Related
I recently purchased an EKEN T01a and i can't get the thing to respond. While i was installing apps i tried to change the dpi settings from 120 to 150 and now the pop up message i receive on the screen says "Unfortunately, the launcher has stopped". I tried looking for firmware on the net to do a wipe but i have found nothing. If anyone can help i would appreciate it thanks.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
*** UPDATE 09 May 2012 ***
Finally EKEN has added the links for the T01, T02 and T10 firmwares to his website. They're compatible with T01a T02a and T10a too.
EKEN Support Page
***********************
EKEN T01A Stock ICS Firmware 4.0.3 (v0.8.1 - 2012-02-24)
Finally found, after a long ride : I attach the necessary software and instruction found over the net to flash it. In the firmware file there are further instructions and links, but this is the correct procedure from futeko dot com
Firmware details:
File Name: sun4i_crane_t01a_0.8.1_20120224.rar
Type: Firmware
Manufacturer: Eken
Tablet Name: sun4i_crane_t01a_0.8.1_20120224
Model Number: T01A T01
CPU Name & Model: Allwinner A10
Firmware Date: 2012-02-24
OS Name: ICS
OS Version Number: 4.0.3
Firmware Type: Stock
Flashing Instructions:
Q: How to flash firmware (also known as a 'ROM') on the Eken T01 and T10 (and T01A)?
A: This is a fiddly process so some perseverance might be required. It will work in the end. From user reports it seems to work most smoothly on the 32bit version of Windows XP. Instructions:
- Firmware must be flashed using a Windows application called Livesuit. Download it from the link below.
- Once downloaded, and before attaching your tablet to your PC, run the file 'LiveSuitPack_version_1.09_20111101.exe' from within the Livesuit folder. This should install a new device on your system (VID_1f3a_PID_efe8). This device may show with an exclamation mark in Windows Device Manager, this doesn't matter and can be ignored.
- Now download the firmware image you want to install. Firmwares are linked to in the downloads section to the left. After decompressing the archive you will end up with a .img file (e.g. 'sun4i_crane_t01a_0.8.1_20120224.img'). This is the firmware/ROM image that you are going to flash (or copy) to the tablet.
- Without attaching your tablet to your PC run 'LiveSuit.exe' from within the Livesuit folder. You should get an application with 6 icons.
- You will be asked if you want to be guided through the process, select no.
- Click on the leftmost icon (a cube), browse to your downloaded firmware image, and select it.
- Now attach your tablet to your PC by USB cable whilst holding down the volume+ button on the top. Straight after attaching the cable, and whilst still holding down the volume+ button, start pressing the tablet power button repeatedly. This (slightly frenzied) procedure puts the tablet into update mode.
- After a few seconds you will be asked if you want to perform a forced firmware update. Select yes. You will be asked if you're sure. Select yes.
- The update will start. You can release volume+ at this point.
- The update should take approx 3 minutes to complete. You will see a % complete progress bar during the process and will get a dialog saying OK when it's done.
- Turn your tablet on and you will have the new firmware.
Click to expand...
Click to collapse
Live Suit Pack v1.09 Link: Download / Mirror
EKEN T01A Firmware Link: Download
New Firmwares:
EKEN FTP Link: EKEN Public FTP
------------------------------------------------------------------------------------
ROOT Instructions & Script (windows):
PELASE READ CAREFULLY BEFORE PROCEED!!!
DOWNLOAD: Mediafire.com - BalTac-EKEN-RootScript
Instructions and script are fully based on the work of MrTasselhof for Ainol Novo 7 Advanced, from slatedroid forum. My only work was to adapt (I've deleted the uneeded part of the code from the .BAT file) and test the script for EKEN T01a Tablet. Maybe it just work even for other eken devices. Please feedback.
MrTasselhof said:
This is a straightforward script.
It's sole purpose is to get your device rooted and provide the tools to verify it.
------------------------------------------------------------------------------------
**IMPORTANT PRE-CHECK LIST**
Connect your tablet using the OTG port (normal procedure)
- YOU MUST USE THE INCLUDED USB CABLE
Make sure USB Debugging is ENABLED
- Settings --> Applications --> Development --> USB debugging (Green Checkmark)
Make sure to check Device Manager to ensure that there aren't any devices with a yellow exclamation mark.(WARNING: the eken tablet HAVE one of the drivers with an exclamation mark: please, just ignore it )
- Right Click on My Computer --> Manage Device --> Device Manager
Here is a link to a driver package I created... (I didn't need to use them. Drivers suited with LiveSuitPack are enough, but just in case...)
