Nibbles Kernel v0.1.4
Base: Team Fah-Q's Lightning Zap (Original Version)
Linux Version: 3.0.61
Overview:
I originally made this exclusively for the Nibbles ROM just to see if I could do it. I've had countless messages asking to release this as a separately supported Kernel for the SR. So, here it is. This is the version currently included in the Nibbles ROM and I intend to keep them in sync. To those of you that bugged the crap out of me about this new thread ... here you go ... enjoy.
Compatibility:
AOSP / CM10 ROMs / JellyBean / Non-Touchwiz ROMs
Samsung Skyrocket, Hercules and T-989 (you will need rotation fix for 989 - don't ask me for it)
Features:
CPU Speeds up to 1.782GHz
Under/Over Voltage Support
GPU Over Clocked (based on which you choose to download)
ARM big.LITTLE Topology
1.5GHz Fast Boot
USB Fast Charge
Added Governors
Added I/O Schedulers
MSM mpdecision
Lots of other changes and tweaks.
CPU Governors:
intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand (tweaked slightly), performance
I/O Schedulers:
noop, deadline, cfq, sio, vr, bfq, zen
Init.d Scripts:
smart zipalign at boot
governor (ondemand tweaks) - edit as necessary
systweaks
vacuum sqlite db optimization
Notes:
First boot may be slow as zipalign and sqlite tweaks run for the first time.
Installation will wipe cache and dalvik.
***DOWNLOAD Nibbles Kernel v1.4 HERE!***
Download:
http://tinyw.in/wURw
MD5:
9ed630cbf86cb51cfe0cea86bacade0e
Click to expand...
Click to collapse
***DOWNLOAD Nibbles Kernel v0.1.3 HERE!***
The difference between the downloads is only the GPU speed. You can download and flash either of these at any time without wiping your system. Note that the installation will wipe your cache and dalvik, so after you reboot, let the apps setup and settle for a few minutes.
Stock GPU Speeds: http://tinyw.in/JOmM
MD5: 4dbdfc9322a7f27db97b32a8bb1cc0c4
GPU Clock Moderate (3D @ 300MHz / 2D @ 228MHz): http://tinyw.in/Answ
MD5: 7a4e8793e9ce1838185d3dd4c07c8af6
GPU Clock Nibbles ROM Default (3D @ 320MHz / 2D @ 228MHz): http://tinyw.in/ULPG
MD5: 25e2e0a436e402ee305e18e051c21245
GPU Clock Insanity (3D @ 320 / 2D @ 266MHz): http://tinyw.in/u0Rx
MD5: 5e1534efc1b410411123a363ade0507c
* This isn't stable, I only published this because I got bored. Your phone will likely piss fire and crash after you flash this. But, it's fun.
Click to expand...
Click to collapse
A brief guide on how to include this in your own CM10 ROM.
Add the following to your local_manifest.xml:
<project name="carvsdriver/msm8660-common_nibbles" path="kernel/samsung/msm8660-common" remote="github" revision="jb-nibbles" />
<project name="carvsdriver/vendor_nibbles-kernel" path="vendor/nibbles-kernel" remote="github" revision="master" />
Next, you'll need to update your cm.mk file with this:
$(call inherit-product, vendor/nibbles-kernel/nibbles-kernel.mk)
Github: https://github.com/carvsdriver
Click to expand...
Click to collapse
Special Thanks:
thomas.raines & Team Fah-Q for the original LZ kernel, answering tons of my questions and for being a good guy in general.
Team ROOK for being awesome
Team Cyanogenmod for CM10
m4570d0n
Stuff in the works:
Revamped GPU clocks... I found that 3D @ 320 / 2D @ 228 seems to work pretty well and has a relatively good balance. The 2D GPU doesn't like being clocked beyond 228 at all.
Some governor work - likely will remove ondemand and conservative since they're effectively pointless with the other governors present.
And anything else I feel like screwing with ...
First!!!!!! Oh yes I'm cool. Pffft bwahahahaha looks good enough to flash. Will report later
Just flashed the moderate gpu oc version on Slim Bean. Very fast and smooth with smartassv2/sio and 1.62ghz oc. Thanks for all you do, sir.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
best kernel so far . the only reason i didn't switch to tw ROM. interactiveX and smart V2 are the best two
Been on this kernel for a while, just finally made the decision to uv - 50mv on every clock speed, no stability problems so far, gotta say I'm really liking how my phone feels running this kernel though
Sent from my Nexus 7 using XDA Premium HD app
bearclaw7380 said:
First!!!!!! Oh yes I'm cool. Pffft bwahahahaha looks good enough to flash. Will report later
Click to expand...
Click to collapse
I use this kernel on blinky, it's a good kernel!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
car vs driver said:
First boot may be slow as zipalign and sqlite tweaks run for the first time.
Installation will wipe cache and dalvik.
Special Thanks:
thomas.raines for the original LZ kernel, answering tons of my questions and for being a good guy in general.
Team ROOK
Click to expand...
Click to collapse
Nice work. The wipes in the updater script is a great.
