***ONLY VERIZON GS3***
A lot of people have been having problems with flashing CM10.1 and the SlimBean 4.2.1 beta. This guide will tell you how to fix the data. At first it looks like you lost your IMEI, but you probably didn't. It is a simple fix.
What you will need:
Odin: http://samsung-updates.com/Odin307.zip
Stock Rom: https://www.dropbox.com/s/wjaifmod7d78lt0/stock.vzw_root66.tar
Instructions:
1. Go into Odin put the stock rom into the PDA part and make sure the check mark next to it is checked.
2. Boot into Download mode by hitting Volume Down + Power + Home
2. Make sure only "Auto Reboot" and "F. Reset Time" are checked under options (if not you can seriously mess up your phone).
3. Flash the stock rom using Odin.
4. Once it says pass in Odin take your phones battery out and boot into recovery by hitting Volume Up + Power + Home.
5. Hit wipe data/factory reset (your phone should restart)
6. Hit the bottom left then right then left then right then volume up to pass activation.
7 Then type *2767*3855# into the phone once you set it up (you shouldn't have to press call).
Now you phone should be fixed, and you should be able to root, unlock your boot loader and try again.
Tip:
When flashing SlimBean 4.2.1 beta 1 and CM10.1 use a dirty flash over a 4.1.1 or 4.1.2 rom.
- Dirty flash is when you don't clear your data before you flash.
thanks
Trying this now, I have been working all day to fix this.
I first ran into problems yesterday, cm10 ran out of room, removed a bunch of stuff( my back ups). Did some flashing and reverting and such. Now i seem to be stuck in roam mode.
Questions: What is the point of step 5?
It just says to load into recovery then next step is once the phone is loaded.
There is no step 6.
Haigot said:
Trying this now, I have been working all day to fix this.
I first ran into problems yesterday, cm10 ran out of room, removed a bunch of stuff( my back ups). Did some flashing and reverting and such. Now i seem to be stuck in roam mode.
Questions: What is the point of step 5?
It just says to load into recovery then next step is once the phone is loaded.
There is no step 6.
Click to expand...
Click to collapse
Sorry I'll fix that I was in a rush to get this finished before work.
This works!
But if you are still interested in CM10.1 you can still flash it with data working!
I decided to go out on a limb and tried going from ICS (VRALG1_odex) rooted/unlocked (after using provision code and getting data back) to CM10.1. To my surprise I found I flashed fine and had data!
I highly suggest using this ROM (http://www.sundergaming.com/downloads/sch-i535/tw/VRALG1_Odex.zip) as it uses its own UI when flashing it from recovery and will keep both ROOT and UNLOCKED BOOTLOADER when installing.
My guess is the problem seems to lie somewhere between a tw rom 4.1.1 JB and cm10.1
Luckly I don't have to deal with this and everything rolled over perfectly for cm10.1
Wow, I wished you had posted this before I returned my phone to the store for a warranty replacement!
Would have saved me a few days of agony, flashing and re-flashing that's for sure. Thanks for sharing though! It's good to know there is a fix for this.
You don't have to do this. This happened to me. Flash cm10.1 without any g apps. This will take u past the activation screen. Go into settings and change mobile network settings to SIM and automatic. Reboot phone. Make sure you have data, phone, and sms. Boot into recovery and flash away. U should have everything back on whatever Rom u choose.
Sent from my SCH-I535 using xda app-developers app
When you boot into recovery, just reboot?
and when i typed in the number, it didnt do anything....
P8ntballa57 said:
When you boot into recovery, just reboot?
and when i typed in the number, it didnt do anything....
Click to expand...
Click to collapse
Sorry I posted this in general and android development because I wasn't sure witch one it was, and when I fixed that I forgot to fix it here but I did now.
I can confirm this worked for me!
But, I couldn't get passed the activation screen in order for me to dial the code to reset phone so what I had to do was tap on the bottom of the screen as follows= Tap Left -Tap Right- Tap Left- Tap Right- then Volume up to get out of activation screen then was I able to dial the code to reset my phone. Thank you for this guide op!!!!
i wish i would have seen this yesterday. after trying to flash CM10.1 and getting stuck in roaming for a day in a half, i had to return mine to Costco and get a new one.
zaccat4 said:
Tip:
When flashing SlimBean 4.2.1 beta 1 and CM10.1 use a dirty flash over a 4.1.1 or 4.1.2 rom.
