Hello,
I've just rooted my phone and got cwm recovery, but I just tried to flash CM10 and I got no phone signal, what should I do now? I've read the tutorial of flashing another kdz file.
Here is my phone's information: stock gb rom v21e, rooted, with cwm recovery installed by rom manager.
Million thanks!
khngkaho said:
Hello,
I've just rooted my phone and got cwm recovery, but I just tried to flash CM10 and I got no phone signal, what should I do now? I've read the tutorial of flashing another kdz file.
Here is my phone's information: stock gb rom v21e, rooted, with cwm recovery installed by rom manager.
Million thanks!
Click to expand...
Click to collapse
flash berni x-loader and u-boot
OptimusRs said:
flash berni x-loader and u-boot
Click to expand...
Click to collapse
No, i dont think that is his problem. Bernies files are for those who have been on ics. He obviously has not.
You should instead flash another baseband. I know ricardo says it isnt baseband related but it is. My cm10 was fine on 21a baseband and then i flashed 21e and the phone got no signal and rebooted all the time.
Try to flash baseband 18a.fls as that seems to work for most of us with lg flashtool
That is not true. There are a lot of us who have never been to ics and still had to flash bernie's files. After flashing bernie's files you can use any baseband. (I'm using v21e).
So just flash bernies files and you're good to go.
Sent from my LG-P920 using xda app-developers app
This bernie's files gives headache , you can't find place where to download it, all the link they post in here is dead end,it sound so difficult on how to use it, there is no steps on how to use it ,so there is no other method to get ICS or CM10 to work on your phone without bernie's files?
Just a question, , what is the diffrence between berni's files and rebooter files ??(in the resurrection guide) . I used bernis's files to downgrade and rebooter files to downgrade . They are the loaders and I'm sure they are the same ,, but rebooter is much easier and the files within it .
Sent from my LG-SU760 using xda app-developers app
bensmokie said:
This bernie's files gives headache , you can't find place where to download it, all the link they post in here is dead end,it sound so difficult on how to use it, there is no steps on how to use it ,so there is no other method to get ICS or CM10 to work on your phone without bernie's files?
Click to expand...
Click to collapse
take a look
http://forum.xda-developers.com/showthread.php?t=2037287
ICS from xbsall work for me without berni files (stable), CM10 too, but with many restarts and freezes.
krija said:
take a look
http://forum.xda-developers.com/showthread.php?t=2037287
ICS from xbsall work for me without berni files (stable), CM10 too, but with many restarts and freezes.
Click to expand...
Click to collapse
Bernies files are not for ICS
Sent from my LG-P920 using xda app-developers app
Thanks for your help and I'm really successful. I've got 21a now and CM10 on my phone now.
One of my friend told me I have to use wkpark's tool (uboot/omap4boot) and I googled it. Here's what I done and I know that's stupid but I wish someone could help because my phone should be bricked now.
First I got 21a flashed on my phone.
I flashed cm10 and gapps.
Then my friend told me about wkpark's tool.
I googled it and downloaded, then when that tool asks fastboot device? I chose N and replaced the two image to my phone.
What happened now is, once I turn my phone on it shows up a LG logo with a little word 'fastboot v0.5' on top, my phone do nothing now.
Could someone provide help? Million thanks!
xbsall said:
Bernies files are not for ICS
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
yes, i know. bensmokie wanted another flashing method for your ICS port, but it´s not needed.
Related
http://www.youtube.com/watch?v=EbO6zCdJNEM
I think it's because you were from ICS ! All user had ICS have the same problem.
If you were on ICS downgrade with BOOTV21E , when cwm starts factory reset, boot android, go to settings,format internal SD, reboot in cwm, install CM zip with modified boot.img, install gapps zip, get in download mode and flash v21a fls or any other compatible baseband.
That's it.
I've already done the downgrade! Then I followed this guide: http://forum.xda-developers.com/showthread.php?t=2037287 ... and finally I installed the V21A (bin and fls)
xbsall said:
If you were on ICS downgrade with BOOTV21E , when cwm starts factory reset, boot android, go to settings,format internal SD, reboot in cwm, install CM zip with modified boot.img, install gapps zip, get in download mode and flash v21a fls or any other compatible baseband.
That's it.
Click to expand...
Click to collapse
can you give me CM.zip with modified boot.img
Hey guys I have the same exact issue, did you solve it? Can you make a tutorial? Thanks.
fabersantucci said:
http://www.youtube.com/watch?v=EbO6zCdJNEM
Click to expand...
Click to collapse
u can only flash cm10 with nontouch recovery
Sent from my LG-P920 using xda app-developers app
pota-- said:
u can only flash cm10 with nontouch recovery
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Hi Pota,
I have for the first time installed the latest CM10 using CWM (no-touch) but.... after instalation the phone don't pass the LG logo.
in CWM I have wipe cache and data.
the Rom installed was GB 21E and never have installed ICS.
