hi everybody, im asking for help, i have a atvio smartpad 2 model MID7108SC, the problem is that passed through supermarket sensors, and when i tried to turn it on again, all that the tab do is show atvio logo on the screen.... i´ve been searching in forums and some methods and techniques, i tried to flash a stock firmware whit livesuit, a ics firmware for this device through livesuit too but the bar just stay in 0%, my drivers seems ok, i think that maybe the debug mode wasn´t active before the tab passed the sensors in the supermarket, and obviously i cant activate it ´cause the system can´t run........ANY IDEA? :crying:
Related
Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........
still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue
hey guys
still no further any one have an idea what i have done and how to reverse it
????????
hey guys, because of some errors in the system and after a lot of research, I found a rom that claimed to be compatible with my device, but whn i update it with "smart phone tools flash" the phone no longer boots, a screen appears only with a distorted screen and flashes. .. now the pc no longer recognizes the phone.
MY Phone is Star X19i
This is my work phone and i need help.
tnks
:good: Hello to all!!! :good:
For years, I read a post on xda and I'm very excited to write here ...... :crying::crying::crying:
---- I start with him to apologize for my English, I'm italian and i used google translator ---
I have this tablet:
TREKSTOR SURFTAB Ventos 7.0 (M.no. ST70208-2).
Unfortunately for some reason ( I have not figured out how ) does not start anymore.
No signs of life, has died.
It has no LED that alerts you when the tablet is turned on, until a few days ago I thought that the battery was dead.
Connecting it to my pc (win7) I noticed that the device is detected as "M6-CHIP"
On Google I found the drivers AML BURNING TOOLS and installed them
I'm trying to reinstall the firmware from the official site but unfortunately there is no firmware for this tablet.
Can you help? Parts in any way
P.S. is no longer under warranty
Other info
I tried using AML BURNING but without success. I do not know where to start.
Unfortunately I can not even load a firmware update via sd card why do not you turn on the display. I can not go into recovery mode.
Hey guys I'm new here and I found myself with a situation. Sorry if this isn't the right area to post this.
So my friend has this tablet: Storex Ezee Tab 74D14-S. And it got bricked, stuck on logo screen.He doesn't have warranty. Tried hard reset, power volume +/-, got into recovery mode and wiped cache,factory reset all that stuff. Yet it's still stuck on logo screen. So I went searching for firmware to install the OS. I found this link but I can't post it due to not having permission yet, you can find it by searching "Storex Ezee Tab 74D14-S firmware" first link, first PDF and it has 2 links. So I downloaded the firmware and the program to try it out. However to use this program, called phoenix I need to have USB Debugged on, and I can't do that obviously. Went searching for custom ROM's but I didn't find anything for this tablet. Also I'm no expert on rom's and I don't wanna screw this even more.
So I'm opened up for suggestions guys. Thanks.
EDIT: Is there a way to reinstall firmware from recovery mode? I can seem to get into recovery mode, but it can't be charging or else it doesn't work, although it's a bit buggy can't go up only down and says "No command".
UP
Still need help
UP still need help guys
Hello, i have a problem.
My friend gives me tablet tht didnt work. I fixed it, but now touchscreen is not working. I checked all trains ( plumes), they are okay. I cant tell right name of my tablet bcoz i dont have box from it. If u can tell me how to find it out - i can do it, i think.
Screen is HannStar ( hx8851-f ), and touchscreen version probably is FT5506EEG .
from back it says " Ampe A10 " will be very happy with any kind of help.
I was trying to install different firmwares, but still face this problem.
Also i can install it only from default recovery bcoz i cant enable debugging mode from tablet for obvious reasons
Hi
Even if you likely have a faulty screen you could explain your situation in this thread: http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!