Since this is based off of LZ did you keep the voltages that Thomas was using(-50) or did you return them to stock? Just wanna know what I'm really UVing by.
hechoen said:
Nice work. The wipes in the updater script is a great.
Since this is based off of LZ did you keep the voltages that Thomas was using(-50) or did you return them to stock? Just wanna know what I'm really UVing by.
Click to expand...
Click to collapse
They were stock when I started uving it.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
They were stock when I started uving it.
Click to expand...
Click to collapse
That's the thing. I can't find a stock voltage table. I looked in Faux old kernel thread and he has a voltage table but I don't know whether it's for the base of his kernel or stock values. Of course system tuner won't let you check until you have a kernel flashed that allows user defined voltage. So if the DEV already dropped the stock values that's what you'll see. Anyone know the stock voltages? Or an app that let's you check stock voltage?
hechoen said:
That's the thing. I can't find a stock voltage table. I looked in Faux old kernel thread and he has a voltage table but I don't know whether it's for the base of his kernel or stock values. Of course system tuner won't let you check until you have a kernel flashed that allows user defined voltage. So if the DEV already dropped the stock values that's what you'll see. Anyone know the stock voltages? Or an app that let's you check stock voltage?
Click to expand...
Click to collapse
I remember the first few off the top of my head so I know it was stock.
You can use a terminal emulator to check them.
Faux used stock values
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
I use this kernel on blinky, it's a good kernel!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
+1
Using this kernel on my CM10 and it is very good.
Thanks CvD!
Sent from my SAMSUNG-SGH-I727 using xda premium
Great work! Smooth and quick! I am beginning to think that the problem I have with incorporating this kernel into my PACman ROM has to do with this building smoothly with CM ROMs. I realize that PAC has CM in it, but for some reason, the build does not compile Nibbles or LZ in the process, no matter what I do. Somewhere in the process, it reverts back to CM stock. I've altered dependancies and everything else, and always the same result. But, I digress. You are putting out top-notch work and everyone appreciates it! Be cool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wish we could use a custom kernel on the un-official Miui Android rom port for the Skyrocket.
having amazing results with my -50 uv everywhere so far, completely stable, ondemand/sio/1.51or1.72Ghz everything is smooth as can be thanks, gonna start experimenting with a bit more uv and other governors and comparing performance/battery life
JimmyD_92 said:
Just flashed the moderate gpu oc version on Slim Bean. Very fast and smooth with smartassv2/sio and 1.62ghz oc. Thanks for all you do, sir.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
So this will work on jb roms?
Edit: I meant touchwiz but read op and figured it out. Sorry for wasting space.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
smoeki said:
So this will work on jb roms?
Edit: I meant touchwiz but read op and figured it out. Sorry for wasting space.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Not for tw.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
This kernel is amazing. Performance is great with moderate gpu oc, 1.62 oc interactive/noop, and -25mV. Battery life is as good or better than the stock Slim kernel. Thanks again CvD!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Added a new version, the Nibbles v1.6 default GPU 320/228. Enjoy!
car vs driver said:
Added a new version, the Nibbles v1.6 default GPU 320/228. Enjoy!
Click to expand...
Click to collapse
using the stock gpu clock version, besides frequency changes any new code commits or governor/scheduler changes ?
Related
Update 2012\05\16
Removed blank bootmenu folder
Cleaned up init script, removed unsupported lines, added supported lines
Included SD Card Cache Tweak with 2048 value, to match io tweaks
**The lines weren't supported on Bravo Froyo Kernel, added new lines from /sys/block/mmcblk0/queue/iosched**
**If the removed lines are supported on GB Kernel, let me know and I'll make a zip for each kernel.**
**Just remove the last 2 lines of the init script if you don't want\need the SD Cache Tweak**
Update 2012\05\15
Removed Undervolt settings -- makes zip universal for Defy, Defy+, Bravo, and Milestone
SIO IO Scheduler now properly loads -- no market app needed now.
Original Post
I made this for the Motorola Bravo, but it should work just fine on the Defy.
This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to [email protected], [email protected], and [email protected] Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.
To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.
To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.
To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.
I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.
I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.
Testing...
Edit:I don't know what these two governors do... but I see them in the app...
bootmenu script entries are missing I'll try to edit...
here is a zip for defy plus phones with 4 clocks...
http://d-h.st/b0R
Sent from my MB526 using xda premium
nogoodusername said:
Testing...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
They flashed fine?? as in the OP is says that it was tested on a bravo...
Hairo The Blue Mage said:
They flashed fine?? as in the OP is says that it was tested on a bravo...
Click to expand...
Click to collapse
I'm curious as well. I've tested the zip on Quarx2k's CM9 2012\05\12, and adb push tested on CM9 05\06, 05\09, and CM7 05\06 with no problems; but they were all done on a Bravo.
I also had damn good battery results with the BOOSTEDassV2 governor overclocked to [email protected], [email protected], [email protected] on CM9....they were better results than the stock settings undervolted with Conservative governor. I suppose it was due to CLK2 being used efficiently in my real world tests; I usually get around 60% usage in CLK1, 25%in CLK2, and15% in CLK3 --- not counting Deep Sleep Mode.