- Download Link: Mediafire.com - Android USB Multiple Driver Pack
-----------------------------------------------------------------------
Instructions:
Extract the folder to ANY location you wish. (it is self contained)
Run !RUN-ME-BalTac-RootScript.bat
You will be given the following prompt:
Make sure to enable USB Debugging on the tablet
- Settings -) Applications -) Development -) USB debugging (green checkmark)
'
1. Check Tablet Connection
2. Verify Tablet is ROOT Capable (with this script)
3. Run ROOT Script
'
4. Quit
'
Choose Option (1 thru 4):
Option 3 Performs the actual ROOT process.
- It also installs the following programs: (don't worry if they are already installed)
* Superuser
* Root Checker
* Root Explorer
* Busybox
Watch the magic happen
Enjoy!
Tasselhof
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
EDIT.:Zero Size Internal Storage Problem and the step taken to fix it.
(source.:http://forum.xda-developers.com/showpost.php?p=29800946&postcount=78 )
Got the same problem. After reset, storage size become Zer0!. Fixed it by doing this:
1. Put a copy of term.apk into my memory card.
2. Run file manager and locate term.afk, run it to install.
3. Open terminal emulator and got nice prompt. Alas don't get the sharp prompt (#)
***ROAD BLOCK*** Need to root the tablet first.
4. Grab Tesselhof script (Tasselhof - Root, Market, Build.Prop, & Tweaks Script - AllWinner A10)
5. Install PdaNetA350.exe just to be sure that the tablet connect....
6. Run Tesselhof. Da*n, did not work 100%. Continue with option 2,3,4,5 in Tesselhof. Reboot the tablet.
7. Rerun Tesselhof. Option 2,3,4,5 again! Success!!
8. Reinstall term.afk and running it...
9. Execute the god command "su" !! Yes.... got the sharp prompt! Hehe (#)
10. Typing this one liner to fix Zero size storage
cp /system/xbin/busybox /system/bin
Pressing enter and rebooting the tablet.
FIXED!!
File location:
Term.apk http://cloud.github.com/downloads/jackpal/Android-Terminal-Emulator/Term.apk
Tesselhof script:Tasselhof - Root, Market, Build.Prop, & Tweaks Script - AllWinner A10.rar (Link Broken: use mine above)
PdaNet: http://pdanet.co/bin/PdaNetA350.exe
Did not work on Eken T10
Hi,
I try this procedure on my Eken T10 and did not worked at all....even worst my tablet now boots to a black screen.... bricked !!!
any suggestions or ideas ???
Tried the procedure several times and no luck
freakma said:
Hi,
I try this procedure on my Eken T10 and did not worked at all....even worst my tablet now boots to a black screen.... bricked !!!
any suggestions or ideas ???
Tried the procedure several times and no luck
Click to expand...
Click to collapse
Maybe you are using the wrong firmware. this one is intended for EKEN MID T01A 7". Yours is the 10" tablet EKEN MID T10. But don't worry: There is a link that you can find in the guide that come with the previous firmware. Is an eken FTP space where are stored the latest firmware for T01A, T02A and T10A (and I suppose they are even compatible for T01, T02 and T10). Let's have a try. If this one won't work I'll try to find the specific T10 firm.
EKEN FTP link: CLICK
user: down
pass: down
Site Changed:
EKEN FTP Link: EKEN Public FTP
EDIT.: To download the files I must have to use Filezilla. With the normal browsing I've no success in downloading.
info on t01a
hi big big thnx, im use to flashing as ive done same to my sgs n sgs2 . been looking for info all day on about this n very little or even not cross referenced. i just bought her indoors a 7" android tab mid-t01a and kept getting a ' android.process.acore error ' it ended up being that the contacts apk wasnt installed . so found this link that help me out
pandawillforum.com/showthread.php?10059-i-need-eken-T01-firmwire
also here's the link for contacts apk
mediafire.com/?vhs5o5bigkadsma
anyways i thought i'd share my little bit of know how to everyone else
just in case ...
cheers again n1kman
Hello, just wondering if the 7" you mentioned firmware for in this post is the same as the MID-T01a available at geeks.com, amazon, ect
Here is one picture. I just searched for MID-T01A and found this post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Trying to figure out if there is any community/manufacturer support for this tablet, and if it is worth purchasing.
Banyon said:
Hello, just wondering if the 7" you mentioned firmware for in this post is the same as the MID-T01a available at geeks.com, amazon
[...]
Trying to figure out if there is any community/manufacturer support for this tablet, and if it is worth purchasing.
Click to expand...