What am I missing to make CM10 work?
Thanks
Hi,
Can original stock O3D enter Fastboot mode?
I have been asking this question here and there, and I still have not got an answer yet. I got a totally unmodified O3D and I want to issue the fastboot commands. My idea is, use the command "fastboot boot boot.img" to load a custom recovery on PC to boot up the phone, thus we can backup both the original rom and also the stock recovery (and probably the bootloader also). If this idea works, it will benefit many users.
Thanks for every input!
midnite_
it is possible but there are alreadz backups of stock gb bootloader in mz post downgrade the undowngradable phones there is a link to a zip which contains the first 4 partitions on the o3d (the bootloader too).
P.S all original LG KDZ firmware files are with the stock rom(system partition) and the stock recovery.
P.P.S There are tools to konvert the kdz files into a bin file which can be extracted with another tool
berni987654321 said:
it is possible ...
Click to expand...
Click to collapse
May I ask how to?
berni987654321 said:
... which contains the first 4 partitions on the o3d
Click to expand...
Click to collapse
I think you should mean this of your thread and the bootloaderstuff.rar. The 4 partitions should be:
x-loader - mmcblk0p1
nv1 - mmcblk0p2
nv3 - mmcblk0p3
u-boot - mmcblk0p4
As far as I studied, I know in our Androids there are the bootloader, recovery, and the rom (OS). Am I got it incorrectly? Or would you please give a brief explanation about those 4 partitions?
berni987654321 said:
P.S all original LG KDZ firmware files are with the stock rom(system partition) and the stock recovery.
Click to expand...
Click to collapse
That is another question that I want to ask. What is actually in those KDZ files? Does it contains everything stock, so flashing the KDZ will let us return 100% stock? Or just rom + recovery, so the bootloader (and might be something else) is missing?
Thanks again!
midnite_
Kdz have bin/fls which are system and base and including stock recovery and yes flashing a kdz or bin will make your device 100 % new
Sent from my LG-P920 using xda premium
With wkparks omap tool you can go into fast boot mode. The most kdz files are containing boot partition recovery partition recovery partition and a few not interesting partitions. But there is one kdz file for the su760 which is the Korean version of the p920 which also contains the bootloader.
Sent from my LG-P920 using xda app-developers app
thanks alphatia for confirming that flashing KDZ will make our phone 100% stock.
thanks berni for helping me so much so far.
I have just followed these steps and finally successfully boot into fastboot mode - I could issue the fastboot commands without any problems. That guide is actually based on wkpart's thread (more detailed though) so I really dont know why I was failing for thousands times beforehand ... Anyway, I am there finally
So we could continue with the story - try loading a custom recovery from PC and backup everything stock. I will work on it a while later. I will definitely write up a guide if I have succeeded on it!!
cheers,
midnite_
Good btw don't use latest cwm its bad .
Sent from my LG-P920 using xda premium
alphatia said:
Good btw don't use latest cwm its bad .
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
u mean the one of 17 dec?
whats so bad bout it? any fixes?
I don't know exactly but i installed it two weeks ago and it was bad
Sent from my LG-P920 using xda premium
its a night;y, what do you expect? and you have the first one. I will advice you to get the last one on here: http://get.cm/?device=p920
im using 16. works just fine! :laugh:
Mr_Jongenelen said:
its a night;y, what do you expect? and you have the first one. I will advice you to get the last one on here: http://get.cm/?device=p920
im using 16. works just fine! :laugh:
Click to expand...
Click to collapse
He typed CWM, not CM
That's right he got it wrong....
Sent from my LG-P920 using xda premium
the threads are jumbled I can't get guide regarding flashing bernie's file to get CM10 working on V20P baseband,plz someone help?
eternal.sumit said:
the threads are jumbled I can't get guide regarding flashing bernie's file to get CM10 working on V20P baseband,plz someone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1942836
Get Xbsall's Rebooter Tool From Here.
Open the executable.
Select V21e and press enter.
Now take out the battery but be ready to plug it back in.
Connect the USB cable , now you should see a lot of details and at the end of the command line you should see this "Waiting for 5 seconds". That's when you plug the battery back in.
After that it should take care of the rest.
Cheers.
Sent from my LG-P920 using xda premium
still not clear
boltthrower56 said:
http://forum.xda-developers.com/showthread.php?t=1942836
Get Xbsall's Rebooter Tool From Here.
Open the executable.
Select V21e and press enter.
Now take out the battery but be ready to plug it back in.
Connect the USB cable , now you should see a lot of details and at the end of the command line you should see this "Waiting for 5 seconds". That's when you plug the battery back in.
