My phone doesn't go to download mode and doesn't start flashing,plz help?
eternal.sumit said:
My phone doesn't go to download mode and doesn't start flashing,plz help?
Click to expand...
Click to collapse
Are you able to flash kdz roms using lg flash tool? If not what is the error your receiving?
eternal.sumit said:
My phone doesn't go to download mode and doesn't start flashing,plz help?
Click to expand...
Click to collapse
- - Now your phone is working or not ?? I mean is it bricked ??
-if bricked you need "omap4boot" to enter download mode .. see the ressurection guide in the general section .
http://forum.xda-developers.com/showthread.php?t=1942836
-if it is not bricked you do some thing wrong .
- - To enter download mode :-
-Remove every thing ...
-Now your phone in your hands without anything .
1- Hold vol+ and keep holding ..
2- Now you are holding vol+ ,,,, connect your phone with pc and keep holding ...
3- Now you are still holding and the phone is connected ,,, inseart the battery and keep holding vol+ for about 3 seconds .
That is all
Good Luck :good:
OS_Hacking said:
- - Now your phone is working or not ?? I mean is it bricked ??
-if bricked you need "omap4boot" to enter download mode .. see the ressurection guide in the general section .
http://forum.xda-developers.com/showthread.php?t=1942836
-if it is not bricked you do some thing wrong .
- - To enter download mode :-
-Remove every thing ...
-Now your phone in your hands without anything .
1- Hold vol+ and keep holding ..
2- Now you are holding vol+ ,,,, connect your phone with pc and keep holding ...
3- Now you are still holding and the phone is connected ,,, inseart the battery and keep holding vol+ for about 3 seconds .
That is all
Good Luck :good:
Click to expand...
Click to collapse
its not actually bricked but i wanted to flash V21D Baseband to get network signal on CM 10,and during flashing procedure it doesn't enters download mode.....thanx for your aid.
n3fta said:
Are you able to flash kdz roms using lg flash tool? If not what is the error your receiving?
Click to expand...
Click to collapse
its not actually bricked but i wanted to flash V21D Baseband to get network signal on CM 10,and during flashing procedure it doesn't enters download mode.
eternal.sumit said:
its not actually bricked but i wanted to flash V21D Baseband to get network signal on CM 10,and during flashing procedure it doesn't enters download mode.
Click to expand...
Click to collapse
If it boots it'll get in the download mode. You may not see it but it's there.
Just ready the flash tool and plug whatever rom or baseband you wanna flash then shut down the phone , plug out the battery but be ready to put it back in , hold down the volume + button , plug the usb cable while holding , you're going to hear windows connected and disconnected sounds in this order ;
1. Connected (This'll get you into the fastboot mode , We don't want that at the moment)
2. Disconnected
3. Connected again (You plug the battery in before it disconnects again)
The flash tool should take over and you can release the volume + button.
Related
Hey guys,
I tried to install TW4 but that didnt worked for me.
Now i only have a black sreen when the phone starts.
And i cant get Odin to work because i cant connect the phone to the pc with usb.. i only can get in boot mode.
Anyone know a soluction to my problem?
Can you get to Download mode...home+volumedown+power button combination??
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
DarkRaver84 said:
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
Click to expand...
Click to collapse
so if you can enter download mode there is no problem, just install new rom ...
when i try to install a new rom with odin it gives me a massege "connect a telephone" but it is connected through usb..
i got the ops file in odin and by "one package" i put the md5 file.
But then i get that massege "connect a telephone"
Try an other USB-port, make sure Kies is not running and use Odin 4.43.
i dont have kies on the computer and i use odin 4.43.
i tried another usb port but no changes..
DarkRaver84 said:
i dont have kies on the computer and i use odin 4.43.
Click to expand...
Click to collapse
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
reneph said:
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
Click to expand...
Click to collapse
Yes i have the standerd samsung mobile driver installed and it worked before i installed tw4 witch diddnt worked for me.
DarkRaver84 said:
Yes i have the standerd samsung mobile driver installed and it worked before
Click to expand...
Click to collapse
Yeah but such a problem seems to occur relative often.
I would try to reinstall drivers, maybe with the Kies-drivers or use another computer.
