Database Info

[Kernel] Samsung Galaxy R (i9103) [OC][UV][ROOT] Kernel (Updated 2011-11-16 15GMT)

Well, so far, we don't have a separate forum for Galaxy R (i9103) so I need to put in here...
OK, the kernel is ready. I have tested it using Quadrant benchmark, CF-Bench and continuous playing of asphalt6 & dungeon hunter 2 for hours. Smooth and without causing much heat
Below are the details of the kernel:
Features
=======
- For Samsung Galaxy R (i9103) only
- Based on Samsung open source, kernel version 2.6.36.3
- Added new frequencies: 1200 & 1300Mhz
- Setting of max 1300Mhz through SetCPU
- All stock frequencies are untouched: 216-1000Mhz
- Expose the voltage settings to be set through SetCPU
- Limit the boot up frequencies to be 216-1000 to avoid unstable boot up
- Simple IO Scheduler
- 2.6.36.4 patches
- Speed up framebuffer copy
- memory copy macros and functions fine tune
- Misc. kernel fixes
- Rooted (embedded su & Superuser.apk)
Download link
==========
Updated: 2011-11-16 2:40GMT
Version: 1.2
File: ardatdat_i9103_kernel_1.3G_v02_SIO.tar
Link: http://www.mediafire.com/?9d2t25rcqby5v4l
Mirror: http://www.zshare.net/download/961997663b9269b8/
MD5: 6E32FBCF65DADDFF42374218D494401A
Q & A
=====
Q: How to flash the kernel
A: Just flash the .tar file using Odin3 PDA (the same as flashing most of Samsung's android phone). Easily search xda forum for Odin3 and how to use it (http://forum.xda-developers.com/showthread.php?t=1262272)
Q: Will it delete all my applications, settings or files?
A: No. (should be..) It is a kernel, not ROM, therefore, nothing would be deleted
Q: What version of ROM is supported?
A: Kernel version is 2.6.36.3, it is proved to work on 2.3.4/2.3.5/2.3.6 ROM
Q: I don't need overclock (OC), can you make a non-overclock kernel?
A: The kernel itself supports max. of 1300Mhz. It doesn't mean that you need to operate in such frequencies. You can freely set your frequencies using SetCPU (for example, you can set 216/216 when screen off, and 216/1000). In such case, no OC will occur
Q: Will I be rooted after flashing this kernel?
A: Yes. I have modified the kernel to make it embedded with su & Superuser.apk
Q: How stable is OC? Will the battery drain fast? Will the phone get hot?
A: For 1200Mhz, it is quite stable. For 1300Mhz, I have experienced 1 program FC. Apart from that, I am using 216-1300Mhz for daily use and it is quite stable. Tested with asphalt6 and dungeon hunter 2 for over an hour, no FC occurs. Also, the battery doesn't feel hot (it is the advantage of tegra2 CPU )
Q: How can I revert back to the stock kernel?
A: If you have flashed CWM, and you have backup before you flash this kernel, you can choose (advance restore) to restore only the boot.img. Alternative method is to download the rooted stock kernel here (flash through Odin3 PDA): http://www.mediafire.com/?guhb64qy3h6sang
*** I will keep updating this kernel to make it better and better ***
*** Finally, flash at your own risk ***
=====================================================================
From the Samsung Open Source web site, I have downloaded the kernel source for i9103 and made modifications to it. It is good that this phone is equipped with Tegra2 CPU such that overclocking will not cause much heat problem and I can successfully overclocked to 1.3GHz
Below are some screen shots and I will release the kernel later today as I am still testing the new kernel.
For the first version, I will add in rooting (su+superuser.apk), SIO Scheduler, 2.6.36.4 patches and some minor kernel fixes. Stay tuned
(Quadrant score is: 4275)
Odin3 (Flash thru PDA):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Machine setting
Score in Antutu benchmark:
Faster than Galaxy S2
Quadrant score:
Recommended SetCPU settings:

reserved .......

Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?

Good news!!! I'm very happy with the normal CPU speed but it's good to see any developers for this device!!

