[Q] Help installing a rom - Eee Pad Transformer Q&A, Help & Troubleshooting

I have clockwordmod installed on my tf101, however it was the internal sdcard version. I cant boot into Android, as it hangs on startup. This shouldnt be a problem because i should just be able to slide in a microsd and flash a rom as usual right? Well, since the internal cwm is installed, i cant use an internal sdcard. So my next thought was to reformat /system then mount usb device through cwm to transfer a rom over to the internal storage. However, i think something is wrong with my cable. I only have one so i cant test another unless i buy another. Soo.. i have my tablet that wont boot into android, but recovery works fine, and i cant think of a way to be able to flash a new rom so the tablet is usable. Im going to be up trying to remedy the situation for a while, but if anybody has any input and a solution i would greatly appreciate any help.
Cheers!

Try installing TWRP the manual way
Teamw.in/project/twrp2/109

Im assuming you are reffering to the ADB/Terminal method? If so, I cant get that to work because I have no way of transferring the blob onto the internal sdcard.

adb push somerom.zip /sdcard
If this does not work, I'm lost

huh??
if i remember correctly, even when i'm in cwm recovery, if i plug the usb cable into my windows laptop....it picks up the internal storage of the tf101. lemme know if i'm wrong. been a few days since i was in recovery, but i'm almost sure of it.

That should work, but my cable isn't working for some reason. My computer doesn't even detect apx mode, or else I would have just used NVflash. I will definitely try it though, thank you.

All is good now. Ordered a new cable and used easyflasher to reinstall clockworkmod recovery.

