Database Info

[Fix] Battery 0% fix [fix]

maby this works :
1.go to CWM (without charger)
let drain your battery
when your mobile is out of battery try to get him back on Cwm
3. And wait again when it gets off.
4.
when he is complete out of battery plug in the wall.
5.
then try to get your phone on in CWM
restore rom stock .................
5. maby your phone shutdown don't worry...
6. wait and get your phone on
do another rom restore
with all fixes and wipes
when you done start up phone and your ready to charge wait to 100% then its fix
by my is it working
Stock gb rom
Root
Cwm
Sorry for my english
Damage on your phone is not my thing
Not responsible of any damage
hope it works
Sent from my LG-P920 using XDA App

does it work for you ? what rom did you restore ?

my english is poor too.... and i don't understand anything...
can someone test it and explain??

It works for me wait a second i made a new version
Sent from my LG-P920 using XDA App

Okeej the edit is online hope its work for you too guys ..
Sent from my LG-P920 using XDA App

what do you mean ''
6. wait and get your phone on
do another rom restore
with all fixes and wipes
''
what fixes did you did after stock restore ??

First restore than your wipe everything .. than restore again
Sent from my LG-P920 using XDA App

didnt work. thanks anyways

Okeej your welcome iam sorry
Sent from my LG-P920 using XDA App

have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem

llcoolr said:
have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem
Click to expand...
Click to collapse
I found something frome paultje162
First download Thaiz O3D Stock 2.7.1
And make sure you are rooted and have CWM
let it on the charger for about 2 hours.
go into CWM
Wipe data
Wipe cache
Advanced settings:
wipe battery stats
wipe dalvik
go back
Mounts and Storage:
format system
go back
Install zip from sdcard
Choose zip
Flash thaiz O3d 2.7.1
reboot
wipe battery stats again
flash thaiz O3d 2.7.1
and reboot
now let it sit on the charger for about 24 hours. after that. you will see you magically have 30% battery.
unplug it. plug it. and it charges fast again
........
Thats a post of him hope it works
Sent from my LG-P920 using XDA

It worked for me. so it should do the trick.
and if it doesnt.
you can put your phone into download mode to restore it to stock.
just unplug battery. hold power and vol up
put in usb cord
put in battery
and let LG mobile update restore it.
remember, you need to take your own KDZ and flash it manually.
like you always restore your phone.
if i'm not wrong it shouldnt ask for charging your battery first.

So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.

everbret said:
So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.
Click to expand...
Click to collapse
HEH HEH !!!
Now we have a solution!!
try at your own risk!!
schubeir

[Q] Low battery voltage message in bootloader

Hey there,
-i have a "Low battery voltage , please change battery" message in bootloader .... (battery is 15 %)
-it happened suddenly after i did full wipe and formated all partitions and installed bruce's cm10 and gaps.(not my first time installing cm10)
-there is no strange behavior so far .. as it started to show just now..
-Right now i'm charging the battery.(UPDATE: After full charge ...the message no longer appear)
-Should i worry about the battery or not ,,, and how i make sure the battery is fine (App or something) ?????

Anyone
Anyone can help me in this matter ?!.

U dnt hve worry whn the better charge is less our bootloader gives that error it's common ntng to worry abt it alls well with battery
hit thanks if I hve hlped you
sent from HTC sensation using xda premium

Proximity issue and Battery stuck at 99%

Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...

Ak****banta said:
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...
Click to expand...
Click to collapse
Thank you for your response.
Regarding battery calibration I already tried but it says calibrate battery at 100% which is not possible because the battery stucks at 99% and does not proceed further.

Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

pcoruganti said:
Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.

Nutankumar said:
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me

Padmanappa said:
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me
Click to expand...
Click to collapse
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..