Google86 said:
Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?
Click to expand...
Click to collapse
Well, for ICS, I have downloaded the source code (haven't compiled yet...). I think porting to ICS ROM will not be too easy ... as I lack all those hardware libraries and experiences. Let's wait ICS for Galaxy S2 and see how far we can reach...
This kernel is proved to work in 2.3.4 and 2.3.5. Should also be ok for 2.3.6

thats perfect then! I'm in 2.3.4 stock with rooted kernel, I think if you provide us a rooted kernel with optional OC that would be awesome , thanks!

Great news, thanks!

So great!!! Congratulations for your work ardatdat, could you confirm the ROM version? 2.3.4/2.3.5...

Wow,thats amazing man *-*
We are waiting impatiently your kernel
Thank you!!!
P.D: A beer for you

greets, really nice! :3

Details & download link for the kernel is updated in post #1. Try it out

Dose this work on galaxy Z ?

sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App

zam117 said:
sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
Yes you can. And you wil get rooted after flashing this kernel.

Inkax2 said:
Dose this work on galaxy Z ?
Click to expand...
Click to collapse
Galaxy r=z
Please see more info on google: http://www.intomobile.com/2011/07/21/samsung-galaxy-r-galaxy-z-those-living-outside-sweden/

G R E A T !!!!!
Ps.: why on XDA do not exist a subforum dedicated to Galaxy R?

Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!

Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?

mrsaccess said:
Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!
Click to expand...
Click to collapse
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
---------- Post added at 02:09 PM ---------- Previous post was at 01:43 PM ----------
s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?
Click to expand...
Click to collapse
I gues since there is no any custom roms it only works with stock ones

s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
Click to expand...
Click to collapse
There is a CWM version 4.0.0.2 that works with the phone. I just found (and flashed) today myself.
I found it at a Chinese forum and at a Spanish forum. Downloaded from both and had the same flashable tar (checked with diff), though different apks (which I didn't install anyway).
Try it from here: http://www.megaupload.com/?d=Q33VEDF0
I am terribly sorry but I can't find from which forum I originally got this link. It isn't mine work of course.
After flashing with ODIN (the same way you flashed the rooted kernel), to enter into recovery turn on the phone and while it is on the Galaxy R boot screen, press voulme up and home together. Do not press them before powering on because your phone won't turn on, instead it may block and you will have to remove the battery for some seconds.
---------- Post added at 05:43 PM ---------- Previous post was at 05:38 PM ----------
nedooo said:
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
Click to expand...
Click to collapse
Will do!

[ROM][26 NOV] EeeBOMB v1.0.0 By CdTDroiD | 3.2.1 | 8.6.5.19 |Stock | Fast | Stable

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Stock 3.2.1 Base
Speed & RAM Scripts
Latest Superuser
Stock looking optimized for everyday use
Zipaligned on every boot for speed
Clean fast and stable ROM perfect for everyday use
Advanced power menu
Extended battery life
Adfree base
WiFi Driver improvements & greater range
Hardware Acceleration Enabled (GPU UI Enabled)
Rooted and Latest Superuser added
Tweaks for speed and memory improvements
Fully de-odexed
Fully Zipaligned
init.d scripts (BusyBox run-parts) support
Very Fast & Fluid!
Friendly, Fast support
Plus more...
If you like my work and want to support what i do buy me a beer
Thanks:
Roach2010, Rayman84, Gnufabio, And all the other Devs from the Transformer Forum and XDA
Donations:
ValenteL Number 1! +5
KinGDaViD63
​
Code:
[CENTER][B][SIZE="4"][COLOR="Red"]EeeBOMB v1.0.0[/COLOR] - Full ROM[COLOR="Red"][/COLOR][/SIZE][/B]
[I][B]Release Date:[/B] 26 November 2011[/I][/CENTER]
[I][B]Initial Release[/B][/I]
[I][COLOR="Red"][B]**Full Wipe Needed**[/B][/COLOR][/I]
1. Boot into recovery
2. Backup
3. Wipe Data, Cache & Dalvik Cache
4. Flash ROM
5. Boot Tab and setup
DONE
If you like my ROM please hit thanks its much appreciated!​
EeeBOMB v1.0.0.zip​​
User Sig's

Reserved...