@nogoodusername
bootmenu script entries are missing I'll try to edit...
I'm not sure how to edit the bootmenu entries, or I would.
I also have the InteractiveX Governor, but its for the GB kernel only according to what little information I can find. Could never get it to load on the Bravo.....but the Bravo is a Froyo Kernel only device. I've attached it to this post, just remove the .txt extension....
It flashed fine, screene:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no problems until now, testing BOOSTEDassV2 at [email protected], [email protected], [email protected] on CM7 Whiterabbit edition...
can't tell if it's the placebo effect or everything is faster now...
Hairo The Blue Mage said:
It flashed fine, screene:
no problems until now, testing BOOSTEDassV2 at [email protected], [email protected], [email protected] on CM7 Whiterabbit edition...
can't tell if it's the placebo effect or everything is faster now...
Click to expand...
Click to collapse
Probably a little of both
BOOSTEDassV2 Works awesome!
I've include that in my roms..
skeevy420 said:
Probably a little of both
Click to expand...
Click to collapse
haven't tested the SIO Kernel Scheduler, cause i'm using setcpu (no Scheduler support, but freqs profiles support )
any app that has both of them??
Hairo The Blue Mage said:
haven't tested the SIO Kernel Scheduler, cause i'm using setcpu (no Scheduler support, but freqs profiles support )
any app that has both of them??
Click to expand...
Click to collapse
Not that I'm aware of. I do know that the KickAssKernelizer can change the IO Scheduler....as well as other tweaks, but I've had good results with it on CM7 and 9. I use No Frills Cpu Control for the IO Changer and the Apply on Boot for IO and Governor. Also, MIUI doesn't have a "Performance Menu" which is why I found No Frills in the first place. I had bad results with V6Supercharger on CM9, but excellent results on CM7 (and yes I did the online CM9 patch for the Supercharger).
In the zip is an init script that's supposed to set the IO to sio, but it doesn't work. I'm gonna look into it tomorrow when I get off. I also use the same script to load the governors as well, so don't remove it. I first used /bootmenu/script/overclock.sh to load the governors, but smartassv2 wouldn't load up.
I also noticed a bug a few months back with CM7 where the bootmenu governor wouldn't behave correctly, which is why I use the CM Menu or No Frills apply on boot setting. The apply on boot causes the governor to be loaded and work right. Just don't pick the same governor in the bootmenu and Performance menu since it'll bug up as well. All this was true on CM7 in March and Early April. Haven't done much CM9 testing with the governor bug, but I get good results with the apply on boot method I use.
skeevy420 said:
Not that I'm aware of. I do know that the KickAssKernelizer can change the IO Scheduler....as well as other tweaks, but I've had good results with it on CM7 and 9. I use No Frills Cpu Control for the IO Changer and the Apply on Boot for IO and Governor. Also, MIUI doesn't have a "Performance Menu" which is why I found No Frills in the first place. I had bad results with V6Supercharger on CM9, but excellent results on CM7 (and yes I did the online CM9 patch for the Supercharger).
In the zip is an init script that's supposed to set the IO to sio, but it doesn't work. I'm gonna look into it tomorrow when I get off. I also use the same script to load the governors as well, so don't remove it. I first used /bootmenu/script/overclock.sh to load the governors, but smartassv2 wouldn't load up.
I also noticed a bug a few months back with CM7 where the bootmenu governor wouldn't behave correctly, which is why I use the CM Menu or No Frills apply on boot setting. The apply on boot causes the governor to be loaded and work right. Just don't pick the same governor in the bootmenu and Performance menu since it'll bug up as well. All this was true on CM7 in March and Early April. Haven't done much CM9 testing with the governor bug, but I get good results with the apply on boot method I use.
Click to expand...
Click to collapse
Ok, ill wait for the script fix
Keep it up!!
PD: no placebo, dead space worked better on BOOSTEDassV2, even with v6supercharger on balanced mode...
Hairo The Blue Mage said:
any app that has both of them??
Click to expand...
Click to collapse
SimpleOverclock
Has Profile support, apply on boot support, changes io scheduler, changes governors. I hope this is what you're looking for. I think I may have a new OC app now.
No frills refuses to recognise my current clock speeds..
Swyped with my Defy using XDA app.
Hit the "Thumbs Up" if I've been able to help..
skeevy420 said:
SimpleOverclock
Has Profile support, apply on boot support, changes io scheduler, changes governors. I hope this is what you're looking for. I think I may have a new OC app now.
Click to expand...
Click to collapse
Even this refuses to recognise my clock speeds.. Showing 800 as max when I'm running @1000 right now.. :-/
Swyped with my Defy using XDA app.
Hit the "Thumbs Up" if I've been able to help..