Jazzy_1 said:
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..
Click to expand...
Click to collapse
Thanks ..will try and let u know

Nutankumar said:
Thanks ..will try and let u know
Click to expand...
Click to collapse
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help

Canvas 2 Battery stuck at 99%.. :/
Nutankumar said:
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help
Click to expand...
Click to collapse
hey nutankumar..
i am also having the same issue.. but I didn't change the ROM though.. my canvas 2 is just 4 days old.. but i am facing battery issue... while charging its stuck at 99%.. if i switch it off then it shows 100%.. but after switching on.. it shows again 99%... i am seriously troubles..
please help me out.....! !anyone ??? please...

battery percentage not accurate on mytouch 4g slide cm9.1

battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help

Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.

thanks please is there any other option?

Use Battery Monitor Widget. Put the widget on your home screen, monitor your battery at all times, gather enough data, and then calibrate it.
If that still does not solve the problem then... wipe cache, dalvik, flash a new kernel.
If that's no good either, then switch to another ROM.
If you still cannot see light at the end of the tunnel, then... buy a new battery.
If, even then, life still betrays you... then... thoroughly mix 2.34 grams of sugar and 5.09 grams of powdered gold in 155.71 grams of warm distilled water. Drink the mixture and hopefully, your life will change for the better.
I've got your back. :fingers-crossed:

thanks for getting back at me....my battery works great on the stock rom when i tried switching back but its just malfunction on cm9 and cm10 as well...i.e battery percentage not accurate...well,i will give it a try and please how do i flash a new kernel

Flash WildKernel Reloaded on either CM9 or CM10.
1. Download the zip file and copy it to your phone's SD card.
2. Boot your phone in Recovery. Wipe cache and dalvik cache.
3. Flash/Install the zip file.
4. Reboot your phone.
5. Empty the battery, charge to 100%, wipe batterystats, unplug charger.
That should do the trick. But if it still fails, try flashing a different ROM. AOKP, for instance.

semiworld1 said:
battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help
Click to expand...
Click to collapse
This is something I've seen this device struggle with foor over a year. HTC failed this device and community.
abe5 said:
Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.
Click to expand...
Click to collapse
Batterystats.bin is automatically wiped when the battery charge. So doing all that crazy calibration is honestly a waste of time.
Sent from my Nexus 4 using xda-developers app

@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging

semiworld1 said:
@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging
Click to expand...
Click to collapse
I had to buy extra batteries if I wanted to stay on the bleeding edge of development.
For some reason CM9 was the same way and it took ages to fix. Its just something your going to have to compensate for if you plan on staying with the device.
Sent from my Nexus 4 using xda-developers app

same thing happen to my phone, install a new kernel, charge it full then calibrate the battery work for me

Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app

semiworld1 said:
Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app
Click to expand...
Click to collapse
Download kernel of choice...make sure your s-off then wipe cache and dalvik then flash in recovery or...if your s-on download kernel of choice. Flash it in recovery (for modules to be flashed) then boot into boot loader and run put the boot.img in your SDK/fastboot dir and run fastboot flash boot boot.img and reboot.
Sent from my Nexus 4 using Tapatalk 2

Le 1s Charging issue

Hello..
After charging my le 1s, the battery percentage remains the same even though battery is discharging and suddenly it is switching off when charge completely discharges but we dont know when the battery is drained since the percentage is not changing. And also the notification led light(orange colour) keeps on blinking continuously even though it is not connected to power source. The phone is taking so long to charge up and also it is discharging very fast.
I have tried replacing battery to new one and did factory reset also. even though the issue is not resolved. Please help me
Thanks

Try flashing stock rom through sptool

santoshhh000 said:
Try flashing stock rom through sptool
Click to expand...
Click to collapse
I have already flashed with twrp

Hemsmart said:
I have already flashed with twrp
Click to expand...
Click to collapse
I said sptool not twrp...

santoshhh000 said:
I said sptool not twrp...
Click to expand...
Click to collapse
I did flash with sptool. but still the issue is not resolved

Hemsmart said:
I did flash with sptool. but still the issue is not resolved
Click to expand...
Click to collapse
Seems hardware then ...go to local shop

Letv 1s charging issue
Temporary not but 70% solve battery charging no wait to 8 Hours ...fast mode must working see..
#Subscribe channel#