Click to collapse
I think that Is the same device, but for now I haven't find any community that give an exaustive support to the tablet. There is something compatible in communities that develop for Ainol tablets, like slatedroid forum (some app and scripts. but don't use Ainol custom firmwares: they aren't compatible and will brick your device!!!). If you only need to ROOT that tablet you can try this using only the first 3 options (others might cause the tablet stop working or give some error):
Tasselhof ROOT script
If this external link is not allowed, I ask the moderators to warn me and I will report here the entire guide and the necessary files.
Hi,
Would you happen to be able to find T02's firmware? Eken's official FTP is extremely slow and impossible to download from.
T01's firmware doesn't work
mwerkz said:
Hi,
Would you happen to be able to find T02's firmware? Eken's official FTP is extremely slow and impossible to download from.
T01's firmware doesn't work
Click to expand...
Click to collapse
I've found this one (I can't try it so I'm not sure if it's a true T02 Fw): EKEN T02 Firmware 2012/04/07 - DOWNLOAD
But the download manager say to me that is an FTP transaction and the download is extremely slow (ETA: about 2 hours). If you want I can download it and reup in my mediafire account.
baltac said:
I've found this one (I can't try it so I'm not sure if it's a true T02 Fw): EKEN T02 Firmware 2012/04/07 - DOWNLOAD
But the download manager say to me that is an FTP transaction and the download is extremely slow (ETA: about 2 hours). If you want I can download it and reup in my mediafire account.
Click to expand...
Click to collapse
Hi!
Would appreciate if you caould do that, even from the link, the estimated download that's showing is 10days.......
*** UPDATE 09 May 2012 ***
Finally EKEN has added the links for the T01 T02 and T10 firmwares to his website. They're compatible with T01a too.
EKEN Support Page
***********************
mwerkz said:
Hi!
Would appreciate if you caould do that, even from the link, the estimated download that's showing is 10days.......
Click to expand...
Click to collapse
EKEN T02a Original Firmware
Android v4.0
Release Date: 2012/04/07
Mediafire.com - DOWNLOAD
Flasher:
LiveSuitPack v1.09 (USB drivers included)
Mediafire.com - DOWNLOAD
Flashing and ROOTing instructions: HERE
Useful Info:
mwerkz said:
This is the exact firmware I had before the brick. Finally got the device working again after two weeks of searching!
PS: It may be just me but it's good to know that installing the ICS Hide status bar hack (replacing android.policy.jar and Settings.apk) will not let the T02 boot pass the android screen.
Click to expand...
Click to collapse
baltac said:
EKEN T02a Original Firmware
Android v4.0
Release Date: 2012/04/07
DOWNLOAD
Flasher:
LiveSuitPack v1.09 (USB drivers included)
DOWNLOAD
Flashing and ROOTing instructions: HERE
Please, let me know if this is the right fw for you and if the ROOT work even in this tablet.
Click to expand...
Click to collapse
THANK YOU FOR THE LINK!
This is the exact firmware I had before the brick. Finally got the device working again after two weeks of searching!
Really appreciate the time and help you have rendered!
PS: It may be just me but it's good to know that installing the ICS Hide status bar hack (replacing android.policy.jar and Settings.apk) will not let the T02 boot pass the android screen.
has anyone tried this?
Hi, can anyone confirm that this is working?
also has anyone tried the v6 supercharge script on this tablet?
whiz_gadgetz said:
Hi, can anyone confirm that this is working?
Click to expand...
Click to collapse
For T01a I confirm for sure. Tested by myself.
For the T02a read the mwerkz post:
mwerkz said:
THANK YOU FOR THE LINK!
This is the exact firmware I had before the brick. Finally got the device working again after two weeks of searching!
Click to expand...
Click to collapse
whiz_gadgetz said:
also has anyone tried the v6 supercharge script on this tablet?
Click to expand...
Click to collapse
Haven't tried the supercharge script, sorry. If you test it, please report your feedback.
hi baltac..
i got eten t01a tablet. recently i edit the build.prop for the tablet. after reboot my tablet got stuck at android loading page. i push volume + and power button then the tablet loading to android system recovery 3e page. got message reboot system now, apply update from external storage, factory reset, wipe cache partition, apply update from cache. i try to select to factory reset nothing happen. can i use the firmware and steps which you post at first page to recover back my tablet? pls advice. tq
bellow is my previous builb prop before my tablet got stuck at start up screen.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=crane_evb-eng 4.0.3 IML74K 20120224 test-keys
ro.build.version.incremental=20120224
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 02月 24日 星期五 10:20:44 CST
ro.build.date.utc=1330050044
ro.build.type=eng
ro.build.user=pshu
ro.build.host=Ingen-cross
ro.build.tags=test-keys
ro.product.model=T01A
ro.product.brand=softwinners
ro.product.name=crane_evb
ro.product.device=crane-evb
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-evb
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=crane_evb-eng 4.0.3 IML74K 20120224 test-keys
ro.build.fingerprint=softwinners/crane_evb/crane-evb:4.0.3/IML74K/20120224:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=48m
ro.kernel.android.checkjni=0
persist.sys.timezone=GMT-8
persist.sys.language=en
persist.sys.country=US
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
persist.sys.usb.config=mass_storage,adb
ro.sf.lcd_density=120
ro.product.firmware=0.8.1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
hi.. ialready download the EKEN T01A Firmware but got message the file was corrupt when i try to open the img file. the file size about 105 mb.. pls help.