- Dirty flash is when you don't clear your data before you flash.
Click to expand...
Click to collapse
so just to make sure if im on CM 10.0 stable, if i flash the CM 10.1 without wiping or doing a factory reset, i wont go into roaming mode again? I apologize for possibly repeating you but ive had alot of trouble with this.
Ryan92019 said:
so just to make sure if im on CM 10.0 stable, if i flash the CM 10.1 without wiping or doing a factory reset, i wont go into roaming mode again? I apologize for possibly repeating you but ive had alot of trouble with this.
Click to expand...
Click to collapse
not necessarily. I did this and I was stuck in roaming but all I had to do was go into wireless settings/mobile network settings and make sure my preferred network was set to LTE/CDMA
you can do all this while your phone is trying to activate.
Anyone have an idea for a better file hosting site?
Will this work on a US Cellular phone?
This site has no section for US Cellular.
nmeseth said:
Will this work on a US Cellular phone?
This site has no section for US Cellular.
Click to expand...
Click to collapse
No you have to get a file for your phone or else you could hard brick it.
zaccat4 said:
No you have to get a file for your phone or else you could hard brick it.
Click to expand...
Click to collapse
I just got a stock ROM for USC, if I use that will these instructions work?
nmeseth said:
I just got a stock ROM for USC, if I use that will these instructions work?
Click to expand...
Click to collapse
Im not sure if the number will work either, it may just be a Verizon thing.
I tried flashing 4.2.1 ROM just to check it out before putting my phone back to stock for a replacement and it borked my network. I tried the method mentioned in the OP and it works great, thanks.
Thank you so much.....you saved my butt and now my phone is working again. Guess I should stop flashing a new rom every couple weeks.
Related
I tried to flash cm10 rom and it never would get past starting apps. I used the new recovery that I beleive beans had reated to install cm9. Then when I tried to reboot i got the verizon non authorized software message. I went back and odin back to root66 and could not get network connection. i have tried factory reset and doing over and over again with now luck. does anyone know why its not letting me on network
pitmanr2003 said:
I tried to flash cm10 rom and it never would get past starting apps. I used the new recovery that I beleive beans had reated to install cm9. Then when I tried to reboot i got the verizon non authorized software message. I went back and odin back to root66 and could not get network connection. i have tried factory reset and doing over and over again with now luck. does anyone know why its not letting me on network
Click to expand...
Click to collapse
where did you get cm10 for the vzw phone? I thought it was for all of the other phones but vzw? Try going back to stock non root. try flashing the modems in the thread about this one.
phillyphill39 said:
where did you get cm10 for the vzw phone? I thought it was for all of the other phones but vzw? Try going back to stock non root. try flashing the modems in the thread about this one.
Click to expand...
Click to collapse
if you go to goo app its in his folders of roms i beleive. i have tried that. i switched to my wifes sim card and got same results, so must be something on the phone
pitmanr2003 said:
I tried to flash cm10 rom and it never would get past starting apps. I used the new recovery that I beleive beans had reated to install cm9. Then when I tried to reboot i got the verizon non authorized software message. I went back and odin back to root66 and could not get network connection. i have tried factory reset and doing over and over again with now luck. does anyone know why its not letting me on network
Click to expand...
Click to collapse
Flash the stock tar.md5 from here: http://samsung-updates.com/device/?id=scH-i535
Whatever you flashed put a custom kernel on there, and that's why you get that message.
pitmanr2003 said:
I tried to flash cm10 rom and it never would get past starting apps. I used the new recovery that I beleive beans had reated to install cm9. Then when I tried to reboot i got the verizon non authorized software message. I went back and odin back to root66 and could not get network connection. i have tried factory reset and doing over and over again with now luck. does anyone know why its not letting me on network
Click to expand...
Click to collapse
I don't mean to be rude, but development is not for questions
timothydonohue said:
I don't mean to be rude, but development is not for questions
Click to expand...
Click to collapse
no offense taken, but with only one question and answer section and that for all cell services could make this question a little different
pitmanr2003 said:
no offense taken, but with only one question and answer section and that for all cell services could make this question a little different
Click to expand...