Related

[Q] phone is dead , can only enter in cloxkworkmod recovery

Hi all expert,
my nexus s is unrooted. i installed ADB in my win7. I did wipe out all data/sd card without any back up. so my phone cant go anywhere ,except into clockworkmod recover. when I try to boot, error say it cant find any image. I cant instal image if i cant get in to the phone and set the usb connection. So my question is how to force install image into the phone without enablimg the usb connection? Please help. thank you
rongsokan said:
Hi all expert,
my nexus s is unrooted. i installed ADB in my win7. I did wipe out all data/sd card without any back up. so my phone cant go anywhere ,except into clockworkmod recover. when I try to boot, error say it cant find any image. I cant instal image if i cant get in to the phone and set the usb connection. So my question is how to force install image into the phone without enablimg the usb connection? Please help. thank you
Click to expand...
Click to collapse
you have clockwork recovery right? theres an usb storage option in the recovery itself. connect it to your computer, turn on the usb storage. download a rom(and gapps) to your computer, copy/paste into the device, turn off usb storage, then flash the files in clockwork recovery. then reboot.
After you do what he said, either do alot of research about rooting, and flashing roms and kernels or sell your phone.
Sent from my Nexus S 4G using xda premium
simms22 said:
you have clockwork recovery right? theres an usb storage option in the recovery itself. connect it to your computer, turn on the usb storage. download a rom(and gapps) to your computer, copy/paste into the device, turn off usb storage, then flash the files in clockwork recovery. then reboot.
Click to expand...
Click to collapse
So I did follow your instruction. I went storage->mount usb storage->unmount(I can only select this, I try reboot the phone still give me this only option). so I also tried mount sdcard, mount system, all that.
Finlally, I got removable disk on my computer, but it show 0 byte, when i click on it, it says plz insert a disk into removeable disk. so i went click
property->hardwares->highlight Android UMS composite usb device(type: disk drive) and property. then I select driver-> and there is driver details, update driver. So do I update this driver? If so which driver?
I try to format it, it gives errorlz insert a disk into removeable disk
I have clcokworkmod recovery v5.0.2.0 and it is unrooted. thank you for the help!
I also install PDAnet into my computer but it keep saying connecting to your phone..... I try using different usb port and no luck.
rongsokan said:
So I did follow your instruction. I went storage->mount usb storage->unmount(I can only select this, I try reboot the phone still give me this only option). so I also tried mount sdcard, mount system, all that.
Finlally, I got removable disk on my computer, but it show 0 byte, when i click on it, it says plz insert a disk into removeable disk. so i went click
property->hardwares->highlight Android UMS composite usb device(type: disk drive) and property. then I select driver-> and there is driver details, update driver. So do I update this driver? If so which driver?
I try to format it, it gives errorlz insert a disk into removeable disk
I have clcokworkmod recovery v5.0.2.0 and it is unrooted. thank you for the help!
Click to expand...
Click to collapse
By the way you just click on mount usb storage and LEAVE IT there for a few seconds. It takes a little time for the computer to recognize it usually. You only click unmount when your done...
ok i got it. now i could put files into the sd storage. Do you guys know what i need to put for stock, out-of box image?
I need to reset this to factory setting and root the phone.
I did some serach but the file needed to download is not working anymore. anyone know? thank you
rongsokan said:
ok i got it. now i could put files into the sd storage. Do you guys know what i need to put for stock, out-of box image?
I need to reset this to factory setting and root the phone.
I did some serach but the file needed to download is not working anymore. anyone know? thank you
Click to expand...
Click to collapse
Here is a thought... read some more before messing with your phone instead of asking questions which have been already answered many times.
Sent from my Nexus S 4G
I have been reading reading again... the whole day today. I just dont want to install the wrong drive or file. for nexus s tehre is so many version. the one i got for bootloader is i9020xxka3
for baseband version- i9020xxkf1
fastboot mode stil showing- NO BOOT OR RECOVERY IMG
I give up may be I am too idiot.
obsanity said:
Here is a thought... read some more before messing with your phone instead of asking questions which have been already answered many times.
Sent from my Nexus S 4G
Click to expand...
Click to collapse
Coming from someone that also finds conditions & situations similar but not precisely like my own in the multitude of answered threads..... Some of us can get to a certain point but get stuck, and since these are devices we need to work we want to be sure we don't do something to turn an expensive device into a pretty paperweight.
You learned by fiddling and asking questions did you not? If you are sick of the same old question don't answer the thread.
Sorry, I have no great advice for the OP, you aren't an idiot you are uninformed [just yet] of the proper fix for your problem. I'm still trying to fix something myself so the couple of snipes hit a nerve this morning.
I read read read and read again, its been almost a week. Good god I cant get the solution or may be i dont undderstand it. I try go to cmd prompt and "type fast boot lock" to get it rooted. No luck
my phone situation:
No back up or recovery ( I wipe all sd/back up/system)
fasboot mode-no boot or recovery img
Lock state- unlocked
can only go into clockwork mod
my Goal: lock the phone and flash it to factory stock setting.
I just own nexus s for 7 days and did a ton of research coz stuck at google X animation keep loading and install MIUI and unroot the phone. Soooo stupid of me now that I broke the warranty. Softkeys is no even working!!!!!! when i suscessfully get into the phone.
is there a proper step by step to do this? is there any expert here that can point to the right direction? I am checking this post every 5 minutes
Clearly this is too much phone for you.
Sent from my Nexus S 4G using xda premium
Ok I'll try to help you.
According to what I gather from your posts, you've been successful in unlocking the bootloader and managed to flash CWM recovery, that's a good first step.
Your goal is still unclear. Ok, you want to re-lock the phone and 'restore to factory stock settings'? Does that mean you want a stock firmware on your phone or would you settle for a custom firmware, like Cyanogenmod or MIUI? Either way, visit the Nexus S Development forum, there's a full list of firmwares , just pick whichever you want and download that.
Here's a fantastic topic with a list of all firmwares and also plenty of links to guides:
http://forum.xda-developers.com/showthread.php?t=1067813
Enter CWM recovery mode (VolumeUP + Power button and select Recovery in the Bootloader options).
Go to mounts and storage. We want to mount or SDcard so we can transfer files from the PC to the SDcard as a USB mass storage device. Make sure the phone is connected through USB.
So, select the option: - mount USB Storage. Wait for a few seconds, it takes a while to get initialized by the PC.
Once it's recognized by your PC, copy the downloaded firmware to the SDcard. It should have a .zip extension and be approximately 100mb (of course depending on which flavour you picked, but that's somewhat the standard).
Once it's copied, go back in the CWM main menu and select "Install zip from sdcard". If you want, you can first wipe your cache and Dalvik cache, but since you clearly wiped everything already this shouldn't be necessary, so anyway; install zip from sdcard and select your firmware.zip file. Select it and press the power button to execute the install.
It will install the firmware plus the kernel that it's packed with, all this should be enough to get your phone booted. So reboot your phone and it should work.
Once you've successfully booted into your device, you can do whatever you like. If you want to lock the bootloader again though, you'll need to reverse the steps you took to unlock it. This is through ADB and Fastboot. But this topic explains it step by step and in detail, all credits to the OP: (http://forum.xda-developers.com/showthread.php?t=875630).
If the bootloader is locked again, you shouldn't have any issues with the warranty. It's a Nexus...
Some of your posts were a bit contradictory so I can only assume what your current status is with your phone.
Maybe you should also understand what everything means and does instead of blindy formatting disks and running random commands. Learn what ADB is, learn what Fastboot does. See how the bootloader works and where the recovery comes in, read up on the different firmwares and what kernels do. It might seem like a big investment of your time, but it will help you understand the boot process of the Nexus.
Good luck,
Greetz