Thanks Baltac
will do =)
Thanks
Thanks for the files and instructions. They will be a great help.
Manage to boot up my eken after I download latest firmware from eken website. Latest update include the market enablers as well as flash support.
Android Ice Cream Sandwich for HD for all 900yer base on the Hi3716C Soc
Hello dear friends I managed to get working a new Ice Cream Sandwich 4.0.3 based on the 3.0.8 kernel and the update zips.
Requirements:
An Eboda HD for all 900 player (If you don't have one, buy one )
The device must be up to date with the latest original v1.0.0.r938 rom. The download page can be found here
An sdcard/usb-stick formated using FAT file system with at least 256 MB free space
Lots of guts (If you follow the procedure right nothing bad should happen)
Click to expand...
Click to collapse
Disclaimer
I am not responsible for any damage what-so-ever done to your Eboda HD for all 900, as with any ROM.
You accept this risk on your own !!!.
Click to expand...
Click to collapse
Instalation Procedure:
Be Aware that the install procedure will delete all data from the internal SD-CARD !!!
So back-up everything that is important
Get an USB-stick/SD-Card
Format the USB-Stick/SD-Card using FAT file system
Copy update_system.zip and update.zip to the USB-Stick/SD-Card
Make sure that you TV is switched on and the Player is connected to it
Shut down the player
Unplug any storage (USB-Sticks, SD-Cards, External or Internal Hard-Drives)
Unplug the power cable from the player
Insert the USB-Stick/SD-Card into the player
Push the player power button and keep it held down
With the power button held down plug in the player's power cable
Keep the player's power button held down for at least 5 seconds (you should be now in recovery mode)
Now the update procedure will start you will be able to see it happening on the TV
The update procedure has 2 main stages, after stage 1 it will reboot and continue the second one.
When the second stage will finish the updater progress bar will reach 100%
Wait till the second stage finishes then unplug the power cable and plug it back to boot the device
Congratulation !!! you flashed Android 4.0.3 on Eboda HD for all 900
Click to expand...
Click to collapse
Do not install any original/non original rom made by EBODA or whatever over this 4.0.3 version !!! It can brick your device permanently !!!
If you want to come back to the original v1.0.0.r938 you will find the instruction bellow.
After coming back to the factory version with the bellow procedure to v1.0.0.r938 you can install what ever ROM you wish on your own risk.
Installation Notes:
The installation will happen in 2 stages, the player will reboot once and continue with stage 2
After the second stage finishes you must unplug the power cable and plug it back again to boot the device.
This is necessary because of a bug in the new 3.0.8 kernel that does not handle well the power management.
Click to expand...
Click to collapse
Not Working:
The shut down.When you shut down the player it will enter in sleep mode.
Shunting down by command line will generate a kernel panic and the device will freeze,
case in which you need to unplug the power cable.
Click to expand...
Click to collapse
What is next:
Fixing the shutdown
Demystifying and eventually finding out why the player uses only 256 MB of RAM
Adding XBMC
Adding a launcher more suitable for a media player
Adding more specific media player stuff, like apps etc..
Click to expand...
Click to collapse
Reinstalling the original v1.0.0.r938 version:
Download the update_system.zip and the update.zip and follow the above install procedure replacing the zip update files with this ones.
Click to expand...
Click to collapse
Credits:
M1cha from this forum helping me with the initial rom am the technical procedure for flashing using UART that was necessary in the development stage.
Gmini Atlas Magic Box files from their download site used as base for this rom
Click to expand...
Click to collapse
XDA:DevDB Information
Ice Cream Sandwich for HD for all 900, ROM for all devices (see above for details)
Contributors
adrianaxente
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2014-06-15
Last Updated 2014-06-30
The files for 4.0.3 and 938 (update.zip) are the same in the download links...can you check please?
bau33 said:
The files for 4.0.3 and 938 (update.zip) are the same in the download links...can you check please?
Click to expand...
