XPERIA MIRO RECOVERY DEVELOPMENT
HEY GUYS
all the updates on recovery development for xperia miro would be here so plz follow the thread any suggestions and help would be appreciated.
first of all i need stock recovery.img so plz any one do one of these steps and give me the recovery.img
Extract this file and put it into your android /system/bin and give 755 permision for recovery, run in by command "/system/bin/recovery"
here is the file- recovery.rar here : http://forum.xda-developers.com/attachment.php?attachmentid=1480937&d=1352889359
Basically u need adb/android SDK before proceed.
[WITH ROOT ACCESS]
[+] Dump/copy recovery.img
Code:
Command prompt :
> adb shell
> su
> dd if=/dev/block/mmcblk0p4 of=/sdcard/recovery.img
[WITHOUT ROOT ACCESS]
Currently only /system is usable
Code:
1) Android SDK (just need adb)
2) Download busybox
3) Command prompt :
> adb push busybox /data/local/busybox
> adb shell
> cd /sdcard/
> chmod 755 /data/local/busybox
> /data/local/busybox tar cvf sysdump.tar /system
4) Ignore tar: error exit delayed from previous errors'. Is done correctly.
i could have done more work but i don't have the device you could also help me by donating me to buy a miro here
Reserved +1
Cant i try with terminal emulator??
Sent from my ST23i using xda premium
refly said:
Cant i try with terminal emulator??
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
No.
Terminal Emulator cannot do this.
Here is the file. :victory:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I await more news.
Regards,
Jorge Moreira
No news?
Jorge Moreira said:
No news?
Click to expand...
Click to collapse
Currently we are downloading CM9 source.
We will now build CWM from source
Slow internet speed so you have to wait at least 1 week...
HIT THANKS IF I HELPED YOU IN ANY WAY OR IF I WAS RIGHT BECOZ IT ENCOURAGES ME:thumbup:
many thanks..i hope you can do it..:good:
donate at least something to those who do the work..i m gonna contribute something.:good:
rishabh.raj37 said:
Currently we are downloading CM9 source.
We will now build CWM from source
Slow internet speed so you have to wait at least 1 week...
HIT THANKS IF I HELPED YOU IN ANY WAY OR IF I WAS RIGHT BECOZ IT ENCOURAGES ME:thumbup:
Click to expand...
Click to collapse
Hi,
It does not hurt.
We wait, what matters is what works!
We eagerly await.
Reagdsr,
Jorge Moreira
50 %
the source is downloaded 50 % so assuming at this rate by this week i'll have the sources ready and then cwm by next week hopefully
How to root in new firmware xxx5.5??
I have trouble root my device
I have been trying su_bin4ry 13/15
Help please
Sent from my ST23i using xda premium
refly said:
How to root in new firmware xxx5.5??
I have trouble root my device
I have been trying su_bin4ry 13/15
Help please
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
But you do not have root on your smartphone?
I'm afraid miro don't have recovery partition. newer android device store the recovery stuff inside the kernel ramdisk. thus, if we want a cwm on newer android device, we should build a custom kernel. there's a trick used in sola to install custom recovery without installing custom kernel but I doubt that trick will work on miro/tipo since our init.rc is a lil different with sola.
kurotsugi said:
I'm afraid miro don't have recovery partition. newer android device store the recovery stuff inside the kernel ramdisk. thus, if we want a cwm on newer android device, we should build a custom kernel. there's a trick used in sola to install custom recovery without installing custom kernel but I doubt that trick will work on miro/tipo since our init.rc is a lil different with sola.
Click to expand...
Click to collapse
err..this is bad news..to build a custom kernel i dont know if we have someone..i wish nobodyatall buys this phone..oe of the best x8 developer i ever seen..
well...we don't have to build the entire kernel. I mean, we still can use the zImage taken from stock kernel but we should build our own ramdisk with cwm inside it. I know that kernel development isn't easy. my old sgy need more than 6 months till it get it's first custom kernel.
actualy info @ recovery from OP is incorrect for this device
recovery released on cm10 thread
kang and enjoy!