Maybe one more

any screenshot? xD

GAME ON said:
any screenshot? xD
Click to expand...
Click to collapse
Will do, its totally stock looking though

Any OC kernel?

lokhor said:
Any OC kernel?
Click to expand...
Click to collapse
Not yet but i will make a patch or add one soon.. still testing, what kernel do you guys use the most or prefer?

oooo hardware acceleration, sexy!
do other roms offer this feature?

Sweet... another ROM Dev!
The biggest props right now go to Roach's Kernel, Blades and co haven't had a source release since August, I dont know what Roach has had over them during the interm time, but it seems to be pretty damn decent if i say so myself... Oh, and the TF201 (Transformer Prime) Kernel Source is out, so hopefully someone will tear it down and see what can be ported over to our TF101 (Transformer)!
And speaking of Roach's Kernel (which sadly lacks UV aka Undervolding to save power), look into the dual core optimized OC daemon and OC Daemon control panel! Best low level OC tool ever... Talk about Mhz speed scaling!
EDIT: yes, most other ROM's support GPU UI Acceleration

Hammerfest said:
Sweet... another ROM Dev!
The biggest props right now go to Roach's Kernel, Blades and co haven't had a source release since August, I dont know what Roach has had over them during the interm time, but it seems to be pretty damn decent if i say so myself... Oh, and the TF201 (Transformer Prime) Kernel Source is out, so hopefully someone will tear it down and see what can be
ported over to our TF101 (Transformer)!
And speaking of Roach's Kernel (which sadly lacks UV aka Undervolding to save power), look into the dual core optimized OC daemon and OC Daemon control panel! Best low level OC tool ever... Talk about Mhz speed scaling!
EDIT: yes, most other ROM's support GPU UI Acceleration
Click to expand...
Click to collapse
Cool thanks I'll try that, and thanks for the welcome. Most of my work is over on the sensation forum but I'll be making some for the Galaxy S2 also. I've mainly made this just for a good stock ROM that's fast and reliable. So I hope you guys like it. Requests and feedback are welcome.

mediumsteak said:
oooo hardware acceleration, sexy!
do other roms offer this feature?
Click to expand...
Click to collapse
+1!
Is hardware acceleration an exclusive of this rom?

zombolo said:
+1!
Is hardware acceleration an exclusive of this rom?
Click to expand...
Click to collapse
I havent checked but i would be suprised if it was
Sent from my GT-I9100 using xda premium

On which version of ASUS ROM do is your ROM based?

Went to give it a try but it just wouldnt connect to the wifi. Rebooted router etc but no joy. Flashed fine and loaded otherwise. Wouldnt connect to open network either.

scottyf79 said:
Went to give it a try but it just wouldnt connect to the wifi. Rebooted router etc but no joy. Flashed fine and loaded otherwise. Wouldnt connect to open network either.
Click to expand...
Click to collapse
Works ok for me where does it get stuck? Anyone else having that issue
Edit.. works fine just did a full wipe and reflash and connects fine for me. If someone else is having this issue as well please let me know
Sent from my GT-I9100 using xda premium

jjurena said:
On which version of ASUS ROM do is your ROM based?
Click to expand...
Click to collapse
Its based on 8.6.5.19 WW

CdTDroiD said:
Works ok for me where does it get stuck? Anyone else having that issue
Edit.. works fine just did a full wipe and reflash and connects fine for me. If someone else is having this issue as well please let me know
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
reflashed and working ok, cheers

Excellent! Might give this a run later.

downloading now, good to see you on transformer (and well done on finally getting dev status!)

zombolo said:
+1!
Is hardware acceleration an exclusive of this rom?
Click to expand...
Click to collapse
debug.sf.hw=1 ---> pretty popular last days. I've heard that Honeycomb has it enabled by default but anyway I use it as well, just to be sure