Click to collapse
The files and the links are ok.The names of the zips are the same, that is right, but the content ins different.The update_system for the 4.0.3 and 938 are similar in size but the differences are:
update_system.zip for 4.0.3 is similar in size to the 938 but the content is slightly different.The 4.0.3 has a different bootargs.img that has been modified for the 4.0.3 rom, the boot.img (the bootloader) for the 4.0.3 is the same as for 938 with the only difference that has been patched because it hold a hard-coded partition layout for the recovery, and the recovery is completely the same.
update.zip for 4.0.3 is completely different from the one for the 9.3.8
So the files are as posted:
For 4.0.3:
update_system.zip https://www.dropbox.com/s/ogqnyasiafz4126/update_system.zip 7.96 MB
update.zip https://www.dropbox.com/s/t90did16in2whe6/update.zip 108.53 MB
For the 938
update_system.zip https://www.dropbox.com/s/wh1m1oq4xtif41n/update_system.zip 7.08 MB
update.zip https://www.dropbox.com/s/dec9fmqtai30tv4/update.zip 95.26 MB
Please don't forget to give me some feedback if you install and test it.
Best Regards
The link from 4.0.3 is sending me to a download page. If i press Direct download, the file which downloads has 98.5 MB and the same md5 like the one from 938. Can you post the files somwhere else?
Im very eager to try the firmware and i will feedback it !
PS: I'm realy amazed that you managed to make this rom! Very good job!
bau33 said:
The link from 4.0.3 is sending me to a download page. If i press Direct download, the file which downloads has 98.5 MB and the same md5 like the one from 938. Can you post the files somwhere else?
Im very eager to try the firmware and i will feedback it !
PS: I'm realy amazed that you managed to make this rom! Very good job!
Click to expand...
Click to collapse
Ok I updated the download urls.I re-shared the zip files by DropBox.
Best Regards
copied the files on the stick, powered off -on with the Menu button pressed, started to install, rebooted once and now stuck on the Eboda logo - doesn't want to enter recovery mode anymore. any ideea?
bau33 said:
copied the files on the stick, powered off -on with the Menu button pressed, started to install, rebooted once and now stuck on the Eboda logo - doesn't want to enter recovery mode anymore. any ideea?
Click to expand...
Click to collapse
Hello I also reproduced the issue reported by you.
It seams that when going from the original 938 to 4.0.3 the device gets a kernel panic because of some wrong combination of kernel and recovery.
Looking forward to fix it.
Please give me your phone number so, I can talk about the next steps of fixing your device.
Best Regards
bau33 said:
copied the files on the stick, powered off -on with the Menu button pressed, started to install, rebooted once and now stuck on the Eboda logo - doesn't want to enter recovery mode anymore. any ideea?
Click to expand...
Click to collapse
The bug was fixed now, but unfortunately your device is bricked and it can be restored only by using a ttl-serial to usb or tt-serial to RS-232 (computer old serial port) adapter.
Please send be your device by post and I will restore it for you since bricking it was my fault
if is not possible I can provide detailed instructions how to restore it.
Best Regards
Veolo
Salut, am un AC RYAN VEOLO, stiu ca e cam acelasi lucru cu Eboda HD900, as putea incerca acest firmware sau risc prea mult?
Merci
dead links
Please reupload...
Un link de download pentru ICS 4.0.3 for HD for all 900 se poate ?
I know it's very old but can anyone provide the links again ?
Thanks !
Up !
reupload please
Hello,
I am using samsung galaxy trend 2 duos s7572..i couldn't find a single custom recovery for my phone on google.then i found a post about online cwm builder.i tried to use that builder.but after uploading the recovery.img the page says:
"Your build has been queued. The build id is:
ce45a0bc59aeacd716de24f1e2e0aebc
Continue to the build server.
View the current build output."
Then after clicking the "view the current build output" it says:
"HTTP ERROR 404
Problem accessing /job/recovery/lastBuild/console. Reason:
Not Found
Powered by Jetty:// "
I dont know what the problem is. Anyone help me solve the issue.or it would be better if anyone can build me a cwm for my phone.my phone's recovery img has been attached.
Thanks in advance
Hi All
Today I am releasing Moto X Play (India) Official Marshmallow 6.0 OTA ZIP File. This was released by Motorola for Indian Version of Moto X Play. Get your hands dirty and share your feedback. :laugh:
Mega - https://mega.nz/#!KVB3wSyb!_Wdce9oQOcKGPeXl26GLsgftwnanDTq-QZ9TRhdJprA
Dropbox - https://www.dropbox.com/s/p4ixlrg0naml1c6/Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03.zip?dl=0
Google Drive - https://docs.google.com/uc?id=0B8kDOqfxRXEhRjZ0b3o3OHA1bnc&export=download [Credit For Google Drive URL - @amitnvis]
GitHub - https://github.com/motoxplay/stock/releases/download/v6.0.0/file_delta-ota-Blur_Version.23.21.10-24.11.18.lux_retasia_ds.retasiaall.en.03.zip [Credit For GitHub Link - MastahF]
This OTA Update can be applied ONLY on Android 5.1.1 Build LPD23.118-10 and will be updated to Android 6.0 Build MPD24.65-18. Users who have Android 5.1.1 Build LPD23.118-32 have to wait for OTA from Motorola OR get the update from Moto Care Service Centre.