After that it should take care of the rest.
Cheers.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I meant what are the bernie's files that i need to flash and how?so that i could run CM 10 on V20P baseband without problem
eternal.sumit said:
I meant what are the bernie's files that i need to flash and how?so that i could run CM 10 on V20P baseband without problem
Click to expand...
Click to collapse
Dude , do as i say and you won't have a problem. Think of the rebooter tool as "bernie's files flasher for newbs".
Edit ; Here is the link to the rebooter tool in case you can't find it;
http://d-h.st/24C
u dont actually need bernies files u need 2 be on a p920 fw n you are using a p925 so u cant flash cm10
just update to v21e and root install cwm and flash cm10
boltthrower56 said:
Dude , do as i say and you won't have a problem. Think of the rebooter tool as "bernie's files flasher for newbs".
Edit ; Here is the link to the rebooter tool in case you can't find it;
http://d-h.st/24C
Click to expand...
Click to collapse
i did as you said,after displaying long scripts it says:
**DONE**
<waiting for device>
and hangs on for long time.when i disconnect and open phone phone it doesn't show any network signals.what to do?
idriff said:
u dont actually need bernies files u need 2 be on a p920 fw n you are using a p925 so u cant flash cm10
just update to v21e and root install cwm and flash cm10
Click to expand...
Click to collapse
This is not true if you flash Bernie files it will work on the p925 with the v20 bb. I have tried and used all the cm10 ROMs and they all had good signal WiFi works data works phone works.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
Hey guys i am having little problem to get TWRP to run my device. the thing is like this I have flashed the ICS P920/P925 SU760 XBSA ICS 4.0.4 Custom Full 3D ROM so i would like to Flash the V5 http://forum.xda-developers.com/showthread.php?t=1963847
but we all know that it need to be with TWRP then it will work so 2days now i been searching way on how to install twrp so i come up with this one http://forum.xda-developers.com/showthread.php?t=1808585 i tried this with a terminal app, but after it done it shows me this as on my screen shot.
but nothing happen to my device no TRWP was installed anywa please any one please tell me if there is another way to install TWRP. so i can flash the version .
My Device is already ROOTED by the way.
That Recovery is for GB :/
You need this one: http://forum.xda-developers.com/showthread.php?p=33809758
Sent from my LG-SU760 using xda premium
TMProduct1onZ said:
That Recovery is for GB :/
You need this one: http://forum.xda-developers.com/showthread.php?p=33809758
Sent from my LG-SU760 using xda premium
Click to expand...
Click to collapse
Thanks mate, i fallow that guide and it works fine although i had little hard time to do it, and for some reason when i flash TWRP Recovery my phone goes to boot loop and at the end i decide to flash CWM recovery and it work fine, and i flashed the V5 of XBSALL its all done now. so THANK YOU.
Im having a problem.
I had to restore my phone. But now whenever the phone reboots, it's like it resets, IE like I've just done a data wipe. So I have to continually setup the phone (google account and all) whenever it reboots).
Tried flashing back to generic rom, same problem.
Tried blacking CM7.2, CM logo just keeps looping.
Tried unofficial CM10, gets in, but the screen goes black after a min or so. But installing CM10 did give me one clue the others didnt, it gave me a message saying the SD card is damaged and needs to be formatted.
I can still read and backup the SD card fine. Could this really be the problem or something else?
Also, I do have a nandroid backup, but it's getting a MD5 error, which I could fix, if I could root the device, which requires a reboot, but then the device resets.
Thanks!
/bumping
listen just flash a new firmware with LG flash tool and for cm10 use Bernie's bootloader
Sent from my LG-P920 using xda premium
alphatia said:
listen just flash a new firmware with LG flash tool and for cm10 use Bernie's bootloader
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
And what new firmware do you suggest? I've been using BOOTV21E_AP is there another one you suggest?
Also this is my girlfriends phone so I'm not up to date with all this phone's dev.
Where do I get Bernie's bootloader?
Masters2150 said:
And what new firmware do you suggest? I've been using BOOTV21E_AP is there another one you suggest?
Also this is my girlfriends phone so I'm not up to date with all this phone's dev.
Where do I get Bernie's bootloader?
Click to expand...
Click to collapse
I think the easyest way to recover the phone is by using LG's official Update Tool:
http://www.lg.com/pt/suporte-telemovel/lg-LGP920
Select your country and phone model. This software has the "recover phone" option, which will install the latest stock rom for your country.
If you want to skip the stock rom and install a custom or ICS rom you will need to flash the bernies files, which you can find here:
http://forum.xda-developers.com/showthread.php?t=1971014.
If you flash Bernies files with ICS get ready for a brick.