Click to collapse
I have d2hackers cm10 up and running on my device...click link in sig!
i have tried new modem and fully stock rom. no luck. I was running dual boot before that if that could of caused issue. I am lost now.
pitmanr2003 said:
i have tried new modem and fully stock rom. no luck. I was running dual boot before that if that could of caused issue. I am lost now.
Click to expand...
Click to collapse
I am lost. i have tried everything and i am now where a beginner when it comes to android. Im afraid that if i take it back they will see it has been rooted.
pitmanr2003 said:
I am lost. i have tried everything and i am now where a beginner when it comes to android. Im afraid that if i take it back they will see it has been rooted.
Click to expand...
Click to collapse
wipe data then odin a factory stock image
droidstyle said:
wipe data then odin a factory stock image
Click to expand...
Click to collapse
tried that still wants to roam.
pitmanr2003 said:
tried that still wants to roam.
Click to expand...
Click to collapse
I have tried to odin stock and then wipe. still showing no data connection, and same thing when I put my wifes sim in. IM thinkiing it has something to do with the dual boot i had set up before. is there a way to repartion the internal sd card or emmc?
This seems to be happening to a lot of people flashing AOSP ROMs....this is why they warn you they are not responsible for what happens to your phone...especially with Betas.
There are many threads on this and several on how to get a workaround until someone figures out how to fix this.
Try doing a search on losing IMEI or roaming after flashing CM10...it is happening a lot...that is why I am just using rooted stock with VZW apps and TW frozen.
this problem I was having with no data or radio in CM10.
I used ODIN to go back to stock rooted (root 66).
When I did that I was boot looping in the puking rainbows 4GLTE boot animation.
I eventually figured out how to fix that by booting into recovery (press volume up, home button, and power button at the same time till phone boots). I then did a wipe data/factory reset.
My phone then booted fine into stock root.
I then proceeded to punch in *2767*3855# into my dialer immediately when I got stock root working. That did some sort of a factory reset / format. It all happened so quick I could barely read what it told me. The phone rebooted after a while.
I then downloaded EZ-Recovery for VZW Galaxy S3 app from the Play store.
I installed the custom recovery from Dhacker's CM10 post over on the droidhive forums using EZ recovery.
I also downloaded the CM10 file to flash and the Jelly Bean Google Apps file.
Rebooted into recovery, Wiped data/cache/dalvik.
Installed the CM10 file.
Installed the Jelly Bean apps.
Reboot.
Profit.
I now have a largely functional CM10 (as far as I can tell there are some camera issues). Data 3G/4G is working, so are calls and text and everything is dandy.
Did the *27 bla bla thing posted above and back to normal. Thanks everyone
Sent from my SCH-I535 using XDA App
NOTE: This is for the Verizon Wireless Samsung Galaxy S3 SCH-I535
Since I'm a new member I wasn't allowed to post this into the developers forum and before I continue: YES, I have searched valiantly for a fix to my particular problem and I spent the entire day new years and most of the day today trying to get CM10.1 to run on my SCH-I535 but ran into problem after problem. Every time I installed any version of CM10 or higher I ran into multiple problems: mainly being that I wasn't able to attain signal, the keyboard wouldn't load or there would be multiple problems with initial setup including having to restart during install so many times I gave up. In the past two days I have Odined back to stock at least 15+ times trying to get CM to run and now that it finally is I believe this is worth sharing.
Before I continue I should mention that your phone should be properly working so if you're in stock and you can't make phone calls or your IMEI is messed up then none of what I'm about to mention is going to work. After you Odin to stock using Root66.tar (http://www.megashare.com/4384479) then type *2767*3855# to reset to factory defaults everything should be running correctly. If not you may have bricked your phone or you have bigger problems for which I cannot help you and I apologize. There's also a torrent file available of the above stock tar file that downloads much faster here: http://forum.xda-developers.com/showthread.php?t=1840030.
So I assume, before I start this, that if you're on these boards you know how to properly root, unlock and flash then recover your phone through CWM 6+. If you do not know how to do this, then you will need to before continuing on.
Use this link: http://forum.xda-developers.com/showthread.php?t=1762709
Now follow Section 1 and pay attention to detail because if you don't you can mess something up and end up having to backtrack which can take valuable time and be amazingly frustrating.
Once these things are done you will need to reboot your phone back out of Recovery mode so you can properly move the necessary zip files onto your internal SD card.