Optimus 3DMax ROM with 3D Kernel benchmarks

Maybe still many people are asking themselves if they can use Optimus 3DMax ROMs with Kernels for Optimus 3D. Here I show you a picture of my tests with “AcuraTeam_3D_MAX_V1” and “The Promethius Project V1.3” ROMs and 3 different Kernels:
1. 1-V1-Maximo (beta3)
2. Titan V0.6+
3. Promethius V1.3+
4. Maximo Speed V2 1208MHz
Promethius 1.4+, 1.5+ and 1.4.5 are not included since they give me lock in twlan_wq lock and 48% CPU constant load till reboot. 1-V1-Maximo (beta1) and 1-V1-Maximo (beta2) give constant pvr_workqueue CPU usage around 1-5% and that give lower scores in benches and sometimes and *wakelock* with battery drain. For me these are the most stable Kernels.
I use V21E Baseband
The combination between AcuraTeam_3D_MAX_V1 ROM and Promethius V1.3+ give me best scores and long battery life.
All scores are made by taking the highest score from 5 consecutive runs.
CPU set on performance/cfq
FastReboot before the first test.
Have fun with the data
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT:
Added Maximo Speed V2 1208MHz kernel, and AcuraTeam_3D_MAX_V3.1 ROM
As you see there is no more that 1-5% difference between the ROM/KERNEL combinations... so all difference you FEEL is a nice placebo "effect". Nonplacebo is that AcuraTeam_3D_MAX_V3.1/Maximo Speed V2 1208MHz has very long battery life when set to 1008/200MHz and vr I/O Scheduler and less lockups of my WIFI - probably more voltage for WIFI or changed sleep sequence or s.t. else

p-vlad said:
Maybe still many people are asking themselves if they can use Optimus 3DMax ROMs with Kernels for Optimus 3D. Here I show you a picture of my tests with “AcuraTeam_3D_MAX_V1” and “The Promethius Project V1.3” ROMs and 3 different Kernels:
1. 1-V1-Maximo (beta3)
2. Titan V0.6+
3. Promethius V1.3+
Promethius 1.4+, 1.5+ and 1.4.5 are not included since they give me lock in twlan_wq lock and 48% CPU constant load till reboot. 1-V1-Maximo (beta1) and 1-V1-Maximo (beta2) give constant pvr_workqueue CPU usage around 1-5% and that give lower scores in benches and sometimes and *wakelock* with battery drain. For me these are the most stable Kernels.
I use V21E Baseband
The combination between AcuraTeam_3D_MAX_V1 ROM and Promethius V1.3+ give me best scores and long battery life.
All scores are made by taking the highest score from 5 consecutive runs.
CPU set on performance/cfq
FastReboot before the first test.
Have fun with the data
View attachment 1138919
I wish there is Promethius V1.3+ Kernel with -Lowered Voltages and minimal MHZ and Lowered Deep Sleep Delay
Click to expand...
Click to collapse
Thanks for the Chart man.
AcuraTeam Rom not bad . Hows the video recording @1080p, what score do you get with 1.4+ ,1.5

Do you do any thing special to flash a 3D Max ROM?
Sent from my LG-P920 using Tapatalk

defcomg said:
Thanks for the Chart man.
AcuraTeam Rom not bad . Hows the video recording @1080p, what score do you get with 1.4+ ,1.5
Click to expand...
Click to collapse
AcuraTeam Rom with Promethius V1.3+ Kernel have good @1080p and 3D 720p recording - no glitches. For Maximo and Titan V0.6+ i have not test.
I have test the 1.4+ ,1.5 but as they were giving me problems I have not record these scores but there was not s.t. I should remember or striking.
Franzferdinan51 - I just install it over “The Promethius Project V1.3” with CWM. All programs and data stay there. I change it back to “The Promethius Project V1.3” by mistake and then again to “AcuraTeam_3D_MAX_V1” and still was all OK. Of course I took full backup on my system before i did that all.