I have similar problem. There is the same symptoms.
I have try:
- other usb ports
- other drivers (original samsung / kies drivers)
- other pc
- kill kies processes
- misc roms
and.. nothing..
I cant get recovery mode.. There is ramdump mode instead of recovery :/
Actually my i9001 is bricked and I cant load any rom..
Maybe my sgs is locked by bootloader or something?
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
jbmc83 said:
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
Click to expand...
Click to collapse
At least your guide on how to get to recovery is a big fail. That works with I9000, not I9001. Vol + / Power, WHEN the samsung text appears, release both buttons. AND when the lights in the softkeys turn on, quickly tap MENU, that's how to boot to recovery mode
well sorry if i left that part out, i assumed he would know how to navigate the recovery mode once he actually got the button combo right. and the only fail here is ur rude attitude, deff. no need for that around here imho.
aside from that, all these instructions are correct.
cheers
Sent from my GT-I9001 using XDA App
I solved the problem.
Unfortunately not on my PC. My i9001 needed a box which I solved all mistakes.
Now I have Gingerbread with root
Unfortunately I still hav a problem with my PC which doesn't want connect with sgs.. :/
I will try trial and error method.
After flashing baseband, second time today, my phone go to emergency mode during flashing and after half hour and more nothing happend. Now, phone is always in emergency mode, and nothing i can to do. Backup i have, but LGMDP-v1.5 dont recognize phone and i dont can go to recovery mode. And KDZ Updater dont see phone.
Does for this phone has hope?
p.s. Sorry for my bad english.
Just don't mess with it now!! Just take it to service center they'll fix it!! If u try repairing it on ur now brick it totally!!! Just don't mess with it just take to service center!!!!!
Sent from my LG-P500 using xda app-developers app
Ok. Tnx ..
You can remove the battery IF YOU WERE FLASHING BASEBAND ONLY
then put battery back and press vol up + back + power and phone will go in emergency mode
disable all lg modems in device manager, then flash baseband again and it will work
I remove battery ~10 times, and phone always automatticly go in emergency mode when i back up battery, but device is not recognize by tool like a LGMDP-v1.5, lg studio kdz updater on computer.
1. remove battery
2. put battery back
3. press power button+ volume up button + back button together
4. keep buttons pressed and phone will go in emergency mode
5. now lgmdp will recognize device
@TheAndroidGeek
I do what you write to me, and lgmdp recongnize the phone but when i click connect button lgmdp is notifier with message 'Error! can't open serial port (rebot and reconnect).'
What next?
goran9888 said:
@TheAndroidGeek
I do what you write to me, and lgmdp recongnize the phone but when i click connect button lgmdp is notifier with message 'Error! can't open serial port (rebot and reconnect).'
What next?
Click to expand...
Click to collapse
Disable modem drivers (LG) in Device manager!
In Device Manager is disabled only LGE Virtual Modem because he is only there. But error is still there in lgmdp.
Hooo ...
I back phone in life with this tutorial: http://forum.xda-developers.com/showthread.php?t=1197111
Thanks to xzet2 for that tutorial.
Now, i installed this ROM: http://forum.xda-developers.com/showthread.php?t=1818219
But i dont have service again (no signal - baseband is unknown). With android 2.2.2. is all ok (have service, baseband v10e is show and all work ok) but i want ics.
I trie to flash baseband to P500-v20G but lgmdp dont see phone when this ics rom installed. When installed android 2.2.2 lgmdp see phone.
In Device manager LGE Virtual Modem is disabled.
What to do?
Does ok to install ROM with android 2.2.2 and then flash baseband on v20g version and then install ics, or what?
And again hoooo ...
I start phone in emergency mode, run lgmdp and flash baseband. That all work 10 seconds, and wala ... now i have new baseband and ics rom.
Thanks!
Emergency mode and only lg logo
Hi,
MY lg p500 suddenly stopped working. upon switching on it only shows LG logo... tried hard set button. but nothing worked. searched on google, find kdz, lgmdp, android adb ( fastboot mode) , LG Utils....i tried all the option but nothing seems to work....
i realised that my micro-sd got corrupted causing this problem then i changed my card and again tried but finding same situation.
