Hello, I need help rooting my xperia miro (st23i) with 11.0.A.5.5 firmware, but I need it explained with details. I know that there's already open theme for it, but in it it says that I should have my device rooted previosly on firmware 11.0.A.1.0 and my device is already updated to 11.0.A.5.5. I commented in that theme but it seems that the audience doesn't see the "little" comments, so I opened a new theme.
TNX in advanced
whitenig said:
Hello, I need help rooting my xperia miro (st23i) with 11.0.A.5.5 firmware, but I need it explained with details. I know that there's already open theme for it, but in it it says that I should have my device rooted previosly on firmware 11.0.A.1.0 and my device is already updated to 11.0.A.5.5. I commented in that theme but it seems that the audience doesn't see the "little" comments, so I opened a new theme.
TNX in advanced
Click to expand...
Click to collapse
If you have had root in 11.0.A.2.10 firmware, follow these steps: http://forum.xda-developers.com/showthread.php?t=2014188
If you do not have success, you have to downgrade to firmware 11.0.A.2.10 with flashtools.
If I helped, press thanks button :good:
Regards,
Jorge Moreira
OK, I downgraded, and now how to root it on the downgraded version?
whitenig said:
OK, I downgraded, and now how to root it on the downgraded version?
Click to expand...
Click to collapse
Now do the method (version 18) of user Bin4ry : http://forum.xda-developers.com/showthread.php?t=1886460
And now stay with root.
After the recovery created by member srl3gx : http://forum.xda-developers.com/showthread.php?t=2009300
Kind regards,
Jorge Moreira
If I helped press thanks button. :good:
Is it important that I root it with v18? if not, I already tried rooting it with v17 and it wasn't succesful. it shows me some error: permission denied: are you root?, that the process finishes and a restart my device and i'm not root.
whitenig said:
Is it important that I root it with v18? if not, I already tried rooting it with v17 and it wasn't succesful. it shows me some error: permission denied: are you root?, that the process finishes and a restart my device and i'm not root.
Click to expand...
Click to collapse
At the time I could with version 13, right the first time.
I uploaded this version: http://www36.zippyshare.com/v/26969594/file.html
If the first fails, try several times.
Kind regards,
Jorge Moreira
If I helped, press thanks button.
Dude, very much tnx, i'm faceing this problem for 2 months. Seems that my phone works with v18 and not with v17. Plz stay online so u can help me with other stuff like recovery installing and similar
whitenig said:
Dude, very much tnx, i'm faceing this problem for 2 months. Seems that my phone works with v18 and not with v17. Plz stay online so u can help me with other stuff like recovery installing and similar
Click to expand...
Click to collapse
I'm standing here.
What can help, feel free.
Kind regards,
Jorge Moreira
do u have xperia miro or other device?
whitenig said:
do u have xperia miro or other device?
Click to expand...
Click to collapse
I have Xperia Miro and ZTE Racer
will the root remain if I install CyanogenMod rom via clockworkmod recovery?
whitenig said:
will the root remain if I install CyanogenMod rom via clockworkmod recovery?
Click to expand...
Click to collapse
To get the CM, you have to follow the steps exactly, this thread: http://forum.xda-developers.com/showthread.php?t=1997251
You need unlock the bootloader.
Kind regards,
Jorge Moreira
my question was wether or not my phone will remain root if i flashed it with cm10. btw i know how to flash it with cm10 and i already begun, so the question is will it remain root.
ps: i'm now waiting the device to boot up for very long time on the screen where a blue line is making circles and the cm logo is in the middle
It looks like it's stuck on this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help!
Enter recovery and flash rom again .
Cm10 has root access by default.
I flashed it one time, why should it work the second time?
whitenig said:
I flashed it one time, why should it work the second time?
Click to expand...
Click to collapse
What have you got to lose?
Did you fastboot the fxp 151 kernel first? Also did you replace it in the .zip folder of the fxp 152 before flashing rom?
Hit Thanks if I helped you!
i didn't do neither of these. can u give me the kernel file so i can flash it?
Look in this fxp development thread, go a few pages back, a user (steam I think) has upped the boot.img
http://forum.xda-developers.com/showthread.php?t=1997251
Sent from my ST21a
sometimes it boots up after flashing and it stops after a few reboots. then i flash it again a few times and it boots up a few times also. btw i'm now downdating the cm10 and i want to ask if the flashing of boot.img improves also the freezes in the cm10 as it improves the booting?