Okay thank you I noticed xda don't have a 3D Max forum where can I find 3Dmax roms
Sent from my LG-P920 using Tapatalk

Franzferdinan51 said:
Okay thank you I noticed xda don't have a 3D Max forum where can I find 3Dmax roms
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
http://www.wuala.com/caroceiro/optimus 3d/roms/acura/optimus 3d -3dMAX/?lang=en

@TS
i tried to flashed it (3d max rom v2) over to my stock p920 v21e rom but after flashing and reboot my phone it stays on LG LOGO only.. nothing happens..
any help?

JastaPein said:
@TS
i tried to flashed it (3d max rom v2) over to my stock p920 v21e rom but after flashing and reboot my phone it stays on LG LOGO only.. nothing happens..
any help?
Click to expand...
Click to collapse
Acura 3D MAX V2 use pure ext4. You can not flash it over another ROM on ext3. I have used V1 in my tests as it is written in my first post.

So how do u flash. Properly to make it work
Sent from my LG-P925 using xda app-developers app

p-vlad said:
Acura 3D MAX V2 use pure ext4. You can not flash it over another ROM on ext3. I have used V1 in my tests as it is written in my first post.
Click to expand...
Click to collapse
Im sorry but i really dont know how to use EXT 3 or 4 .. Can you help us how to properly flash it?
Step by Step Tutorial is a great idea for all Optimus 3D Users

JastaPein said:
Im sorry but i really dont know how to use EXT 3 or 4 .. Can you help us how to properly flash it?
Step by Step Tutorial is a great idea for all Optimus 3D Users
Click to expand...
Click to collapse
it's so easy to install... search on google acurarom 3dmax v3.1... on htcspain...on the first page you find all you need

UPDATE (15.07.2012)
KERNEL: Maximo Speed V2 1208MHz
ROM: AcuraTeam 3D MAX V3.1

[Kernel][9/5] - CleanKERNEL 1.2 -★| CPU OC 1.99 | GPU OC 300/500 | UV | VRALG1 |★-

[Kernel][9/5] - CleanKERNEL 1.2 -★| CPU OC 1.99 | GPU OC 300/500 | UV | VRALG1 |★-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!​
Features
CPU Overclockable to 1.99 GHZ (vs 1.5GHZ stock).
CPU Underclockable to 192MHZ (vs 384MHZ stock).
The CPU comes clocked at normal Samsung specs of 384MHZ low and 1.5GHZ high. You will need an application like System Tuner or Set CPU to overlcock it. This can also be modified by advanced users in the init.rc but is not recommended or supported. See first two blocks of init.rc for details.
GPU Overclocked at 300/500 MHZ
Under-volted just a few milli-volts to help save battery.
There are no fancy governors or other such things. Its a modified stock kernel, plain and simple.
This kernel should be compatible with any VRAGL1 based ROM such as (of course) CleanROM and Nosympathy's stock rooted base. Good chance it will work well with Team Synergy's ROM too but I have not tested that ROM but its a VRALG1 Based ROM.
If your ROM has non Samsung Boot Animation you will more than likely loose it!
Its been said that flashing a kernel can cause IMIE loss. I have not seen it myself but I guess its possible.
This kernel will NOT work with any AOSP, AOKP, CM9, CM10, etc based ROMS! If the ROM is not a based on official Verizon VRAGL1 ROM then dont flash this kernel!
Instructions
Must have an UNLOCKED BOOTLOADER! No exceptions!
Should make a complete Nandroid back up before flashing!
Copy ROM to storage and flash
Use your favorite CPU controller app to set the speeds.
WARNING!
Overclocking can permanently ruin your device. I mean totally kill it! You accept this fact upon downloading the kernel and or source!
I cannot and will not take any responsibility for what this kernel does to your device!
Not all devices can maintain the same level of overclocking!
Just because the kernel can clock to 1.89 does not mean YOUR device can!
Be smart and start off low and bring upt the speed gradually just like O/C'ing a desktop CPU!
To return to what you had before this... Restore your Nandroid back up! You did make that back up, right?
Changes in this version
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed: gsiff_daemon fix?
Added: Optimaztions to file system
THANKS!
Thanks to dsb9938 for helping me get my box set up and to sbryan12144 for schooling me on the edits to make. Without their help I would still be looking at an empty Ubuntu desktop wondering where to go!
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!​
Downloads
Kernel HERE
MD5: F69F8AA037DCA3C03D5E6B22656FE684
Source HERE
MD5: 20907545F7CD5DF5717EA0101FFF054F
Donations accepted but not expected :angel:
Please hit Thanks and Rate the thread 5 Stars
Click to expand...
Click to collapse

