[Q] MIUI on desire not working please help - General Questions and Answers

hey
i have a problem when installing rom MIUI on my desire. i boot into recovery and then wipe and cache data... then i instal the rom and i restar the fone, which usually works with other roms. then when it loads a bit it shows just a blank white screen with htc on the midle starting over and over again.
i tried several versions but all with the same result, only one worked but it was half chinese.
maybe others don't work because i don't have enaugh space or something?
am i doing something wrong? please help

Related

[Q] Request for help with HTC Evo 3D ROMs

Hello guys. I really need your help right now.
I have rooted HTC Evo 3D GSM. I have used this technique: http://forum.xda-developers.com/showthread.php?t=1248231
And I have used ROM KingCobra3D. But recently I have problems with 2D photos capture. Result is just grey stripes. So I have decided to restore my original ROM backup and perform just official ICS update. But, when I have started to install the update. It just shows white triangle and orange [!] with blue android.
I have readed one topic about this and I realised that I cant perform official ICS update. So I have decided to just install another ROM. But.. I have big problem now. When I install some custom ROM with classic DATA/CACHE WIPE and WIPE DALVIK CACHE. But... when I install the ROM. It lags in boot animation... I have tried to wait at least 15 minutes and nothing happened. I have tried to do hard reset, but it had same problem.. still lag in boot animation. It was Evolver3D ROM... so I have decided to use another.. but every other ROM stucks in boot animation. When I get to boot animation, it just reboot and in boot animation it reboots again. Only rom which is working ic Cyanogenmod 9, but I dont want it. So I am practicaly stuck in original ROM. Backup works at least.
Do you have any helpful tips? If the solution is not exactly simple, I would appreciate help via Skype or something like that.
Thanks

[Q] (Q) HTC HD2 stuck on CyanogenMod booting screen

I installed on my htc hd2 android rom JellyBean 4.1.2 from tytung when i complete install it wanna to reboot telephone. I rebooted him and after that is here HTC logo it go away and next is stuck on CyanogenMod screen there is some light cycling around circle. I tried delete cache and dalvik cache nothing changed help please.
milldas said:
I installed on my htc hd2 android rom JellyBean 4.1.2 from tytung when i complete install it wanna to reboot telephone. I rebooted him and after that is here HTC logo it go away and next is stuck on CyanogenMod screen there is some light cycling around circle. I tried delete cache and dalvik cache nothing changed help please.
Click to expand...
Click to collapse
Can you tell me what HBoot / Firmware / CID you're on?
AND
Why the he.. you change partition sizes?????
I tried both "NexusHD2-KitKat-CM11.0_V4.0.zip" and "ChauTien CM11 4.4.2 V1.0.zip" ROMs with no luck.
Both stuck at the same stage(cycling circle).
Somebody told me change the syspart size.

The most weird problem!!

So,i am been facing this since about 3-4 days.I faced this problem on cm10 beta6 as well as on jaggy rom 4!
Whenever i reboot my phone,the phone gets stuck on the HTC splash screen and then never boots up.What i have to do is flash the rom again.Happened couple of times on cm10(the last time when it happened was when i changed my lcd density from 100 to 160); so i thought to flash jaggy rom 4.After flashing the rom and configuring m2sd i rebooted the device but it again stuck on the White HTC splash screen.
Any help would be appreciated.
Thank You.
salil.bajaj said:
So,i am been facing this since about 3-4 days.I faced this problem on cm10 beta6 as well as on jaggy rom 4!
Whenever i reboot my phone,the phone gets stuck on the HTC splash screen and then never boots up.What i have to do is flash the rom again.Happened couple of times on cm10(the last time when it happened was when i changed my lcd density from 100 to 160); so i thought to flash jaggy rom 4.After flashing the rom and configuring m2sd i rebooted the device but it again stuck on the White HTC splash screen.
Any help would be appreciated.
Thank You.
Click to expand...
Click to collapse
Even i faced the same issue in sense 4 (flyrom) I figured out that titanium back up was causing the issue
When ever I restore apps using titanium backup and when I restarted the phone it used get stuck at HTC screen and when I install apps manually I faced no issue Hope this helps
Sent from my HTC Explorer using xda premium
hey installed FLYROM v4....i havnt tried CM roms....what i did fr flashing FLYROM z i flashed yannou09z recoverry which z available on jaggyjaggs rooting tutorial....i use twrp nd other recveries....but wen i flash new rom it stuck on htc logo screen...so i flashed back to yannous....i then partitioned ma mmry card in ext4 through minitool wizard of 1 gb...then i wiped dalvich cache nd then i wipe data/factory reset thru recovery nd flashed flyrom...it wrks smoothly now....i recmnd yannous recovery fr pico....rest z uppon yu.... nd dnt mount sd card thru any apps...flyscript automatically install apps to sd ext..
Same issue here too. everytime i reboot, the phone gets stuck on HTC logo. sometimes pulling the battery out and then inserting again does the job as well as wiping the caches too. But other times flashing another rom is the only option. a solution would be much appreciated.
And sometimes it takes forever to get past the htc screen and get the os up( happened only once, took more than half an hour to get past HTC logo. Weird)
pico is on CM9 and TWRP.
Edit: faced this issue a few minutes ago and when it finally booted i lost touch responce. The screen is not responding to touch !!! wth is wrong with it! :'/
You said you flashed m2sd. You sure the rom supports m2sd? Derefas has his own memory script for the Sense4A.
If i was you, i would try flashing again without flashing any memory script.
Sorry i didn't see JaggyRom 4. Why don't you install an ICS rom and try.

[Q] JB wont boot

Hi All,
I have an unlocked HTC Desire S with HBoot 2.00.002. I am running miuiandroind_saga_ics-3.2.22.zip. I tried to install the latest release from miuiandroid_saga_jb_3.7.26.zip. But the phone wont boot. It just shows a blank black screen. I know the phone is on but the screen stays blank.
I have done the regular, clear dalvik cache, batt status...etc for a clean install.
I tried other JB roms, ICS roms. And all of show the same blank screen. I am forced to go back to miuiandroind_saga_ics-3.2.22.zip. Which is the only ROM that seems to be working. I am not sure how to start debugging the problem and fix it. Any help is appreciated.
/Amit
Try basic troubleshooting mixed with searching and reading.
Check;-
hBoot
LCD panel
boot.img

Boot problem PLEASE HELP

Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
khafaga said:
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
Click to expand...
Click to collapse
hi please let me know if you got xoom fixed ?
I have similar issue after installing CM10.1 , tablet stucked on boot logo and because none of my volume buttons work I have no idea how to fix is ! ?
have this tablet for 3 years , it's a lot of stuff there

Categories

Resources