Related
XPERIA MIRO RECOVERY DEVELOPMENT
HEY GUYS
all the updates on recovery development for xperia miro would be here so plz follow the thread any suggestions and help would be appreciated.
first of all i need stock recovery.img so plz any one do one of these steps and give me the recovery.img
Extract this file and put it into your android /system/bin and give 755 permision for recovery, run in by command "/system/bin/recovery"
here is the file- recovery.rar here : http://forum.xda-developers.com/attachment.php?attachmentid=1480937&d=1352889359
Basically u need adb/android SDK before proceed.
[WITH ROOT ACCESS]
[+] Dump/copy recovery.img
Code:
Command prompt :
> adb shell
> su
> dd if=/dev/block/mmcblk0p4 of=/sdcard/recovery.img
[WITHOUT ROOT ACCESS]
Currently only /system is usable
Code:
1) Android SDK (just need adb)
2) Download busybox
3) Command prompt :
> adb push busybox /data/local/busybox
> adb shell
> cd /sdcard/
> chmod 755 /data/local/busybox
> /data/local/busybox tar cvf sysdump.tar /system
4) Ignore tar: error exit delayed from previous errors'. Is done correctly.
i could have done more work but i don't have the device you could also help me by donating me to buy a miro here
Reserved +1
Cant i try with terminal emulator??
Sent from my ST23i using xda premium
refly said:
Cant i try with terminal emulator??
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
No.
Terminal Emulator cannot do this.
Here is the file. :victory:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I await more news.
Regards,
Jorge Moreira
No news?
Jorge Moreira said:
No news?
Click to expand...
Click to collapse
Currently we are downloading CM9 source.
We will now build CWM from source
Slow internet speed so you have to wait at least 1 week...
HIT THANKS IF I HELPED YOU IN ANY WAY OR IF I WAS RIGHT BECOZ IT ENCOURAGES ME:thumbup:
many thanks..i hope you can do it..:good:
donate at least something to those who do the work..i m gonna contribute something.:good:
rishabh.raj37 said:
Currently we are downloading CM9 source.
We will now build CWM from source
Slow internet speed so you have to wait at least 1 week...
HIT THANKS IF I HELPED YOU IN ANY WAY OR IF I WAS RIGHT BECOZ IT ENCOURAGES ME:thumbup:
Click to expand...
Click to collapse
Hi,
It does not hurt.
We wait, what matters is what works!
We eagerly await.
Reagdsr,
Jorge Moreira
50 %
the source is downloaded 50 % so assuming at this rate by this week i'll have the sources ready and then cwm by next week hopefully
How to root in new firmware xxx5.5??
I have trouble root my device
I have been trying su_bin4ry 13/15
Help please
Sent from my ST23i using xda premium
refly said:
How to root in new firmware xxx5.5??
I have trouble root my device
I have been trying su_bin4ry 13/15
Help please
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
But you do not have root on your smartphone?
I'm afraid miro don't have recovery partition. newer android device store the recovery stuff inside the kernel ramdisk. thus, if we want a cwm on newer android device, we should build a custom kernel. there's a trick used in sola to install custom recovery without installing custom kernel but I doubt that trick will work on miro/tipo since our init.rc is a lil different with sola.
kurotsugi said:
I'm afraid miro don't have recovery partition. newer android device store the recovery stuff inside the kernel ramdisk. thus, if we want a cwm on newer android device, we should build a custom kernel. there's a trick used in sola to install custom recovery without installing custom kernel but I doubt that trick will work on miro/tipo since our init.rc is a lil different with sola.
Click to expand...
Click to collapse
err..this is bad news..to build a custom kernel i dont know if we have someone..i wish nobodyatall buys this phone..oe of the best x8 developer i ever seen..
well...we don't have to build the entire kernel. I mean, we still can use the zImage taken from stock kernel but we should build our own ramdisk with cwm inside it. I know that kernel development isn't easy. my old sgy need more than 6 months till it get it's first custom kernel.
actualy info @ recovery from OP is incorrect for this device
recovery released on cm10 thread
kang and enjoy!
FXP said:
actualy info @ recovery from OP is incorrect for this device
recovery released on cm10 thread
kang and enjoy!
