hey guys, because of some errors in the system and after a lot of research, I found a rom that claimed to be compatible with my device, but whn i update it with "smart phone tools flash" the phone no longer boots, a screen appears only with a distorted screen and flashes. .. now the pc no longer recognizes the phone.
MY Phone is Star X19i
This is my work phone and i need help.
tnks
Related
Hi Forum , I reflash my H2000 because I lost my Imei´s .
I bought a cable for flashing, but with a single USB, not with multi-port - 3 USB - as it appears in all of the instructions to load Firmware.
I installed the driver, run the program load "SPMultiPortFlashDownloadProject" of "BURNTOOL_SP_Download_L1104_V3.2.4". It run correctly the formatting but it couldn't load the Andriod and now I have the phone with black screen.
I would appreciate much if you can help me with how to load the Android and recover the phone.
Thanks
:/
It happened to me too
I think we lost our phones
Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........
still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue
hey guys
still no further any one have an idea what i have done and how to reverse it
????????
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
rodrigocswm said:
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
Click to expand...
Click to collapse
Sorry, I wrote hard brick in the title, but actually just learned the real difference between soft brick and hard brick, and my problem is soft brick
Hi, thank you for using XDA Assist. The purpose of XDA Assist is to point you in the right direction, it's not a help desk. See this, http://forum.xda-developers.com/showthread.php?t=2764768. Since your looking in the right place to get your question answered I'm going to close this thread.
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
strix666 said:
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
Click to expand...
Click to collapse
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
paywand said:
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
Click to expand...
Click to collapse
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
strix666 said:
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
Click to expand...
Click to collapse
dear strix666
i'm very sorry but the (recovery_TWRP_2.6.3.0) is a recovery used for lenovo phones specially lenovo p780 and as the most common results there are 3 things that happen :-
1. the phone gets bricked possibility : %70 (your current phone situation)
2. the phone gets stuck in a boot loop possibility : %22 ( thats what happened to your phone at the first flash )
3. the phone stays safe and nothing happens possibility : %8 ( impossible )
and so after you tried to fix it by flashing it 2 times again it is commonly bricked which can't be fixed easily and the only way to fix it is by using apps similar to odin.
but before that i need to need know some other details :-
1. does it charge or show the charging icon?
2. try to hold the volume down and power key for about 15 seconds anything happened?
3. connect it to your pc and go to | start menu > devices and printer > right click your device > troubleshoot
and if it doesn't appear please tell me.
by the way my name is paywand and sulaimaniyah is my city
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.