==================================================
Filename : Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 97de580ffa00578e79ef0b1d1cf9ace1
SHA1 : f778fabf0822f943aabc6d7382f1df97bdb25709
CRC32 : 65ab8e6f
SHA-256 : 57fc7c74288eb2e9b01b9e175f32f2cf49c4cbd5311289a77ab7963da2f71ff6
SHA-512 : 786b9fb8398a14b201a4b97c8a4c3e68884137b97eaae653d2ea7512bde01377c32a672b4caae5cf36d7cb351bd011c083c7efe70e4bca72c4da02b6e10b973a
SHA-384 : e460d760ec1a8ffaf50ec6c2a46011c43049aa900cc65194f8f0e73a570dfe66ca39658614a7e8575376bec6021eae56
Modified Time : 12/9/2015 12:58:28 AM
Created Time : 12/9/2015 12:51:13 PM
File Size : 611,237,778
File Version :
Product Version :
Identical :
Extension : zip
File Attributes : A
Model : Indian XT1562 100% [ Unsure if it will be compatible with other regions and variations of handset ]
==================================================
NOTES :
This has to be used on Android 5.1.1 to upgrade to Android 6.0! You will not get any update notification in Android 6.0 for this update BUT will get for any newer builds. This is OFFICIAL FINAL UPDATE. So don't post comments again like "Will i get update notification after applying this update". Why will you be notified by Motorola to apply same update that you have already applied ?
Announcement
New Update Adding VoLTE Support Can Be Found At http://forum.xda-developers.com/moto-x-play/general/moto-x-play-india-official-marshmallow-t3407068
Regards
XDASNR
Steps To Update To Android 6
Save the downloaded file to Root of SD Card and follow instructions :
Method 01 [Reported By Many Users]
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select dowloaded .zip File and press Power Button.
Updatation Process will start. It will take about 30 Mins to complete updatation.
Already exists 2 threads talking about that.
http://forum.xda-developers.com/moto-x-play/general/android-marshmallow-6-0-soak-otalink-t3265928
http://forum.xda-developers.com/moto-x-play/general/noobs-to-upgrade-moto-x-play-to-t3266264
Hi,
Thanks for youy sharing
Can't download the file now Error on Mega web site.
Dudlei said:
Already exists 2 threads talking about that.
http://forum.xda-developers.com/moto-x-play/general/android-marshmallow-6-0-soak-otalink-t3265928
http://forum.xda-developers.com/moto-x-play/general/noobs-to-upgrade-moto-x-play-to-t3266264
Click to expand...
Click to collapse
This is not the same OTA.
dont work. fake?
DieOrange said:
dont work. fake?
Click to expand...
Click to collapse
@DieOrange - It is Genuine. It is downloaded directly Moto Servers. The ones posted in other threads are for Brazillian Versions. This is Indian Version.
XDASNR said:
@DieOrange - It is Genuine. It is downloaded directly Moto Servers. The ones posted in other threads are for Brazillian Versions. This is Indian Version.
Click to expand...
Click to collapse
your link/mirror dont work. maybe you can upload to other hoster?
006fazer said:
Hi,
Thanks for youy sharing
Can't download the file now Error on Mega web site.
Click to expand...
Click to collapse
May be your ISP has blocked mega.nz. Is anyone else facing this issue ? I will have to upload it to other filesharing site in that case.
Thanks for sharing, I can't download either (Europe).
Thanks, I confirm that is impossible to download the file neither from the browser or from the mega plugin. I'm connencting from Europe.
This can be installed on the moto x play eu version or I need to flash the original India Firmware first? I've an non-rooted moto x play.
I have the same question
It could be. The Filename looks good. But with no Mirror it would be hard to test
Can't download even from mega app
XDASNR said:
May be your ISP has blocked mega.nz. Is anyone else facing this issue ? I will have to upload it to other filesharing site in that case.
Click to expand...
Click to collapse
not downloading error
Upload To New File Sharing Site In Progress
Refer Original Post For Additional Download Links To Dropbox
After many retry download started !!! in progress....
I finally downloaded file from mega. But I dont know what to do.