Click to expand...
Click to collapse
Hello,
Thank you for your information, I didn't know FXP was supporting miro.
Where is the CM10 thread?
EDIT: sorry i've found it here
But is cwm included into it?
LoveForEver said:
Hello,
Thank you for your information, I didn't know FXP was supporting miro.
Where is the CM10 thread?
EDIT: sorry i've found it here
But is cwm included into it?
Click to expand...
Click to collapse
yes..he told that recovery is included with the kernel..you have to flash kernel first and then the rom..OMG..simply amazing a big thanks to FXP and all from his team..
i cant flash anything yet cause i have network sim lock..but i wait a bit.:good:
CM10 isn't avalaible yet for miro
FXP 147 has not been released
ayushrox said:
the source is downloaded 50 % so assuming at this rate by this week i'll have the sources ready and then cwm by next week hopefully
Click to expand...
Click to collapse
Is going well?
I am eagerly waiting.
regards,
Jorge Moreira
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Here !
Click to expand...
Click to collapse
Enjoy !
Credits:
*abcdjdj for helping in every step !
*Sony
*Me !
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
abcdjdj said:
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
Click to expand...
Click to collapse
yeah also helpless locked bootloader users ! :angel:
I Can install in my ST23a or is only for ST23i??????????????
monsluid said:
I Can install in my ST23a or is only for ST23i??????????????
Click to expand...
Click to collapse
Its for ST23i but give it a try on ST23a !
P.S. Use flashtool if it doesnt work !
Can I flash it over cm10
Sent from my ST23i using xda premium
Cm10 uses fxp's custom kernel ! So you cant flash it over cm10..
Sent from my ST23i using xda app-developers app
zeetwo-raj said:
Can I flash it over cm10
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
Not sure if this will work, but you can try this:
Flash the flashable stock ROM, when it's done, turn your phone of, connect it to the pc, and flash the stock kernel.sin.
It's in the FTF files, you can extract it from there. That's the only way I think you could fix your phone as fast as possible. Also, when flashing this stock ROM you must format system and do a wipe data/factory reset, like usual.
If you feel less internal memory;
If you feel that your internal memory is LOW after clean installation,
install a root browser and navigate to the /Data folder and delete ALL of the Lost+Found folder !
Tried by: Gamer649
Reviews are welcomed !
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Killawave said:
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Click to expand...
Click to collapse
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
ShivangDave said:
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
Click to expand...
Click to collapse
U can put cwm files in rom so it will installed automatically when u install rom :good:
nishuy21 said:
U can put cwm files in rom so it will installed automatically when u install rom :good:
Click to expand...
Click to collapse
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Killawave said:
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Click to expand...
Click to collapse
will release a gaming ROM soon ! still in alpha stage ! but having great progress !
---Link Updated---
11.0.5.8 version can be found here:
http://forum.xda-developers.com/showthread.php?t=2287627
Thanks for this... Will try later.. DOWNLOADING....
Broken Links are fixed and updated ! All the ROMs and Kernels provided by me can be found by clicking on that link or here ! Thank you for your support
All the bugs or queries will be solved after completing cm11 aka Kitkat Project
Stepwise Instructions please!
ShivangDave said:
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Enjoy !
Click to expand...
Click to collapse
I would heartily like to request you to provide stepwise instructions on how to flash it so that any beginner may gain confidence oh how to do it. Thank you.
When i flashed my friend's XPERIA J (JLO) to MIUI from official JB .32 i faced with no network/gsm problem.
Then I do a small research and read that I must install custom rom on ICS fw only.
There's actually a way to recover gsm without downrading and doing stuff from begining
Pre's:
- You need UNLOCKED bootloader to change baseband[ ! ]
OPTION 1:
- Download official ICS fw (such as for ex. ST26i_11.0.A.7.5_CE.ftf)
- Open up flashtool
- Connect device in flashmode ([vol -] + [usb])
- Select directory where you have ics fw
- Exclude the flashing parameters like below to flash only baseband:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Click flash and wait
- Now you have to fastboot flash again boot.img of desired rom and/or rom.
- Reboot device and wait again to boot-up.
- Done, you should have gsm.
OPTION2:
! only for ST26i !
- Download baseband only package witch I created here
- Flash via flashtool in flashmode
- Flash again rom's boot.img and/or whoole rom.