I can confirm to all miui users on wajk 2.4.20 this is working perfectly so far no problems with booting I have boostedassv2 as governor
Sent from my MB525 using xda premium
What's the defference between this and the clocksettings inside bootmenu?
it works also on cm white rabbit 1.5.2!
i can't really get the differences between smartass2 and bootass2.. could someone tell me the differences??
i did a search on the forum but i can find only smartass informations.. nothing on bootass!
and do you think it would be better with 3 or 4 clocks??
thanks guys!!
memz180 said:
I can confirm to all miui users on wajk 2.4.20 this is working perfectly so far no problems with booting I have boostedassv2 as governor
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Are your current clock speeds showing properly? Not talking about the governors..
Swyped with my Defy using XDA app.
Hit the "Thumbs Up" if I've been able to help..
m11kkaa said:
What's the defference between this and the clocksettings inside bootmenu?
Click to expand...
Click to collapse
The clock settings in the bootmenu does not use the governors such as smartass etc from what i saw on my phone anyway
after i flashed the above zip file, Setcpu had all the governors in the program such as smartass boostedassv2 etc then you can apply on boot
work on MB525 ???
Kenjo36 said:
work on MB525 ???
Click to expand...
Click to collapse
yeah...
Sent from my MB526 using xda premium
[Kernel][9/5] - CleanKERNEL 1.2 -★| CPU OC 1.99 | GPU OC 300/500 | UV | VRALG1 |★-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!
Features
CPU Overclockable to 1.99 GHZ (vs 1.5GHZ stock).
CPU Underclockable to 192MHZ (vs 384MHZ stock).
The CPU comes clocked at normal Samsung specs of 384MHZ low and 1.5GHZ high. You will need an application like System Tuner or Set CPU to overlcock it. This can also be modified by advanced users in the init.rc but is not recommended or supported. See first two blocks of init.rc for details.
GPU Overclocked at 300/500 MHZ
Under-volted just a few milli-volts to help save battery.
There are no fancy governors or other such things. Its a modified stock kernel, plain and simple.
This kernel should be compatible with any VRAGL1 based ROM such as (of course) CleanROM and Nosympathy's stock rooted base. Good chance it will work well with Team Synergy's ROM too but I have not tested that ROM but its a VRALG1 Based ROM.
If your ROM has non Samsung Boot Animation you will more than likely loose it!
Its been said that flashing a kernel can cause IMIE loss. I have not seen it myself but I guess its possible.
This kernel will NOT work with any AOSP, AOKP, CM9, CM10, etc based ROMS! If the ROM is not a based on official Verizon VRAGL1 ROM then dont flash this kernel!
Instructions
Must have an UNLOCKED BOOTLOADER! No exceptions!
Should make a complete Nandroid back up before flashing!
Copy ROM to storage and flash
Use your favorite CPU controller app to set the speeds.
WARNING!
Overclocking can permanently ruin your device. I mean totally kill it! You accept this fact upon downloading the kernel and or source!
I cannot and will not take any responsibility for what this kernel does to your device!
Not all devices can maintain the same level of overclocking!
Just because the kernel can clock to 1.89 does not mean YOUR device can!
Be smart and start off low and bring upt the speed gradually just like O/C'ing a desktop CPU!
To return to what you had before this... Restore your Nandroid back up! You did make that back up, right?
Changes in this version
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed: gsiff_daemon fix?
Added: Optimaztions to file system
THANKS!
Thanks to dsb9938 for helping me get my box set up and to sbryan12144 for schooling me on the edits to make. Without their help I would still be looking at an empty Ubuntu desktop wondering where to go!
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!
Downloads
Kernel HERE
MD5: F69F8AA037DCA3C03D5E6B22656FE684
Source HERE
MD5: 20907545F7CD5DF5717EA0101FFF054F
Donations accepted but not expected :angel:
Please hit Thanks and Rate the thread 5 Stars
Click to expand...
Click to collapse
Benchmarks dont matter! But your going to ask anyways so I already ran the three most popular benchmarks and the results are below. Your device and ROM set up may NOT acheive these benchmarks.
All testing was done on a fresh install of CleanROM 2.0 SP1 with no background sync 1.89GHZ and Ondemand governor.
These benchmarks are the best of 3 or 4 runs each. They didint vary too much from this except Linpack. That thing is all over the place.
Do not expect to get these scores!
Next your going to ask me how the battery life is. Being a new kernel it doesnt have as much metering under its belt so you I will need your input on what you see. Obvisouly if you clock it up high you will see a decrease in battery life. Let me know what you are seeing.
Change Log
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed:gsiff_daemon fix?
Added: Optimaztions to file system
8/24/2012 - Version 1.0
Initial Release
looks awesome
Excellent work!
Sent from my SCH-I535 using xda premium
WizeGuyDezignz said:
Excellent work!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thank you man!
on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post
Karl said:
on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post
Click to expand...
Click to collapse
MD5's posted....
As stated in OP...
This kernel is based of the Samsung stock kernel for the Verizon based SGS3. The kernel does not deviate from the stock kernel except as noted below...
Click to expand...
Click to collapse
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?
scrosler said:
MD5's posted....
As stated in OP...
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?
Click to expand...
Click to collapse
my bad just glanced at the op :silly:
Karl said:
my bad just glanced at the op :silly:
Click to expand...