Big Problems, possible brick?

Ok so i had CM10 Nightly installed.
I tried to install a custom kernal, but i would not leave the asus screen.
When i try to load fast boot, it states "starting fastboot usb download protocol" but nothing happens
ADB wont see it.
I can still access clockwork but i cant mount a sd card.
Did i brick, or can i still save it?
Iv had same problem with fastboot as u had. Be sure that you have the correct drivers, plug in ur tablet on the computer while in while the tablet is in the bootloader. Then choose the USB icon on the tablet. Your computer should automaticly download the right drivers, but in my case it took quiet a while before windows update found them etc. That fixed my fastboot problem.
More on topic, ur tablet is not bricked as you can get into CWM without problems. As im not a pro im not sure how to exactly fix this issue, but if u have ur ROM on ur device, you could reflash it and you will be back in business
I have this problem on my tablet when I install Clemsyn's kernel. When I switch to Unter's I have no issues. Try using TWRP instead of CWM also. That might help some of the problems.

Can't Mount SD Card

I was running CM10 on a rooted TFT101. I was having some WiFI connectivity issues so I decided I would try out a new rom. I used Titamium Backup and backed up all my needed files to my Mico SD card. Once backed up, I rebooted into CWM v6.0.1.3. I went to do a factory reset prior to flashing the new rom. The tablet just froze. I rebooted the tablet back into CWM. I tried to again do a factory reset and again the tablet just froze. I tried to boot back into CM10 and I just sits and spins and never actually boots into the OS. I decided that I would just go ahead and just flash the new rom and do a factory reset after the fact. I placed the new rom on the micro sd card and booted back into CWM. I attempted to install zip from SD card and now I get e:can't mount /sdcard/. I have tried 3 different micro sd cards and nothing. I have formatted each to fat32 and not one of them is recognized. All 3 are recognized by windows.
Since I can't boot into the OS...and I can't load a new rom....I am dead in the water. Any help would be greatly appreciated.
Thank you in advance.
If you can get it to that endless boot logo and connect it through USB, ADB (info - download) should be able to access whatever's left on your device assuming it gets far enough in the boot process. If it does, you can adb pull the backups to your computer to save them.
That being said, Easy Flasher will help you get back to 100% unrooted stock and "unbrick" your device with a few clicks. Then you can start over with a new recovery and rom. But it will wipe your entire device clean, hence why I suggest you first check if you still have backups and if you do, pull them on your computer using adb.
I can't help with the CWM problem, I haven't used it in a long time.
Lethe6 said:
If you can get it to that endless boot logo and connect it through USB, ADB (info - download) should be able to access whatever's left on your device assuming it gets far enough in the boot process. If it does, you can adb pull the backups to your computer to save them.
That being said, Easy Flasher will help you get back to 100% unrooted stock and "unbrick" your device with a few clicks. Then you can start over with a new recovery and rom. But it will wipe your entire device clean, hence why I suggest you first check if you still have backups and if you do, pull them on your computer using adb.
I can't help with the CWM problem, I haven't used it in a long time.
Click to expand...
Click to collapse
Thank you Lethe6. I saw that option and wondered if that might help me. I will try it out today.
One quick question. If I flash back to stock I am guessing I will just need to reroot once I am able to boot it back up?
Thank you again for your assistance.
Yes exactly. Easy Flasher has a root option as well so it's fairly easy to get going with customizations after restoring to stock!
Lethe6 said:
Yes exactly. Easy Flasher has a root option as well so it's fairly easy to get going with customizations after restoring to stock!
Click to expand...
Click to collapse
Go figure. I went to fix the issue last night per your instructions and I was sitting at the Google login screen for the the new rom I loaded. What ever issue I was having corrected itself. That never happens. I guess I shouldn't complain =)
Thank you again for your assistance Lethe6!