- Wipe
- Reboot device
- Done
OK, i hope it will be usefull in any kind
Regards.
nvm
So, I'm using CM 10, will this work on changing the baseband? Since my baseband is stated "Unknown."
Sent From FXP 231 CM 10 Xperia J
@glrhn
I have this problem on my st21i!what can I do?
Sent from my ST21i using xda app-developers app
A billion thanks dude. It worked for my Xperia J on lozo's ParanoidAndroid.
some kid asked that...
glrhn said:
So, I'm using CM 10, will this work on changing the baseband? Since my baseband is stated "Unknown."
Sent From FXP 231 CM 10 Xperia J
@glrhn
Click to expand...
Click to collapse
what does changing baseband do.?
sory..am a noob..!
Baseband is a part of rom wich depend on gsm connections, it needs to be updated for newer roms witch you can do the way I described to jump directly to latest customs without messing with flashing whole firmware
I have Tipo SS
It did not work for me
Thanks a ton for the info. It worked for me.
Sent from my JLo via XDA-App
Mudx said:
It worked for me
Click to expand...
Click to collapse
Which model mobile and which ROM do you have bro?
Naney said:
Which model mobile and which ROM do you have bro?
Click to expand...
Click to collapse
I have Xperia J and I am using lozo's CM10 based Fljótur Rom. Hope this helps.
Not working for me (ST23i) too, using 11.0.A.5.5 Europe branding. Whole firmware or only baseband, after flashing CM10 baseband unknown
MrCzAjNiK said:
When i flashed my friend's XPERIA J (JLO) to MIUI from official JB .32 i faced with no network/gsm problem.
Then I do a small research and read that I must install custom rom on ICS fw only.
There's actually a way to recover gsm without downrading and doing stuff from begining
Pre's:
- You need UNLOCKED bootloader to change baseband[ ! ]
OPTION 1:
- Download official ICS fw (such as for ex. ST26i_11.0.A.7.5_CE.ftf)
- Open up flashtool
- Connect device in flashmode ([vol -] + [usb])
- Select directory where you have ics fw
- Exclude the flashing parameters like below to flash only baseband:
- Click flash and wait
- Now you have to fastboot flash again boot.img of desired rom and/or rom.
- Reboot device and wait again to boot-up.
- Done, you should have gsm.
OPTION2:
! only for ST26i !
- Download baseband only package witch I created here
- Flash via flashtool in flashmode
- Flash again rom's boot.img and/or whoole rom.
- Wipe
- Reboot device
- Done
OK, i hope it will be usefull in any kind
Regards.
Click to expand...
Click to collapse
I think the best way is to flash ics firmware .75 and wait that rom boot up ,then you turn off phone and flash boot.img. Just flashing baseband will take time that rom set up... if rom isnt setted up that means when you will enter to cwm and go flashing cm10,phone will just reboot...
2010matej said:
I think the best way is to flash ics firmware .75 and wait that rom boot up ,then you turn off phone and flash boot.img. Just flashing baseband will take time that rom set up... if rom isnt setted up that means when you will enter to cwm and go flashing cm10,phone will just reboot...
Click to expand...
Click to collapse
yes, exactly, flashed baseband alone and phone just rebooting......but with ics .75 still have no luck , nevermind ......
I present to you
Rooted & Deodexed Sony stock rom
Dear Xperia J users,
This rom is rooted, deodexed and zipaligned JB 4.1.2 stock (11.2.A.0.33) firmware. The deodexed rom should solve all problems with mods from themes & apps section. Zip include just deodexed app and framework folder which will replace odexed one,so you need to have preinstalled original firmware!
I hope you enjoy the Sony stock rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
==Features==
- Pre-rooted with latest SuperSU (forgot to add xbin files...flash this: https://www.mediafire.com/download/nr4oxprop5c252o/root_xperia_signed.zip)
- Updated system apps until 1.12.2013 (Include Google Play Store)
- Fully deodexed
- Zipaligned at boot
Installation:
0. You need to have installed stock rom 11.2.A.0.33 (.31) --> http://forum.xda-developers.com/showthread.php?t=2385526
1. Install CWM recovery
2. Copy deodexed firmware zip to SD Card
3. Enter to CWM
4. Do a (factory reset) & Wipe Dalvik Cache
5. Flash zip
6. Reboot and enjoy
== Rooted & Deodexed Stock firmware = Download ==
11.2.A.0.33
11.2.A.0.31
[Complete Guide] What is Odex and Deodex ROM?