Download CM10 Stable, you can find this here: http://get.cm/?device=d2vzw&type=stable
And download Gapps 4.2.1 here: http://www.teamandroid.com/gapps/ (I used version gapps-jb-20121212-signed.zip)
Put these files on your internal SD card and use EZ Recovery to Flash and then Reboot Recovery, I need to mention as well that when I dragged both of these zip files onto my internal SD I had EZ Recovery open while doing so. I don't know if that had anything to do with it but I thought it was worth mentioning. Clear the cache and data/factory reset then install CM10 followed by Gapps that you installed on the SD earlier.
Once you boot up you should have the phone working but the keyboard will constantly flash a message that it can't run, don't worry about that right now. Now download a nightly version of CM10.1 located here:http://get.cm/?device=d2vzw&type=nightly
(I used cm-10.1-20121231-NIGHTLY-d2vzw.zip)
Now put this on your internal SD card as well and hold the power button for 2 seconds and press restart then select recovery. Now that you're back into the recovery menu CLEAR ONLY CACHE then install the new CM10.1 nightly you just put on your internal SD and then re-install Gapps 4.2.1 from before and reboot. This all worked for me and writing this message is the first thing I wanted to do afterward to make sure no one has to go through the frustration and heartache of constantly failing at installing the ROM they want. I hope this helps at least one person, if you have any questions I will try and answer them to the best of my knowledge but I'm fairly new to all of this.
Or you can just flash CM10.1 first and do this.......
Tap the 4 corners of the screen to bypass activation screen then go into settings> more> mobile networks> and change CDMA Subscription to RUIM/SIM and System Select to Automatic then reboot...
Click to expand...
Click to collapse
Dirty flashing CM10.1 over CM10 is a much longer way then just clicking a couple buttons Its simply the fact that CM10.1 doesnt have the correct cdma subscription on default boot for our phone.
x714x said:
Or you can just flash CM10.1 first and do this.......
Dirty flashing CM10.1 over CM10 is a much longer way then just clicking a couple buttons Its simply the fact that CM10.1 doesnt have the correct cdma subscription on default boot for our phone.
Click to expand...
Click to collapse
I have everything working properly now but I wish I would've known this was the matter that would've fixed my problem without all these extra issues. Now my phone app is crashing in the 12-31-12 version of CM10.1. It just suddenly started happening and I can't seem to get around it.
Bosli said:
I have everything working properly now but I wish I would've known this was the matter that would've fixed my problem without all these extra issues. Now my phone app is crashing in the 12-31-12 version of CM10.1. It just suddenly started happening and I can't seem to get around it.
Click to expand...
Click to collapse
Clear it's cache APPS > ALL > PHONE APP > Clear Cache.
x714x said:
Or you can just flash CM10.1 first and do this.......
Dirty flashing CM10.1 over CM10 is a much longer way then just clicking a couple buttons Its simply the fact that CM10.1 doesnt have the correct cdma subscription on default boot for our phone.
Click to expand...
Click to collapse
What are the correct settings?
I have been doing this a while... and I was already on the 10.0 stable build. So I flashed the 10.1 nightly... Now Play Store closes immediately after opening. I have tried to uninstall and install from .apk without success. CWRM opens and closes immediately , also uninstalled and reinstalled from .apk without success (You can get to it from booting to it with the phone off ). My Gmail app and account nowhere to be found. My attempt to go back to 10.0 were unsuccessful.
I've figured out how to fix it! First, I went to Section 5 of this http://forum.xda-developers.com/showthread.php?t=1762709 thread and odin-ed back to stock. Next I fixed my IMEI using a guide I found on xda. It was the second part of thishttp://forum.xda-developers.com/showthread.php?t=1804117 thread that says "IMEI is already corrupt".
Next, I did a bunch of things that I don't think I should have done and I ended up with a soft brick phone so I went and flashed back to stock via odin by following this http://forum.xda-developers.com/showthread.php?t=1840030 guide. I don't really know if it was necessary and I ended up getting stuck on the activation screen. If at any time you can not get past the activation screen, the third post down from here shows how to get past it so you could go to your settings and check them out or unlock your bootloader or whatever it is you need to do. But this whole part may not be necessary.
