[Q] (Q) HTC HD2 stuck on CyanogenMod booting screen - General Questions and Answers

I installed on my htc hd2 android rom JellyBean 4.1.2 from tytung when i complete install it wanna to reboot telephone. I rebooted him and after that is here HTC logo it go away and next is stuck on CyanogenMod screen there is some light cycling around circle. I tried delete cache and dalvik cache nothing changed help please.

milldas said:
I installed on my htc hd2 android rom JellyBean 4.1.2 from tytung when i complete install it wanna to reboot telephone. I rebooted him and after that is here HTC logo it go away and next is stuck on CyanogenMod screen there is some light cycling around circle. I tried delete cache and dalvik cache nothing changed help please.
Click to expand...
Click to collapse
Can you tell me what HBoot / Firmware / CID you're on?
AND
Why the he.. you change partition sizes?????

I tried both "NexusHD2-KitKat-CM11.0_V4.0.zip" and "ChauTien CM11 4.4.2 V1.0.zip" ROMs with no luck.
Both stuck at the same stage(cycling circle).
Somebody told me change the syspart size.

Related

[Q] MIUI on desire not working please help

hey
i have a problem when installing rom MIUI on my desire. i boot into recovery and then wipe and cache data... then i instal the rom and i restar the fone, which usually works with other roms. then when it loads a bit it shows just a blank white screen with htc on the midle starting over and over again.
i tried several versions but all with the same result, only one worked but it was half chinese.
maybe others don't work because i don't have enaugh space or something?
am i doing something wrong? please help

[Q] Request for help with HTC Evo 3D ROMs

Hello guys. I really need your help right now.
I have rooted HTC Evo 3D GSM. I have used this technique: http://forum.xda-developers.com/showthread.php?t=1248231
And I have used ROM KingCobra3D. But recently I have problems with 2D photos capture. Result is just grey stripes. So I have decided to restore my original ROM backup and perform just official ICS update. But, when I have started to install the update. It just shows white triangle and orange [!] with blue android.
I have readed one topic about this and I realised that I cant perform official ICS update. So I have decided to just install another ROM. But.. I have big problem now. When I install some custom ROM with classic DATA/CACHE WIPE and WIPE DALVIK CACHE. But... when I install the ROM. It lags in boot animation... I have tried to wait at least 15 minutes and nothing happened. I have tried to do hard reset, but it had same problem.. still lag in boot animation. It was Evolver3D ROM... so I have decided to use another.. but every other ROM stucks in boot animation. When I get to boot animation, it just reboot and in boot animation it reboots again. Only rom which is working ic Cyanogenmod 9, but I dont want it. So I am practicaly stuck in original ROM. Backup works at least.
Do you have any helpful tips? If the solution is not exactly simple, I would appreciate help via Skype or something like that.
Thanks

[Q] Flashed cyanogen mod 10.1, stuck at boot animation

I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.

[Q] HTC Sensation stuck on htc logo, screen turn black then htc logo again.....

Hi, I am new here. I have unlocked boatloader but still S-ON. Previously installed various kind of roms using 4EXT recovery (enabling smartflash) and all of them work well. Problem comes after I clear my google service framework's data. When flashing a rom using the same method previously (4EXT recovery) then come to reboot, it stuck on HTC logo now and screen turn black after approximately 15 seconds then HTC logo again then turn black and HTC logo again then turn black.... previously this problem never happen to me as i just faced stucking on either htc logo or cyanogenmod logo only before. I am really worry bout my phone now, hope to listen any experience and solution from u guys~ thx~
If you coming from Gingerbread ROM and trying to install ICS you need a ICS firmware if not just flash the ROM again but wipe everything except sdcard
Sent from my HTC Sensation using xda app-developers app
cakaostojic said:
If you coming from Gingerbread ROM and trying to install ICS you need a ICS firmware if not just flash the ROM again but wipe everything except sdcard
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Actually i am quite confuse bout all these. I dunno bout flashing kernel or firmware.. everytime when flashing new rom I just use 4EXT (enabling smartflash) since this method works for me and it is easy. Previous roms all no problem, didn't stuck on htc logo or the rom booting screen. I have tried CM10, CM10.1, vipers v1.6.3, elegancia rom, codenamelungo etc roms all no problem before. Latest rom that I use is CM10.1 but there is a gps bug. When read through all the post in the forum, some saying just clear the data of google service framework will fix the gps bug, but it not works for me. So after that i decide to restore to my previous rom (cm10) but when booting, it stuck on htc logo for few seconds then the screen turn black, then htc logo again and turn black and again and again. Previous this my phone only either stuck on htc logo or the Cyanogenmod man bootloop only, but not htc logo then turn black again and again. Wondering what is the problem... I have tried to flash the cm10 rom and gapps but when come booting the problem is still the same. I have also tried flashing rom that come with kernel (darkforest rom) but it is still the same problem. May u help me? this is my only phone... thx:crying:

[Q] JB wont boot

Hi All,
I have an unlocked HTC Desire S with HBoot 2.00.002. I am running miuiandroind_saga_ics-3.2.22.zip. I tried to install the latest release from miuiandroid_saga_jb_3.7.26.zip. But the phone wont boot. It just shows a blank black screen. I know the phone is on but the screen stays blank.
I have done the regular, clear dalvik cache, batt status...etc for a clean install.
I tried other JB roms, ICS roms. And all of show the same blank screen. I am forced to go back to miuiandroind_saga_ics-3.2.22.zip. Which is the only ROM that seems to be working. I am not sure how to start debugging the problem and fix it. Any help is appreciated.
/Amit
Try basic troubleshooting mixed with searching and reading.
Check;-
hBoot
LCD panel
boot.img

Categories

Resources