Click to collapse
Its all good. I will post modified RAM disk that supports non Samsung boot animations later on... I just want to get a feel right now for the kernel and how it works out for people.
EDIT: But you do bring up a good point... I will post in the OP that you will loose custom boot ani's.
Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:
joaquinla1 said:
Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:
Click to expand...
Click to collapse
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.
scrosler said:
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.
Click to expand...
Click to collapse
I'm using CPU master and after clicking apply like 10 times it stuck at 192.
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Good job man
joaquinla1 said:
I'm using CPU master and after clicking apply like 10 times it stuck at 192.
Click to expand...
Click to collapse
Nah, its sticking when you apply, but the thermald config may need some tweaking because it pushes it back up. So it doesnt seem like its sticking but its but then it gets overwritten.
Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
Wow, Thats crazy!
How does that happen?
sbryan12144 said:
Good job man
Click to expand...
Click to collapse
I learned from the best!
Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
please provide reference
Karl said:
please provide reference
Click to expand...
Click to collapse
Dont stress it... He said what he had to say. Maybe he is right. I put in the OP so...
Lets get to some feedback on the kernel itself...
This thing is lightning fast and has same battery life as stock. Been hammering on it all night
Sent from my Nexus 7 using Tapatalk 2
This thread is being consolidated! Please click on this link to go to the unified DevDB thread.
Previous information is retained below for reference only.
Ktoonsez presents:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KT747 Jellybean kernel features
•Unlocked bootloader
•Must have a Verizon AOSP ROM
•Must have CWM or other custom recovery installed
•Linux kernel 3.0.69 + 3.4.95
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•Updated wifi driver
•custom bootanimation
•unsecure root adb
•init.d support
•Governors (MSM-DCVS, ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY, SMARTASSV2, WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, LULZACTIVE, KTOONSERVATIVE, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE)
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2106mhz)
•Fastcharging for USB/Car Charger (you must be unplugged before turn fast charge on or off, also Fast Charge DISABLES USB connection to your PC)
•KTweaker app for kernel control
•KTweaker Widget
Click to expand...
Click to collapse
AOSP KITKAT 4.4 VERSIONS:
http://goo.gl/e49Nux
Click to expand...
Click to collapse
******* END OF LIFE *******
Touchwiz JELLYBEAN 4.1.2 VERSIONS:
http://goo.gl/qCpk94
Click to expand...
Click to collapse
Touchwiz JELLYBEAN 4.3 VERSIONS:
http://goo.gl/BwUTCY
Click to expand...
Click to collapse
AOSP JELLYBEAN 4.2 Linux 3.4 VERSIONS:
http://goo.gl/LtSV9
Click to expand...
Click to collapse
AOSP JELLYBEAN 4.3 Linux 3.4 VERSIONS:
http://goo.gl/sppGEb
Click to expand...
Click to collapse
***** IMPORTANT *****
If you are using my ktoonservative governor with the Touchwiz JELLYBEAN version, you should rename /system/bin/qosmgr to /system/bin/qosmgr.bak to prevent battery drain
FYI: CM10 sometimes does not want to cooperate with the max Mhz settings from my scripts, since it is a beta ROM, so you will have to set it manually with "Voltage Control" or run the script I put in "/system/etc/init.d/00post-init"
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions
Post #2 will be reserved for change logs
Post #3 will be reserved for Extras and FAQ's
Link to a list of previous builds
http://forum.xda-developers.com/showthread.php?p=41733434
OLD DOWNLOADS
4.1 JELLYBEAN VERSIONS:
AOSP JELLYBEAN: Download CWM flashable zip kernel
http://www.mediafire.com/download.php?yh5obe66iyp1aop
Touchwiz JELLYBEAN: Download CWM flashable zip kernel
http://www.mediafire.com/?zh935591av6a6y8
Click to expand...
Click to collapse
AOSP JELLYBEAN 4.2 Linux 3.0 VERSIONS:
http://www.mediafire.com/download.php?0azdvx9t7x70wla
Click to expand...
Click to collapse
Sources can be found here:
https://github.com/ktoonsez/KT747-JB
Visit my original kernel thread here:
http://forum.xda-developers.com/showthread.php?t=1756776
Go to my original thread to view Change logs:
http://forum.xda-developers.com/showpost.php?p=28399835&postcount=2
Governors and schedulers explained:
http://forum.xda-developers.com/showthread.php?t=1687578
http://forum.xda-developers.com/showthread.php?t=1369817
http://tinzdroid.blogspot.com/2012/07/android-kernel-governors-modules-io.html
http://forum.xda-developers.com/showpost.php?p=21638852&postcount=56
Here is a link for people having issues with 64GB sd card. Follow the link below:
http://forum.xda-developers.com/showthread.php?t=1755448
Undervolting
Stock___________________Undervolt startoff point
Mhz - mV___________________Mhz - mV
1890 - 1300___________________1890 - 1300
1809 - 1275___________________1809 - 1250
1728 - 1250___________________1728 - 1200
1674 - 1200___________________1674 - 1175
1512 - 1200___________________1512 - 1200
1458 - 1187___________________1458 - 1187
1404 - 1187___________________1404 - 1187
1350 - 1175___________________1350 - 1175
1296 - 1175___________________1296 - 1175
1242 - 1150___________________1242 - 1150
1188 - 1150___________________1188 - 1150
1134 - 1125___________________1134 - 1125
1080 - 1125___________________1080 - 1125
1026 - 1075___________________1026 - 1075
972 - 1075____________________972 - 1075
918 - 1050____________________918 - 1050
864 - 1050____________________864 - 1050
810 - 1025____________________810 - 1025
756 - 1025____________________756 - 1025
702 - 975_____________________702 - 925
648 - 975_____________________648 - 925
594 - 950_____________________594 - 850
540 - 950_____________________540 - 850
486 - 925_____________________486 - 850
384 - 925_____________________384 - 825
192 - 900_____________________192 - 825
A bunch of you guys requested it, so here it is.