This is the part that I think completely fixed the phone. Probably the most important part of this whole guide. You have to dial *2767*3855# from a completely stock rom (root66 or others). It factory reset my phone and somehow the calls work, although it always says I'm roaming
A couple days ago I rooted my s3 and flashed the CM10.1 ROM. It had problems with mobile data and connecting to 4G and phone calls, so I tried out a bunch of different ROMs before deciding it had to be something else.
I figured out that my IMEI had been erased and since I didn't have it backed up (and I have no idea where my nandroid backup is or what happened to it) I had to manually restore it using some NV items reader writer tool and some other similar tool. It worked but there was something else, I think it was called ERI, was set to none. I kept trying stuff and ended up doing a factory reset. I attempted to unroot my S3, I have no idea if I succeeded in unrooting.
What I just did was soft brick my s3, not completely sure how, but I did then re flash root66 using odin successfully and now I'm back to the activation screen. Now it is stuck trying to activate the phone, but it fails every-time, and I can't do anything but restart the phone. So I restart the phone and have to go through the set up screen again and it tries to re-activate but fails and goes through the whole thing again.
Could someone please help me?
According to the Verizon website the phone is activated.
Update 8:24 PM EST: I have gotten past the activation screen but it says that the phone is out of service and when I try to call someone it says that the "mobile network is not available". Please help.
Since nobody is here to answer me, I will post the answer once I figure out what to do, just in case somebody in the future has the same problem.
I'm going to start by re-rooting my phone. I'll let you know how that goes and if anybody else could help me out that would be great. Thanks.
UPDATE 7:45PM EST:
I successfully re rooted the phone via odin and tried to start it up to no avail. Next I tried to flash a ROM, but I must have forgotten to unlock the bootloader since I couldn't even get the phone to boot completely. Right now I'm flashing back to the vzw root66 rom and then I'm going to re root and try to unlock the boot loader.
UPDATE 8:07PM EST:
I finally figured out how to get past the activation screen and I unlocked my bootloader. Before I flash AOKP I'm going to see if I could fix everything else. I think I'm pretty close to a solution. If anybody else is having the same problem send me a message or reply here, I'll try to answer your questions if you let me know what you've done.
I really just need a way past the activation screen. After that I think I could figure out what to do.
Sorry your having problems. I wish I could help but never ran into that problem so everything you said went over my head otherwise I would of fine a lot of research. At least now you are learning more and more.I just figured I would respond since no one else did.Good luck.
Sent from my SCH-I535 using xda premium
http://forum.xda-developers.com/showpost.php?p=30182790&postcount=1
Have you tried this?
defkult said:
http://forum.xda-developers.com/showpost.php?p=30182790&postcount=1
Have you tried this?
Click to expand...
Click to collapse
Yes, I managed to bypass the activation screen but now I still can not make any calls.
mikeman45 said:
Sorry your having problems. I wish I could help but never ran into that problem so everything you said went over my head otherwise I would of fine a lot of research. At least now you are learning more and more.I just figured I would respond since no one else did.Good luck.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks.
Well I suppose it is hard for a phone to make calls when it isn't activated.
Goodluck on your quest though.
Thanks for the help, I finally got it working.
myoussef0 said:
Thanks for the help, I finally got it working.
Click to expand...
Click to collapse
What was the main problem?
Sent from my SCH-I535 using xda premium
In case someone else has this problem...When I flashed pure 4.2.1, I couldnt get past activation and then found out how to bypass the screen. Tap once in each corner of the screen to bypass activation screen. Then once at home screen go to settings>more(right below WiFi/Bluetooth/data)>mobile networks>CDMA subscription. NV will be selected, change it to RUIM/SIM. Reboot phone. Worked perfectly for me.
No mobile network found
jmarch said:
In case someone else has this problem...When I flashed pure 4.2.1, I couldnt get past activation and then found out how to bypass the screen. Tap once in each corner of the screen to bypass activation screen. Then once at home screen go to settings>more(right below WiFi/Bluetooth/data)>mobile networks>CDMA subscription. NV will be selected, change it to RUIM/SIM. Reboot phone. Worked perfectly for me.
Click to expand...