My build is:
23.21.10.lux_reteu.reteu.en.EU reteu
LPD23.118-10
it seems now Mega works. WTF.
You can add the second Mirror too. more is better
Apply through adb sideload => success
Boot in progress, optimyzing applications....
[Phone Vodafone Smart Turbo 7][ROM][V1.0 - 19/09/17 (DD/MM/YY)]
Code:
*** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Introduction
If you want to put root and TWRP on your device then you have to commit to this as there is no going back from Alcatel to Vodafone firmware after this unless someone uses the scatter file for this device to perform a readback (SP Flash Tool, search: Hovatek how to make a full backup of your stock ROM using sp flash tool, however, the dev blocks should be gathered straight from the scatter file, not MTK droid tools. Will update this if this happens it is successfully conducted by someone ) This little corner of XDA will show you how to:
Flash Alcatel Firmware
Install Custom Recovery (TWRP/CTR)
Root with SuperSU
Install one custom ROM (Cyanogen MOD 13)
NOTE: I will NOT teach you how to install drivers if you need to do that go to https://forum.hovatek.com/thread-440.html (If you are running Windows 7 and up you need to disable 'Driver Signature Verification', this link will show you how to do it: https://forum.hovatek.com/thread-752.html
If you can't figure out how to that by yourself (everything is a google search away) then you shouldn't even attempt any of this.
All files will be on AndroidFileHost
If you want to download all the files for all the tutorials, then you can download the complete package which has everything required for the tutorials (except for drivers of course)
Click to expand...
Click to collapse
Installation instructions
All instrucrions are in this set of Youtube videos that I MADE
(link) VFD501 Playlist
Custom ROMs
For Mokee
Boot to recovery
Wipe data/factory reset, wipe system, wipe cache
Install ROM then GAPPS
Reboot
For Resurrection Remix/RR
Boot to recovery
Wipe data/factory reset
Install ROM then GAPPS
Reboot
Click to expand...
Click to collapse
Download
All Packages are now located on AFH (android file host) -----> Here
{Download GAPPS from here Selections are ARM, 7.1/6.0.1 (Depending on ROM Version), and any package you want (preferably aroma or pico) }
SP Flash Tool: Here (You don't need this if you have the 'Flash VFD to Alcatel Package')
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: 19/09/17 = DD/MM/YY
[note] -- insert note
[new] -- insert new - [link to commit if applicable]
[changed] -- insert changed - [link to commit if applicable]
[fixed] -- insert fixed - [link to commit if applicable]
Older changelogs:
Code:
Changelog: -- insert date
[note] -- insert note
[new] -- insert new - [link to commit if applicable]
[changed] -- insert changed - [link to commit if applicable]
[fixed] -- insert fixed. - [link to commit if applicable]
Click to expand...
Click to collapse
FAQ
Ask Questions in Disscussion
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* RootJunky (Inspiration to work with Android)
* @CVAngelo (For making me want to prove him wrong, lol)
XDA:DevDB Information
Vodafone Smart Turbo 7 / VFD 501 / VFD 500, ROM for all devices (see above for details)
Contributors
Jamalama
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.0 Marshmello
Based On: Stock Alcatel ROM
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-09-19
Beta Release Date: 2017-09-19
Created 2017-09-19
Last Updated 2018-08-09
Reserved
Success, All files will now be uploaded to Androidfilehost
Reserved
NOT done yet
not done yet
I have questions......
Since Google keeps crashing me out of apps and breaking my brightness control to send me ads and try to get me to install experimental zombies this past month, I'm keen to try this on my VFD501 Vodafone Smart Turbo 7 but.....
Does the initial step have to be Alcatel? I only ask because my SIM is 2 Degrees and I don't know if it'll work with it as it's a bit sketchy while it's still thinking it's a Vodafone.
Is the second step the ONLY rom it'll work with? How far can the hardware be pushed or more efficient?
Lastly, would I still be able to get updates for the usual app suspects? I'm getting further into Minecraft now there's online server games and I'm not finding any options for updates other than through the Play Store. I also watch quite a bit of YouTube on it (another Google aquisition). Would these be denied me by the EvilCorp™ once I free my phone from it's clutches and get rid of Google Movies, Google Mail, Google other bloatware aside from Books where I have several and would like to keep reading them?
HIe, when can we get the custom rom.looks great.
Do you still have the mixed Spanish English rom?
Could you post that please if you still have it? When i installed the cyanogenmod after flashing to alcatel after locking the screen and turning it on again it won't render properly anymore, i just see random lines. Thank you in anticipation!
guys, please can anyone make a backup (TWRP)of stock ROM with /system /data /FRP /protect /boot ? with any google account please.
i want to unlock FRP on my vfd500, i gorgot my google account on this phone so i cant go pass setup wizzard, thanks
Vamptonius said:
Since Google keeps crashing me out of apps and breaking my brightness control to send me ads and try to get me to install experimental zombies this past month, I'm keen to try this on my VFD501 Vodafone Smart Turbo 7 but.....