[Q] Where to find ROM zip in TWRP?

Long time reader, first time poster, which just goes to show that the answers are usually there!
However this time I just cant find an answer and i've tried searching for similar posts but the search function is broken!
Never used TWRP before only CWM and this is my first time trying to flash my TF101 from stock having grown tired waiting for JB.
I'm trying to work out why i can't seem to see ANY files in TWRP 2.2.1.4 on my TF101. There are folders listed on the left for both internal and external SD but my external SD doesn't have any of those folders on it, yet they are still listed. Do the zip files for ROMS need to be in a specific folder for TWRP to see them?.
I did a full wipe ready for the new ROM but now cant find a ROM to flash so I'm stuck in TWRP!
any assistance greatly appreciated.
Sussed it....
Puzzled it out after a few minutes.......the files are in the sdc folder...not sdcard or sd-ext.......still don't understand why i couldn't see the backup that TWRP itself created though. Many thanks to Rayman FX for what looks to be an awesome ROM. Just gotta work out how to do this overclocking to 1.6ghz!:good :good:
oh dear
Flashed the wrongs gapps, wiped everything in TWRP and somehow wipe TWRP too.
I wanna cry. Back to square one.
Not sure how you wiped TWRP from TWRP, but boot to APX mode and use EasyFlasher to install TWRP again.
cheers for the reply
cheers for replying, i'm presently trying to do that but having issues getting my pc to recognise my tablet when i try and put it in apx mode......i dont get any chime or indication at all......
IT may not actually be in APX mode then. It's a little tricky sometimes since you have no way of knowing if it is. Try putting it in APX mode again (hold power for like 10 secs and start over when you're sure it's powered off). Also make sure you have the drivers installed (it should chime anyway though).

[Q] SD card won't mount in recovery

Hey guys, just need some help here...
My tablet works fine, downloads to the SD fine, it recognizes its there no problem. But, when I boot into CW Touch recovery, it suddenly can't mount the internal or external memory. Any chance on fixing this? It wasn't always this way either, I had it rooted at one point but something changed and now its not rooted and recovery doesn't work. I can get into fastboot no problem.
Any help would be much appreciated.Thanks!
What format is the card. I've noticed fat32 seems to work best.
murriano said:
Hey guys, just need some help here...
My tablet works fine, downloads to the SD fine, it recognizes its there no problem. But, when I boot into CW Touch recovery, it suddenly can't mount the internal or external memory. Any chance on fixing this? It wasn't always this way either, I had it rooted at one point but something changed and now its not rooted and recovery doesn't work. I can get into fastboot no problem.
Any help would be much appreciated.Thanks!
Click to expand...
Click to collapse
Give twrp a try for recovery? Mounts my 64gb card nicely.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Categories

Resources