Hi Guys.
I am using alpha 4 from last one month and experience was awesome but from last 1 week I am getting lot of FC for lot of services like exchange service gapps what's up camera and lot more. I am not sure why FC issue started happening from last one week.
History :
I was using CM 10 alpha 1 then alpha 2 then alpha 3 and now on alpha 4.
I really fed up with Force close issue from last one week . I tried reboot but still 80% of apps and services getting FC. Please guide me on this .
Sent from my GT-I9003 using xda app-developers app
Sent from my GT-I9003 using xda app-developers app
Sent from my GT-I9003 using xda app-developers app
[email protected] said:
Hi Guys.
I am using alpha 4 from last one month and experience was awesome but from last 1 week I am getting lot of FC for lot of services like exchange service gapps what's up camera and lot more. I am not sure why FC issue started happening from last one week.
History :
I was using CM 10 alpha 1 then alpha 2 then alpha 3 and now on alpha 4.
I really fed up with Force close issue from last one week . I tried reboot but still 80% of apps and services getting FC. Please guide me on this .
Sent from my GT-I9003 using xda app-developers app
Sent from my GT-I9003 using xda app-developers app
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
first flash XXKPE+PIT without bootloader ok?
then flash DDLF2
then flash CM10 A4
this is procedure for install CM10 A4
-wipe data,cache,dalvik cache
-flash CM10 A4
don't reboot!
-flash GAPPs
-reboot
-wait until 5 minute
-final reboot!
:good:
Hi Volkf,
Thanks for your reply but i have followed all the steps mentioned by Dhiru while flashing CM 10 alpha 1. Then flashed the aplh2, now i am using the alpha. I never faced the FC issue but from last one week most of my services ( appps) getting FC. Is this related to new partition created in alpha4 ?
MR.Volkf said:
first flash XXKPE+PIT without bootloader ok?
then flash DDLF2
then flash CM10 A4
this is procedure for install CM10 A4
-wipe data,cache,dalvik cache
-flash CM10 A4
don't reboot!
-flash GAPPs
-reboot
-wait until 5 minute
-final reboot!
:good:
Click to expand...
Click to collapse
[email protected] said:
Hi Volkf,
Thanks for your reply but i have followed all the steps mentioned by Dhiru while flashing CM 10 alpha 1. Then flashed the aplh2, now i am using the alpha. I never faced the FC issue but from last one week most of my services ( appps) getting FC. Is this related to new partition created in alpha4 ?
Click to expand...
Click to collapse
nope i don't face this issue,but you can flash CM10 A4 directly from stock rom
MR.Volkf said:
first flash XXKPE+PIT without bootloader ok?
then flash DDLF2
then flash CM10 A4
this is procedure for install CM10 A4
-wipe data,cache,dalvik cache
-flash CM10 A4
don't reboot!
-flash GAPPs
-reboot
-wait until 5 minute
-final reboot!
:good:
Click to expand...
Click to collapse
Hi Volkf
The FC issue is resolved .. Wipe data and cached --> Formatted data -- Re flashed CM 10 a4, Gapps .. No issues now .. Thanks all...
Comments for user who want to flash CM 10 a4 and are on cm 10 a3.
--------------------------------------------------------------------------------------------------------
As per instruction for Dhiru - When you are flashing cm 10 a4 from cm 10 a3 no need to wipe the datat and cache. but i thin g we should wipe the data and cache and format the data in advance.. Other you may face the FC issue.. Thanks
Related
Team Passion and gmillz has been working on a new project. Its in the early phases of development and is flourishing fast.
Team Passion Site: http://team-passion.com/
We are not responsible for any bricks or loss of data you may have experienced due to your decision to modify your $500 device. Flash at your own risk. If you cry to us, we will laugh at you.