FXP said:
actualy info @ recovery from OP is incorrect for this device
recovery released on cm10 thread
kang and enjoy!
Click to expand...
Click to collapse
Hello,
Thank you for your information, I didn't know FXP was supporting miro.
Where is the CM10 thread?
EDIT: sorry i've found it here
But is cwm included into it?
LoveForEver said:
Hello,
Thank you for your information, I didn't know FXP was supporting miro.
Where is the CM10 thread?
EDIT: sorry i've found it here
But is cwm included into it?
Click to expand...
Click to collapse
yes..he told that recovery is included with the kernel..you have to flash kernel first and then the rom..OMG..simply amazing a big thanks to FXP and all from his team..
i cant flash anything yet cause i have network sim lock..but i wait a bit.:good:
CM10 isn't avalaible yet for miro
FXP 147 has not been released
ayushrox said:
the source is downloaded 50 % so assuming at this rate by this week i'll have the sources ready and then cwm by next week hopefully
Click to expand...
Click to collapse
Is going well?
I am eagerly waiting.
regards,
Jorge Moreira
Related
Hello, I need help rooting my xperia miro (st23i) with 11.0.A.5.5 firmware, but I need it explained with details. I know that there's already open theme for it, but in it it says that I should have my device rooted previosly on firmware 11.0.A.1.0 and my device is already updated to 11.0.A.5.5. I commented in that theme but it seems that the audience doesn't see the "little" comments, so I opened a new theme.
TNX in advanced
whitenig said:
Hello, I need help rooting my xperia miro (st23i) with 11.0.A.5.5 firmware, but I need it explained with details. I know that there's already open theme for it, but in it it says that I should have my device rooted previosly on firmware 11.0.A.1.0 and my device is already updated to 11.0.A.5.5. I commented in that theme but it seems that the audience doesn't see the "little" comments, so I opened a new theme.
TNX in advanced
Click to expand...
Click to collapse
If you have had root in 11.0.A.2.10 firmware, follow these steps: http://forum.xda-developers.com/showthread.php?t=2014188
If you do not have success, you have to downgrade to firmware 11.0.A.2.10 with flashtools.
If I helped, press thanks button :good:
Regards,
Jorge Moreira
OK, I downgraded, and now how to root it on the downgraded version?
whitenig said:
OK, I downgraded, and now how to root it on the downgraded version?
Click to expand...
Click to collapse
Now do the method (version 18) of user Bin4ry : http://forum.xda-developers.com/showthread.php?t=1886460
And now stay with root.
After the recovery created by member srl3gx : http://forum.xda-developers.com/showthread.php?t=2009300
Kind regards,
Jorge Moreira
If I helped press thanks button. :good:
Is it important that I root it with v18? if not, I already tried rooting it with v17 and it wasn't succesful. it shows me some error: permission denied: are you root?, that the process finishes and a restart my device and i'm not root.
whitenig said:
Is it important that I root it with v18? if not, I already tried rooting it with v17 and it wasn't succesful. it shows me some error: permission denied: are you root?, that the process finishes and a restart my device and i'm not root.
Click to expand...
Click to collapse
At the time I could with version 13, right the first time.
I uploaded this version: http://www36.zippyshare.com/v/26969594/file.html
If the first fails, try several times.
Kind regards,
Jorge Moreira
If I helped, press thanks button.
Dude, very much tnx, i'm faceing this problem for 2 months. Seems that my phone works with v18 and not with v17. Plz stay online so u can help me with other stuff like recovery installing and similar
whitenig said:
Dude, very much tnx, i'm faceing this problem for 2 months. Seems that my phone works with v18 and not with v17. Plz stay online so u can help me with other stuff like recovery installing and similar
Click to expand...
Click to collapse
I'm standing here.
What can help, feel free.
Kind regards,
Jorge Moreira
do u have xperia miro or other device?
whitenig said:
do u have xperia miro or other device?
Click to expand...