Nice one, will give this a try later today.
Thanks for working on it 2010matej.
2cans1string said:
Nice one, will give this a try later today.
Thanks for working on it 2010matej.
Click to expand...
Click to collapse
Hehe, It takes me 2 days to deodex it hehe, I try about 20 option for deodexing, no one works. Just dsixda kitchen with cygwin works great! )
Did you change SD INTERNAL to SD EXTERNAL in this ROM?
Eduardo C. said:
Did you change SD INTERNAL to SD EXTERNAL in this ROM?
Click to expand...
Click to collapse
Nothing was changed,remowed! I just deodex it!:laugh:
Atlast this is what I was waiting for.. how about the RAM?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Bubash said:
Atlast this is what I was waiting for.. how about the RAM?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Click to expand...
Click to collapse
I'm on custom rom now. "How I remember" I have 175mb free
Good stuff..
first rom on my xj past 4500k on antutu, and 2600 in quadrant.
Nice work matej
2cans1string said:
Good stuff..
first rom on my xj past 4500k on antutu, and 2600 in quadrant.
Nice work matej
Click to expand...
Click to collapse
Haha thanks man Make a thread with this score,and lets see how will people react :laugh:
Cwm for xj jb? Ubl-ed
nevadasaga said:
Cwm for xj jb? Ubl-ed
Click to expand...
Click to collapse
Not yet,maybe newer... I ask @krabappel2548 to help us,he own xperia z and they made cwm for xz locked bootloader...
2010matej said:
Not yet,maybe newer... I ask @krabappel2548 to help us,he own xperia z and they made cwm for xz locked bootloader...
Click to expand...
Click to collapse
:good: :good: :good:
Do I need to wipe data before installation?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Good job.I install AVD rom that is also deodexed in version 11.2.A.0.31 but the version of "ArdhiArt" is fake.But it is a usefull post for those that have stock rom installed.Keep up with the good work.
Bubash said:
Do I need to wipe data before installation?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Click to expand...
Click to collapse
No
Sent from my ST23i using xda premium
Install process CWM on 0.31
Matej Dude,
Thanks for providing such great ROM and that too on latest Firmware..
I am downloading this and will also test AVD ROM soon ..
Will try to let you know the outcome.
Just wanted to tell you that in the original post you have only written "step 2. Install CWM"
that step itself needs a lot .. I found this thread for the same http://forum.xda-developers.com/showthread.php?t=2333078
or is there a CWM for LBL on JB that I may have missed ?
kapil.git said:
Matej Dude,
Thanks for providing such great ROM and that too on latest Firmware..
I am downloading this and will also test AVD ROM soon ..
Will try to let you know the outcome.
Just wanted to tell you that in the original post you have only written "step 2. Install CWM"
that step itself needs a lot .. I found this thread for the same http://forum.xda-developers.com/showthread.php?t=2333078
or is there a CWM for LBL on JB that I may have missed ?
Click to expand...
Click to collapse
Link you posted is correct link!
CWM on 0.31
2010matej said:
Link you posted is correct link!
Click to expand...
Click to collapse
Yes , I found this link working and was able to get CWM recovery on 0.31
though I have to flash in and out .75 and .31 kernels
Ok If I leave this link aside . and full flash 0.31 ROM and then Root with Doomlord kit.
how do I get CWM for flashing your ROM
really want to try this awesome Deodexed ROM.
kapil.git said:
Yes , I found this link working and was able to get CWM recovery on 0.31
though I have to flash in and out .75 and .31 kernels
Ok If I leave this link aside . and full flash 0.31 ROM and then Root with Doomlord kit.
how do I get CWM for flashing your ROM
really want to try this awesome Deodexed ROM.
Click to expand...
Click to collapse
For cwm use link you posted...
2010matej said:
For cwm use link you posted...
Click to expand...
Click to collapse
thanks man.. there's a lot of struggle if you have a locked bootloader.
I am really thinking of unlocking it.. have used my XJ ( and android OS ) for a good 6 months now. just taken TA backup of my device.
now really in a mood to push this device to its limits.
many thanks for keeping the XJ dev scene alive . FXP declared this a legacy set. I guess only high end devices attract developers now a days.