Kernel Source: http://forum.xda-developers.com/showthread.php?t=1775075
Thanks to
Team Chopsticks
http://www.teamchopsticks.org/
Team Kang
http://aokp.co/site/
Sk8trwitskil
http://forum.xda-developers.com/showthread.php?t=1775133
Cyanogenmod
http://www.cyanogenmod.com/
TheDerekJay
http://forum.xda-developers.com/showthread.php?t=1775075
R4INS
http://forum.xda-developers.com/member.php?u=4446500
Team NAND (Noobs and Rookies)
http://forum.xda-developers.com/showthread.php?t=1798056 / FB Page: https://www.facebook.com/groups/205511066243382
US Armed Forces
Special Thanks
gmillz
http://forum.xda-developers.com/member.php?u=4527723
Instructions
Fresh Install
wipe everything
install ROM
Install gapps
Reboot
Let settle for 10 mins if you can
reboot to recovery
flash darkside venom cm10 kernel
reboot
--Flashing Over Instructions
--May flash over cm10
Wipe Cache
Wipe Dalvik
Flash ROM
Flash Darkside kernel
http://d-h.st/O6F
Reboot
Fix permission
*Over AOKP JB 8/3
Reboot to recovery
Wipe Cache
Wipe Dalvik
Flash Darkside Kernel
http://d-h.st/O6F
Reboot
ROM download (A2): http://d-h.st/AYz
actually, putting the darkside kernel in the ROM caused a few problems ATM, so just flash the orginal 8/3 AOKP JB build and flash the darkside kernel. it will fix camera. i will build a new working on later today...sorry for any inconvenience
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
Darkside Kernel : http://d-h.st/O6F
Supersu flashable zip: http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip (thanks chainfire)
Bugs
Same as cm10
*Working
Camera (it produces a green tint upon opening but takes perfect pictures)
ROM Control
Google Now fully functional
*Added
Darkside Venom CM10 kernel courtesy of TheDerekJay (http://forum.xda-developers.com/showthread.php?t=1775075)
.....more to follow
Sent from my SAMSUNG-SGH-I727 using xda premium
Change log- 8/5/2012
*Updated to base cm10 from 8/05/2012. Thanks dakpluto!!!
*Torch works
*Gnow works fully
*Camera fully works, however, it does produce the green tint, but if use a camera app from the market, it wont have that tint.
*Added TheDerekJay's Darkside Venom Kernel which fixed camera. Thanks!!!
*Use ROM Toolbox to use the new governor badass that darkside possesses, until ROM Control is fully developed
*same bugs as latest cm10 build.
Change log- 8/3/2012
*Updated to base cm10 from 8/03/2012. Thanks Team Rookie!!!
*Torch works
*Gnow works fully
*Camera may work, just as touchy in the latest cm10.
*same bugs as latest cm10 build.
*thanks to R4INS for his help
I'm special.
Sent from my Nexus 7 using XDA Premium HD app
I guess this one is mine lol
Sent from my SAMSUNG-SGH-I727 using xda premium
This ones mine
Btw if you don't like dev-host here's a mirror http://db.tt/x5G2CCfm
And gapps http://db.tt/7Xqp7qzC
Inverted gapps http://db.tt/hVdYPiol
Sent from my SGH-I897 using Tapatalk 2
This one is mine
Just kidding... dowloading
Btw this is, at the moment,the same as cm10, but with toggles right?
tonk12 said:
This one is mine
Just kidding... dowloading
Btw this is, at the moment,the same as cm10, but with toggles right?
Click to expand...
Click to collapse
Yes but since rom control isn't functional yet we can't customize toggles. We anticipate quite a few fixes in the next few days/weeks
Sent from my SAMSUNG-SGH-I727 using xda premium
My skyrocket is at home, will flash this when I get it,,, good job MILLZ :thumbup:
Sent from my GT-P3100 using xda app-developers app
Too intoxicated to flash, need to sleep. However will try tomorrow. Awesome to see this in progress as well. Thanks guys.
Damn how obsessed am I with this phone that I check XDA before passing out.
Cheers
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
whosgotlag said:
Too intoxicated to flash, need to sleep. However will try tomorrow. Awesome to see this in progress as well. Thanks guys.
Damn how obsessed am I with this phone that I check XDA before passing out.
Cheers
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm doing the same
Sent from my SAMSUNG-SGH-I727 using xda premium
Awesome work. Going to flash asap
Sent from my SAMSUNG-SGH-I727 using xda premium
Definitely a smooth ass ROM . By far superior however been checking the such status and its showing as not rooted although su is present and update binary passed without issue set CPU won't show access either
Sent from my SAMSUNG-SGH-I727 using xda premium
crashpsycho said:
Definitely a smooth ass ROM . By far superior however been checking the such status and its showing as not rooted although su is present and update binary passed without issue set CPU won't show access either
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1775133
Go there and flash the su from the OP. click on the link besides root to download. Worked for me
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I get fc's every time i try to open up gnow. Just says unfortunately google search has stopped.
Does this ROM have call echo
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
peconaut said:
Does this ROM have call echo
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
It has the same not-so-great in-call audio quality that cm10 has right now. This rom will be updated alongside with that one.
Sent from my part of the problem
thenicksherman said:
I get fc's every time i try to open up gnow. Just says unfortunately google search has stopped.