Click to collapse
I have Xperia Miro and ZTE Racer
will the root remain if I install CyanogenMod rom via clockworkmod recovery?
whitenig said:
will the root remain if I install CyanogenMod rom via clockworkmod recovery?
Click to expand...
Click to collapse
To get the CM, you have to follow the steps exactly, this thread: http://forum.xda-developers.com/showthread.php?t=1997251
You need unlock the bootloader.
Kind regards,
Jorge Moreira
my question was wether or not my phone will remain root if i flashed it with cm10. btw i know how to flash it with cm10 and i already begun, so the question is will it remain root.
ps: i'm now waiting the device to boot up for very long time on the screen where a blue line is making circles and the cm logo is in the middle
It looks like it's stuck on this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help!
Enter recovery and flash rom again .
Cm10 has root access by default.
I flashed it one time, why should it work the second time?
whitenig said:
I flashed it one time, why should it work the second time?
Click to expand...
Click to collapse
What have you got to lose?
Did you fastboot the fxp 151 kernel first? Also did you replace it in the .zip folder of the fxp 152 before flashing rom?
Hit Thanks if I helped you!
i didn't do neither of these. can u give me the kernel file so i can flash it?
Look in this fxp development thread, go a few pages back, a user (steam I think) has upped the boot.img
http://forum.xda-developers.com/showthread.php?t=1997251
Sent from my ST21a
sometimes it boots up after flashing and it stops after a few reboots. then i flash it again a few times and it boots up a few times also. btw i'm now downdating the cm10 and i want to ask if the flashing of boot.img improves also the freezes in the cm10 as it improves the booting?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Behold the TWRP for Karbonn Smart Tab - ST8 and ST10.
Note:
# Strictly NO MIRRORS are allowed!
# DONOT share this Content on any site if you want to share, share the link instead. The People here works hard to make something. So please respect that and donot steal.
# I or anybody else will not be responsible for any kind of brick!
Bugs:
Tell me if any other bug comes around!
Download
WARNING: This recovery is meant only for version one (v1) tabs. If you have a v2 tab DON'T flash it!!
TWRP-2.4.4.0-ST8.zip [Stock Recovery Flashable]
TWRP-2.4.4.0-ST10.zip [Stock Recovery Flashable]
Code:
[B][CENTER][SIZE="5"][COLOR="Blue"]-:Changelog:-[/COLOR][/SIZE][/CENTER][/B]
[FONT="Times New Roman"]Initial Realease - [16-02-13]
- Version 2.4.1.0
- USB Storage Not Working.[COLOR="DarkOrange"][B][FIXED!!][/B][/COLOR]
- Incorrect Resolution.[COLOR="DarkOrange"][B][FIXED!!][/B][/COLOR]
Update2 - [18-03-13]
- Updated to Version 2.4.4.0
- ADB.[COLOR="DarkOrange"][B][FIXED!!][/B][/COLOR][/FONT]
Credits:
* Christian Troy @Slatedroid.com
* Dees Troy and other people @twrP
Well done brother....Can you port this for Smart Tab 10...You already have the Recovery.img and the boot.img...I'm ready to test whenever you want me to...
Re: [Karbonn Smart Tab 8][Recovery] TWRP-2.4.1.0 [16-02-13]
ankitdaruler said:
Well done brother....Can you port this for Smart Tab 10...You already have the Recovery.img and the boot.img...I'm ready to test whenever you want me to...
Click to expand...
Click to collapse
Yep surely. But first i must remove all the bugs listed. Then i'll try for ur device aswell
These power cuts in India wont let me work properly :/
Ozadroid said:
Yep surely. But first i must remove all the bugs listed. Then i'll try for ur device aswell
These power cuts in India wont let me work properly :/
Click to expand...
Click to collapse
Actually for me USB Storage or the resolution isn't that important in Recovery.. If you can please make one for ST10 even if it has such bugs...It would help me(the community in turn) a lot while testing the mods Fuser is sending me to test...:good:
ankitdaruler said:
Actually for me USB Storage or the resolution isn't that important in Recovery.. If you can please make one for ST10 even if it has such bugs...It would help me(the community in turn) a lot while testing the mods Fuser is sending me to test...:good:
Click to expand...