Click to collapse
Thanks for this post. I ran into the same problem (flashing CM 10.1) with my first S3 phone but did not know how to fix it (wish I saw your post ahead of time). I returned phone to stock via Odin and was able to exchange for a second S3 phone via Verizon (since I have phone insurance). I flashed AOKP ms 1 (jb 4.1.2) on second S3 phone and noticed it was hanging on activation and also said no mobile network when trying to make a call. Luckily, the phone spontaneously rebooted on its own and then started working. Previous to my first S3 phone, I had a Galaxy Nexus. Never ran into any problems with the Galaxy Nexus and almost tempted to go back to it since the S3 seems buggy when flashing a new rom. I am afraid I'm going to brick yet another S3 and be out $400 since I don't think phone insurance will allow me to exchange a second time since this probably alert them to the fact that I'm flashing custom roms.
Also, under mobile networks>system select be sure to change from home to automatic. Reboot.
jmarch said:
Also, under mobile networks>system select be sure to change from home to automatic. Reboot.
Click to expand...
Click to collapse
All was working fine until I tried to do this. At first nothing was selected and everything was working, but when I tried selecting automatic and rebooted it selected home for me and it is impossible to change back to automatic without it automatically changing it back to home against my will.
My main question is are there currently any working methods to root my phone from 4.1.1
BackStory:
I rooted my phone about 4 months ago successfully. about a month ago i started getting update notifications from VZW to update to 4.1.1 Which would have been great since i was looking forward to jellybean.
Unfortunately their update kept failing. so i decided this morning to use Synergy and just run a custom rom. Followed all the instructions and everything went very smoothly while playing around with my new rom i decided to reboot to test the speed of the boot time. upon reboot im greeted by the VZW soft brick screen.
So i then followed the instructions listed here: http://forum.xda-developers.com/showthread.php?t=1840030
To restore my phone to factory default. which was fine i don't really mind losing my data nothing that isn't backed up on Google.
I decided to fully update the phone and then try to re-install the synergy rom but i cant seem to find any detailed threads on the subject.. Help?
Reciprocate said:
My main question is are there currently any working methods to root my phone from 4.1.1
BackStory:
I rooted my phone about 4 months ago successfully. about a month ago i started getting update notifications from VZW to update to 4.1.1 Which would have been great since i was looking forward to jellybean.
Unfortunately their update kept failing. so i decided this morning to use Synergy and just run a custom rom. Followed all the instructions and everything went very smoothly while playing around with my new rom i decided to reboot to test the speed of the boot time. upon reboot im greeted by the VZW soft brick screen.
So i then followed the instructions listed here: http://forum.xda-developers.com/showthread.php?t=1840030
To restore my phone to factory default. which was fine i don't really mind losing my data nothing that isn't backed up on Google.
I decided to fully update the phone and then try to re-install the synergy rom but i cant seem to find any detailed threads on the subject.. Help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2046439
Reciprocate said:
My main question is are there currently any working methods to root my phone from 4.1.1
BackStory:
I rooted my phone about 4 months ago successfully. about a month ago i started getting update notifications from VZW to update to 4.1.1 Which would have been great since i was looking forward to jellybean.
Unfortunately their update kept failing. so i decided this morning to use Synergy and just run a custom rom. Followed all the instructions and everything went very smoothly while playing around with my new rom i decided to reboot to test the speed of the boot time. upon reboot im greeted by the VZW soft brick screen.
So i then followed the instructions listed here: http://forum.xda-developers.com/showthread.php?t=1840030
To restore my phone to factory default. which was fine i don't really mind losing my data nothing that isn't backed up on Google.
I decided to fully update the phone and then try to re-install the synergy rom but i cant seem to find any detailed threads on the subject.. Help?
Click to expand...
Click to collapse
hey guy my question is did u unlock ur bootloader before rebooting also remember if u can manually boot into cwm u can redo the rom its either the up volume or down plus multi function button and power button at same time to go right to cwm
wingtytn said:
hey guy my question is did u unlock ur bootloader before rebooting also remember if u can manually boot into cwm u can redo the rom its either the up volume or down plus multi function button and power button at same time to go right to cwm
Click to expand...
Click to collapse
I think i actually locked it after i finished the install. And then restarted, do softbricks occur when you re-lock your bootloader?
Also another question..is there any way to check the /system /data partitions from inside the phone (terminal app maybe?) are correctly set to r/w over r/o (i don't like unplanned installs )
Soft bricks always occur on a locked bootloader. There are file managers that can do that like solid explorer.
jmxc23 said:
Soft bricks always occur on a locked boot loader. There are file managers that can do that like solid explorer.