Click to expand...
Click to collapse
Clear data and try again ... if it doesn't work then clear everything and flash again
GApps Download Down
Thanks for the upload!
I did try to download the GApps but the link is down due to to much traffic...Is this using the GApps that is available on goo.im (tinyw dot in slash Ntba)(sorry, can't post links yet...) which is the version dated 2012-07-19 or is the link in the OP something specific?
Thanks again!
Michael
mphillippi said:
Thanks for the upload!
I did try to download the GApps but the link is down due to to much traffic...Is this using the GApps that is available on goo.im (tinyw dot in slash Ntba)(sorry, can't post links yet...) which is the version dated 2012-07-19 or is the link in the OP something specific?
Thanks again!
Michael
Click to expand...
Click to collapse
Here's gapps: http://d-h.st/GxJ
Here's inverted gapps: http://d-h.st/xWo
gmillz said:
Here's gapps: (edited as I can't post links yet...)
Here's inverted gapps: (edited as I can't post links yet...)
Most Excellent! Thanks!
Michael
Click to expand...
Click to collapse
I was an user of DDLF2 earlier, then downgraded to XXKPQ to install RemICS 1.5.3
I rooted my phone then installed RemICS 1.5.3 from scratch. Everything is working fine now, but the ROM is slow to response.
Everyday phone is becoming slower then previous day.
I had used this thread: http://forum.xda-developers.com/showthread.php?t=1695175
Are there any fix for this?
Kindly help guys.
Clear cache, dalvic cache and fix permissions in advanced tab.
Sent from my GT-I9003 using xda app-developers app
ok man do full wipe and instal the room again or
wait for next release which will probably coming soon
and fix these bugs and problem >>
Some time ago I was using that ROM.
The same happened to me.
It's a beautiful ROM, but it's becoming slower over time.
After some weeks using it, the ROM becomes slow and with much lag.
Now I'm using CM9 Alpha 11 with TWICS MOD for get the Galaxy S3 appearence.
CM9 it's very stable and fast.
Sorry for my bad English.
Greetings!
Same prob with me on both cm9 and aokp, rom getting older day by day
Trying to install the latest version of aokp(4.1) on the one S..... Prior to 4.1, had no issues with the fusion kernel (2.0)....
Because of the wifi driver being built from source now Fusion ultimate AOSP will break wifi on newer CM builds . Klin1344 suggest using the new kernel since it's much improved and faster...:good:
So I followed the installation instructions on the AOKP Jellybean build 4.1.
Installs great... The kernel switchs from fusion to the new one and WIFI works... as soon as I reboot and it reverts back to the fusion kernel and lose WIFI... I literally need to fastboot the boot.img from rom.zip after every reboot and its driving me crazy.
What do I need to do to prevent the kernel from switching back after reboot? I also tried installing the cm 10 nightly that has a different kernel and it does the same thing. I had a back up( my only backup since my old computer died) with the Fusion Kernel 2.0 with unofficial AOKP Jellybean 4 on it and i have no current issues with this build besides the video glitches.
Cm10 now uses a unified kernel for the one xl ,one s and evo lte. It is also using a open source WiFi module now. Fusion is not using the new kernel source and is not compatible
Sent from my One X using xda premium
So how do I install aokp 4.1 if I have the fusion kernel installed on aokp 4? As soon as install 4.1 , the new kernel works and then as soon as I reboot the phone it seems to revert back to the fusion kernel
Sent from my HTC One S using xda app-developers app
Anyone ? Really want to remove this kernel ... please help
Sent from my HTC One S using xda app-developers app
What you're saying doesn't really make sense. When you flash one kernel, it erases the one installed previously. I'm guessing you are not really flashing the kernel properly in fastboot.
Trying to install the latest version Cm10 ......any build prior to October 1st , had no issues with the fusion kernel...I understand that because
of the wifi driver being built from source now Fusion ultimate AOSP will break wifi on newer CM builds . Obviously I want to update to the latest build and update the kernel ..
my problem is after I install the latest build , The kernel switches from fusion to the new kernel and WIFI works. Then as soon as I reboot and it reverts back to the fusion kernel and lose WIFI completely... I literally need to fastboot the boot.img from rom.zip after every reboot and its driving me crazy.