Click to collapse
dont rush bro. i have fixed the resolution problem. building with USB fix. hopefully it works and then i'll build for your device aswell
Update:
Fixed All the bugs. Download the new recovery n flash!
Update: Stock Recovery Flashable Zips Uploaded for both ST8 and ST10
Hello . Thanks for all your work. I have installed TWRP , taken backup and now I am at peasce.
As a sidenote I was looking forward to improved touch response in ST8. But after installing TWRP I am finding that the touch response in the recovery is also similar. This tells me that touch performance may not be a issue with the ROM. Maybe the hardware can do only so much
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
handy5876 said:
Hello . Thanks for all your work. I have installed TWRP , taken backup and now I am at peasce.
As a sidenote I was looking forward to improved touch response in ST8. But after installing TWRP I am finding that the touch response in the recovery is also similar. This tells me that touch performance may not be a issue with the ROM. Maybe the hardware can do only so much
Click to expand...
Click to collapse
Yeah the touch is bad everywhere as the screen is not good!!
TWRP for Karbonn A 9+
Can we have TWRP for Karbonn A9+ smart phone as well?, because CWM developed by one person reported to have some major problems.
Let meknow if you need any files or ROM dump etc !!
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
vpandey said:
Can we have TWRP for Karbonn A9+ smart phone as well?, because CWM developed by one person reported to have some major problems.
Let meknow if you need any files or ROM dump etc !!
Click to expand...
Click to collapse
Give the recovery dump
Sent from my LG-P500 using xda app-developers app
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
@Ozadroid
Can't find a device with similar recovery.fstab...
Can you please compile one for me...
I will give all the files and info about my device...
Please compile one for me...
Thanks a lot for making this for us.
I have successfully flashed it on to my Karbonn ST8.
Ozadroid thanks for the awesome work. But are you working on porting the latest version of TWRP ?
As the thread title say we are currently using TWRP 2.4.1.0 and i the latest version is TWRP 2.4.3.0.
Or is there some issue with the latest version on our ST8 or ST10?
Just asking out of curiosity buddy. I am satisfied with this one too.
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
Saurabh_Joshi said:
Ozadroid thanks for the awesome work. But are you working on porting the latest version of TWRP ?
As the thread title say we are currently using TWRP 2.4.1.0 and i the latest version is TWRP 2.4.3.0.
Or is there some issue with the latest version on our ST8 or ST10?
Just asking out of curiosity buddy. I am satisfied with this one too.
Click to expand...
Click to collapse
Its because of 2 reasons.
* there is not much useful changes in new version and i want to build first cm10 and custom kernel(though this one is tough).
* I m not able to give time for development due to study!
Will inform you guys if I update anything
Ozadroid said:
Give the recovery dump
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Well how to create a recovery.img? because when I type command cat /proc/mtd it show me nothing except "dev: size erasesize name" using terminal emulator
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
vpandey said:
Well how to create a recovery.img? because when I type command cat /proc/mtd it show me nothing except "dev: size erasesize name" using terminal emulator
Click to expand...
Click to collapse
Well bro i wont be able to help you with making recovery for now as i m busy with studies.
Yes, 'cat' commant is used to view only. If u want to dump recovery use 'android partition manager' from play store.
Ozadroid said:
Well bro i wont be able to help you with making recovery for now as i m busy with studies.
Yes, 'cat' commant is used to view only. If u want to dump recovery use 'android partition manager' from play store.
Click to expand...
Click to collapse
Any luck getting this bootable from a uImage_recovery on the SD card instead of only being able to replace the partition? If you can get it bootable by placing it on the SD card then I can probably put together a package for people to unbrick their tablets by ADB.
