Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...
Ak****banta said:
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...
Click to expand...
Click to collapse
Thank you for your response.
Regarding battery calibration I already tried but it says calibrate battery at 100% which is not possible because the battery stucks at 99% and does not proceed further.
Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
pcoruganti said:
Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.
Nutankumar said:
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.
Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.
Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me
Padmanappa said:
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me
Click to expand...
Click to collapse
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..
Jazzy_1 said:
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..
Click to expand...
Click to collapse
Thanks ..will try and let u know
Nutankumar said:
Thanks ..will try and let u know
Click to expand...
Click to collapse
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help
Canvas 2 Battery stuck at 99%.. :/
Nutankumar said:
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help
Click to expand...
Click to collapse
hey nutankumar..
i am also having the same issue.. but I didn't change the ROM though.. my canvas 2 is just 4 days old.. but i am facing battery issue... while charging its stuck at 99%.. if i switch it off then it shows 100%.. but after switching on.. it shows again 99%... i am seriously troubles..
please help me out.....! !anyone ??? please...
Related
hello goodevening . i just want to share this ..
im experiencing a battery bug . im using fallout rom v5 w/ htc dev unlocked and 4ext recovery ..
im charging my phone thru my laptop via usb cable . i saw the battery percent and it is 60 . and then i try to reboot my phone then after rebooting i saw my battery percent is 100% . is it a bug ? how can i fix this . and im using 600max and 250min on my cpu freq and smartassv2 gov . i leave my phone 100% then when i check it again it is 80% im not using it ..
how can i fix this ? anyone experiencing this too ?
2easy4you said:
hello goodevening . i just want to share this ..
im experiencing a battery bug . im using fallout rom v5 w/ htc dev unlocked and 4ext recovery ..
im charging my phone thru my laptop via usb cable . i saw the battery percent and it is 60 . and then i try to reboot my phone then after rebooting i saw my battery percent is 100% . is it a bug ? how can i fix this . and im using 600max and 250min on my cpu freq and smartassv2 gov . i leave my phone 100% then when i check it again it is 80% im not using it ..
how can i fix this ? anyone experiencing this too ?
Click to expand...
Click to collapse
try calibrate battery....there's an app for that....once completed check the voltage...if fully charge should be around 4216mV....then restart the phone....wait until green light....see voltage....only after it show voltage above 4200 hit the calibrate button....works for me....
nazri5363 said:
try calibrate battery....there's an app for that....once completed check the voltage...if fully charge should be around 4216mV....then restart the phone....wait until green light....see voltage....only after it show voltage above 4200 hit the calibrate button....works for me....
Click to expand...
Click to collapse
okay sir ill try this
Hi All,
There is No-one Noob, all are the same. Some are Developer & Porters and Others are Members...
For Those Who are Just "Flashoholic" and are Flashing ROMs and Mods, Battery Calibration is Must...
We have Seen Wipe Battery Stats in CWM Recovery Advanced Options but never tried it. Now its time to use it.
Lets Start With the Calibration, but Please Please make Sure to Charge your Battery to 100% or else it will Show wrong Parameters.
Follow the Steps mentioned below....:-
Make sure battery is at 100% and then Leave it on charge for 15 minutes.
Without Disconnecting the Charger just boot in to Recovery(Dont dis-connect the charger)
Then go to advanced in then wipe battery status.
Then reboot to system.
It will show you somewhere 97%.
Let it get full charged again...
You are Done Now....
:good::good::good:
Hit Thanks instead of Saying it....
Disclaimer:- It Doesn't harm the Phone or other thing in anyway but if you have done anything wrong Then The Forum / Members / Me or Others are neither Responsible nor you can blame for It.
So do this with your own Responsibility.
BOND1987 said:
Hi All,
There is No-one Noob, all are the same. Some are Developer & Porters and Others are Members...
For Those Who are Just "Flashoholic" and are Flashing ROMs and Mods, Battery Calibration is Must...
We have Seen Wipe Battery Stats in CWM Recovery Advanced Options but never tried it. Now its time to use it.
Lets Start With the Calibration, but Please Please make Sure to Charge your Battery to 100% or else it will Show wrong Parameters.
Follow the Steps mentioned below....:-
Make sure battery is at 100% and then Leave it on charge for 15 minutes.
Without Disconnecting the Charger just boot in to Recovery(Dont dis-connect the charger)
Then go to advanced in then wipe battery status.
Then reboot to system.
It will show you somewhere 97%.
Let it get full charged again...
You are Done Now....
:good::good::good:
Hit Thanks instead of Saying it....
Disclaimer:- It Doesn't harm the Phone or other thing in anyway but if you have done anything wrong Then The Forum / Members / Me or Others are neither Responsible nor you can blame for It.
So do this with your own Responsibility.
Click to expand...
Click to collapse
Hello bro, what to do if the phone battery is stuck at 99%. I tried the above method but battery the problem persist.
Please help me to reach my battery 100%
Nutankumar said:
Hello bro, what to do if the phone battery is stuck at 99%. I tried the above method but battery the problem persist.
Please help me to reach my battery 100%
Click to expand...
Click to collapse
Bro,
S.off your phone take the battery out and then re insert the battery and s.on it. It will show you a 99% battery or less than that let it get charged then try this.