ENJOY guys
Thanks to jgrimberg1979 for testing the kernel for me. Everything seems to checkout perfectly :good:
Wow...been watching this kernel for a long time...sadly still on ICS on synergy :-/
Sent from my SCH-I535 using xda app-developers app
ktoonsez said:
A bunch of you guys requested it, so here it is.
ENJOY guys
Thanks to jgrimberg1979 for testing the kernel for me. Everything seems to checkout perfectly :good:
Click to expand...
Click to collapse
Thanks so much flashed and rotation is working perfectly. Loving this kernel
Sent from my SCH-I535 using xda app-developers app
wait... sprint aosp rom??? so we need a sprint rom for this to work? because last time i checked flashing sprint roms on verizon bricks our verizon phones. unless i am misunderstanding somethin here. so verizon owners cant use???
Stryker1297 said:
wait... sprint aosp rom??? so we need a sprint rom for this to work? because last time i checked flashing sprint roms on verizon bricks our verizon phones. unless i am misunderstanding somethin here. so verizon owners cant use???
Click to expand...
Click to collapse
Sorry about that guys, typo, and it is fixed, it should have said Verizon. Thanks for catching that
ktoonsez said:
Sorry about that guys, typo, and it is fixed, it should have said Verizon. Thanks for catching that
Click to expand...
Click to collapse
ah no probs. great work mate
You rock ktoonsez!
Sent from my SCH-I535 using Tapatalk 2
Installing now thanks.
Sent from my Nexus 7 using Xparent Blue Tapatalk 2
There a some major change beetwen thisone and the ATT one, im asking u because im have been runnin that one
Sent from my SCH-I535 using xda app-developers app
juancaperez2000 said:
There a some major change beetwen thisone and the ATT one, im asking u because im have been runnin that one
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes, quite a few, this is compiled with the proper flags and inits for your phone, but if it is working great dont worry about it
ktoonsez said:
Yes, quite a few, this is compiled with the proper flags and inits for your phone, but if it is working great dont worry about it
Click to expand...
Click to collapse
Cool, I was wondering the same. Running well... but I am a crack flasher, probably gonna go ahead.
Awesome work!
ktoonsez said:
Yes, quite a few, this is compiled with the proper flags and inits for your phone, but if it is working great dont worry about it
Click to expand...
Click to collapse
Wow man you are a beast. Glad to see you giving use vzw folks some love. Can you post an md5 sum just to make sure we don't have any bad downloads. Thank you.
Sent from my SCH-I535 using Tapatalk 2
This kernel is running great for me on AOKP.
Thank you!
Sent from my SCH-I535 using Tapatalk 2
Delete
I'd hate to ask...but is there any chance of you working on porting over your ICS one as well for us on synergy/beans/cleanrom . This kernel is awesome, really wish I could use it!
Sent from my SCH-I535 using xda app-developers app
duarian said:
I'd hate to ask...but is there any chance of you working on porting over your ICS one as well for us on synergy/beans/cleanrom . This kernel is awesome, really wish I could use it!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
If I have some time today I will brew one up and post it to see if it will work. :good:
[KERNEL] [ANDROID 4.3-5.1] LeanKernel: Minimalistic Kernel [V5.3, (4/17/15)]
ALL CREDITS GO TO IMOSEYON FOR HIS AWESOME KERNEL FOR THE NEXUS 7 THIS IS POSTED STRAIGHT FROM THIS THREAD AT ROOTZWIKI LINK: http://rootzwiki.com/topic/35483-kerneljbbeta-leankernel-minimalistic-kernel-v02beta-102012/
===================================================
Sources: https://github.com/imoseyon/leanKernel-grouper
Notice: Versions 0.6+ are only for android 4.2 based roms
Notice 2: Version 2.0+ are only for android 4.3 based roms
Notice 3: Version 3.0+ are only for android 4.4 based roms
Notice 4: Version 5.0+ are only for android 5.0 based roms
LATEST VERSION: 5.3 will work on 5.1 ROMs
FEATURES:
Unnecessary kernel components removed to make kernel lean and fast!