Re: [Karbonn ST8/ST10][Recovery] TWRP-2.4.1.0 [16-02-13]
fuser-invent said:
Any luck getting this bootable from a uImage_recovery on the SD card instead of only being able to replace the partition? If you can get it bootable by placing it on the SD card then I can probably put together a package for people to unbrick their tablets by ADB.
Click to expand...
Click to collapse
I dont know how to make a uImage. If u can tell me or link me to a tut i can try!
Hi Ozadroid,
Here are the dumps for Karbonn A9+ boot and recovery:
Boot.img ==> http://db.tt/E52fiQxe
Recovery.img==> http://db.tt/pReiv6uz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Here !
Click to expand...
Click to collapse
Enjoy !
Credits:
*abcdjdj for helping in every step !
*Sony
*Me !
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
abcdjdj said:
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
Click to expand...
Click to collapse
yeah also helpless locked bootloader users ! :angel:
I Can install in my ST23a or is only for ST23i??????????????
monsluid said:
I Can install in my ST23a or is only for ST23i??????????????
Click to expand...
Click to collapse
Its for ST23i but give it a try on ST23a !
P.S. Use flashtool if it doesnt work !
Can I flash it over cm10
Sent from my ST23i using xda premium
Cm10 uses fxp's custom kernel ! So you cant flash it over cm10..
Sent from my ST23i using xda app-developers app
zeetwo-raj said:
Can I flash it over cm10
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
Not sure if this will work, but you can try this:
Flash the flashable stock ROM, when it's done, turn your phone of, connect it to the pc, and flash the stock kernel.sin.
It's in the FTF files, you can extract it from there. That's the only way I think you could fix your phone as fast as possible. Also, when flashing this stock ROM you must format system and do a wipe data/factory reset, like usual.
If you feel less internal memory;
If you feel that your internal memory is LOW after clean installation,
install a root browser and navigate to the /Data folder and delete ALL of the Lost+Found folder !
Tried by: Gamer649
Reviews are welcomed !
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Killawave said:
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Click to expand...
Click to collapse
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
ShivangDave said:
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
Click to expand...
Click to collapse
U can put cwm files in rom so it will installed automatically when u install rom :good:
nishuy21 said:
U can put cwm files in rom so it will installed automatically when u install rom :good:
Click to expand...
Click to collapse
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Killawave said:
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Click to expand...
Click to collapse
will release a gaming ROM soon ! still in alpha stage ! but having great progress !
---Link Updated---
11.0.5.8 version can be found here:
http://forum.xda-developers.com/showthread.php?t=2287627
Thanks for this... Will try later.. DOWNLOADING....
Broken Links are fixed and updated ! All the ROMs and Kernels provided by me can be found by clicking on that link or here ! Thank you for your support
All the bugs or queries will be solved after completing cm11 aka Kitkat Project
Stepwise Instructions please!
ShivangDave said:
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Enjoy !
Click to expand...
Click to collapse
I would heartily like to request you to provide stepwise instructions on how to flash it so that any beginner may gain confidence oh how to do it. Thank you.
I present to you
Rooted & Deodexed Sony stock rom
Dear Xperia J users,
This rom is rooted, deodexed and zipaligned JB 4.1.2 stock (11.2.A.0.33) firmware. The deodexed rom should solve all problems with mods from themes & apps section. Zip include just deodexed app and framework folder which will replace odexed one,so you need to have preinstalled original firmware!
I hope you enjoy the Sony stock rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
==Features==
- Pre-rooted with latest SuperSU (forgot to add xbin files...flash this: https://www.mediafire.com/download/nr4oxprop5c252o/root_xperia_signed.zip)
- Updated system apps until 1.12.2013 (Include Google Play Store)
- Fully deodexed
- Zipaligned at boot
Installation:
0. You need to have installed stock rom 11.2.A.0.33 (.31) --> http://forum.xda-developers.com/showthread.php?t=2385526
1. Install CWM recovery
2. Copy deodexed firmware zip to SD Card
3. Enter to CWM
4. Do a (factory reset) & Wipe Dalvik Cache
5. Flash zip
6. Reboot and enjoy
== Rooted & Deodexed Stock firmware = Download ==
11.2.A.0.33
11.2.A.0.31
[Complete Guide] What is Odex and Deodex ROM?