Benchmarks dont matter! But your going to ask anyways so I already ran the three most popular benchmarks and the results are below. Your device and ROM set up may NOT acheive these benchmarks.
All testing was done on a fresh install of CleanROM 2.0 SP1 with no background sync 1.89GHZ and Ondemand governor.
These benchmarks are the best of 3 or 4 runs each. They didint vary too much from this except Linpack. That thing is all over the place.
Do not expect to get these scores!
Next your going to ask me how the battery life is. Being a new kernel it doesnt have as much metering under its belt so you I will need your input on what you see. Obvisouly if you clock it up high you will see a decrease in battery life. Let me know what you are seeing.

Change Log
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed:gsiff_daemon fix?
Added: Optimaztions to file system
8/24/2012 - Version 1.0
Initial Release

looks awesome

Excellent work!
Sent from my SCH-I535 using xda premium

WizeGuyDezignz said:
Excellent work!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thank you man!

on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post

Karl said:
on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post
Click to expand...
Click to collapse
MD5's posted....
As stated in OP...
This kernel is based of the Samsung stock kernel for the Verizon based SGS3. The kernel does not deviate from the stock kernel except as noted below...
Click to expand...
Click to collapse
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?

scrosler said:
MD5's posted....
As stated in OP...
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?
Click to expand...
Click to collapse
my bad just glanced at the op :silly:

Karl said:
my bad just glanced at the op :silly:
Click to expand...
Click to collapse
Its all good. I will post modified RAM disk that supports non Samsung boot animations later on... I just want to get a feel right now for the kernel and how it works out for people.
EDIT: But you do bring up a good point... I will post in the OP that you will loose custom boot ani's.

Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:

joaquinla1 said:
Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:
Click to expand...
Click to collapse
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.

scrosler said:
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.
Click to expand...
Click to collapse
I'm using CPU master and after clicking apply like 10 times it stuck at 192.

Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.

Good job man

joaquinla1 said:
I'm using CPU master and after clicking apply like 10 times it stuck at 192.
Click to expand...
Click to collapse
Nah, its sticking when you apply, but the thermald config may need some tweaking because it pushes it back up. So it doesnt seem like its sticking but its but then it gets overwritten.
Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
Wow, Thats crazy!
How does that happen?

sbryan12144 said:
Good job man
Click to expand...
Click to collapse
I learned from the best!

Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
please provide reference

Karl said:
please provide reference
Click to expand...
Click to collapse
Dont stress it... He said what he had to say. Maybe he is right. I put in the OP so...
Lets get to some feedback on the kernel itself...

This thing is lightning fast and has same battery life as stock. Been hammering on it all night
Sent from my Nexus 7 using Tapatalk 2