Does the initial step have to be Alcatel? I only ask because my SIM is 2 Degrees and I don't know if it'll work with it as it's a bit sketchy while it's still thinking it's a Vodafone.
Is the second step the ONLY rom it'll work with? How far can the hardware be pushed or more efficient?
Lastly, would I still be able to get updates for the usual app suspects? I'm getting further into Minecraft now there's online server games and I'm not finding any options for updates other than through the Play Store. I also watch quite a bit of YouTube on it (another Google aquisition). Would these be denied me by the EvilCorp™ once I free my phone from it's clutches and get rid of Google Movies, Google Mail, Google other bloatware aside from Books where I have several and would like to keep reading them?
Click to expand...
Click to collapse
So far you have to flash Alcatel to do any modding whatsoever, however, I may have a solution so we can get root on VFD 500 running Vodafone stock but not VFD 501 (however I'm begging my friend to borrow his to do a Miracle Box Backup so fingers crossed :silly: so I can get the 501 version of the Vodafone OS) if the solution works I will release a video on it, if you want to know if you have to flash Alcatel for custom ROMs yes you need Alcatel for the ROMs there is currently no ROMs for this device, and I don't know how to make and edit ROMs just gonna put that out their
Not working for me. Format completed OK. but then error "S_FT_ENABLE_DRAM_FAIL (0xFC0)" given when doing the download and format. Vodafone VFD501, used scatter file provided, drivers appear to be installed ok except i get "MediaTek USB port" used by the firmware loader. "MediaTek Preloader USB VCOM Port" stays even when phone is not plugged in and had yellow triangle
squowse said:
Not working for me. Format completed OK. but then error "S_FT_ENABLE_DRAM_FAIL (0xFC0)" given when doing the download and format. Vodafone VFD501, used scatter file provided, drivers appear to be installed ok except i get "MediaTek USB port" used by the firmware loader. "MediaTek Preloader USB VCOM Port" stays even when phone is not plugged in and had yellow triangle
Click to expand...
Click to collapse
Solved now using this rom and instructions.
Can't post links so google - Download Vodafone Stock Rom for all models - Android MTK and look for VFD500 in the list
The driver tool uninstalled lots of drivers i think this may have helped it use the "MediaTek Preloader USB VCOM Port" which allowed it to write to the phone. Took about 10-15 mins to boot afterwards, I thought it was stuck but just a slow phone
After falsh Vodafone Smart Turbo 7 VDF 500
Hi I followed the whole procedure everything works fine if I do not press the power button so that his left in standby everything works as it should this rom is beautiful until my vodafone Vodafone Smart Turbo 7 VDF 500 goes on standby the screen becomes blurry if I do not press the start / stop button so that his parte in standby everything works as it should this rom is beautiful I would have to remove the battery and I put it back for his return normally Help me please.
Vodafone Smart Turbo 7 V 500 goes on standby the screen becomes blurry after flash
Hi I followed the whole procedure everything works fine if I do not press the power button so that his left in standby everything works as it should this rom is beautiful until my vodafone Vodafone Smart Turbo 7 V 500 goes on standby the screen becomes blurry if I do not press the start / stop button so that his parte in standby everything works as it should this rom is beautiful I would have to remove the battery and I put it back for his return normally i use the custom rom all stock rom not run
Hello community
Can someone please give me valid links and tutorials for unlock this phone, i´ve been here for more than 6 hours looking on how to do this, but there´s always a software or file missing. I can´t even install the USB drivers, or find a TWRP properly.
What a headache..
Thanks in advance
any luck with finding the required files?
Vodafone_Smart_Turbo_7_VFD500 - RR 7.1 ROM + TWRP 3.0.2 + SP Flash Tool + VFD500_ROM
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500 phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
To use SP tool, first install the drivers then open SP tool, search for MT6735M_Android_scatter.txt file. To install full Vodafone ROM click in Download only and select Format All + Download then Download key above and plug USB, to install TWRP unselect all and only select recovery and click in location field, search for TWRP, click in download from above and plug USB ( If faild with error you need to flash all Vodafone ROM first).
After all this, use TWRP to flash RR Rom then Gapps.
Mega.nz Link
I hope this helps you to!!!
persona78 said:
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500 phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
Mega.nz Link
I hope this helps you to!!!
Click to expand...
Click to collapse
Unbelievable. I'll give it a go later thanks