Nice one, will give this a try later today.
Thanks for working on it 2010matej.
2cans1string said:
Nice one, will give this a try later today.
Thanks for working on it 2010matej.
Click to expand...
Click to collapse
Hehe, It takes me 2 days to deodex it hehe, I try about 20 option for deodexing, no one works. Just dsixda kitchen with cygwin works great! )
Did you change SD INTERNAL to SD EXTERNAL in this ROM?
Eduardo C. said:
Did you change SD INTERNAL to SD EXTERNAL in this ROM?
Click to expand...
Click to collapse
Nothing was changed,remowed! I just deodex it!:laugh:
Atlast this is what I was waiting for.. how about the RAM?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Bubash said:
Atlast this is what I was waiting for.. how about the RAM?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Click to expand...
Click to collapse
I'm on custom rom now. "How I remember" I have 175mb free
Good stuff..
first rom on my xj past 4500k on antutu, and 2600 in quadrant.
Nice work matej
2cans1string said:
Good stuff..
first rom on my xj past 4500k on antutu, and 2600 in quadrant.
Nice work matej
Click to expand...
Click to collapse
Haha thanks man Make a thread with this score,and lets see how will people react :laugh:
Cwm for xj jb? Ubl-ed
nevadasaga said:
Cwm for xj jb? Ubl-ed
Click to expand...
Click to collapse
Not yet,maybe newer... I ask @krabappel2548 to help us,he own xperia z and they made cwm for xz locked bootloader...
2010matej said:
Not yet,maybe newer... I ask @krabappel2548 to help us,he own xperia z and they made cwm for xz locked bootloader...
Click to expand...
Click to collapse
:good: :good: :good:
Do I need to wipe data before installation?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Good job.I install AVD rom that is also deodexed in version 11.2.A.0.31 but the version of "ArdhiArt" is fake.But it is a usefull post for those that have stock rom installed.Keep up with the good work.
Bubash said:
Do I need to wipe data before installation?
Phone: Xperia J
ROM: PA 2.57
App: XDA-Developers
Click to expand...
Click to collapse
No
Sent from my ST23i using xda premium
Install process CWM on 0.31
Matej Dude,
Thanks for providing such great ROM and that too on latest Firmware..
I am downloading this and will also test AVD ROM soon ..
Will try to let you know the outcome.
Just wanted to tell you that in the original post you have only written "step 2. Install CWM"
that step itself needs a lot .. I found this thread for the same http://forum.xda-developers.com/showthread.php?t=2333078
or is there a CWM for LBL on JB that I may have missed ?
kapil.git said:
Matej Dude,
Thanks for providing such great ROM and that too on latest Firmware..
I am downloading this and will also test AVD ROM soon ..
Will try to let you know the outcome.
Just wanted to tell you that in the original post you have only written "step 2. Install CWM"
that step itself needs a lot .. I found this thread for the same http://forum.xda-developers.com/showthread.php?t=2333078
or is there a CWM for LBL on JB that I may have missed ?
Click to expand...
Click to collapse
Link you posted is correct link!
CWM on 0.31
2010matej said:
Link you posted is correct link!
Click to expand...
Click to collapse
Yes , I found this link working and was able to get CWM recovery on 0.31
though I have to flash in and out .75 and .31 kernels
Ok If I leave this link aside . and full flash 0.31 ROM and then Root with Doomlord kit.
how do I get CWM for flashing your ROM
really want to try this awesome Deodexed ROM.
kapil.git said:
Yes , I found this link working and was able to get CWM recovery on 0.31
though I have to flash in and out .75 and .31 kernels
Ok If I leave this link aside . and full flash 0.31 ROM and then Root with Doomlord kit.
how do I get CWM for flashing your ROM
really want to try this awesome Deodexed ROM.
Click to expand...