Click to expand...
Click to collapse
Ah dully noted in the future the boot loader will be left unlocked! and thanks for the app recommendation i downloaded it and checked all my permissions I'm slightly less terrified to restart my phone now
thanks for all you help
I was running slim 4.2.1 for quite some time with no problems, i loved it. I flashed 4.2.2 and my phone got stuck in NV and my phone number would come up as 000-000-3370. On first boot everything seems to be fine except that i get an error when i try to open up the play store. On my next boot is when I would see these problems. I tried everything from dirty flashing from a working 4.2.1 rom to completely formatting everything, even my external sd, and the same thing happens. This happens with every 4.2.2 rom out there. When i reboot i get stuck on the activating screen and my phone will get stuck in NV and ruim/sim wont stick no matter what i do. i don't know what else to do. someone please help!
It isn't a rom issue it is an S 3 issue that randomly occurs when flashing ROMs. You will have to flash the stock rom and reprovision your phone. I know because it has happened to me twice and both times it was with a Touchwiz ROM. You should have backed up your IMEI just in case this happens.
my imei is backed up. but why is it only 4.2.2 roms that do this?
I was able to flash back to a 4.2.1 Rom, namely pure Google for now, with no problems. but when I flash any 4.2.2 Rom the same thing happens.
All 4.2 ROMs used to do this to me.
However.
Only also happened when I flashed miui.
Now I run liquid smooth and haven't had the problem since.
sent from that young galaxy.
God bless the American people!
do u guys think I should Odin back to stock, then root, unlock, and try to flash 4.2.2?
Actually, there is an easier way
I have had this happen numerous times and it lef me to mess with my phone a little bit. I originally thought that setting it to CDMA/SIM and then rebooting would fix the problem, but I found a simpler solution to that. The last time I encountered the problem I simply set the phone to RUIM/SIM under mobile networks and then Turned on airplane mode for a few seconds then turned it off and I found my number under phone settings and everything. Try that and let me know how it goes.
Edit: Sorry, the term is RUIM/SIM, not CDMA/SIM. My bad.
hmmm, I'll definitely give that a shot later on tonight.
well I tried it, it works. but only temporarily. once I reboot it reverts back to how it was. any other thoughts?
anyone?
Chitala383 said:
anyone?
Click to expand...
Click to collapse
try this. i had the same problem. http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
nope, none of that works either. no matter what I do ruim/sim will not stick on a reboot on any 4.2.2 Rom. I'm really getting frustrated with this.
no one has any other solutions for me?
Chitala383 said:
anyone?
Click to expand...
Click to collapse
Does your phone display an IMEI number?
Settings->About->Status
Don't need the number, just to know if you have it there....
Also do you still have Root/Unlocked bootloader?
yes, i have an imei. i lost it once before so now its backed up, i'll never make that mistake again. it was a nightmare trying to get it back. and yes, i am rooted and unlocked.
Chitala383 said:
yes, i have an imei. i lost it once before so now its backed up, i'll never make that mistake again. it was a nightmare trying to get it back. and yes, i am rooted and unlocked.
Click to expand...
Click to collapse
Have you done a complete factory restore through Odin? You would lose root and unlocked bootloader, but it may be faster to restore to stock, and reroot/mod than to try to find an "easy" fix. I was having some issues the other day in between a few ROM's, but I just factory restored, and restarted from "scratch". Now I am running perfect.
You may have already tried, but on page 1 you asked if you should, and I did not see a confirmation you did so.
Had the same problem... And yes, the phone must be reprovisioned. Although sometimes you can just adjust the network settings and change it from NV. That worked for me also.
Sent from my SCH-I535 using Tapatalk 2
I flashed root 66 via Odin, bootloop. flashed the ma2 stock image, bootloop. then flashed the lk3 stock image with success. but still with the same results as before.
tomorrow I'll try flashing g1 and start from scratch there. what do u guys think?
well, I odin'd back to bone stock G1, rooted with rootdebugfs, flashed cwm with ez recovery, unlocked my bootloader with ez unlock, flashed liquidsmooth 4.2.2 rc2 and guess what. same ****!!!!!!!!!!!!! i'm really getting fed up with this. someone has to have a solution to this cuz this is really pissing me off.