Related
Hello together,
I got a realy big problem. I had a power breakdown at home while I flashed a new rom on my XDA Neo. Because of the breakdown my computer made a restart and disconnected to my XDA. The flashing process stuck on the XDA at 60%.
Now the XDA just shows a 3 colored screen and doesn´t connect to my computer.
Could anybody help me please?
Greetz Scr33ch
suggestion
1. switch on your device.
2. connect your device with usb cable to your pc/laptop.
3. go to your RUU & flash it again.
cheers..
Thanks a lot Duato.
I just thought this wouldn´t function because active sync didn´t show any connection between my computer and the XDA.
yups, your pc activesync doesnt show connection but you can flash it again.
i've been thru the same problem, stuck on the 3 color screen. i flash it & everything works nicely.
cheers..
Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
MOD EDIT Note : first check here & see if u can get ur answers & then ask ur questions
Link : http://forum.xda-developers.com/showthread.php?t=858583
in future all questions should be asked here only
Why is it when I flash a custom firmware, wifi does not work?
Sent from my Samsung Galaxy 3 FROYO
What firmware did you flash ?
JPB.
Sent from my Samsung Galaxy 3 FROYO
Gsam101 said:
Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
Click to expand...
Click to collapse
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
The Dark Lestat said:
JPB.
Sent from my Samsung Galaxy 3 FROYO
Click to expand...
Click to collapse
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
haree said:
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
Click to expand...
Click to collapse
I know, but I'm talking about a custom ROM that I am creating.
Wifi never works upon multiple hard resets/wipes.
Anyone able to install the new honeycomb 3.0 music player
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
haree said:
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
Click to expand...
Click to collapse
hi hari what about htc touch 3g have u given up on it
:-(
anujsh said:
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
Click to expand...
Click to collapse
No, I wasn't.
Screen periodicaly blinks ON and OFF
GT-I5800 FROYO.XXJPA
After additional factory data reset (it was made with keyboard code, because hard reset buttons combination does not wok) and first clean connection to Google account without any additional installs to phone, it began to blink every 2 seconds. Google account was changed to different one.
On locked mode phone's screen lights ON and OFF non stop every 2 seconds and like asks to unlock. It lights several seconds.
On unlocked mode after screen time out period, screen goes off, but after second of time switches lighting on again and does not lock again.
I seems that phone tries to lock, but can't do that for some reason.
It drains battery very fast way.
On first booting of phone after factory reset, I did not noticed such blinking.
I've noticed, that phone screen started to blink after the first contact was entered to address book and after WiFi and 3G data transfer connected.
I've tried to switch off WiFi and 3G/GPRS data transfer - did not help after that. Screen blinks. So it seems it is not Google account problem.
Maybe contacts? Or phone service download something in background from network? Incredible.
Before factory reset and phone user (and Google account) change my phone with this firmware version FROYO.XXJPA has no such problem. JPA is a little buggy, but it worked. Currently screen blinks and I have no idea where is the problem. It does not look like it could hardware problem.
One additional notice: phone stills has battery problem. It shows that battery dries out, phone switches off. It to switch it on again, battery indicator shows at least 50% again.
Last step what I could try - flash another firmware version and format SD card.
Thank You.
Does anyone know what is the maximum data transfer speed of the Galaxy 3 memory card reader? Is it worth to purchase a faster memory card than Class 4?
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
stubborn_d0nkey said:
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
Click to expand...
Click to collapse
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Hi i have Samsung Galaxy 3 DA:JH7,PHONE: JG3,CSC: JG2 android 2.1 update 1 in Kies no have fw update for me the phone is locked from Vodafone es .Can I upgrade my phone to android 2.2 or 2.3
haree said:
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Click to expand...
Click to collapse
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
stubborn_d0nkey said:
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
Click to expand...
Click to collapse
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
haree said:
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
Click to expand...
Click to collapse
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
stubborn_d0nkey said:
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
Click to expand...
Click to collapse
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
haree said:
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
Click to expand...
Click to collapse
lol, something was wrong with my phone, that is why i asked, lmao. what you said happens when everything is working correctly, and lol, I know charging happens, however that is all that happened, like I said it acted as though it was hooked up to a charger, not usb. Which obviously means charging + no usb stuff. I said that I could change usb(including debugging) settings while connected, which you shouldn't be able to do while connected to usb. You just misunderstood the problem I had
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Click to expand...