OC'ed to 1.5Ghz. At boot cpu slots are limited between 204mhz and 1.3Ghz for stability. Use your favorite app to OC or UC.
Ramdisk tweaks (sysctl, vm, etc.)
init.d support
Tons of patches backported from Linux 3.2.
SWAP and ZRAM supported. Use built-in script: "zram enable" or "zram disable"
ROW and tuned Deadline i/o schedulers
Compiled using latest linaro toolchain and optimizations.
USB Audio support
USB charging high current mode enabled at all times
"lkflash" script to flash latest leanKernel releases. (Open Terminal, su, and then type lkflash).
DOWNLOADS:
ALL VERSIONS
CHANGELOG:
Up to date changelog(s) new: https://github.com/imoseyon/leanKernel-grouper/wiki/Lollipop-ChangeLog
i really like the fact you asked for permission to post this here on xda..many times people dismiss that some dev disagree with the fact of distribute a kernel in all the place (for example like did ezeekeel on gnex etc..).now to the kernel,used it the day it came out and all i can say is that it's smooth and gave me very long battery time...reccomended to everyone also if it's in initial stage|!:good:
Will this support CM10?
Sent from my Nexus 7 using xda app-developers app
can i uv on this?
Syphen5 said:
Will this support CM10?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It should...
bervin said:
can i uv on this?
Click to expand...
Click to collapse
Not yet. Do you think UV really helps on nexus 7?
Imoseyon said:
It should...
Not yet. Do you think UV really helps on nexus 7?
Click to expand...
Click to collapse
I UV by -100mv on my nexus 7 on Franco kernel and I do see a little extension of my battery. In your opinion it doesn't help?
Nice kernel, needs a little work as far as flash goes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good! i also try this kernel, so far so good!
azoller1 said:
ALL CREDITS GO TO IMOSEYON FOR HIS AWESOME KERNEL FOR THE NEXUS 7 THIS IS POSTED STRAIGHT FROM THIS THREAD AT ROOTZWIKI LINK: http://rootzwiki.com/topic/35483-kerneljbbeta-leankernel-minimalistic-kernel-v02beta-102012/
===================================================
Sources: https://github.com/imoseyon/leanKernel-grouper
FEATURES
Unnecessary kernel components removed to make kernel lean and fast!
OC'ed to 1.5Ghz. At boot cpu slots are limited between 204mhz and 1.3Ghz for stability. Use your favorite app to OC or UC.
Ramdisk tweaks (sysctl, vm, etc.)
init.d support
Tons of patches backported from Linux 3.2.
SWAP and ZRAM supported. Use built-in script: "zram enable" or "zram disable"
SIO i/o scheduler
Compiled using latest linaro toolchain and optimizations.
USB Audio support
That's it for now (but more to come), leanKernel is not right for you if you want lots of fancy features.
FAQ
DOWNLOADS
V0.2Beta- http://encounterandroid.com/imoseyon/grouper/beta/lk_nexus7_jb-v0.2beta.zip
CHANGELOG
v0.2 10/20/12 (1a868bbff4b537f9407bb17b754786c8) - initial beta release
Click to expand...
Click to collapse
I am going to post this in my kernel thread if you don't mind
Sent from my Nexus 7 using Tapatalk 2
ncvikingx97 said:
I am going to post this in my kernel thread if you don't mind
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
This isn't my kernel you might wanna ask the dev. From the rootzwiki website at top of op but I'm sure your fine
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Is anyone having problems with the kernel?
Sent from my stock LG Spectrum Using LTE 4G on Verizon
azoller1 said:
Is anyone having problems with the kernel?
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Click to expand...
Click to collapse
nope. it runs smooth here.
Holy s#$t!! We have a Lean Kernel for the Nexus 7! Is there going to be a Leantweaks script to go along with this? I have been using Lean on my Sprint and unlocked GSM Galaxy Nexus running 920 max and I can't even tell its underclocked. I am also able to run 230 or even 180 minimum so I can't wait to see where this goes! Many thanks Imoseyon
Sent from my Nexus 7 using Xparent SkyBlue Tapatalk 2
just flashed this kernel and will give it a try..
one thing i noticed though..
while in first boot after flashing, "No-frills CPU Control" reported a max 1.5 GHz and min 204 MHz (which should be max 1.3 GHz as i read from the thread by the kernel developer)..
and after some time (without reboot), it reported max 700 MHz and min 204 MHz..
is this a kernel problem and "No-frills CPU Control" problem?
iamelton said:
just flashed this kernel and will give it a try..
one thing i noticed though..
while in first boot after flashing, "No-frills CPU Control" reported a max 1.5 GHz and min 204 MHz (which should be max 1.3 GHz as i read from the thread by the kernel developer)..
and after some time (without reboot), it reported max 700 MHz and min 204 MHz..
is this a kernel problem and "No-frills CPU Control" problem?
Click to expand...