[KERNEL][JB-4.1/4.2][2/09/13] All-Star Devs Kernel Beta

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS:
ASDK 1.0
(All-Star Devs Kernel)
Features for 4.1.2 Version
Linux kernel 3.0.49
GPU clock to 320MHz
Governors (ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY,WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Max OC 1.9ghz (PLEASE DON'T OC TO 1.9 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Fast Charge
Only for AOSP Roms running 4.1.2
My ASDK Controller app is included
Features for 4.2.1 Beta Version
Linux kernel 3.0.62
Overclocking
Max OC 1.9ghz (PLEASE DON'T OC TO 1.9 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Only for AOSP Roms running 4.2.1 (SO FAR FOR AOKP 4.2.1 & CM10.1)
My ASDK Controller app is included
Click to expand...
Click to collapse
Download
Size: 7.69 MB
MD5: 11eeb5680426c97d69e6c5fb5d7b0a77
Download: http://tinyw.in/VDhM[/SIZE]
CHANGES DETAILED HERE: http://forum.xda-developers.com/showpost.php?p=37052058&postcount=32
4.2 Beta
Size: 9.38 MB
MD5: 09d11c4490170552ab940f57f82ab480
Download: http://tinyw.in/RBCA
​
Click to expand...
Click to collapse
Credit/Thanks
Click to expand...
Click to collapse
​
BIGGEST THANKS TO DAGR8 FOR HIS KKO KERNEL AS IT WAS THE BASE FOR ASDK KERNEL FOR SGS2
Ktoonsez
Imoseyon
Thomas.raines
Krazeecracker
Android88
Ptmr3
Click to expand...
Click to collapse
Feedback format if you are having problems
Governor:
Rom:
Overclock settings:
Undervolt settings:
Click to expand...
Click to collapse
​
GITHUB: https://github.com/Ayysir/ASDK-sgs2/commits/asdk-4.1

Thanks so much

It's amazing how fast this community got reactivated. Lol
Thank u developers
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

About to flash will report back

originally built this for hercules, but wanted to share it with you guys
camera is a bit laggy btw, trying to find out what is causing it

Rotation is borked :\

likely you will have to flash rotation fix, Do SR have one ?
http://forum.xda-developers.com/showthread.php?t=2100105
try this

flashed your kernel on cm 10.1 preview 2 and phone is not doing anything after samsung boot logo. dark screen :crying:

ayysir said:
likely you will have to flash rotation fix, Do SR have one ?
http://forum.xda-developers.com/showthread.php?t=2100105
try this
Click to expand...
Click to collapse
for some reason the rotation fix doesn't work on 4.2

Will try to look into it. I'm a fish out of water when it comes to rotation bs
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

wali01x said:
flashed your kernel on cm 10.1 preview 2 and phone is not doing anything after samsung boot logo. dark screen :crying:
Click to expand...
Click to collapse
Which build did you flash?
Sent from my Nexus 4 using xda premium

stuck
Governor: ondemand
ROM: cm 10.1 preview 2
Overclocking: stuck at 1.9
Undervolt: don't mess with that
Everytime i try to underclock or go to 1.5 ghz it just shoots back up to max. Other than that great job

1.83ghz overclock stable voltage
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing

mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
There are 2 other 4.2.2 kernels. You decided to choose a 4.2.2 kernel that is in beta, and released 3 months ago. Mind trying Marla or Moretz?

mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
Moretz is pretty bad$$ my opinion
Sent from my I727 running something kewl.

immaeetuu said:
There are 2 other 4.2.2 kernels. You decided to choose a 4.2.2 kernel that is in beta, and released 3 months ago. Mind trying Marla or Moretz?
Click to expand...
Click to collapse
Maybe he just likes this kernel. . . .
Sent from my SGH-I727 using xda premium

mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
That is never going to be stable. Bump down
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

bzzybfrm313 said:
Governor: ondemand
ROM: cm 10.1 preview 2
Overclocking: stuck at 1.9
Undervolt: don't mess with that
Everytime i try to underclock or go to 1.5 ghz it just shoots back up to max. Other than that great job
Click to expand...
Click to collapse
I will have to test. Sorry just been busy building PA roms
Sent from my SGH-T999 using Tapatalk 2

mmikeman said:
Love this kernel but just cant stay stable on 1.83ghz, I heard that this clock likes a specific voltage on this forum, anyone know what voltage it works best at? I tried stepping it down a little and still kept freezing
Click to expand...
Click to collapse
There are much newer builds of this kernel in the hercules forum. You could flash those, just you might have rotation issues if you don't keep the skyrocket rotation files (PM me for more info).
Sent from my Nexus 4 using Tapatalk 2

Ill try the hercules ones, mortez I don't think can go to 1.83ghz, that is really pushing it for the phone didn't expect it to be doable when it did work though I did see a performance gain from 1.78ghz and not a lot of heat being generated either, had it stable overvolted 1375mv for a little to then it died on me in a 3d game -_-