Click to collapse
Awesome u are the best..!!
Mastermind_hassan said:
Awesome u are the best..!!
Click to expand...
Click to collapse
Did you get your phone back to life?
banglastyle said:
Did you get your phone back to life?
Click to expand...
Click to collapse
Absolutely.!!
You are a miracle worker! Took some time but it finally worked! Thank you!!!!!!
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
THANK YOU! You saved my phone. I can only get it to flash the Wind mobile version but that is a great start and my phone is usable now.
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
many thanx
only v11h worked out (link here http://forum.xda-developers.com/showthread.php?t=1594396)
My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.
fostrike said:
My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.
Click to expand...
Click to collapse
I have exactly the same situation, in S/W Update mode no devices are found by Windows, but when boot in Android all devices are found. If you found some solution please publish.
Thank you, Guide worked on my dead phone. Now is live.
I was only able to revive it to the Canadian software and baseband but I already sold my phone so I'm off to bigger and better devices hahahaha
Sent from my SAMSUNG-SGH-T989 using xda premium
thank you this will come in handy
I've had my G2x for a while now had many bugs and lags at start but with ICS Roms i am liking my phone !
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
I have to thank you for this as it saved my new phone.
thanks a lot
Subtleone said:
I have to thank you for this as it saved my new phone.
Click to expand...
Click to collapse
Finally my partially working G2x is restored to working condition but as mention by others i could only flash the Wind mobile baseband. Even though its usable, the voice quality isn't much clear.
Any suggestions for improving that?
will this work on lg lte lu6200? its dead ive flash a wrong kernel... wont turn on, not charging.. no power or lights at all.
When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?
no s/w upgrade screen
exaphor said:
When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?
Click to expand...
Click to collapse
Holding both buttons vol up + down and plugging in the computer while the battery is out is to install the apx drivers i.e nvidia drivers. It is supposed to remain black. not having s/w upgrade screen is not an issue.
dear, pls i need your help. i flashed preloader and now my phone is dead, i want to try meta mode because my pc is only showing comport when i connect my phone (no vcom). its a galazy A9 6 clone. i found kpcolo and wanted to know if its the same as kcolo / colo? i'd be very gratefull if u can help me out here
I have a weird battery bug with the TamsuiCM11 from @UltraGamerHD for Xperia E. I know that for some user, their battery display is stuck at 100% and can't charge.
On my device the percetage is correctly displayed and updated but I still can't charge. Neither with the charger nor on a computer. And my computer won't recognise it either, I also can't access its internal storage.
The offline charge doesn't work either. When I turn my Xperia E off and connect it to the charger the phone simply boots up the CM11 without going into the offline charge mode.
It doesn't seem to be a problem with the kernel, since the phone does charge the battery in the recovery mode.
I installed CM11 just like the instruction said. Does anybody have the same problem?
Edit: I just saw that UltraGamerHD relased the alpha 3. I should probably mention that I tried this with Alpha 2 yesterday.
Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.
-Install Android terminal emulator
-Open it and type:
echo 08> / sys/devices/i2c-2/2-0034/axp20_reg
[Press enter]
echo 0800> / sys/devices/i2c-2/2-0034/axp20_reg
[Press enter]
-Reboot device
-Discharge and recharge battery
-It will help you
P.S. Sorry for my english
NSDCars5 said:
Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.
Click to expand...
Click to collapse
Thanks for the suggestion. I currently don't have CM11 on my Xperia E to test it, but isn't "MTP" already the default setting for it? At least on the stock ROM it is the default. The battery won't charge right from the get-go, immediately after I've flashed.
CharredBrain said:
Thanks for the suggestion. I currently don't have CM11 on my Xperia E to test it, but isn't "MTP" already the default setting for it? At least on the stock ROM it is the default. The battery won't charge right from the get-go, immediately after I've flashed.
Click to expand...
Click to collapse
On CM11, the stock setting is nothing - that is why your phone can't talk to the charger and/or computer.
NSDCars5 said:
Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.
Click to expand...
Click to collapse
Hi, I have this problem..I changed it to MTP, but my Xperia E still doesn't connected to my PC. Then I changed it to PTP and Xperia E connected to PC. Can you help me? I hope so and I hope you willl understand my noob english
Tallahassee[CZ] said:
Hi, I have this problem..I changed it to MTP, but my Xperia E still doesn't connected to my PC. Then I changed it to PTP and Xperia E connected to PC. Can you help me? I hope so and I hope you willl understand my noob english
Click to expand...