What do I need to do to prevent the kernel from switching back after reboot? I also tried installing aokp that has a different kernel and it does the same thing. I had a back up( my only backup since my old computer died) with the Fusion Kernel 2.0 with unofficial AOKP Jellybean 4 10 01 on it and i have no current issues with this build besides the video glitches
Sent from my HTC One S using xda app-developers app
Does that make more sense
Sent from my HTC One S using xda app-developers app
So you're saying that without intentionally flashing the fusion kernel it is reflashing itself every time you reboot? Doesn't sound right..
Delete the fusion kernel zip from your phone then reflash the Rom, forget about the kernel.
Sent from my HTC One S using xda app-developers app
Yeah so I've deleted the fusion zip from the SD card, but its installed in the current rom(aokp 01 10) then I follow the installation instructions for both cm 10 nightly 10 09 and aokp 10 08 as usual .... I've tried flashing the boot.iMG in fastboot first then flashing the rom.zip and also flashing the rom.zip then fastboot the boot.img .... the new kernel is there until I reboot and them fusion reappears as the installed kernel and no more Wi-Fi
Sent from my HTC One S using xda app-developers app
2Tone5 said:
Yeah so I've deleted the fusion zip from the SD card, but its installed in the current rom(aokp 01 10) then I follow the installation instructions for both cm 10 nightly 10 09 and aokp 10 08 as usual .... I've tried flashing the boot.iMG in fastboot first then flashing the rom.zip and also flashing the rom.zip then fastboot the boot.img .... the new kernel is there until I reboot and them fusion reappears as the installed kernel and no more Wi-Fi
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Wild guess here... Your'e not confusing fastboot boot boot.img with fastboot flash boot boot.img? The former would just tell your phone to boot using the boot.img, the latter will flash it permanently to the boot partition.
Thanks man.... the things you overlook as a sleep deprived father
Sent from my HTC One S using xda app-developers app
2Tone5 said:
Thanks man.... the things you overlook as a sleep deprived father
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
HEhe yeah, I was just checking how much battery my phone had lost over night and was thoroughly impressed until I realized that it wasnt a very long night
Lol living the dream !
Sent from my HTC One S using xda app-developers app
Thanks for Helping
aokp 8 is just based in v5 you don't need to flash 5 before 8 ... just if you are on a Gingerbread based rom , you need to wipe data as well as format system before flashing ...
Sent from my GT-S5670 using xda premium
soham jambhekar said:
aokp 8 is just based in v5 you don't need to flash 5 before 8 ... just if you are on a Gingerbread based rom , you need to wipe data as well as format system before flashing ...
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
ah.. thanks men :good:
aokp v8 installation need to clear dalvic cache ??
Obviously!!
Sent Via XDA™ Premium
one thing I always do on transition from stock to cm7 based ..
wipe everything !! ( except sd card )
Sent from my GT-S5670 using xda premium
INSTALLATION PROCEDURE
1.Download the rom and copy it to your SD.
2.Go to CWM and wipe data and cache.
3.Select install from zip from sd and navigate to aokp v8.
4.install it and do a data wipe and clear cache.
5.reboot the device
After flashing cm7.2 20130301 nightly builds when I open camera it shows couldn't connect to the camera. What's the problem?
Sent from my GT-S5670 using Tapatalk 2
rajibie said:
After flashing cm7.2 20130301 nightly builds when I open camera it shows couldn't connect to the camera. What's the problem?
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
Do a clean wipe my friend. Cm builds are the stablest build.
Wipe data,cache and dalvick cache before and after flashing rom reboot wait for a minute and then flash gapps,reboot. done.
Rohit02 said:
Do a clean wipe my friend. Cm builds are the stablest build.
Wipe data,cache and dalvick cache before and after flashing rom reboot wait for a minute and then flash gapps,reboot. done.
Click to expand...
Click to collapse
I know that. Already I have done it several times. But result is same. In cm10.1 and other custom rom it's work fine.
Sent from my GT-S5670 using Tapatalk 2
rajibie said:
After flashing cm7.2 20130301 nightly builds when I open camera it shows couldn't connect to the camera. What's the problem?
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
Reflash it again
With
Wipe data wipe cache wipe dalvik cache ......format system then mount system then flash and reboot then check if its working or not
Came from the best galaxy called fit
!!!!!!!
My favorite roms : -
1)Cm10.1.3 by yaj(like a boss)
2)GDX #3+ kernel (by Superman): best cm7 rom till now
3)MIUI v3 (by adityaf): sexiest of all roms
4)Mini cm7(by Superman): simple smooth and fast
5)Mini cm10 #4(by Superman): Best 4.1
Did u flashed the correct n specified gapps? Otherwise download google camera.
Sent from my GT-S5830 using xda app-developers app