Click to collapse
Yeah I have also been having problems with no frills CPU control it doesnt always say the correct CPU speeds I'll check to see if it's a kernel problem
Sent from my stock LG Spectrum Using LTE 4G on Verizon
System tuner is recommended for CPU control
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Updated:
v0.3 10/28/12
-Added High Current Mode for USB Charging
-Work queue code backported from mainline linux
-Even Leaner
Wanted to check and see if this kernel worked on aokp as well as cm?
Sent from my aokp'd n7
It should work on both as I have tried it on both with no problems
Sent from my Nexus 7 using Tapatalk 2
is on 0.3 and so far so good..
runs smoothly and battery consumption is quite impressive..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS:
ASDK 1.0
(All-Star Devs Kernel)
Features for 4.1.2 Version
Linux kernel 3.0.49
GPU clock to 320MHz
Governors (ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY,WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Max OC 1.9ghz (PLEASE DON'T OC TO 1.9 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Fast Charge
Only for AOSP Roms running 4.1.2
My ASDK Controller app is included
Features for 4.2.1 Beta Version
Linux kernel 3.0.62
Overclocking
Max OC 1.9ghz (PLEASE DON'T OC TO 1.9 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Only for AOSP Roms running 4.2.1 (SO FAR FOR AOKP 4.2.1 & CM10.1)
My ASDK Controller app is included
Click to expand...
Click to collapse
Download
Size: 7.69 MB
MD5: 11eeb5680426c97d69e6c5fb5d7b0a77
Download: http://tinyw.in/VDhM[/SIZE]
CHANGES DETAILED HERE: http://forum.xda-developers.com/showpost.php?p=37052058&postcount=32
4.2 Beta
Size: 9.38 MB
MD5: 09d11c4490170552ab940f57f82ab480
Download: http://tinyw.in/RBCA
Click to expand...
Click to collapse
Credit/Thanks
Click to expand...
Click to collapse
BIGGEST THANKS TO DAGR8 FOR HIS KKO KERNEL AS IT WAS THE BASE FOR ASDK KERNEL FOR SGS2
Ktoonsez
Imoseyon
Thomas.raines
Krazeecracker
Android88
Ptmr3
Click to expand...
Click to collapse
Feedback format if you are having problems
Governor:
Rom:
Overclock settings:
Undervolt settings:
Click to expand...
Click to collapse
GITHUB: https://github.com/Ayysir/ASDK-sgs2/commits/asdk-4.1
Thanks so much
It's amazing how fast this community got reactivated. Lol
Thank u developers
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
About to flash will report back
originally built this for hercules, but wanted to share it with you guys
camera is a bit laggy btw, trying to find out what is causing it
Rotation is borked :\
likely you will have to flash rotation fix, Do SR have one ?
http://forum.xda-developers.com/showthread.php?t=2100105
try this
flashed your kernel on cm 10.1 preview 2 and phone is not doing anything after samsung boot logo. dark screen :crying:
ayysir said:
likely you will have to flash rotation fix, Do SR have one ?
http://forum.xda-developers.com/showthread.php?t=2100105
try this
Click to expand...
Click to collapse
for some reason the rotation fix doesn't work on 4.2
Will try to look into it. I'm a fish out of water when it comes to rotation bs
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
wali01x said:
flashed your kernel on cm 10.1 preview 2 and phone is not doing anything after samsung boot logo. dark screen :crying:
Click to expand...
Click to collapse
Which build did you flash?
Sent from my Nexus 4 using xda premium
stuck
Governor: ondemand
ROM: cm 10.1 preview 2
Overclocking: stuck at 1.9
Undervolt: don't mess with that
Everytime i try to underclock or go to 1.5 ghz it just shoots back up to max. Other than that great job
1.83ghz overclock stable voltage
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
There are 2 other 4.2.2 kernels. You decided to choose a 4.2.2 kernel that is in beta, and released 3 months ago. Mind trying Marla or Moretz?
mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
Moretz is pretty bad$$ my opinion
Sent from my I727 running something kewl.
immaeetuu said:
There are 2 other 4.2.2 kernels. You decided to choose a 4.2.2 kernel that is in beta, and released 3 months ago. Mind trying Marla or Moretz?
Click to expand...
Click to collapse
Maybe he just likes this kernel. . . .
Sent from my SGH-I727 using xda premium
mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
That is never going to be stable. Bump down
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
bzzybfrm313 said:
Governor: ondemand
ROM: cm 10.1 preview 2
Overclocking: stuck at 1.9
Undervolt: don't mess with that
Everytime i try to underclock or go to 1.5 ghz it just shoots back up to max. Other than that great job
Click to expand...
Click to collapse
I will have to test. Sorry just been busy building PA roms
Sent from my SGH-T999 using Tapatalk 2
mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
There are much newer builds of this kernel in the hercules forum. You could flash those, just you might have rotation issues if you don't keep the skyrocket rotation files (PM me for more info).
Sent from my Nexus 4 using Tapatalk 2
Ill try the hercules ones, mortez I don't think can go to 1.83ghz, that is really pushing it for the phone didn't expect it to be doable when it did work though I did see a performance gain from 1.78ghz and not a lot of heat being generated either, had it stable overvolted 1375mv for a little to then it died on me in a 3d game -_-