Click to collapse
For cwm use link you posted...
2010matej said:
For cwm use link you posted...
Click to expand...
Click to collapse
thanks man.. there's a lot of struggle if you have a locked bootloader.
I am really thinking of unlocking it.. have used my XJ ( and android OS ) for a good 6 months now. just taken TA backup of my device.
now really in a mood to push this device to its limits.
many thanks for keeping the XJ dev scene alive . FXP declared this a legacy set. I guess only high end devices attract developers now a days.
Hello
This is kernel with touch recovery and it's for both JellyBean and KitKat stock firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS SOFTWARE NEEDS UNLOCKED BOOTLODER
http://unlockbootloader.sonymobile.com/
Flashing instructions:
download the kernel and put in fastboot directory.
Turn OFF your M2 and plug in via USB with VOL+ key pressed. Blue LED should glare.
Open terminal/CMD, go to to dir with boot.img and type:
Code:
fastboot flash boot boot.img
(kernel image name may be different, depending on downloaded version)
When it's done, unplug device and power ON.
Click to expand...
Click to collapse
How to enter Recovery:
when you see the Sony logo and the device vibrate keep tapping/pressing VOLUME- DOWN key
Click to expand...
Click to collapse
How to Root 4.3 - 4.4.2
Install Kernel with CWM above.
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu and save on your SD card
reboot into recovery and flash the supersu package.
reboot your device
How to Root 4.4.4
Flash the newest kernel
Boot to CWM and flash SuperSU
Reboot your device when finished.
/*************************************************************************************/
[D2303]Download for JellyBean 4.3 (.17)https://drive.google.com/file/d/0ByDTUztGLYpWYzd3cTk4VHNISEk/edit?usp=sharing
[D2303]Download for KitKat 4.4.2 (.37)
[D2303]Download for KitKat 4.4.2 (.40)
[D2303][OLD]Download for KitKat 4.4.4 (only RIC disabled)
[D2303][NEW]Download for KitKat 4.4.4 (18.3.1.C.1.13) (RIC disabled + new CM recovery)
[D2305]Download for KitKat 4.4.2 kernel here.
/*************************************************************************************/
KitKat kernel has Sony RIC security turned off by default. So no more worries about /system not-writtable.
No more root problems!
Thanks for DooMLoRD for kernel tools, CyanogenMod and Sony for sources. Me for making this for you.
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* or any bad consequences of using this kernel. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! It's only your decision to make those modifications.
* Every act of accusing me for above will be ignored.
*/
Please don't ask for ETA.
Hit "thanks" button if you appreciate my work. It tells me to carry on with stuff.
Features:
*Touch CWM
*Disabled Sony RIC (easy root)
Is it possible to make ftf of this, so we can use cwm and then flash Kk stok kernel to boot?
Thanks for work it good to see you here
Sent from my D2303
First i want to thank you for your work but i have an issue with your kernel:wifi doesnt turn on. Any idea?thanx for your answer
I'm so sorry to hear that. Someone reported that issue too. I'm going to ask Sony developers what's wrong with their source.
I will do my best to fix it.
lozohcum said:
I'm so sorry to hear that. Someone reported that issue too. I'm going to ask Sony developers what's wrong with their source.
I will do my best to fix it.
Click to expand...
Click to collapse
Can you provide a link of your GitHub repo?
It looks like a problem with modules
Garcia98 said:
Can you provide a link of your GitHub repo?
It looks like a problem with modules
Click to expand...
Click to collapse
I didn't upload source to github yet, my Internet connection is too slow.
Source is available on Sony Developers site.
http://developer.sonymobile.com/dow...es/open-source-archive-for-build-18-0-c-1-13/
I can upload modules, will you test them? I have KitKat installed so I can't test every part of the kernel.
@Garcia98 I uploaded all kernel modules. Link in the first post.
And found this, possible fix for our WiFi (Z1 has identical problem I guess)
http://forum.xda-developers.com/showpost.php?p=48780021&postcount=78
lozohcum said:
I didn't upload source to github yet, my Internet connection is too slow.