1.=when i detach my usb and remove battery and again putting battery and pressing combination of " RETURN + VOL UP + POWER" my phone goes into EMERGENCY MODE.
2. when i put usb cable, its just shows lg logo, nothing else. on pressing HOME BUTTON , it shows
" FASTBOOT MODE STARTED
UDC_STARTED()
-- SUSPEND--
--RESET--
--PORTCHANGE--
--RESET--
--PORTCHANGE--
is there any hope to bring it into life ?????
Please help me
p.s :
1. KDZ UPDATE : I TRIED V20D.00.KDZ FILE . it show " upgrade error error code =6" .
( tried all three mode " DIAG, EMERGENCY, CS_EMERGENCY) but got same error for all the mode option.
2. lgmdp : upon connecting doesnt shows any thing in NV backup .
3. Android adb : on doing "fastboot erase recovery" it just keep on showing " waiting for device"....
4. LG utils : on selecting "I" option ( for extracting kdz ) the LG utils carshes.
is there any hope for my phone ????
thanks a lot, its works
Thanks a lot, it works perfect.
TheAndroidGeek said:
You can remove the battery IF YOU WERE FLASHING BASEBAND ONLY
then put battery back and press vol up + back + power and phone will go in emergency mode
disable all lg modems in device manager, then flash baseband again and it will work
Click to expand...
Click to collapse
I went to update my lg p-500h and it went into emergency mode anyway I can get my phone back up again
Hello everyone,
My phone is LG-SU760
My phone was having problems with finding the correct network, so I decided to flash V29B_00.kdz, I wiped phone and rebooted but after an hour of it booting it still did not work, it got stuck in a bootloop.
I removed the battery and started the phone holding volume up / camera / power on which this time send me into DOWNLOAD MODE.
I have no idea why that is there and I can't boot into fastboot any more.
I hope somebody can help me, Thanks,
tuvshinjargal said:
Hello everyone,
My phone is LG-SU760
My phone was having problems with finding the correct network, so I decided to flash V29B_00.kdz, I wiped phone and rebooted but after an hour of it booting it still did not work, it got stuck in a bootloop.
I removed the battery and started the phone holding volume up / camera / power on which this time send me into DOWNLOAD MODE.
I have no idea why that is there and I can't boot into fastboot any more.
I hope somebody can help me, Thanks,
Click to expand...
Click to collapse
-use Xbsall's resurrection guide to revive your phone if it doesn't boot
http://forum.xda-developers.com/showthread.php?t=1942836
-for getting network signal flash bernie's u-boot nad x-loader
http://forum.xda-developers.com/showthread.php?t=2037287
-to enter download mode while holding VOL UP and insert USB cable,to enter fastboot mode while holding VOL DOWN and insert USB cable
eternal.sumit said:
]
-for getting network signal flash bernie's u-boot nad x-loader
http://forum.xda-developers.com/showthread.php?t=2037287
Click to expand...
Click to collapse
Bernies files and also my rebooter utility are for P920 not SU760
Send from my NXE4+ P920.
run fastboot--> select ur device-->connect without battery--> connect the battery immediately not waiting for the whole things to complete...
if not worked let me know
I have a big problem with my Lg optimus 3d with Darkroom ICS.
After that i tried to install overclock with 4 keys fix from this thread http://forum.xda-developers.com/showthread.php?t=1982744
my phone wont boot up. Here is a link to show you the problem: http://www.youtube.com/watch?v=BfdHevSyR0c&feature=youtu.be
the last thing I do in the video is holding power+vol up+3D and then I get a error screen in Korean.
When i try to connect it to my computer it just wont stay connected. (The connect and disconnect sound beeps with around 3s between)
Do anyone have a suggestion on how to fix this?
Sincerely, Henrik
Try this:
-keep battery in
-hold vol+
-connect usb (hold vol+ 'till you enter download mode)
-flash ICS via LG FlashTool
oh and make sure you've installed the whole drivers.. (for omap4430 etc)
HenrikSwe said:
I have a big problem with my Lg optimus 3d with Darkroom ICS.