I was suggested this by another user here. It also does same. CWM or this APP, both deletes "batterystats.bin" file and after immediate reboot the counter starts fresh with actual value. https://play.google.com/store/apps/details?id=com.nema.batterycalibration&hl=en Give it a try. No need to go in recovery mode with this app.
thank you...
Will definitely try this one... Thank you...
Bro what else if we dont have wipe battery stats option in advance?
Our latest cwm recovery doesnt have this option.. the old one has.. but developer says its useless as it wont work.. so he remove it in latest version.. m talking about mmx A110 device.
Sent from my MICROMAX A110 using xda premium
Wipe battery is useless
on every restart phone automatically wipe it
so this option remove from recovery..
just charge your mob 100%
restart without remove charger
check charging is 100% if not then charge it until 100% (some time take 3-4 hrs.)
100% done... remove charger.. use it until 0% don't charging until 0%
try to restart 1-2 time (for empty battery)
then again charge until 100% without remove charger
you do this any time when you feel your battery is need to calibrate..
I flashed the JB ROM on my Tab 7 Plus. After the "succeess" of the flashing as said by Odin v1.85, I tried to turn on the device, but it didn't. I tried to access download mode or recovery mode but it didn't work either. I tried to hold the volume down button and connect the cable to the tablet. That opened the download mode but the screen was "flashing". The rate at which the screen "flashes" keeps increasing until it becomes very fast and the device turns off. I tried to flash a ROM, but Unfortunately it turns off fast that there will be no time for the flashing process to continue.
Any idea what should I do?
what model device do you have and what exact ROM did you flash? and which ROM did you have before flashing.
If you say I dont know to any of these.....
Reply
chrisrotolo said:
what model device do you have and what exact ROM did you flash? and which ROM did you have before flashing.
If you say I dont know to any of these.....
Click to expand...
Click to collapse
My Device is GT-P6200 and I got the GT-P6200 JB ROM for it.
______________
I left my device to charge all night. When I woke up I tried to see if the 'flashing' of the screen still occurs, but it didn't happen. I think I can flash a ROM now
I tried to flash the ROM again and it worked, luckily it was not a hard brick. Problem solved. It is weird that the flashing didn't succeed the previous time. Maybe the battery level was low (about 20%) when I flashed the ROM the previous time, can this be the problem?
yes, also a faulty or non-OEM cable would be the culprit.
SudoHalt said:
I tried to flash the ROM again and it worked, luckily it was not a hard brick. Problem solved. It is weird that the flashing didn't succeed the previous time. Maybe the battery level was low (about 20%) when I flashed the ROM the previous time, can this be the problem?
Click to expand...
Click to collapse
yess. flashing(blinking) screen is how download mode tells you that your battery is low. probably less than 10% since it even turned off by itself.
This Happend To me and I got it BACK
Hello... I totally understand your frustration... This exact same thing happened to me after my battery went dead just after I installed JB...
well here is the kick and it's kind of tricky...
If you want you can call me and I can tell you the instructions, it's complicated but if you follow the steps it will work...
I can also take the time to write it down, but i'm bad a typing.
let me know if you are interested...
Sorry for the late reply. It was fixed after less than a day from starting this thread.
Sent from my GT-I9001 using xda app-developers app
Hello guys, I have the next problem, the phone are stucked charging and never have more than 0% of batery, I'm triying tu put it in recovery, but i can't, if i conect it, to a pc, only the white led turn on, please help me
gnolasco said:
Hello guys, I have the next problem, the phone are stucked charging and never have more than 0% of batery, I'm triying tu put it in recovery, but i can't, if i conect it, to a pc, only the white led turn on, please help me
Click to expand...
Click to collapse
What was the condition of the phone prior to this problem? Was it rooted? Did it have a custom ROM, etc? Were you experiencing some sort of problem with it before the battery ran down? A little background info on the problem would be helpful for diagnosing your current situation.
1BadWolf said:
What was the condition of the phone prior to this problem? Was it rooted? Did it have a custom ROM, etc? Were you experiencing some sort of problem with it before the battery ran down? A little background info on the problem would be helpful for diagnosing your current situation.
Click to expand...
Click to collapse
I'm having the same problem!!
My phone's been rooted and I was using Paranoid Android 4 beta 6 on system 1..
Hello..
After charging my le 1s, the battery percentage remains the same even though battery is discharging and suddenly it is switching off when charge completely discharges but we dont know when the battery is drained since the percentage is not changing. And also the notification led light(orange colour) keeps on blinking continuously even though it is not connected to power source. The phone is taking so long to charge up and also it is discharging very fast.
I have tried replacing battery to new one and did factory reset also. even though the issue is not resolved. Please help me
Thanks
Try flashing stock rom through sptool
santoshhh000 said:
Try flashing stock rom through sptool
Click to expand...
Click to collapse
I have already flashed with twrp
Hemsmart said:
I have already flashed with twrp
Click to expand...
Click to collapse
I said sptool not twrp...
santoshhh000 said:
I said sptool not twrp...
Click to expand...
Click to collapse
I did flash with sptool. but still the issue is not resolved
Hemsmart said:
I did flash with sptool. but still the issue is not resolved
Click to expand...
Click to collapse
Seems hardware then ...go to local shop
Letv 1s charging issue
Temporary not but 70% solve battery charging no wait to 8 Hours ...fast mode must working see..
#Subscribe channel#