Hi members of XDA,
I created a preRoot + dual recovery.
DO NOT FLASH THIS IF YOU DONT KNOW WHAT YOU DO, DONT BLAME ME IF YOUR DEVICE EXPLODE
whath do you need?
A)D2502 model
B) 4.4 or 5.0 firmware with funtional recovery (TWRP).
opcional:
C) conect your device to your pc and install yours drivers
Steps:
1) Put "D2502_19.4.A.0.182 - PreRoot + XZDual recovery", in your internal memory.
2) Reboot in to recovery TWRP (yes only TWRP)
3) Make a BackUp (optional)
4) Wipe caches
5) Flash D2502_19.4.A.0.182 - PreRoot + XZDual recovery ( flash with TWRP)
6)done!
Download: https://www.androidfilehost.com/?fid=24052804347823622
Note:
If you need it for another model, tell me.
If you need another mirror link, tell me
If you put it on another forum/web, put the original thread and rom link, thanks.
help
i need 4.4 or 5.0 firmware with funtional recovery (TWRP)
guide for me
luongxuancong77 said:
i need 4.4 or 5.0 firmware with funtional recovery (TWRP)
guide for me
Click to expand...
Click to collapse
Download T2U.xxx.installer.zip and install it (4.4 or 5.0)
http://nut.xperia-files.com
help
How to install
T2U.xxx.installer.zip
luongxuancong77 said:
How to install
T2U.xxx.installer.zip
Click to expand...
Click to collapse
It should works http://forum.xda-developers.com/showthread.php?t=3145235
help
very hard
please guide for me how to root c3 d2502 lolilop 5.1.1
First u have to downgrade to 5.02 then root ur mobile via kingroot after that install the recovery n flash this pre rooted zip
If you need to keep asking and not bother to try to understand what has been posted, I strongly recommend you stick to unrooted until you get a grasp of what is going on. Otherwise you're a danger to your phone >.>
Does it work on d2533?
Sent from my D2533 using XDA Free mobile app
aizatt55 said:
Does it work on d2533?
Sent from my D2533 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3208673
Thnks
Sent from my D2533 using XDA Free mobile app
AutumQueen92 said:
If you need to keep asking and not bother to try to understand what has been posted, I strongly recommend you stick to unrooted until you get a grasp of what is going on. Otherwise you're a danger to your phone >.>
Click to expand...
Click to collapse
Hlo dude i hav created a customized zip in kitchen but i cant flash it can u help me??
cezer kiran said:
Hlo dude i hav created a customized zip in kitchen but i cant flash it can u help me??
Click to expand...
Click to collapse
I've got no idea what kitchen are you making zips in or what's that zip all about.
AutumQueen92 said:
I've got no idea what kitchen are you making zips in or what's that zip all about.
Click to expand...
Click to collapse
Im using dsixda's android kitchen i have extracted system.img and boot.img from stock rom for d2502 and added su supoort and deoxed and removed some apps everything goes fine but while flashing this zip im getting errors i think the errors arr due to updater script can u help me?
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
In cwm it shows status 1 error while flashing this zip
cezer kiran said:
Im using dsixda's android kitchen i have extracted system.img and boot.img from stock rom for d2502 and added su supoort and deoxed and removed some apps everything goes fine but while flashing this zip im getting errors i think the errors arr due to updater script can u help me?
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
In cwm it shows status 1 error while flashing this zip
Click to expand...
Click to collapse
I'm not that tech savvy enough to do all this stuff, you might want to look here for errors.
I'm not the dev, and followed another person's guide to install recovery so I can't help with the guide in this thread.
AutumQueen92 said:
I'm not that tech savvy enough to do all this stuff, you might want to look here for errors.
I'm not the dev, and followed another person's guide to install recovery so I can't help with the guide in this thread.
Click to expand...
Click to collapse
Have any idea which xperia c3 owner is capable of helping me
cezer kiran said:
Have any idea which xperia c3 owner is capable of helping me
Click to expand...
Click to collapse
Nope.
how i go to twrp?
rodra_mishu said:
how i go to twrp?
Click to expand...
Click to collapse
Do you have dual recovery in you Phone?? Just go to "NDR utils", choose Twrp and reboot to primary recovery.
If not, search in this forum "recovery for c3"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how to install dual recovery?and give me link