After that i tried to install overclock with 4 keys fix from this thread http://forum.xda-developers.com/showthread.php?t=1982744
my phone wont boot up. Here is a link to show you the problem: http://www.youtube.com/watch?v=BfdHevSyR0c&feature=youtu.be
the last thing I do in the video is holding power+vol up+3D and then I get a error screen in Korean.
When i try to connect it to my computer it just wont stay connected. (The connect and disconnect sound beeps with around 3s between)
Do anyone have a suggestion on how to fix this?
Sincerely, Henrik
Click to expand...
Click to collapse
well idont know
trie to conect the usb cable and trie to enter download mode
and re flash xball ics port
TMProduct1onZ said:
Try this:
-keep battery in
-hold vol+
-connect usb (hold vol+ 'till you enter download mode)
-flash ICS via LG FlashTool
oh and make sure you've installed the whole drivers.. (for omap4430 etc)
Click to expand...
Click to collapse
Thanks! :good:
I have successfully been able to enter download mode. I have also installed omap drivers and LG drvers. But
LG flashtool dosent start the flashing process. Any sugestions on how to solve this?
I have been looking around on other guides and the all say you need to connect your phone without the battery, but I cant do that as my phone wont stay connected.
Sincerley, Henrik
I just did mine. Leave the battery in. Connect your phone and it will power up for 3 secs then power off repeatedly. While this is happening, hold Vol + and Power and you'll enter download mode with the korean screen. Flash ICS404 again with LG Flash tool or smart flash (I used smartflash cos it was simpler and quicker)
LeighR said:
I just did mine. Leave the battery in. Connect your phone and it will power up for 3 secs then power off repeatedly. While this is happening, hold Vol + and Power and you'll enter download mode with the korean screen. Flash ICS404 again with LG Flash tool or smart flash (I used smartflash cos it was simpler and quicker)
Click to expand...
Click to collapse
Thanks man!!
Solved my problem. also changed the com port from 6 to 41 seemed to have helped.
Great to have this community of experts that can help you. :good::good:
Sincerely, Henrik
That files works only with wkpark method, i wrote it in the first post
Please read all before flash
Anyway was not necessary to reflash all the rom, you can just fix through wkpark fastboot
Hi everyone, I am having an issue with my a7 phone, when i power on it says
could not do normal boot, invalid kernel length
Click to expand...
Click to collapse
, then i connected the phone to my computer it constantly restarts and says the same thing
could not do normal boot
Click to expand...
Click to collapse
, can't enter into recovery mode, c'ant enter in download mode, even my pc and odin doesn't recognize the device at all, please help I can't afford a new one.
Thanks in advance.
Just flash stock rom with odin, conect to pc pressing vol + and vol - to get download mode
It doesn't react with + - buttons, that is why i can't flash it
What is the last OS you are running?
If the phone keeps restarting, first connect the phone to your PC via USB cable.
Then
1. Keep Vol+ and POWER pressed.
or
2. Keep Vol- and POWER Pressed.
Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged
I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck
juliàcarax said:
I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck
Click to expand...
Click to collapse
vol - and connect the cable, should bot in download mode
Condolences in your A7 brother
Let me explain to you...our phone have "bootclasspath" in its kernel...if this messed up you cannot do recovery or download mode. In short our phone samsung galaxy a7 2018 is hard breaked and good as dead, im sorry brother we shouldnt have messed with our phone...i understands your feelings:crying:
How do I do that?I have a problem with my phone too
dear my galaxy A750F same problem
showing could not do normal boot inval id kenrel length
i pressing vol down and up and plug in cable after press vol up and there showing massage . press vol down and power button but i many time try it's not working .
than i download obin and ap file and try to downloading but its not working and still not solve my problem .
i need your quick response and kind help
I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power
h4ck3rc1 said:
I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power
Click to expand...
Click to collapse
yes , plug into pc... odin flash latest twrp md5 for your device that will get you to recovery and start again
sakho1991 said:
Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged
Click to expand...
Click to collapse
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.
PiXi_0301 said:
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.
Click to expand...
Click to collapse
+1
read pit file by any tool , if the tool can read file then reflash phone if the tool can not read pit file the phone has been damaged