Click to collapse
Maybe your PC doesn't support MTP - does your phone charge when you use MTP?
NSDCars5 said:
Maybe your PC doesn't support MTP - does your phone charge when you use MTP?
Click to expand...
Click to collapse
Yes, it does...
Tallahassee[CZ] said:
Yes, it does...
Click to expand...
Click to collapse
Your Windows/Mac/Linux version is too old to support MTP - you need to use PTP to transfer data.
NSDCars5 said:
Your Windows/Mac/Linux version is too old to support MTP - you need to use PTP to transfer data.
Click to expand...
Click to collapse
I have Win 7...Now I tried it on another laptop with Windows 7 a it couldn't install drivers, when I had MTP, PTP and nothing of these two options...
Tallahassee[CZ] said:
I have Win 7...Now I tried it on another laptop with Windows 7 a it couldn't install drivers, when I had MTP, PTP and nothing of these two options...
Click to expand...
Click to collapse
Um... wait. Windows 7?! You should have MTP support... try to plug it, unplug it immediately, then plug it in again. At least in 8.1, this forces Windows to redetect drivers.
NSDCars5 said:
Um... wait. Windows 7?! You should have MTP support... try to plug it, unplug it immediately, then plug it in again. At least in 8.1, this forces Windows to redetect drivers.
Click to expand...
Click to collapse
Nothing..My phone says "USB debugging connected", "Connected as a media device", but on the laptop isn't anything. Phone is just charging.. (Maybe I should say this → My brother tried to connect with his Xperia L, but on laptop wasn't anything, too...)
Tallahassee[CZ] said:
Nothing..My phone says "USB debugging connected", "Connected as a media device", but on the laptop isn't anything. Phone is just charging.. (Maybe I should say this → My brother tried to connect with his Xperia L, but on laptop wasn't anything, too...)
Click to expand...
Click to collapse
No... it can't be that easy...
Turn off USB debugging. That'll fix it.
NSDCars5 said:
No... it can't be that easy...
Turn off USB debugging. That'll fix it.
Click to expand...
Click to collapse
Still nothing It was installing drivers, but it failed.. I'll try it on another pc at friday..
Tallahassee[CZ] said:
Still nothing It was installing drivers, but it failed.. I'll try it on another pc at friday..
Click to expand...
Click to collapse
Am facing the same problem. Using Remote Manager of ES FIle Explorer to transfer files
Weird Network and battery bug with Tamsui CM11 Nanhu
I have a Sony Xperia E Single Sim. I am using the latest build from this thread. .
Apart from known issues, I have a strange problem. After using my phone for few days, the network connectivity stops and battery stops charging.
This has happened twice in last 1 week. I had to flash the JB ROM ftf again using the flash tool and then push the kernel and the CM11 again to get everything working again.
I am using "batteryfix.img" kernel.
arunudayan said:
I have a Sony Xperia E Single Sim. I am using the latest build from this thread. .
Apart from known issues, I have a strange problem. After using my phone for few days, the network connectivity stops and battery stops charging.
This has happened twice in last 1 week. I had to flash the JB ROM ftf again using the flash tool and then push the kernel and the CM11 again to get everything working again.
I am using "batteryfix.img" kernel.
Click to expand...
Click to collapse
Don't use the battery fix kernel - it's old. Just flash the ROM and use the boot.img inside it as the kernel.
Thank you so much for quick reply,
I flashed the batteryfix kernel using flash tool and then flashed the cm11 rom zip. Does that mean batteryfix was overwritten? or should I extract the boot.img and flash using flash tool again?
Hi I bought on ebay android tv box called Emish X700. Once i went for holiday and disconnected TV box from power outlet. After 2 weeks i came back home and when i turned it on TV box get stucked with picture of dead android without any option. I tried to do reset with toothpick for 10 sec in hole but with no change. when i googled a bit i found tools and firmware which helped me to restore this TV box to factory state and to be able to use it again. That's why i'd like to share it with users with same or similar problem.
Firmware + Flash tools + Drivers
Steps.
1. download attached files
2. unpack it
3. follow instructions from document in "X700 upgrade" folder
4. in case your PC can't detect your device use "Android Tool" flasher with firmware from "X700 upgrade" folder
5. after successful flashing device will reboot and will be booting for about 15 mins, so be patient
Where can I find Android Tool?