Source is available on Sony Developers site.
http://developer.sonymobile.com/dow...es/open-source-archive-for-build-18-0-c-1-13/
I can upload modules, will you test them? I have KitKat installed so I can't test every part of the kernel.
@Garcia98 I uploaded all kernel modules. Link in the first post.
And found this, possible fix for our WiFi (Z1 has identical problem I guess)
http://forum.xda-developers.com/showpost.php?p=48780021&postcount=78
Click to expand...
Click to collapse
First of all sorry for not having answered yesterday, I forgot it xD
As I suspected, in kernel modules there's no WiFi module (wlan.ko), I think that that's the reason why WiFi is not working.
wlan.ko is a link to pronto/pronto_wlan.ko btw
Kitkat kernel with CWM is ready. Confirmed working, I tested on my own device.
But WiFi doesn't work again.
I will try to somehow compile pronto_wlan.ko module.
lozohcum said:
wlan.ko is a link to pronto/pronto_wlan.ko btw
Kitkat kernel with CWM is ready. Confirmed working, I tested on my own device.
But WiFi doesn't work again.
I will try to somehow compile pronto_wlan.ko module.
Click to expand...
Click to collapse
OK, but what does dmesg say about WiFi issue?
Garcia98 said:
OK, but what does dmesg say about WiFi issue?
Click to expand...
Click to collapse
I didn't take any logs because I run out battery, now my xperia is charging. Tomorrow morning I'm moving to another city so it will take me a while to investigate this issue.
It would be different if someone could just take a logcat for me :<
lozohcum said:
I didn't take any logs because I run out battery, now my xperia is charging. Tomorrow morning I'm moving to another city so it will take me a while to investigate this issue.
It would be different if someone could just take a logcat for me :<
Click to expand...
Click to collapse
OK, don't worry.
I keep thinking that this problem is related to modules, Tianchi kernel source code doesn't have any change regarding Pronto nor WiFi modules, however I asked to Abhinav if they have had any kind of problems with WiFi.
BTW, did you compile kernel with toolchain and then packing zImage with ramdisk into boot.img or did you run make bootimg command in Android source code?
Works on D2302 also!
Sent from my D2302 using xda premium
Garcia98 said:
OK, don't worry.
I keep thinking that this problem is related to modules, Tianchi kernel source code doesn't have any change regarding Pronto nor WiFi modules, however I asked to Abhinav if they have had any kind of problems with WiFi.
BTW, did you compile kernel with toolchain and then packing zImage with ramdisk into boot.img or did you run make bootimg command in Android source code?
Click to expand...
Click to collapse
I compiled zImage with linaro toolchain, then I generated dt.img and used Ramdisk from stock and put everything together using mkbooting binary.
When you download sony source it doesn't have option make bootimage because it doesn't have device tree and so on. Just pure kernel source and externals.
RTz_GauRaV said:
Works on D2302 also!
Click to expand...
Click to collapse
does wifi work?
lozohcum said:
I compiled zImage with linaro toolchain, then I generated dt.img and used Ramdisk from stock and put everything together using mkbooting binary.
When you download sony source it doesn't have option make bootimage because it doesn't have device tree and so on. Just pure kernel source and externals.
does wifi work?
Click to expand...
Click to collapse
No Wifi is not working
can ou build cwm kitkat for D2305 too??
sinkadorable said:
can ou build cwm kitkat for D2305 too??
Click to expand...
Click to collapse
Yes but not in this and next week because I have just moved to new flat.
@sinkadorable
send me kernel.sin from D2305 KitKat firmware.
lozohcum said:
@sinkadorable
send me kernel.sin from D2305 KitKat firmware.
Click to expand...
Click to collapse
this from indonsian ftf
https://drive.google.com/file/d/0Bz_5OGn0GjFTSG5FN0xTaGZqdGM/edit?usp=sharing
Thanks. I've been waiting for this one, because I'm too lazy to build it myself... XD