incoming calls or messages or by pressing any of the buttons. Only available option is to keep the Power button pressed for 10 sec to restart it.
Strange thing, although it doesn't answer to any command the phone is connected to the network, people are calling and for them is ringing and no answer. But for me nothing showing and after restarting there is no log of the calls or messages received during this SOD stage.
It doesn't happen everyday, like 1-2 times a week, but is very annoying to check continuously on your phone to be sure is still working.
Hello.
I changed ROM from stock 2.3.5 to CM11 Open Desire) and now i have problem with ending calls. When i'm initiating call or respond to the incoming call, after closing phone to ear, screen goes blank. It's normally. But when i want to end this call, after removing phone from ear, sometimes screen doesn't get to work for several seconds and i can't tap the hang up button. Sometimes i have to wait for the other side to hung up to get the screen back to work. Until this, the phone not respond for buttons. Sometimes screen back to work and there is a calendar app running and bluetooth turning on (and both of them were off before call).
Sometimes everything is ok and i can't figure out - where is problem?.
I'm 100% sure that it's not a problem with proximity sensor, because on stock ROM sensor worked perfectly.
Hi everyone!
I have a situation here. I have this old A106, i am using as a secondary phone. Upgraded it to lollipop 15-20 days back and since then something or the other is happening with the phone.
First was the proximity sensor, the screen would shut off right after i dial a number and wont come up unless i press the power button. The proximity sensor is not functioning at all i guess.
Secondly, since this morning, I am unable to receive any calls on my phone. The phone rings, I swipe it to the right but nothing happens and the icon comes back to the middle, and within a few seconds the call gets disconnected.
Tried factory reset/data wipe from recovery but it didnt fix the issue. Any help would be highly appreciated.
Thanks, Have a good day!