I did the step but in the program for firmware update the label does not become Green, so can't detect the device
Android tool is possible to download from link in 1st post. to get green status in program you have to plug usb cable connected already to your computer to your box with pressed resset button for abbout 5 secs.
I did for 10 seconds but nothing happens
Edit: it work, thank you very much for the guide!!
need you help
Leoxur said:
I did for 10 seconds but nothing happens
Edit: it work, thank you very much for the guide!!
Click to expand...
Click to collapse
I have the same problem, PC does not recognize the device.
I downloaded both folders for update.
Can you pls explain how to do it .
Thanks
mathuzalem said:
I have the same problem, PC does not recognize the device.
I downloaded both folders for update.
Can you pls explain how to do it .
Thanks
Click to expand...
Click to collapse
You have to use the tool for flash, not the program where the label should become green.
hello I have a box Emish x700 I can not have the update I have a USB transfer cable to connect two pc via usb but I do not have a green box in your software and it does not see my device on both thank you flash software
kevintrophy said:
hello I have a box Emish x700 I can not have the update I have a USB transfer cable to connect two pc via usb but I do not have a green box in your software and it does not see my device on both thank you flash software
Click to expand...
Click to collapse
Read my previous post!!
I get the error IDB failed in android tools, what can I do?
Thanks for this! I've been searching everywhere.
Device not recognized using the tools.
I have an Emish 700 android box. Works great WHEN it's working.What I mean is that now and again the red light simply won't click on to blue? I've tried switching it off and on and disconnecting it, reconnecting it... over and over again. After a day or so, all of a sudden, poof it comes on blue when connected. I'm ready to throw it out and buy something new. I tried the tools above, but my computer won't recognize the device? Does it need to be plugged in and turned on showing the blue light to work? Thanks!
Thanks for the software and drivers, my device now is alive again.
for those who don't work properly the reset button, I was in the same situation, searching on google reset for RK3128 devices, I find a solution, do a short circuit between 8-9 Pin on NAND chip with the USB connected.
Install the drivers attached at the link from djmaj0, flash the update image with Android Tools, and now working perfectly.
PD: i flashed with Win10 x64 and no problems, don't need W7 or W8
Thanks again djmaj0!
After flash
After the flash, is the Android still 4.4.1? or updated to 5.0 or higher?
I have emish x700. However unable to identify the toothpick hole as no click on/off apparent. Im assuming the hole on back between the usb ports. Can you confirm this or where it is. My device is frozen on the emish screen and will not proceed further. Thanks
Icarium20 said:
I have emish x700. However unable to identify the toothpick hole as no click on/off apparent. Im assuming the hole on back between the usb ports. Can you confirm this or where it is. My device is frozen on the emish screen and will not proceed further. Thanks
Click to expand...
Click to collapse
Yes you're right. The reset button is hidden in hole between 2 USB ports.
buytick said:
After the flash, is the Android still 4.4.1? or updated to 5.0 or higher?
Click to expand...
Click to collapse
Hi. After flashing kitkat will remain as the rom is almost same as original. Unfortunately its not pre-rooted, but i have done it with kingroot app after flashing.
djmaj0 said:
Yes you're right. The reset button is hidden in hole between 2 USB ports.
Click to expand...
Click to collapse
.
Thanks Djamjo
On my device unable to feel any pin through that hole. Saw posts elsewhere that you can use the on/off switch and volume control. Do you / any one know about this, also hole underneath the box whick on left out of line to other holes??.
Have downloaded the files. Can you confirm unpacking is same as extracting or unzipping ?. And as havent got to instructions yet do I need to copy the files to a usb or do everything from the laptop.
What is a short circuit between 8/9 pins on nand chip as advised above, and roughly how one would one do it.?
Sorry this is all a learning curve, hence delay. Thanks
For flashing firmware is required the DC-IN 5V to be connected?
So I found out that we have to connect the box with USB3. But in the flash process I get the errore Download IDB Fail. Anyone had this?
I know it's an old post, I successfully upgraded my emish x700 who had power on issues, now I see two types of memory partitions, phone about 1GB and internal_sd about 6GB. Why? Before upgrade I remember I had only one memory (think so) and I didn't have full memory issues when installing new apps. Who can help me?